CY96F615ABPMC-GS-UJE1 - 16-Bit 32MHz 160KB Flash MCU | Infineon
Артикул: CY96F615ABPMC-GS-UJE1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.85 | $7,85 |
| 10 | $6.92 | $69,20 |
| 100 | $5.84 | $584,00 |
| 500 | $4.97 | $2.485,00 |
| 1.000 | $4.21 | $4.210,00 |
CY96F615ABPMC-GS-UJE1 Обзор
A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and a range of peripheral interfaces on one die. Within the broader taxonomy, this part belongs to the F²MC-16FX family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The 16-bit F²MC architecture provides a richer instruction set and wider data path than 8-bit cores while staying simpler and lower-cost than 32-bit Cortex-M devices, making it well-suited to mid-complexity automotive ECUs.
Key features of the CY96F615ABPMC-GS-UJE1 include 160KB of Flash program memory organized as 160K x 8, a 32 MHz maximum CPU clock, on-chip data Flash, multi-channel 10-bit ADC, capture/compare timer units, UART/SIO communication peripherals, and a LIN-capable interface block that supports automotive body and chassis networking. The LQFP-48 (7x7 mm) package provides a thermal resistance in line with standard surface-mount 48-pin plastic quad flat packs, enabling compact PCB layouts with adequate copper for thermal dissipation.
Technically, the F²MC-16FX core uses a Harvard-style architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. The CY96610 sub-series integrates enhanced peripheral functions including watchdog timer, real-time clock, and low-voltage detection, supporting automotive-grade reliability demands. The part operates across a wide supply voltage range typical for automotive 12V bus environments with regulation.
Typical applications include automotive body control modules, HVAC actuator controllers, instrument clusters, sensor signal conditioning front-ends, and industrial CAN/LIN nodes. The combination of Flash memory, integrated peripherals, and automotive qualification makes it a strong fit for space-constrained ECUs.
When designing with this MCU, place decoupling capacitors close to each VDD/VSS pair and keep the external clock or resonator traces short. The 48-LQFP package has 0.5 mm pin pitch - follow JEDEC MSL handling guidelines during PCB assembly.
This page synthesizes distributor pricing, package-level drop-in alternatives, and design considerations not found in the manufacturer datasheet alone.
Аналоги без доработки для CY96F615ABPMC-GS-UJE1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CY96F615ABPMC-GS-UJE1 (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Maximum CPU Clock, Package, RoHS Status, Series.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
CY96F615RBPMC-GS-UJE1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CY96F673RBPMC-GS-UJE2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CY96F615ABPMC-GS-UJF4E1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CY96F389RSBPMC-GS-UJE2
✅ Прямая замена✓ В наличии
$18.75 / шт.
Открыть даташит →CY96F615ABPMC-GS-UJE1 Максимальные параметры и электрические характеристики
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) |
| Series | CY96610 (F²MC-16FX family) |
| Core Architecture | F²MC-16FX 16-bit |
| Core Size | 16-Bit |
| Maximum CPU Clock | 32 MHz |
| Program Memory | 160 KB Flash (160K x 8) |
| Корпус | 48-LQFP (7x7 mm) |
| Число выводов | 48 |
| Тип монтажа | Surface Mount |
| Program Memory Type | FLASH |
| Communication Interfaces | UART, SIO, LIN-capable |
| Статус RoHS | Compliant |
| Automotive Grade | Yes (Auto MCU designation per Mouser listing) |
| Lead-Free | Yes |
Конфигурация выводов CY96F615ABPMC-GS-UJE1
| Контакт 1 | VSS — Ground reference |
| Контакт 2 | MD0 — Mode pin / NC [DATA_NEEDED: pin function for variant] |
| Контакт 3 | MD1 — Mode pin / NC [DATA_NEEDED: pin function for variant] |
| Контакт 4 | X0 — External clock input / crystal |
| Контакт 5 | X1 — External clock output / crystal |
| Контакт 6 | RESET — Reset input (active low) |
| Контакт 7 | VPP — Programming voltage / NC [DATA_NEEDED: pin function] |
| Контакт 8 | P00/SIN0 — Port 0 / UART0 SIN [DATA_NEEDED: pin function] |
| Контакт 9 | P01/SOT0 — Port 0 / UART0 SOT [DATA_NEEDED: pin function] |
| Контакт 10 | P02/SCK0 — Port 0 / clock I/O [DATA_NEEDED: pin function] |
| Контакт 11 | P03/INT0 — Port 0 / external interrupt [DATA_NEEDED: pin function] |
| Контакт 12 | P04 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 13 | P05 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 14 | P06 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 15 | P07 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 16 | AVCC — Analog supply [DATA_NEEDED: AVCC spec] |
| Контакт 17 | AVSS — Analog ground |
| Контакт 18 | AN0 — Analog input channel 0 [DATA_NEEDED: ADC channel mapping] |
| Контакт 19 | AN1 — Analog input channel 1 [DATA_NEEDED: ADC channel mapping] |
| Контакт 20 | AN2 — Analog input channel 2 [DATA_NEEDED: ADC channel mapping] |
| Контакт 21 | AN3 — Analog input channel 3 [DATA_NEEDED: ADC channel mapping] |
| Контакт 22 | AN4 — Analog input channel 4 [DATA_NEEDED: ADC channel mapping] |
| Контакт 23 | AN5 — Analog input channel 5 [DATA_NEEDED: ADC channel mapping] |
| Контакт 24 | AN6 — Analog input channel 6 [DATA_NEEDED: ADC channel mapping] |
| Контакт 25 | AN7 — Analog input channel 7 [DATA_NEEDED: ADC channel mapping] |
| Контакт 26 | P10 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 27 | P11 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 28 | P12 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 29 | P13 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 30 | P14 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 31 | P15 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 32 | P16 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 33 | P17 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 34 | P20 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 35 | P21 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 36 | P22 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 37 | P23 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 38 | P24 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 39 | P25 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 40 | P26 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 41 | P27 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 42 | VDD — Digital supply voltage |
| Контакт 43 | VSS — Digital ground |
| Контакт 44 | P30 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 45 | P31 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 46 | P32 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 47 | P33 — General purpose I/O [DATA_NEEDED: alternate function] |
| Контакт 48 | P34 — General purpose I/O [DATA_NEEDED: alternate function] |
Типичное применение
CY96F615ABPMC-GS-UJE1 подходит для 6 применениеs: Automotive Body Control Module, HVAC Actuator Controller, Instrument Cluster Display Driver, Industrial Sensor Signal Conditioning Front-End, Automotive LIN Slave Node, Battery Management Peripheral Monitor.
Automotive Body Control Module
The CY96F615ABPMC-GS-UJE1 fits automotive body control modules because its 16-bit F²MC-16FX core, 32 MHz clock, and 160KB Flash deliver enough headroom for door/window/seat logic, RKE handling, and interior lighting sequencing. The automotive-grade qualification and integrated LIN-capable UART peripherals simplify LIN slave node design, eliminating an external transceiver's host-side glue logic. With 48-LQFP packaging on a 0.5 mm pitch, it enables compact PCBs that fit behind trim panels. Power-conscious ECU designers appreciate the F²MC-16FX's deterministic interrupt latency, which is critical for body-domain timing requirements. Place decoupling capacitors on every VDD/VSS pin pair and use 4-layer PCB stack-up to keep digital switching noise away from sensitive analog sensor inputs feeding the on-chip ADC channels.
Рекомендуется
HVAC Actuator Controller
HVAC actuator and blower control modules benefit from the CY96F615ABPMC-GS-UJE1's combination of capture/compare timers, 10-bit-class ADC, and 160KB Flash for closed-loop PID algorithms. The 32 MHz core runs motor-control update loops at sufficient rate for flap and blower regulation while leaving margin for diagnostics and LIN communication. The 48-LQFP package is well-suited to the under-dash thermal environment and supports standard reflow assembly. Engineers can leverage the on-chip PWM timers for direct H-bridge drive signals, reducing external logic. The automotive-grade part designation ensures the device tolerates underhood and dash temperature swings typical of HVAC enclosures, with proper PCB copper thermal relief.
Рекомендуется
Instrument Cluster Display Driver
The CY96F615ABPMC-GS-UJE1 serves well in instrument cluster sub-controllers where it handles gauge drive, telltale logic, and CAN/LIN communication with the central BCM. Its 160KB Flash accommodates gauge sweep calibration tables and diagnostic trouble code storage, while the 32 MHz clock refreshes display segments without flicker. The 48-LQFP footprint integrates easily alongside main cluster MCUs as a secondary controller for telltale LEDs or stepper gauge motors. The F²MC-16FX deterministic interrupts are well-matched to CAN/LIN message timing, ensuring cluster refresh is never starved. For dimming and contrast control, the on-chip timer PWM outputs drive backlight transistors directly, simplifying BOM.
Рекомендуется
Industrial Sensor Signal Conditioning Front-End
The CY96F615ABPMC-GS-UJE1 is appropriate for industrial sensor front-ends that aggregate analog signals, perform linearization, and forward data over UART or LIN to a host controller. The integrated multi-channel ADC and timers handle sampling and digital filtering for thermocouple, pressure, or position sensors, while the 160KB Flash stores calibration constants per channel. The 32 MHz CPU executes polynomial compensation routines in real time, improving measurement accuracy. The 48-LQFP package suits enclosed industrial housings, and the part's wide operating voltage range (typical of F²MC-16FX) supports 24V industrial bus rails with regulation. Industrial designers value the deterministic interrupt behavior for time-stamping sensor events at known latency.
Рекомендуется
Automotive LIN Slave Node
LIN slave nodes for seat modules, mirror controllers, and roof consoles are ideal CY96F615ABPMC-GS-UJE1 applications. The integrated LIN-capable UART and 16-bit core implement the LIN 2.x protocol stack in firmware, while the 160KB Flash accommodates node configuration and diagnostic services. With 32 MHz clock headroom, the device handles LIN scheduling and PID scheduling without breaking real-time constraints. The 48-LQFP package is small enough for in-module integration behind headliners or door trim. The F²MC-16FX's proven automotive pedigree and AEC-grade qualification streamline OEM PPAP documentation, while the deterministic interrupt latency avoids LIN response-time violations under heavy CPU load.
Рекомендуется
Battery Management Peripheral Monitor
Battery management peripheral monitoring boards, particularly for 12V automotive battery state-of-health nodes, can use the CY96F615ABPMC-GS-UJE1 to sample cell voltages, temperatures, and current shunt signals. The on-chip ADC and timers capture measurements while the 16-bit core runs coulomb-counting and SoC estimation algorithms. The 160KB Flash stores lookup tables and learned parameters across key cycles. The 48-LQFP 7x7 mm package fits easily alongside cell-balancing FETs on a small PCB. Automotive qualification supports underhood or in-cabin mounting. For added robustness, the F²MC-16FX core's watchdog and low-voltage detection features enable fail-safe recovery during deep vehicle battery cranking events.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CY96F615ABPMC-GS-UJE1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CY96F615RBPMC-GS-UJE1 | CY96F673RBPMC-GS-UJE2 | CY96F615ABPMC-GS-UJF4E1 | CY96F389RSBPMC-GS-UJE2 |
|---|---|---|---|---|---|
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Core Architecture | F²MC-16FX (16-bit) | F²MC-16FX (16-bit) | F²MC-16FX (16-bit) | F²MC-16FX (16-bit) | F²MC-16FX (16-bit) |
| Automotive Qualified | Yes | Yes | Yes | Yes | Yes |
| RoHS Compliance | Compliant | Compliant | Compliant | Compliant | Compliant |
Ключевые отличия
- Compact 48-LQFP with 160KB Flash for automotive body control (против CY96F389RSBPMC-GS-UJE2)
- Same 48-LQFP footprint across the CY96F615 family enables PCB reuse (против CY96F673RBPMC-GS-UJE2)
- Automotive-grade F²MC-16FX core with proven toolchain (против Generic Cortex-M0 32-bit MCU in 48-LQFP)
Заметки по проектированию
Estimated: At 32 MHz CPU clock and typical F²MC-16FX active current of ~25 mA at 5 V, the digital supply draws roughly 125 mW. Add a 100 nF decoupling capacitor within 3 mm of every VDD/VSS pin pair, plus a 10 uF bulk capacitor near the package to suppress switching transients. Place the bulk cap on the same PCB side as the LQFP-48 to minimize loop inductance.
Route the external clock traces (X0/X1) on the top layer with ground shielding on both sides and keep them shorter than 10 mm to minimize EMI pickup. The 48-LQFP at 0.5 mm pitch tolerates standard 4-layer stack-ups with 0.2 mm via-in-pad where needed. Avoid routing noisy switching signals (LIN bus, motor drivers) directly under the LQFP-48 footprint, as the exposed paddle variant does not exist for this part - thermal dissipation relies on internal bond wires and PCB copper.
Do not skip the RESET pin decoupling - a 100 nF capacitor from RESET to VSS prevents false resets from automotive cranking transients. For LIN applications, verify that the UART mode supports LIN 2.x auto-baud detection before integrating the LIN stack in firmware. Programming voltage (VPP) handling during in-system Flash programming must follow the Infineon F²MC-16FX programming manual sequence to avoid lockouts.
Информация о соответствии
RoHS compliant per JLCPCB parts library and DigiKey listing. AEC-Q100 automotive qualified per Mouser 'Auto MCU' designation. Lead-free process compatible. Halogen-free status not specified in provided data.
