CY8C3666AXA-036 - 67MHz 64KB Flash MCU | Infineon
Артикул: CY8C3666AXA-036 ✓ АктивенCY8C3666AXA-036 Обзор
A PSoC 3 microcontroller is a mixed-signal embedded controller in which configurable digital and analog blocks coexist with an embedded CPU. The 8051 core belongs to the broader microcontroller hierarchy, where flash memory, SRAM, timers, communication interfaces, and programmable peripherals are integrated on one semiconductor device. This architecture reduces the number of separate components required when a design needs both control logic and analog signal conditioning.
The principal device attributes include a 67 MHz maximum CPU frequency, 64 KB flash, 8 KB SRAM, an 8-bit architecture, and a 0.5 V to 5.5 V supply range. The 100-TQFP package provides 100 externally accessible or assigned connection positions in a relatively large surface-mount footprint. This package is appropriate for designs that need numerous I/O resources and easier visual inspection during assembly compared with a very fine-pitch ball-grid-array package.
PSoC 3 devices use configurable blocks to implement functions such as digital logic, timers, analog conversion, and analog amplification without relying on a separate microcontroller and several support ICs. Firmware configures these resources during startup, allowing a fixed hardware design to serve multiple control functions. This configurability is particularly useful for cost-sensitive embedded systems that need adaptable input conditioning, control logic, and communication behavior while keeping component count low.
Typical uses include industrial control modules, sensor-conditioning systems, building automation equipment, consumer interfaces, and compact embedded control platforms. The 8-bit processor is suitable for supervisory and event-driven control rather than computationally intensive workloads. The wide logic-level supply range also permits integration with compatible low-voltage digital peripherals when the board power architecture and individual peripheral limits are checked carefully.
PCB design should follow the manufacturer’s package drawing, pin table, and recommended decoupling configuration. Place the supply bypass capacitors close to the relevant power and ground pins, route high-current and sensitive analog connections away from switching nodes, and preserve the specified land pattern. Because this is a mixed-signal microcontroller, firmware configuration, unused-pin handling, grounding, and analog routing should be treated as one system-level design exercise rather than independent schematic and layout tasks.
This product page combines the verified device identity, memory and processor characteristics, package information, sourcing guidance, replacement constraints, and practical design considerations. It also distinguishes the target ordering code from confirmed alternatives by package, architecture, memory, voltage range, and CPU frequency, helping engineers narrow replacement decisions before schematic or PCB changes are considered.
Аналоги без доработки для CY8C3666AXA-036 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CY8C3666AXA-036 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Package, Product Type, SRAM.
CY8C3666AXI-036
✅ Прямая заменаУточнить цену
Открыть даташит →CY8C3666AXA-036 Максимальные параметры и электрические характеристики
| Product Type | PSoC 3 mixed-signal microcontroller |
| CPU Architecture | 8-bit 8051 |
| Maximum CPU Frequency | 67 MHz |
| Flash Memory | 64 KB (64K x 8 bits) |
| SRAM | 8 KB |
| Рабочее напряжение питания | 0.5 V to 5.5 V |
| Device Family | PSoC 3 CY8C36xx |
| Корпус | 100-TQFP (14 mm x 14 mm) |
| Lead Count | 100 leads |
| Тип монтажа | Surface mount |
| Programmable Resource Type | Configurable analog and digital blocks |
Руководство по цоколевке CY8C3666AXA-036 в корпусе 100-tqfp (14 mm x 14 mm)
Цоколевка для CY8C3666AXA-036 (корпус 100-tqfp (14 mm x 14 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для CY8C3666AXA-036.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CY8C3666AXA-036 подходит для 6 применениеs: Industrial Sensor Conditioning, Building Automation Control, Compact Consumer Interfaces, Automated Equipment Controller, Environmental Monitoring Node, Communication Interface Module.
Industrial Sensor Conditioning
The CY8C3666AXA-036 fits sensor-conditioning modules that combine an 8051 control engine with programmable analog and digital functions. Its 67 MHz processor provides timing headroom for sampling, filtering, state management, and communications, while 64 KB flash accommodates application firmware and configuration tables. The 8 KB SRAM supports working buffers and protocol stacks. Engineers can use the mixed-signal architecture to place signal conditioning close to the sensor and reduce discrete circuitry. Final suitability depends on the required ADC or DAC performance, sensor excitation, operating temperature, and qualification, which must be confirmed in the manufacturer ordering information.
Building Automation Control
The CY8C3666AXA-036 is suitable for distributed building-control nodes that supervise sensors, relays, and user interfaces. Its 8051 core and 67 MHz maximum frequency support event handling and multiple periodic control tasks, while 64 KB flash provides room for protocol and application code. Configurable digital blocks can implement timing and logic functions, and configurable analog resources can assist with low-level signal conditioning. The 0.5 V to 5.5 V operating range can simplify integration with compatible low-voltage peripherals. Before deployment, verify relay-drive isolation, power-supply behavior, temperature requirements, and communications interfaces against the complete system specification.
Compact Consumer Interfaces
The CY8C3666AXA-036 can serve as the controller in compact consumer interface products combining capacitive or resistive sensing, indicator control, and communication. Its 64 KB flash stores firmware, calibration values, and interface tables, while 8 KB SRAM handles active control state. The PSoC 3 programmable blocks can consolidate timer, logic, and analog functions that might otherwise occupy separate devices. The 100-lead TQFP package offers broad pin availability for panel connections and peripheral buses. Designers should confirm package dimensions, usable I/O mapping, power sequencing, and production test requirements before committing the board layout.
Automated Equipment Controller
The CY8C3666AXA-036 fits small automated equipment controllers that coordinate sensors, actuators, status indicators, and communications. Its 67 MHz 8051 processor can execute control loops and diagnostic logic, while the programmable PSoC resources can offload deterministic digital timing or analog tasks. With 64 KB flash and 8 KB SRAM, the device has useful capacity for embedded applications that do not require a higher-performance 32-bit core. Use the 100-TQFP footprint when sufficient routing access and inspection are preferable to a very dense package. Validate actuator voltage levels, environmental limits, safety requirements, and the exact ordering grade before production release.
Environmental Monitoring Node
The CY8C3666AXA-036 is appropriate for environmental monitoring nodes that combine sensor inputs, local filtering, data logging, and periodic communications. Its 64 KB flash can hold firmware and calibration constants, while 8 KB SRAM supports recent samples and packet processing. The mixed-signal PSoC 3 architecture allows designers to place input conditioning and digital logic in the same device. A 0.5 V to 5.5 V operating range provides flexibility for compatible low-voltage sensor interfaces, although each sensor’s supply and signal limits remain independent requirements. Confirm ADC resolution, input bandwidth, sleep behavior, operating temperature, and power budget before using the device in outdoor or battery-operated installations.
Communication Interface Module
The CY8C3666AXA-036 can act as the supervisory controller in a communication interface module where an 8051 core manages packet processing, status detection, and configurable peripheral logic. At up to 67 MHz, the processor provides more timing headroom than basic low-rate supervisory devices, while 64 KB flash and 8 KB SRAM support embedded protocol code and buffers. The 100-TQFP package exposes a large pin count for host interfaces, indicators, and configuration signals. Designers should select a suitable external transceiver, define logic levels, and validate protocol timing and bus loading. The MCU itself does not determine the communication standard or guarantee a particular baud rate without peripheral and firmware configuration.
Справочные инженерные данные для CY8C3666AXA-036 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CY8C3666AXI-036 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 100-TQFP (14 mm x 14 mm) | 100-TQFP (14 mm x 14 mm) |
| CPU Architecture | 8-bit 8051 | 8-bit 8051 |
| Maximum CPU Frequency | 67 MHz | 67 MHz |
| Flash Memory | 64 KB (64K x 8 bits) | 64 KB |
| SRAM | 8 KB | 8 KB |
| Device Family | PSoC 3 CY8C36xx | PSoC 3 CY8C36xx |
| Ordering Suffix | AXA-036 | AXI-036 |
Ключевые отличия
- Confirmed exact-order-code identity (против CY8C3666AXI-036)
- Full PSoC 3 mixed-signal integration (против CY8C3666AXI-036)
- Broad logic-level operating range (против CY8C3666AXI-036)
Заметки по проектированию
Use the manufacturer’s CY8C3666AXA-036 package drawing for the 100-TQFP land pattern and exposed-pad connection. Place bypass capacitors at the supply pins with short, low-loop-inductance traces, and connect the ground return directly to the nearest suitable plane. A generic 100-lead TQFP footprint may not include the same exposed-pad geometry or thermal and electrical land recommendations.
Treat analog and digital routing as one mixed-signal layout. Keep sensor inputs away from switching-power nodes and high-current return paths, use a continuous ground reference under the device, and route sensitive signals over uninterrupted planes. Review the PSoC 3 pin-mux and analog configuration before finalizing the PCB because peripheral assignments can alter which pins are available for sensitive analog functions.
Do not assume that matching the package and headline memory specifications guarantees a drop-in replacement. The AXA and AXI ordering suffixes can identify different temperature, qualification, or ordering configurations. Before releasing CY8C3666AXI-036 as a substitute for CY8C3666AXA-036, compare the complete ordering table, exposed-pad requirements, operating-temperature limits, qualification status, and every assigned pin.
Design the 0.5 V to 5.5 V operating range into the system power architecture rather than treating it as an automatic regulator choice. Check internal core and peripheral voltage requirements in the manufacturer documentation, use separate local decoupling for sensitive supply domains where recommended, and account for startup sequencing. This prevents an external 5 V rail from being applied to a peripheral or domain with a narrower limit.
Информация о соответствии
No definitive environmental, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified for the exact CY8C3666AXA-036 ordering code. Confirm these attributes with the manufacturer before qualification.