DS90CR561MTDX - 18-Bit LVDS FPD Transmitter | Texas Instruments
Артикул: DS90CR561MTDX ✗ Снят с производстваDS90CR561MTDX Обзор
An LVDS flat-panel-display interface is a high-speed differential link used to connect digital video source logic to panel timing controllers and display drivers. In this hierarchy, an LVDS transmitter serializes parallel CMOS/TTL data into differential outputs, while the receiving electronics recover the data at the display end. Differential signaling helps limit common-mode noise pickup, making the approach suitable for compact systems containing parallel pixel data and clock information.
The DS90CR561MTDX accepts 21 bits of CMOS/TTL input and organizes that information into three LVDS streams. This format corresponds to an 18-bit color display link, with additional data carrying display-related information. The transmitter therefore acts as the source-side interface between a parallel display engine and an LVDS-based panel connection, reducing the number of conductors required relative to a parallel-only implementation.
The DS90CR561 and DS90CR562 family is identified in the manufacturer documentation as an 18-bit color flat-panel-display link. The DS90CR561MTDX is supplied in the 48-pin TSSOP package, identified in distributor records as PDSO48 with gull-wing terminals and surface mounting. Package-level details, pin assignments and electrical limits should be confirmed against the DS90CR561 manufacturer datasheet before a new PCB is released.
Typical uses include flat-panel monitors, industrial panel displays, and embedded display systems that generate parallel RGB pixel data and require an LVDS interface to a remote controller. The 21-bit parallel input and three serialized LVDS outputs make the device particularly relevant to display architectures where cable count, signal integrity and panel interoperability must be considered together.
PCB design should preserve the differential signal geometry specified by the DS90CR561 family documentation. LVDS pairs should be routed as controlled-impedance, tightly coupled traces, with the transmitter and connector positioned to minimize interruption of the differential path. The data sheet pin-description table is the authoritative source for assigning the 48 TSSOP terminals and grounding functions.
This product page combines the DS90CR561MTDX identity, package information, LVDS interface description, sourcing guidance and verified drop-in candidates with practical selection and layout considerations. It also distinguishes mechanically similar ordering codes from confirmed functional equivalents, helping engineers evaluate replacements without assuming that an identical package alone guarantees electrical and timing compatibility.
Аналоги без доработки для DS90CR561MTDX — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DS90CR561MTDX (тот же форм-фактор и посадочное место) — отличается по Input Data Width, Package, Product Type.
DS90CR561MTD
✅ Прямая заменаУточнить цену
Открыть даташит →DS90CR561MTD/NOPB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CR561MTDX/NOPB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DS90CR561MTDX Характеристики
| Product Type | LVDS 18-bit color flat-panel-display link transmitter |
| Manufacturer | Texas Instruments |
| Former Brand | National Semiconductor |
| Input Data Width | 21 bits of CMOS/TTL data |
| Color Data Width | 18 bits |
| Output Signal | 3 LVDS data streams |
| Output Driver Count | 4 drivers |
| Logic Family | CMOS/TTL input and LVDS output |
| Корпус | 48-pin TSSOP (PDSO48) |
| Terminal Count | 48 terminals |
| Terminal Form | Gull wing |
| Тип монтажа | Surface mount |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
Руководство по цоколевке DS90CR561MTDX в корпусе rectangular
Цоколевка для DS90CR561MTDX (корпус rectangular). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для DS90CR561MTDX.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DS90CR561MTDX подходит для 6 применениеs: Desktop Flat-Panel Monitor, Industrial Panel Display, Embedded Human-Machine Interface, Digital Video Controller Interface, Medical Panel Interface, Video Test Equipment.
Desktop Flat-Panel Monitor
The DS90CR561MTDX fits a parallel display pipeline in which a graphics controller presents 21 bits of CMOS/TTL information and the monitor requires three LVDS streams. Using the transmitter as the interface boundary reduces parallel routing beyond the source device and supports a compact differential connection to the panel timing controller. The 48-pin TSSOP package also permits reuse of an established 48-TSSOP display-controller layout. Before release, verify that the panel accepts the same bit mapping, clock arrangement, data rate and connector pinout. Cable length, refresh rate and display timing must remain within the limits specified by the DS90CR561 family documentation.
Рекомендуется
Industrial Panel Display
For an industrial display controller with a parallel CMOS/TTL output, the DS90CR561MTDX provides a defined path to an LVDS panel interface through three differential data streams. The transmitter is appropriate when the system benefits from reduced interconnect width, improved noise immunity over longer panel cables and a standardized source-side serializer. Because industrial systems may impose different temperature, qualification and lifecycle requirements, confirm those points in the manufacturer datasheet and ordering information. The design must also preserve each LVDS pair as a controlled-impedance differential route between the IC and display connector.
Рекомендуется
Embedded Human-Machine Interface
The DS90CR561MTDX can bridge a parallel graphics engine to an LVDS display in an embedded human-machine interface. Its 21-bit CMOS/TTL input and three LVDS outputs are suited to systems that generate pixel data locally but rely on a remote display controller or display panel. The TSSOP-48 footprint supports board-level integration where component height and assembly density are important. Integration requires exact agreement with the display's accepted bit map and synchronization signals. Review the pin-description table, recommended input-output connections and interface timing from the manufacturer DS90CR561 documentation before schematic capture.
Рекомендуется
Digital Video Controller Interface
A digital video controller that exposes parallel CMOS/TTL pixel data can use the DS90CR561MTDX as the source-side serializer for an 18-bit color flat-panel-display link. Converting the source data into three LVDS streams supports a cleaner cable interface than a long parallel bus and makes the DS90CR561 particularly relevant to compact display subsystems. The transmitter does not negotiate panel timing, so the host controller must still generate the expected pixel clock, blanking and data enable signals. Confirm output mapping and permissible operating conditions directly from the DS90CR561 family documentation.
Рекомендуется
Medical Panel Interface
The DS90CR561MTDX can serve as the LVDS output stage in a medical panel system when its electrical, timing and qualification requirements match the intended display. Differential LVDS transmission is useful in equipment containing motors, touch controllers and isolated power domains because it reduces susceptibility to common-mode interference compared with a long parallel bus. The transmitter still requires the panel vendor's exact supported bit layout, synchronization scheme and cable recommendations. Medical designs should also determine whether an automotive qualification is irrelevant and whether medical-device quality or regulatory requirements demand a specific lifecycle commitment.
Рекомендуется
Video Test Equipment
The DS90CR561MTDX can serve as a controlled display-link transmitter in video test equipment that needs to exercise an LVDS display interface. By accepting 21 parallel CMOS/TTL bits and presenting three LVDS streams, it allows an instrument to emulate the source side of an 18-bit color panel connection. This arrangement is useful for panel-controller characterization, timing verification and interface troubleshooting. The test fixture must provide the device's required supply, clock and data signals and must account for the output timing and loading limits listed in the manufacturer datasheet.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DS90CR561MTDX — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DS90CR561MTD | DS90CR561MTD/NOPB | DS90CR561MTDX/NOPB |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TSSOP (PDSO48) | 48-TSSOP (PDSO48) - same package | 48-TSSOP (PDSO48) - same package | 48-TSSOP (PDSO48) - same package |
| Function | LVDS 18-bit color flat-panel-display link transmitter | LVDS 18-bit color flat-panel-display link transmitter | LVDS color flat-panel-display link transmitter | LVDS color flat-panel-display link transmitter |
| Input Interface | 21-bit CMOS/TTL parallel input | 21-bit CMOS/TTL parallel input | 21-bit CMOS/TTL parallel input | 21-bit CMOS/TTL parallel input |
| LVDS Output Streams | 3 streams | 3 streams | 3 streams | 3 streams |
| Color Data Width | 18 bits | 18 bits | 18 bits | 18 bits |
| Terminal Count | 48 terminals | 48 terminals | 48 terminals | 48 terminals |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
Ключевые отличия
- Direct source-side conversion for an 18-bit color display link (против DS90CR561MTD)
- Exact DS90CR561MTDX ordering configuration (против DS90CR561MTDX/NOPB)
- Same mechanical footprint as documented family ordering codes (против DS90CR561MTD/NOPB)
Заметки по проектированию
Route each LVDS output as a controlled-impedance differential pair from the DS90CR561MTDX to the display connector or receiver. Keep the traces closely coupled, matched in length within the device's interface requirements, and free of stubs or test-probe discontinuities where practical. Reference the manufacturer recommended layout in the DS90CR561 datasheet rather than treating the LVDS outputs as ordinary single-ended routes.
Confirm the source clock, data mapping and synchronization signals against the receiving panel controller before layout release. The transmitter converts 21 CMOS/TTL input bits into three LVDS streams for an 18-bit color display link, so a wrong pin assignment or bit order can appear as scrambled color, unstable sync or loss of synchronization even when the differential outputs are properly routed.
Do not select a replacement solely because it fits a 48-TSSOP footprint. DS90CR561MTD, DS90CR561MTD/NOPB and DS90CR561MTDX/NOPB are documented ordering variants of the same interface family, but suffix processing, lifecycle status and exact orderable configuration must be confirmed. Compare the manufacturer pin table, electrical characteristics, temperature grade and qualification requirements before approving any change.
Информация о соответствии
The /NOPB ordering designations identify related lead-free processing variants, but no explicit RoHS, REACH, halogen-free, conflict-minerals or AEC-Q100 declaration was available for the exact target. These statuses must be confirmed for the selected ordering code before production release.