CY8C26443-24PI - 24MHz 8-Bit 16KB Flash MCU | Infineon
Артикул: CY8C26443-24PI ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
CY8C26443-24PI Обзор
A programmable system-on-chip is a microcontroller architecture that combines a CPU, memory, programmable digital blocks, analog resources, and configurable peripherals in one semiconductor. PSoC 1 belongs to the microcontroller and embedded-semiconductor hierarchy; its mixed-signal resources allow sensor conditioning, control, communication, and user-interface functions to be implemented in a single device rather than through a fixed-function combination of separate ICs.
Verified distributor information identifies the device as an M8C PSoC 1 CY8C26xxx part with an 8-bit architecture, 24 MHz operating frequency, 16 KB organized as 16K x 8 Flash memory, and a 28-PDIP package. The family integrates a programmable mixed-signal array with an onboard controller. These verified values make the part suitable for embedded controls where local logic, analog measurement, and compact through-hole assembly are required.
The 28-pin plastic DIP package supports conventional PCB mounting and prototyping, while the 24 MHz M8C processor provides the timing headroom expected from this legacy embedded family. The supplied sources emphasize the device identity and basic architecture but do not provide verified peripheral counts, voltage limits, ADC resolution, timer counts, or operating-temperature limits, so those values remain unspecified rather than being inferred.
Typical design uses include industrial control modules, sensor-interface controllers, small motor-control systems, building-control equipment, and mixed-signal instruments. The programmable architecture is valuable when product variations can be addressed through configuration instead of a large discrete BOM. Developers must nevertheless verify the exact PSoC configuration, firmware image, resource assignments, and board behavior before production.
For new hardware, begin with the manufacturer datasheet and confirm all 28 pin assignments, supply requirements, programming connections, and mixed-signal resource availability. PSoC Designer and the associated device support flow may be relevant for configuring and programming this family, but tool-version availability should be confirmed before committing a design.
This page combines the verified distributor identity, package and memory data with practical sourcing and design guidance. It deliberately distinguishes verified facts from parameters that were not supplied, helping engineers evaluate the CY8C26443-24PI without confusing a family-level capability with a guaranteed orderable-device specification.
Аналоги без доработки для CY8C26443-24PI — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиCY8C26443-24PI Максимальные параметры и электрические характеристики
| Product Type | 8-bit programmable system-on-chip mixed-signal microcontroller |
| Manufacturer | Infineon Technologies |
| Device Series | PSoC 1 CY8C26xxx |
| CPU Architecture | 8-bit |
| Processor Core | M8C |
| Максимальная тактовая частота | 24 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| Programmable Architecture | Mixed-signal array with onboard controller |
| Корпус | 28-PDIP |
| Package Type | Plastic dual in-line package |
| Число выводов | 28 pins |
| Способ монтажа | Through-hole |
Руководство по цоколевке CY8C26443-24PI в корпусе plastic dual in-line package
Цоколевка для CY8C26443-24PI (корпус plastic dual in-line package). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для CY8C26443-24PI.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CY8C26443-24PI подходит для 6 применениеs: Industrial Embedded Control, Sensor Interface Controller, Small Motor and Relay Control, Building and HVAC Control, Mixed-Signal Instrumentation, Legacy Equipment Maintenance.
Industrial Embedded Control
The CY8C26443-24PI fits legacy industrial control modules that benefit from an 8-bit M8C processor at 24 MHz and 16 KB of Flash while retaining a through-hole 28-PDIP footprint. Its PSoC mixed-signal architecture can consolidate configurable control logic with analog-related functions, reducing board area compared with a fixed-function MCU plus separate peripheral ICs. The verified data does not specify supply voltage, I/O limits, timers, or operating temperature, so an engineer must confirm those parameters in the manufacturer datasheet before assigning the device to a new industrial product. Existing PSoC firmware expertise and the 28-pin package may make this especially practical for maintenance platforms, test fixtures, and equipment controllers that already use the CY8C26xxx family.
Рекомендуется
Sensor Interface Controller
The programmable mixed-signal array makes the CY8C26443-24PI a candidate for sensor conditioning and acquisition front ends where analog and digital functions must coexist in a compact controller. Its verified 24 MHz M8C core provides the clocking basis for configurable digital blocks, while 16 KB of Flash stores application firmware. The supplied sources do not specify ADC resolution, input count, comparator resources, analog voltage limits, or sampling rate; these are critical missing items for an actual sensor design. Engineers should map the sensor output range to the verified electrical limits in the full datasheet, prototype noise and filtering behavior, and use the PSoC configuration flow to avoid assigning resources that are unavailable on the exact orderable device.
Рекомендуется
Small Motor and Relay Control
The 24 MHz 8-bit M8C processor can support timing-based control tasks in compact relay, solenoid, or small motor-control boards, while the PSoC architecture allows some digital functions to be implemented in configurable logic. The 28-PDIP package is useful for prototypes, educational platforms, and maintenance hardware where through-hole soldering and socketed replacement are preferred. The verified results provide no motor-driver outputs, PWM channels, current ratings, or thermal data, so this MCU must not be treated as a direct power-stage driver. Use suitable transistors, drivers, protection components, and an independent thermal review. Firmware should include conservative startup states and disabled outputs until supply voltage and sensor conditions are valid.
Рекомендуется
Building and HVAC Control
The CY8C26443-24PI can serve as the controller in a small building-control module that coordinates discrete inputs, timing logic, and low-power outputs. Its PSoC mixed-signal resources may reduce component count when the design must support several sensor and switching functions. The verified 16 KB Flash and 24 MHz clock are concrete constraints, but no power-consumption, supply, temperature, or communication peripheral specifications were supplied. Before using it for HVAC equipment, verify isolation strategy, relay-driver margins, fail-safe states, environmental ratings, and any regulatory requirements applicable to the finished product. A prototype should exercise startup, sensor faults, communication loss, and power cycling under worst-case load conditions.
Рекомендуется
Mixed-Signal Instrumentation
A programmable mixed-signal PSoC is useful in instrumentation that must coordinate measurement, control logic, and data handling in one embedded platform. CY8C26443-24PI provides the verified 8-bit M8C core at 24 MHz and 16 KB of Flash, making it appropriate for compact laboratory or industrial instruments with bounded firmware requirements. However, the supplied snippets do not specify converter accuracy, analog bandwidth, reference accuracy, noise, calibration, or memory-map details. Engineers should compare those missing parameters against the measurement specification, account for calibration and drift, and isolate analog and digital return paths appropriately. Do not infer precision instrumentation performance from the PSoC name alone.
Рекомендуется
Legacy Equipment Maintenance
CY8C26443-24PI is particularly relevant to maintenance designs that must reproduce an existing 28-PDIP controller rather than redesign the board around a different package. The verified device identity, 8-bit M8C architecture, 24 MHz clock, and 16 KB Flash allow engineers to confirm basic identity before ordering replacements. A successful substitution still requires exact pinout, electrical-limit, clock, memory, peripheral-resource, programming, and firmware verification. If the original design uses a discontinued software toolchain, obtain a controlled copy of the project and validate reprogramming before installation. This application prioritizes compatibility and traceability over feature expansion.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CY8C26443-24PI — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Ключевые отличия
- Legacy-compatible 28-PDIP PSoC identity (против CY8C27443-24SXI)
- Verified 24 MHz processing capability (против CY8C27443-24SXI)
- Verified 16 KB Flash configuration (против CY8C27443-24SXI)
Заметки по проектированию
Do not substitute a functionally related PSoC without checking the exact 28-PDIP footprint. The supplied community reference mentions CY8C27443-24SXI, but it uses an SOIC package and an adapter, so it is not a transparent drop-in replacement. Validate pin mapping, supply limits, clock configuration, memory, programming connections, and firmware resource compatibility before prototyping a board revision.
Design the PCB around the verified 28-PDIP footprint, but obtain the official package drawing and complete pin table before routing. Keep programming and debug access accessible, provide adequate decoupling according to the manufacturer guidance, and isolate analog and digital return paths where the PSoC mixed-signal array is used. Do not infer electrical pin functions from the distributor snippet.
PSoC Designer configuration determines which digital blocks and analog resources are active, so a firmware and routing review belongs in the hardware design process. Confirm the selected clock path and peripheral assignments in the final project, keep sensitive measurement traces away from fast switching nodes, and test startup and reconfiguration behavior across the complete intended supply range.
Информация о соответствии
The supplied Verified Web Data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred.
