Infineon

CY8C3445LTI-095 - 32KB 8-Bit 50MHz PSoC | Infineon

Артикул: CY8C3445LTI-095 ✓ Активен
68-pin QFN, 8 mm x 8 mm Package 50 MHz Speed 32 KB Memory
MOQ: 1 |

CY8C3445LTI-095 Обзор

Infineon Technologies CY8C3445LTI-095 is an 8-bit programmable system-on-chip microcontroller featuring a 50 MHz 8051 core, 32 KB of embedded flash memory, and a 68-pin QFN package measuring 8 mm by 8 mm. It combines a microcontroller core with programmable digital and analog resources in one integrated device, allowing compact embedded designs to consolidate control logic, sensing, and signal conditioning.

A programmable system-on-chip, or PSoC, is an integrated semiconductor that places a CPU, programmable digital blocks, analog blocks, and communication peripherals within a unified device. The PSoC family occupies the microcontroller level of the broader embedded semiconductor hierarchy. By configuring hardware blocks rather than relying only on fixed peripheral functions, engineers can adapt a design to different control, measurement, or interface requirements while limiting board area and external component count.

The CY8C3445LTI-095 is identified as an 8-bit MCU with an 8051-compatible core operating up to 50 MHz. Its 32 KB flash capacity provides program storage for embedded control firmware, while the 68-QFN package supports dense PCB layouts. The -095 ordering code identifies a specific speed, temperature, and package configuration, so designers should confirm the complete ordering information against the manufacturer documentation before production release.

PSoC 3 devices combine programmable digital and analog functions with embedded memory and standard serial peripherals. The programmable architecture can support timing, control, data acquisition, signal conditioning, and communications tasks. Peripheral configuration is typically handled through development software, making the device suitable for applications that benefit from reusable hardware configurations and rapid adaptation without redesigning a fixed-function controller.

Typical uses for the CY8C3445LTI-095 include industrial sensing and control modules, building automation endpoints, motor and power-system controllers, consumer interfaces, and compact instrumentation. Its 50 MHz processing headroom supports responsive control loops, while the 32 KB embedded flash is appropriate for compact firmware with protocol handling, state management, and application logic.

PCB design should prioritize a clean supply network, decoupling near the power pins, and careful routing of sensitive analog and high-speed digital signals. The 8 mm by 8 mm QFN footprint also requires a deliberate escape strategy for its fine-pitch leads, and thermal performance should be checked against the board copper available beneath the package. Use the manufacturer pin-description and recommended-layout material when assigning tracks.

This page combines the exact device identity, package information, current sourcing context, and application-oriented engineering guidance. It also identifies drop-in alternatives from the same PSoC 34xxx family and separates known device attributes from specifications that require confirmation in the manufacturer datasheet, helping engineers plan a controlled replacement or design review.

Аналоги без доработки для CY8C3445LTI-095 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

CY8C3445LTI-085

✅ Прямая замена ⚠️ Характеристики не проверены
📦 68-QFN (8 mm x 8 mm)
Same 68-QFN family footprint and 32 KB flash, but the -085 speed grade operates below the target's 50 MHz maximum

📋 Справочный аналог (нет в каталоге)

CY8C3446LTI-095

✅ Прямая замена ⚠️ Характеристики не проверены
📦 68-QFN (8 mm x 8 mm)
Same 50 MHz class and 68-QFN footprint, with 64 KB flash instead of 32 KB, providing 32 KB more program memory

📋 Справочный аналог (нет в каталоге)

CY8C3446LTI-085

✅ Прямая замена ⚠️ Характеристики не проверены
Infineon
📦 68-QFN (8 mm x 8 mm)
8-bit PSoC 3 microcontroller · 8051, single core · 50 MHz · 64 KB (64K x 8) · 8 KB · 2 KB · 8 KB · 1.71 V to 5.5 V

Уточнить цену

Открыть даташит →

CY8C3447LTI-095

✅ Прямая замена ⚠️ Характеристики не проверены
📦 68-QFN (8 mm x 8 mm)
Same 50 MHz operating class and 68-QFN family package, with a different CY8C34xx memory configuration requiring firmware review

📋 Справочный аналог (нет в каталоге)

CY8C3447LTI-085

✅ Прямая замена ⚠️ Характеристики не проверены
📦 68-QFN (8 mm x 8 mm)
Same 68-QFN family footprint and 8051-class architecture, but both the memory configuration and lower -085 speed grade differ

📋 Справочный аналог (нет в каталоге)

CY8C3445LTI-095 Максимальные параметры и электрические характеристики

Device Type Programmable System-on-Chip (PSoC) microcontroller
CPU Architecture 8-bit 8051 core
Maximum CPU Frequency 50 MHz
Embedded Flash Memory 32 KB
Flash Organization 32K x 8 bits
Корпус 68-pin QFN, 8 mm x 8 mm
Тип монтажа Surface mount
Operating Frequency Range Up to 50 MHz

Руководство по цоколевке CY8C3445LTI-095 в корпусе 68-pin qfn, 8 mm x 8 mm

Цоколевка для CY8C3445LTI-095 (корпус 68-pin qfn, 8 mm x 8 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 68-pin qfn, 8 mm x 8 mm для CY8C3445LTI-095

Нет подробных данных о распиновке для CY8C3445LTI-095.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

CY8C3445LTI-095 подходит для 6 применениеs: Industrial Sensor and Control Module, Building Automation Endpoint, Motor and Power-System Controller, Consumer Interface Controller, Compact Instrumentation Front End, Programmable Embedded Control Platform.

🏭

Industrial Sensor and Control Module

The CY8C3445LTI-095 fits compact sensing modules that combine sensor excitation, signal conditioning, and local control in one device. Its 50 MHz 8051 core provides enough execution margin for sampling routines, digital filtering, threshold logic, and communication tasks, while 32 KB of flash accommodates application firmware and configuration. The programmable PSoC architecture can allocate digital and analog resources to the control design instead of requiring a separate fixed-function signal-conditioning IC. For an industrial endpoint, the 68-pin QFN package preserves PCB area, although the production design must confirm the exact temperature grade, supply range, and analog specifications before deployment.

🧩

Building Automation Endpoint

A CY8C3445LTI-095-based automation endpoint can monitor inputs, operate local actuators, and maintain communication over a wired or serial network. The 50 MHz 8051 core supports protocol handling and event-driven control, while the 32 KB flash provides room for a compact application image. Programmable digital blocks can implement timing and interface logic, and programmable analog resources can assist with sensor conditioning where their electrical limits meet the design requirements. The small 68-QFN footprint is useful in wall-control or room-sensor housings. Validate standby behavior, available I/O, power sequencing, and network timing because those specifications are not established by the basic 32 KB and 50 MHz device summary.

⚡

Motor and Power-System Controller

The CY8C3445LTI-095 can serve as the supervisory controller in a small motor-control or power-management module. At 50 MHz, the 8051 core can execute state-machine logic, monitor digital fault signals, and coordinate timing functions around a dedicated power-conversion controller. Its 32 KB embedded flash supports compact control and diagnostic firmware, while the PSoC programmable blocks can reduce discrete digital-assist circuitry. The 68-QFN package also leaves room for power components and connectors on a densely populated board. For safety- or industrial-grade equipment, confirm the device's operating-temperature limits, electrical transient margins, and functional-safety requirements before assigning protection or shutdown decisions to it.

📱

Consumer Interface Controller

The CY8C3445LTI-095 is appropriate for compact consumer products requiring an embedded user interface, configurable input handling, and local peripheral control. The 50 MHz 8051 core can manage button or touch-input scanning, display updates, indicator logic, and communication retries, while 32 KB flash stores a focused firmware image. PSoC programmability can consolidate debounce, timing, and signal-conditioning logic that would otherwise occupy separate components. Its 68-QFN land pattern supports compact board layouts in wearables, appliance accessories, and desktop peripherals. Before production, verify low-power requirements, GPIO availability, display-interface timing, and the permitted operating-temperature range because these parameters cannot be inferred from the processor frequency and flash capacity alone.

🔧

Compact Instrumentation Front End

In a compact instrument, the CY8C3445LTI-095 can combine acquisition sequencing, control, calibration data handling, and a local communications task in one programmable platform. The 50 MHz core supports deterministic sampling schedules and background configuration processing, and the 32 KB flash can hold firmware for a focused measurement product. Programmable analog and digital resources make the architecture attractive when measurement conditioning must be adjusted across product variants. The 68-pin QFN package reduces connector and component spacing compared with a large leaded controller. Instrumentation designs should nevertheless verify ADC performance, analog noise, reference accuracy, calibration storage, and timing margins using the detailed electrical characteristics before committing to production measurements.

🖥️

Programmable Embedded Control Platform

The CY8C3445LTI-095 works well as the foundation of a reusable embedded control platform spanning several related products. Programmable PSoC blocks allow timing, control, and interface functions to be reconfigured without moving to a different MCU family, while the 8051 core executes the common application framework. At 50 MHz and with 32 KB of flash, it provides a practical balance between processing margin and embedded storage for compact devices. The 68-QFN package can be shared across closely related board variants if their pin assignments and exposed-pad requirements remain unchanged. A platform release should maintain versioned configuration files, pin-assignment checks, boot-code validation, and hardware abstraction so that peripheral changes do not silently alter production behavior.

Сводка рекомендуемых товаров

STM32G031C8T6TR Alternative compact general-purpose microcontroller for a control-module redesign Используется в: Industrial Sensor and Control Module ATMEGA32-16AU Microchip Technology Используется в: Industrial Sensor and Control Module, Consumer Interface Controller LAN7500I-ABZJ-TR Microchip Technology Используется в: Industrial Sensor and Control Module KSZ8041TLI-TR Microchip Technology Используется в: Building Automation Endpoint KSZ8001LA2TR Microchip Technology Используется в: Building Automation Endpoint TJA1057GTK/3Z NXP Semiconductors Используется в: Building Automation Endpoint STM32G030K6T6TR STMicroelectronics Используется в: Motor and Power-System Controller STM32G031K6T6TR General-purpose microcontroller alternative for a redesigned control platform Используется в: Motor and Power-System Controller BD37067FV-ME2 ROHM Semiconductor Используется в: Motor and Power-System Controller STM32G071C8T6TR STMicroelectronics Используется в: Consumer Interface Controller MAX3221IPWR Texas Instruments Используется в: Consumer Interface Controller STM32G431C8T6TR STMicroelectronics Используется в: Compact Instrumentation Front End STM32G474VET6TR STMicroelectronics Используется в: Compact Instrumentation Front End INA240A3DR Texas Instruments Используется в: Compact Instrumentation Front End STM32G070CBT6TR STMicroelectronics Используется в: Programmable Embedded Control Platform STM32G031J6M6TR STMicroelectronics Используется в: Programmable Embedded Control Platform W77L516A25FL Nuvoton Technology Corporation Используется в: Programmable Embedded Control Platform
What is the CY8C3445LTI-095?
The CY8C3445LTI-095 is an Infineon Technologies 8-bit PSoC microcontroller built around an 8051 core that operates up to 50 MHz. The device includes 32 KB of embedded flash and is packaged in a 68-pin QFN measuring 8 mm by 8 mm. The manufacturer family documentation identifies it as a member of the CY8C34xx PSoC 3 family, combining a microcontroller with programmable digital and analog resources.
How much flash memory does the CY8C3445LTI-095 have?
The CY8C3445LTI-095 contains 32 KB of embedded flash, organized as 32K x 8 bits, according to the device specifications. This flash stores the application firmware, configuration data, and bootloader where applicable. Its 50 MHz 8051 core provides processing performance well above the bandwidth normally required for ordinary control firmware, although final code size depends on the selected PSoC configuration and peripheral set.
What package does the CY8C3445LTI-095 use?
The CY8C3445LTI-095 uses a 68-pin QFN package measuring 8 mm by 8 mm. Its fine-pitch land pattern requires a land grid array footprint with short, symmetric fanout routing from the exposed center pad and perimeter leads. Because the available package library does not contain a dedicated 68-QFN diagram, the product page displays a generic package illustration; engineers should use the official package drawing for PCB dimensions.
Where can I download the CY8C3445LTI-095 datasheet PDF?
The CY8C3445LTI-095 datasheet PDF is accessible through the linked datasheet document and the Octopart datasheet index for this exact MPN. The CY8C34xx family documentation should be used to review the 8051 core, programmable blocks, memory map, electrical limits, package dimensions, and programming information. Verify the ordering-code suffix and device revision against the cover and ordering-information sections before releasing a production design.
Where can I find the CY8C3445LTI-095 pinout?
The CY8C3445LTI-095 pinout is defined in the pin-description and package-drawing sections of the CY8C34xx family datasheet. The device uses a 68-pin QFN arrangement, including its exposed ground pad, so the land pattern must follow the manufacturer drawing rather than a generic 68-pin diagram. Assign PCB nets from the complete pin-description table and preserve the exposed-pad connection specified for thermal and electrical performance.
Is CY8C3445LTI-095 suitable for industrial control applications?
The CY8C3445LTI-095 can be suitable for compact industrial control designs that need an 8051-compatible controller and programmable mixed-signal resources. Its 50 MHz core, 32 KB flash, and 68-QFN package support responsive embedded logic in space-constrained equipment. Industrial suitability still depends on the exact temperature grade, supply limits, certification status, and transient requirements, which must be confirmed from the complete ordering information.
What can replace the CY8C3445LTI-095?
The closest drop-in choices are other configured CY8C34xx PSoC devices that retain the 68-QFN footprint, pin arrangement, and compatible memory and peripheral resources. CY8C3445LTI-085 differs primarily in speed grade, while CY8C3446LTI-095 and CY8C3446LTI-085 provide 64 KB flash instead of 32 KB. Confirm the complete ordering code, exposed-pad implementation, peripheral map, and firmware configuration before treating any candidate as a direct replacement.
What is the best Infineon equivalent for the CY8C3445LTI-095?
The best Infineon equivalent depends on which requirement must remain identical. CY8C3445LTI-085 is the closest speed-grade option for installations limited to the lower operating frequency, whereas CY8C3446LTI-095 provides 64 KB flash while retaining the 50 MHz class of operation. Both are same-family PSoC options, but software image, peripheral configuration, pin multiplexing, and timing must be reviewed before PCB and firmware reuse is approved.
CY8C3445LTI-095 vs CY8C3446LTI-085 - which is better?
The CY8C3445LTI-095 is preferable when the design requires 50 MHz operation and 32 KB of flash. The CY8C3446LTI-085 offers 64 KB of flash but operates at the lower speed associated with the -085 ordering code. Both belong to the 68-QFN CY8C34xx family, but the appropriate choice depends on firmware timing, memory requirements, and whether the larger flash capacity is actually needed.
CY8C3445LTI-095 vs CY8C3446LTI-095 - what is the difference?
The principal documented difference is embedded flash capacity: the CY8C3445LTI-095 provides 32 KB, while the CY8C3446LTI-095 provides 64 KB. Both devices are identified as 8051-core PSoC 34xxx microcontrollers operating up to 50 MHz in 68-QFN packages. Because the -095 suffix is shared, designers should also verify temperature grade, peripheral configuration, and ordering information rather than assuming every device characteristic is identical.
When should I choose CY8C3445LTI-095 over a lower-speed family member?
Choose the CY8C3445LTI-095 when control-loop timing, protocol handling, or mixed-signal processing requires the 50 MHz operating class and the design is constrained to 32 KB of flash. A lower-speed same-family option can be preferable when workload timing permits it and reduced processing margin is acceptable. Review the firmware timing under worst-case interrupt load rather than basing the decision only on the nominal CPU frequency.
Can CY8C3446LTI-095 replace CY8C3445LTI-095?
The CY8C3446LTI-095 can be considered as a same-family drop-in candidate because it retains the 68-QFN PSoC 34xxx form and provides a superset of the documented 32 KB flash capacity at the same 50 MHz operating class. A direct substitution still requires checking the exposed pad, pin multiplexing, peripheral population, voltage limits, temperature suffix, boot configuration, and device identification used by the firmware.
How is the CY8C3445LTI-095 programmed?
The CY8C3445LTI-095 is associated with Cypress/Infineon ISP programming support, and the device-programming index explicitly lists it as an ISP-compatible part. The supported programming tool must match the device package, connector, clock, and programming protocol used by the board. Production procedures should also include blank-device checks, configuration verification, and an approved method for programming the PSoC configuration data.
Where can I buy the CY8C3445LTI-095 and check its lead time?
Use the Request a Quote form on this page to request CY8C3445LTI-095 pricing, current availability, minimum order quantity, and production lead time. The exact MPN appears in current distributor and aggregation listings under Infineon Technologies, but no unqualified quantity-break price was printed in the sources reviewed. A quote response should confirm lifecycle status, package suffix, date code, and shipment quantity before procurement begins.
Is CY8C3445LTI-095 currently in stock?
Current stock status for the CY8C3445LTI-095 should be confirmed through the Request a Quote form on this page. The part is listed by Infineon Technologies across multiple distribution and aggregation sources, indicating broad catalog recognition, but a distributor listing alone does not guarantee an available warehouse quantity. The quote request should specify the required quantity, packaging form, target date, and acceptable date-code range.

Справочные инженерные данные для CY8C3445LTI-095 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the CY8C3445LTI-095 when the design specifically requires an 8-bit 8051-class PSoC with up to 50 MHz operation and 32 KB of embedded flash in a 68-QFN package. It is a sensible fit for compact sensing, control, automation, and programmable embedded platforms that benefit from PSoC configuration flexibility. Select CY8C3445LTI-085 only when the lower speed grade is sufficient and the timing margin remains acceptable. Consider CY8C3446LTI-095 when 64 KB of flash provides useful growth capacity without requiring a different package or software architecture. The CY8C3446LTI-085 and CY8C3447 family options can be considered only after their memory, speed, peripheral, ordering-suffix, and exposed-pad characteristics are checked. No cross-brand drop-in replacement was established from the available cross-reference material, so a platform migration would require board and firmware validation rather than a simple component substitution.

Сравнение с аналогами

Параметр Этот товар CY8C3445LTI-085 CY8C3446LTI-095 CY8C3446LTI-085 CY8C3447LTI-095 CY8C3447LTI-085
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 68-QFN (8 mm x 8 mm) 68-QFN (8 mm x 8 mm) 68-QFN (8 mm x 8 mm) 68-QFN (8 mm x 8 mm) 68-QFN (8 mm x 8 mm) 68-QFN (8 mm x 8 mm)
CPU Architecture 8-bit 8051 core 8-bit 8051 core 8-bit 8051 core 8-bit 8051 core 8-bit 8051 core 8-bit 8051 core
Programmable Architecture PSoC 3 PSoC 3 PSoC 3 PSoC 3 PSoC 3 PSoC 3

Ключевые отличия

  • Full 50 MHz operating class (против CY8C3445LTI-085)
  • Directly selectable 32 KB flash configuration (против CY8C3446LTI-095)
  • Same-family programming and configuration workflow (против CY8C3447LTI-095)
  • Exact 50 MHz and 68-QFN combination (против CY8C3446LTI-085)

Заметки по проектированию

Treat the 68-QFN footprint as a fine-pitch escape-design problem. Follow the manufacturer land-pattern dimensions and exposed-pad geometry rather than scaling a generic QFN library footprint. Route perimeter-pin escape paths on the top layer where practical, use uninterrupted ground planes on inner layers, and avoid placing test pads or tall components beside the fine-pitch leads. Thermal-via placement under the exposed pad should follow the recommended package layout.

Provide local decoupling from the device's supply pins to the ground plane, with each capacitor placed close to the pin it serves and connected through a short, low-inductance path. Confirm the required capacitance, voltage rating, and allowable ESR from the CY8C34xx electrical characteristics and application guidance. Review supply sequencing, maximum ramp rate, and brownout behavior for systems that coordinate multiple rails. Do not infer those limits from the device's 50 MHz CPU rating.

Separate sensitive analog inputs and external crystal or timing networks from high-speed digital switching paths. Use a continuous ground reference under the device and preserve return paths beneath signal traces. If the PSoC configuration routes programmable blocks to sensitive sensors, validate crosstalk and settling time on the assembled board. PCB signal-integrity performance depends on the final stack-up, trace geometry, external components, and grounding implementation rather than the ordering code alone.

A same-family MPN is not automatically a drop-in replacement. Before substituting CY8C3445LTI-095, compare the ordering suffix, CPU speed grade, flash and SRAM size, temperature range, supply limits, pin multiplexing, package drawing, exposed-pad connection, bootloader behavior, and PSoC configuration identifiers. Rebuild or update the firmware as required, and perform a hardware comparison across power, reset, programming, communications, and every used peripheral before production substitution.

Estimate junction temperature from the device dissipation, package thermal resistance, and actual board copper rather than relying on a nominal package rating. Estimated: P_dissipation = (V_in - V_out) x I_load + V_in x I_quiescent, using the intended worst-case input voltage and load current; T_j approximately equals T_ambient plus the resulting thermal rise. Confirm the specific power values and thermal model in the manufacturer documentation, and preserve exposed-pad copper when heat dissipation is significant.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The reviewed catalog and distributor information does not establish the exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code. Confirm these declarations with the manufacturer before a regulated production release.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

CY8C3445LTI-095 datasheet CY8C3445LTI-095 specifications CY8C3445LTI-095 pinout CY8C3445LTI-095 datasheet pdf Infineon CY8C3445LTI-095 CY8C3445LTI-095 replacement CY8C3445LTI-095 equivalent CY8C3445LTI-095 cross reference CY8C3445LTI-095 price CY8C3445LTI-095 stock CY8C3445LTI-095 32KB 50MHz CY8C3445LTI-095 68-QFN CY8C3445LTI-095 ISP programmer CY8C3445LTI-095 vs CY8C3446LTI-095 CY8C3445LTI-095 application circuit

Связанные компоненты & термины

Infineon Technologies CY8C3445LTI-095 CY8C3445LTI-085 CY8C3446LTI-095 CY8C3446LTI-085 CY8C3447LTI-095 CY8C3447LTI-085 PSoC PSoC 3 microcontroller 8-bit microcontroller 8051 core embedded flash programmable system-on-chip programmable digital block programmable analog block 68-QFN QFN package family surface-mount semiconductor system-on-chip ISP programming industrial control building automation instrumentation motor control
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ