DLPC6540ZDC - 4K UHD DLP Display Controller for DLP471TP DMD | TI
Артикул: DLPC6540ZDC ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $115.64 | $115,64 |
| 10 | $104.07 | $1.040,70 |
| 100 | $92.51 | $9.251,00 |
| 500 | $80.95 | $40.475,00 |
| 1.000 | $75.62 | $75.620,00 |
DLPC6540ZDC Обзор
A DLP display controller is the digital signal-processing and sequencing hub of a TI DLP chipset. It receives video input data, performs image processing, formatting, and warp/geometric correction, then generates the high-speed digital bit-plane signals that toggle the millions of micromirrors on the DMD at the precise timing required to modulate light. As part of the broader DLP system hierarchy, the DLPC6540 sits between the host video source (SoC, FPGA, or graphics IC) and the opto-mechanical projection stage (DMD + LED/laser light source + optics), and it is one of several TI display controllers differentiated by their target DMD resolution and supported illumination schemes.
Key features of the DLPC6540 include support for 4K UHD (3840x2160) imaging on the DLP471TP DMD, programmable LED or laser illumination sequencing, integrated image-processing pipelines, and high-speed serial video inputs. The DLPC6540ZDC package variant provides the NFBGA-201 land pattern required for compact 4K projection engines, with a high-pin count to support the parallel DMD bus plus video input, illumination control, and host command interfaces.
Technically, the DLPC6540 implements deterministic DMD bit-plane scheduling and structured light patterns needed for solid-state illumination sources. The chipset architecture separates the controller's low-voltage digital logic domain from the high-current illumination driver domain (DLPA3005 PMIC), allowing system designers to optimize PCB layout, thermal dissipation, and EMI performance.
Typical applications include 4K UHD laser/LED projectors, AR/MR head-mounted displays, digital signage, industrial inspection systems, and small-form-factor high-resolution embedded projection systems. Designers building 4K UHD displays with small optical engines are the primary audience.
When designing with this device, follow the reference schematic and layout in the DLPC6540 firmware/software design documentation. The DLPC6540 typically requires matching DLP471TP DMD, DLPA3005 PMIC, and DLPC6540 firmware; PCB layout, controlled impedance routing for the DMD high-speed bus, and thermal management of the NFBGA-201 package all demand careful attention.
This page synthesizes distributor pricing and stock data, drop-in alternative candidates, and practical chipset design considerations not found in any single distributor listing.
Аналоги без доработки для DLPC6540ZDC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DLPC6540ZDC-N1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DLPC6540ZDC-1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DLPC6540ZDC Характеристики
| Product Type | DLP display controller |
| Target DMD | DLP471TP (0.47-inch 4K UHD) |
| Companion PMIC | DLPA3005 |
| Supported Resolution | 4K UHD (3840 x 2160) |
| Корпус | 201-NFBGA (13 x 13 mm) |
| Число выводов | 201 |
| Тип монтажа | Surface Mount |
| Illumination Source Support | LED / Laser (via DLPA3005) |
| Статус RoHS | Compliant (per distributor listings) |
| Lead-Free | Yes (per distributor listings) |
Руководство по цоколевке DLPC6540ZDC в корпусе 201-nfbga (13 x 13 mm)
Цоколевка для DLPC6540ZDC (корпус 201-nfbga (13 x 13 mm)). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для DLPC6540ZDC.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DLPC6540ZDC подходит для 6 применениеs: 4K UHD Laser Projector, AR/MR Head-Mounted Display, Digital Signage Display, Industrial Inspection & 3D Scanning, Medical Imaging Display, Pico/Mobile Projector.
4K UHD Laser Projector
The DLPC6540ZDC's 4K UHD bit-plane control for the DLP471TP DMD makes it the supported controller for compact 4K UHD laser projectors. According to the TI DLPC6540 product page, the chipset enables high-brightness, small-form-factor 4K projection needed for premium home cinema and venue projection. The DLPC6540 drives the DLP471TP micromirrors with deterministic bit-plane scheduling while the DLPA3005 PMIC sequences the red/green/blue laser diodes with sub-millisecond response. Engineers gain 4K UHD on a 0.47-inch DMD, enabling shorter throw ratios and lighter optical engines than camera-grade DMDs. The trade-off is careful laser speckle management and Class-1 laser safety interlock implementation.
Рекомендуется
AR/MR Head-Mounted Display
The DLPC6540ZDC chipset is a strong fit for AR/MR head-mounted displays (HMDs) that need 4K UHD micro-projection in a lightweight optical engine. The 0.47-inch DLP471TP DMD enables slim see-through HMD optical paths, while the DLPC6540 image-processing pipeline supports the geometric corrections and warp maps required for transparent waveguide combiners. The DLPC6540ZDC's low-power sequencing reduces HMD overheating and extends continuous-use runtime. Designers must perform pixel-level distortion calibration per the TI chipset design guide and ensure the DLPC6540 firmware version supports their chosen warp/distortion algorithm.
Рекомендуется
Digital Signage Display
The DLPC6540ZDC's 4K UHD resolution and high-brightness laser/LED illumination support make it suitable for premium digital signage in retail, transit, and outdoor applications. The DLPC6540 sequencing with DLPA3005 PMIC enables 24/7 operation with high brightness and consistent color over the laser lifetime. Signage content can be streamed over standard video interfaces into the DLPC6540, which then drives the DLP471TP DMD at full 4K UHD frame rate. Engineers should design adequate heatsinking for the laser modules and verify long-term laser speckle performance per TI's signage reference design notes.
Рекомендуется
Industrial Inspection & 3D Scanning
The DLPC6540ZDC chipset supports industrial inspection and 3D scanning applications where structured light patterns must be projected at high resolution and high speed. The DLPC6540's ability to drive structured-light bit sequences onto the DLP471TP DMD enables programmable light patterns for camera-based 3D inspection of manufactured parts. The 4K UHD pixel resolution increases the inspection field density per pattern, reducing scan time and improving defect detection rates. Engineers should verify the DLPC6540 firmware supports the required pattern rate for their line-scan timing; pattern-update rate limits depend on the firmware version.
Рекомендуется
Medical Imaging Display
The DLPC6540ZDC's 4K UHD resolution enables high-detail medical imaging displays used in surgical visualization, ophthalmic examination, and diagnostic imaging review. The DLPC6540 image-processing pipeline supports medical-grade color calibration and grayscale ramp accuracy required for diagnostic display performance. The DLP471TP DMD's high pixel density delivers the resolution needed for fine-detail pathology and radiology review. Designers targeting medical applications must validate IEC 60601-1 system-level compliance; the DLPC6540ZDC itself is not medical-grade certified at the IC level.
Рекомендуется
Pico/Mobile Projector
The DLPC6540ZDC chipset fits high-end pico/mobile projector designs where 4K UHD resolution is required in a battery-powered compact form factor. The DLPC6540 low-power sequencing plus the DLPA3005 PMIC's efficient LED/laser drivers optimize battery runtime while maintaining 4K UHD image quality. The 0.47-inch DLP471TP DMD enables the short-throw optical paths needed for pocket-sized projection. Designers must size the battery, thermal envelope, and optical engine together to balance brightness, runtime, and projector size; reference TI's mobile projection reference designs for typical budgets.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DLPC6540ZDC — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DLPC6540ZDC-N1 | DLPC6540ZDC-1 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 201-NFBGA (13x13 mm) | 201-NFBGA (13x13 mm) - same | 201-NFBGA (13x13 mm) - same |
| Target DMD | DLP471TP (0.47-inch 4K UHD) | DLP471TP (same family) | DLP471TP (same family) |
| Companion PMIC | DLPA3005 | DLPA3005 | DLPA3005 |
| Resolution Support | 4K UHD (3840x2160) | 4K UHD | 4K UHD |
| Pin Count | 201 | 201 | 201 |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount |
| Firmware Variant | DLPC6540 standard | DLPC6540-N1 variant | DLPC6540-1 variant |
Ключевые отличия
- Only controller supporting the DLP471TP 0.47-inch 4K UHD DMD (против Other TI DLP controllers (e.g. DLPC4430, DLPC900))
- Chipset-level integration with DLPA3005 PMIC (против Custom discrete PMIC solutions)
- 4K UHD in 0.47-inch DMD footprint (против Larger 0.65-inch DMDs)
Заметки по проектированию
The DLPC6540ZDC requires carefully controlled-impedance PCB routing on the parallel DMD high-speed bit-plane bus to maintain signal integrity at 4K UHD bit rates. Per the TI chipset design guide, route the DMD bus with matched lengths, ground-referenced shielding, and minimum via stubs; place the DLP471TP DMD within the maximum trace length specified in the datasheet. The 201-NFBGA package requires microvia or laser-drilled via fanout and a 4-6 layer stack-up with continuous ground planes below the BGA.
Use the DLPA3005 PMIC in the chipset reference topology for all DLPC6540ZDC supply rails. Do not substitute a generic PMIC; the DLPC6540 firmware handshakes with the DLPA3005 via the chipset-specific serial control interface for LED/laser sequencing and DMD high-voltage generation. Per the TI chipset design rules, all power-up and power-down sequencing is firmware-managed; do not use external sequencers that bypass DLPA3005 control. Estimate LED/laser driver efficiency at 85-92% per DLPA3005 datasheet to compute heatsink requirements.
Estimated: the DLPC6540ZDC chipset must use matched firmware version, DLP471TP DMD, and DLPA3005 PMIC. Using a non-TI PMIC, a non-DLP471TP DMD, or mismatched firmware versions typically results in DMD bit-plane timing violations, illumination sequencing failures, and irreversible DMD damage. Validate all three chipset components and firmware revision together before prototype bring-up. Confirm DLPC6540 firmware version supports your target illumination source rate and warp-table size.
Информация о соответствии
RoHS compliant and lead-free per DigiKey/Mouser catalog data. Other compliance statements (REACH, halogen-free, conflict minerals) should be verified from TI environmental compliance letter on the TI DLPC6540 product page.
