DS90CF364MTD - 65 MHz 18-Bit LVDS Receiver | Texas Instruments
Артикул: DS90CF364MTD ✓ АктивенDS90CF364MTD Обзор
An LVDS receiver is an interface-circuit component that restores low-voltage differential signaling into digital logic levels. In the broader hierarchy, it belongs to the LVDS interface family, then to serializers, deserializers, and interface ICs used in display and communications systems. LVDS transmits complementary signals over a balanced pair, allowing reliable data transfer across cables or PCB interconnects while limiting common-mode noise and radiated emissions.
The DS90CF364MTD supports an 18-bit RGB data path with LCD timing and control signals, including FPLINE, FPFRAME, and DRDY. At a 65 MHz transmit-clock frequency, the link carries 455 Mbps per LVDS data channel according to the manufacturer product information. The receiver is intended to pair with the DS90C363 transmitter family, whose programmable rising- or falling-edge strobe operation allows interoperability with the falling-edge receiver.
The device operates from a 3.3 V supply and is packaged in a surface-mount 48-TSSOP package. Its receiver architecture is designed for point-to-point display links, where the transmitter, receiver, cable, and connector form a controlled differential channel. The package and interface arrangement support compact display-controller boards while keeping the high-speed differential traces physically separate from sensitive analog and control circuitry.
Typical applications include LCD and flat-panel monitor interfaces, digital signage, industrial HMIs, automotive display links, test equipment, and embedded video systems. In each case, the DS90CF364MTD can reduce parallel bus width and connector pin count while preserving an 18-bit display data path. System designers should still validate signal integrity, connector geometry, cable length, and grounding against the specific display and transmitter implementation.
A primary design consideration is that LVDS performance depends on the complete channel, not only the receiver IC. Use controlled-impedance PCB routing, a suitable differential pair geometry, compliant input-capacitance loading, and the power and ground connections specified by the manufacturer datasheet. Keep the receiver away from noisy switching nodes and place bypassing close to the device supply pins.
This product page combines the manufacturer interface description, package information, application guidance, and practical considerations for engineers evaluating the DS90CF364MTD in a flat-panel display link. The information helps distinguish receiver function, channel rate, voltage, package, and system-level design responsibilities before a prototype PCB is released.
Аналоги без доработки для DS90CF364MTD — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
DS90CF364MTD/NOPB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CF364MTDX
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CF364AMTD
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CF364AMTDX/NOPB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CR285MTD
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CF364MTD Характеристики
| Product Type | 18-bit LVDS flat-panel display receiver |
| Напряжение питания | 3.3 V nominal |
| Transmit Clock Frequency | 65 MHz maximum |
| LVDS Data Rate | 455 Mbps per LVDS data channel |
| Input Signal Type | 3 differential LVDS data streams |
| Output Signal Type | CMOS/TTL |
| Display Data Width | 18 bits |
| LVDS Channel Count | 3 channels |
| Recovered Control Signals | FPLINE, FPFRAME, and DRDY |
| Compatible Transmitter Family | DS90C363 |
| Receiver Strobe Edge | Falling edge |
| Корпус | 48-TSSOP, 6.10 mm width |
| Тип монтажа | Surface mount |
| Product Description | +3.3 V LVDS receiver for an 18-bit flat-panel display link |
Руководство по цоколевке DS90CF364MTD в корпусе 48-tssop, 6.10 mm width
Цоколевка для DS90CF364MTD (корпус 48-tssop, 6.10 mm width). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для DS90CF364MTD.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DS90CF364MTD подходит для 6 применениеs: LCD Monitor Interface, Industrial Human-Machine Interface, Digital Signage Controller, Automotive Display Link, Embedded Video Test Equipment, Medical Panel Interface.
LCD Monitor Interface
The DS90CF364MTD fits an LCD monitor link that carries 18-bit RGB pixel data plus FPLINE, FPFRAME, and DRDY timing information over three LVDS channels. At the stated 65 MHz transmit-clock rate, each channel operates at 455 Mbps, reducing the number of parallel conductors and connector pins compared with a wide TTL display bus. The receiver converts the three differential streams back into CMOS/TTL signals for the display controller. Validate the complete transmitter-to-panel channel with controlled-impedance routing and the display timing requirements before production.
Рекомендуется
Industrial Human-Machine Interface
An industrial HMI can use the DS90CF364MTD to move an 18-bit display link from a parallel bus to three differential LVDS channels. The 3.3 V receiver architecture is appropriate for compact embedded display electronics, while recovered FPLINE, FPFRAME, and DRDY outputs provide the panel-control information required alongside pixel data. Because industrial equipment may impose stricter environmental expectations, confirm the operating-temperature limit and qualification of the exact ordering code. Keep the high-speed LVDS pair geometry and ground return within the transmitter and panel-implementation requirements.
Рекомендуется
Digital Signage Controller
Digital signage controllers benefit from the DS90CF364MTD when a large panel connection would otherwise require many parallel data and control conductors. Three LVDS channels carry the 18-bit display information at the specified 455 Mbps per channel, supporting a compact external cable and reducing sensitivity to common-mode EMI. The receiver restores CMOS/TTL data and timing signals for downstream panel electronics. Cable length, connector impedance, and grounding remain system-level constraints, so prototype testing should include worst-case resolution, refresh-rate, and power-supply conditions.
Рекомендуется
Automotive Display Link
The DS90CF364MTD can serve as the receiving element of a 3.3 V, 65 MHz LVDS display link in an automotive infotainment or cluster design. Differential signaling reduces the cable size and connector burden associated with parallel RGB data, which is useful where display routing space is constrained. The recovered timing and control outputs support the corresponding panel interface. Automotive production use should require confirmation of AEC-Q100 status, temperature range, qualification, and lifecycle for the exact suffix before the receiver is released for vehicle applications.
Рекомендуется
Embedded Video Test Equipment
The DS90CF364MTD is useful in test equipment that must reproduce or analyze an 18-bit flat-panel display link. Its three-channel LVDS receiver provides a way to bring serialized panel data and FPLINE, FPFRAME, and DRDY signals into CMOS/TTL logic for measurement or stimulus control. The 65 MHz operating point supports practical characterization of source-to-panel interfaces under realistic data activity. Use short, controlled test paths and stable reference terminations when correlating receiver outputs with transmitter waveforms, and account for input tolerance and output timing from the manufacturer datasheet.
Рекомендуется
Medical Panel Interface
A medical display system can use the DS90CF364MTD to reduce the physical width of an 18-bit panel connection while retaining separate pixel-data and timing-control channels. The three differential LVDS inputs support a structured transmitter-to-receiver link up to the stated 65 MHz clock rate, and the receiver outputs CMOS/TTL signals compatible with conventional digital logic. Medical designs still require system-level validation for electrical safety, isolation, EMC, and display integrity. Confirm the exact device qualification and operating limits rather than inferring them from the panel application alone.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DS90CF364MTD — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DS90CF364MTD/NOPB | DS90CF364MTDX | DS90CF364AMTD | DS90CF364AMTDX/NOPB | DS90CR285MTD |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TSSOP | 48-TSSOP - same | 48-TSSOP - same | 48-TSSOP - same | 48-TSSOP - same | 48-TSSOP - same |
| Supply Voltage | 3.3 V nominal | 3.3 V nominal | 3.3 V nominal | 3.3 V nominal | 3.3 V nominal | 3 V to 3.6 V |
Ключевые отличия
- Purpose-built 18-bit panel timing architecture (против DS90CR285MTD)
- Exact lead-free ordering form in the same footprint (против DS90CF364MTD/NOPB)
- Compatible transmitter-family interoperability (против DS90CF364AMTD)
Заметки по проектированию
Route each LVDS differential pair as a controlled-impedance structure with closely matched trace geometry, uninterrupted reference planes, and minimal stubs. Keep the three differential channels physically separated from clocks, switching regulators, and other high-current paths. Use the transmitter, receiver, connector, and PCB geometry specified by the system reference design because connector transitions and cable impedance strongly affect the 455 Mbps-per-channel interface.
Do not substitute a generic LVDS receiver solely because it accepts differential data. The DS90CF364MTD interface is organized around an 18-bit flat-panel link, three LVDS channels, recovered FPLINE, FPFRAME, and DRDY signals, and compatibility with the DS90C363 transmitter family. Confirm signal mapping, output timing, supply limits, and strobe-edge behavior against the exact pin configuration before approving a substitute.
Place power-supply bypass capacitors close to the device's supply and ground pins and provide a low-impedance return path for each differential pair. Avoid placing test pads or jumper vias in the high-speed net unless their effect has been evaluated. Maintain a quiet analog and logic partitioning strategy, while also observing the short return paths and ground references required by the display interface specification.
Balance the LVDS cable and connector treatment with the enclosure and ground architecture of the display system. Differential signaling can reduce radiated emissions and improve noise immunity, but improperly terminated or unbalanced cables can still create common-mode currents. Validate emissions and immunity with the final cable, connector, panel load, power-supply layout, and enclosure rather than testing only the receiver board.
Информация о соответствии
The /NOPB order code is associated with a lead-free ordering form, but separate compliance declarations for RoHS, REACH, halogen content, conflict minerals, and AEC-Q100 must be confirmed for the exact orderable part.
