CY7C68003-24LQXIT USB 2.0 Transceiver | Infineon
Артикул: CY7C68003-24LQXIT ✓ АктивенCY7C68003-24LQXIT Обзор
A USB transceiver is an interface IC that converts signals between a USB controller and the physical USB data path. In the broader hierarchy, this USB interface transceiver belongs to the semiconductor and interface-controller category. The term MoBL-USB identifies the low-power USB controller family associated with the CY7C68003, while TX2UL identifies the transceiver configuration described for this exact device.
The verified product listings identify the part as a one-transceiver, full-speed USB 2.0 solution rather than a multi-channel USB hub controller. Its stated 24-QFN construction supports compact PCB integration, and the exposed-pad package description provides a practical thermal path when the device is used with sustained USB activity. The exact electrical limits, voltage ratings, and signal timing should be confirmed against the manufacturer datasheet before release.
Typical implementation choices include portable-device controllers, USB-to-serial adapters, embedded USB connectivity, and compact peripheral interfaces. These applications benefit from a dedicated transceiver that separates controller-side signaling from the USB physical connection. Firmware and board-level design must also account for the controller's operating state, USB power requirements, signal routing, and the transceiver's enable or sleep behavior.
The most important layout consideration is controlled USB differential routing. Place input and output decoupling capacitors close to their associated supply pins, preserve the recommended return-path continuity beneath the interface, and avoid routing USB signals through areas affected by switching nodes. The exposed pad should be connected according to the manufacturer land-pattern and thermal-via guidance.
This page consolidates the exact package, USB classification, transceiver ratio, lifecycle-facing distributor context, and source links for CY7C68003-24LQXIT. It also provides practical application guidance, a parameter comparison framework, and explicit notes for identifying a true pin-compatible replacement rather than relying only on a similar USB transceiver description.
Аналоги без доработки для CY7C68003-24LQXIT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CY7C68003-24LQXIT (тот же форм-фактор и посадочное место) — отличается по Package.
CY7C68003-20LQXI
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY7C68003-24LQXC
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY7C68003A-24LQXIT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY7C68003A-24LQXI
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY7C68003A-20LQXI
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CY7C68003-24LQXIT Характеристики
| Device Type | 1/1 Transceiver |
| USB Version | Full USB 2.0 |
| Transceiver Configuration | 1/1 transceiver |
| Product Family | MoBL-USB |
| Functional Designation | TX2UL USB 2.0 ULPI Transceiver |
| Корпус | 24-QFN (4 mm x 4 mm) |
| Alternate Package Description | 24-UFQFN Exposed Pad |
| Тип монтажа | Surface Mount |
| Number of Transceivers | 1 |
| Interface Category | USB Interface IC |
| Device Classification | Driver and Receiver |
Руководство по цоколевке CY7C68003-24LQXIT в корпусе 24-ufqfn exposed pad
Цоколевка для CY7C68003-24LQXIT (корпус 24-ufqfn exposed pad). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для CY7C68003-24LQXIT.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CY7C68003-24LQXIT подходит для 6 применениеs: Compact USB-to-Serial Adapters, Embedded USB Connectivity, Portable Device USB Ports, Industrial USB Control Modules, USB-to-Peripheral Bridge Designs, Data Acquisition and Test Equipment.
Compact USB-to-Serial Adapters
The CY7C68003-24LQXIT fits a USB-to-serial adapter when the selected controller supports a ULPI transceiver interface and full-speed USB 2.0 operation. Its 1/1 transceiver arrangement and 24-QFN 4 mm by 4 mm package help preserve a compact board footprint. The design should place local decoupling close to the device, follow the documented exposed-pad pattern, and route the USB differential pair as a controlled impedance pair. Verify supply compatibility, clock requirements, reset timing, and suspend behavior against the manufacturer datasheet before releasing the PCB.
Рекомендуется
Embedded USB Connectivity
CY7C68003-24LQXIT provides a dedicated full-speed USB 2.0 physical interface for embedded processors and controllers that do not integrate a matching external transceiver. Its 24-QFN package is suitable for space-constrained embedded boards, while the 1/1 arrangement serves one USB connection. Implementation must preserve signal integrity between controller and transceiver, provide the required local supply decoupling, and connect the exposed pad according to the manufacturer layout guidance. Validate enumeration, suspend, reset, and clock behavior during firmware qualification.
Рекомендуется
Portable Device USB Ports
The CY7C68003-24LQXIT can support a compact full-speed USB 2.0 port in a portable device when its documented supply and timing requirements match the host controller. The 4 mm by 4 mm 24-QFN package reduces board area, and the 1/1 configuration matches designs requiring one USB transceiver. Keep the differential connection short, control impedance through the complete board stack-up, and separate USB routing from switching-converter and display-related noise sources. Confirm low-power and suspend behavior against the final system requirements.
Рекомендуется
Industrial USB Control Modules
CY7C68003-24LQXIT is applicable to compact industrial control modules requiring a full-speed USB 2.0 service or configuration port. The surface-mount 24-QFN package supports automated assembly, while the 1/1 transceiver arrangement suits a single-host USB interface. Industrial designs should account for the complete operating-temperature specification, connector and ESD protection, grounding, and transient immunity at the board level. Use the manufacturer land pattern for exposed-pad soldering and confirm supply sequencing before production release.
Рекомендуется
USB-to-Peripheral Bridge Designs
CY7C68003-24LQXIT can be used in a USB-to-peripheral bridge when the source controller requires a full-speed USB 2.0 transceiver and the bridge uses the documented MoBL-USB TX2UL architecture. The 24-QFN package allows the bridge to remain compact, and the single-transceiver arrangement maps naturally to one USB port. Designers should verify ULPI signal levels, reference-clock requirements, reset polarity, and low-power transitions. Add connector-side protection and verify routing against the actual USB channel impedance budget.
Рекомендуется
Data Acquisition and Test Equipment
The CY7C68003-24LQXIT is appropriate for acquisition equipment that needs a compact full-speed USB 2.0 connection to a host controller. Its 24-QFN 4 mm by 4 mm package can simplify dense instrument boards without changing the documented USB interface arrangement. Signal-integrity work is especially important where USB data crosses between the transceiver and controller, so use short balanced routes, continuous reference planes, and correctly designed decoupling. Confirm timing, supply, and operating-temperature limits for the intended measurement environment.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CY7C68003-24LQXIT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | Infineon Technologies |
| Package | 24-QFN (4 mm x 4 mm) |
| Device Type | 1/1 Transceiver |
| USB Version | Full USB 2.0 |
| Transceiver Ratio | 1/1 |
| Product Family | MoBL-USB |
| Functional Designation | TX2UL USB 2.0 ULPI Transceiver |
| Mounting Type | — |
| Package Description | 24-UFQFN Exposed Pad |
| Interface Category | USB Interface IC |
Ключевые отличия
- Defined single-port USB 2.0 transceiver configuration (против CY7C63743-SXC)
- Compact 24-QFN package for board-space-sensitive designs (против CY7C63743-SXC)
- MoBL-USB TX2UL implementation association (против CY7C63743-SXC)
Заметки по проектированию
Use the manufacturer land pattern for the 24-QFN 4 mm by 4 mm package and preserve the exposed-pad connection exactly as documented. Place local decoupling capacitors close to the corresponding supply pins and provide an uninterrupted ground reference beneath the device. The package description identifies an exposed pad, making thermal-via placement and solder-joint inspection important during qualification. Do not replace the exposed pad with an arbitrary thermal-only pad because the pad may also carry an electrical function.
Route the USB differential pair as a controlled-impedance pair over a continuous reference plane, minimize stub branches, and avoid routing through noisy power-converter or clock-switching regions. Keep the transceiver-to-controller interface traces short and preserve the spacing recommended by the manufacturer layout guidance. Differential USB routing quality affects rise-time distortion and eye margin, so verify the complete board stack-up and connector path with suitable signal-integrity analysis.
Do not treat the shortened family name CY7C68003 as proof that every ordering suffix is interchangeable. Verify the complete suffix, package drawing, exposed-pad implementation, temperature range, and lifecycle status for CY7C68003-24LQXIT. Also confirm controller compatibility for ULPI signaling, supply voltage, clocking, reset, and suspend behavior. Similar USB transceiver descriptions do not establish pin-to-pin compatibility or equivalent timing.
Although SOA data are not applicable to this interface IC, exposed-pad construction still requires attention to soldering and heat spreading. Use the documented pad geometry and thermal-via arrangement, maintain adequate copper where the design permits it, and validate assembly quality through inspection. Check the manufacturer operating-temperature range against the enclosure temperature, while recognizing that connector and controller dissipation can be more influential than the transceiver's own contribution.
Информация о соответствии
No definitive compliance declarations for the exact CY7C68003-24LQXIT orderable suffix were included in the product sources. Obtain current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documentation from the manufacturer for the exact shipping configuration.