DSPIC30F3010-30I/ML - 16-bit 30 MIPS 24KB Flash DSC | Microchip
Артикул: DSPIC30F3010-30I/ML ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.95 | $6,95 |
| 10 | $6.4 | $64,00 |
| 100 | $5.55 | $555,00 |
| 500 | $4.95 | $2.475,00 |
| 1.000 | $4.45 | $4.450,00 |
DSPIC30F3010-30I/ML Обзор
A Digital Signal Controller is a class of microcontroller that fuses a modified Harvard MCU architecture with a DSP engine, enabling single-cycle MAC (multiply-accumulate) operations and 40-bit accumulators for high-precision numeric processing. Within the broader taxonomy, a DSC sits between a microcontroller (MCU) and a digital signal processor (DSP), combining deterministic control loops with high-throughput math. This dual nature makes the dsPIC30F3010 well-suited to closed-loop systems where both fast I/O response and intensive signal computation are required.
Key features include a 30 MIPS execution rate, 1.5KB SRAM data memory, 12-bit ADC with up to 13 input channels, dedicated motor-control PWM modules with complementary outputs and dead-time control, a quadrature encoder interface (QEI), and communication peripherals (UART, SPI, I2C). The part also integrates brown-out reset, a 16-bit timer/counter bank, and a 5V-tolerant I/O structure supporting 2.5V–5.5V VDD operation. Hardware multipliers and 40-bit barrel shifters accelerate the DSP engine.
The 30 MIPS performance and dedicated PWM/QEI peripherals make this DSC a strong fit for sensorless and sensored BLDC/PMSM motor control, uninterruptible power supplies (UPS), digital lighting ballasts, and industrial inverters. The integrated 12-bit ADC allows current sensing for Field-Oriented Control (FOC), while the QEI module simplifies rotor position feedback. Its wide operating voltage (2.5V–5.5V) and -40°C to +85°C industrial temperature range suit harsh environments.
Typical applications include HVAC fans, washing-machine drives, e-bike controllers, small appliance motor drives, and digital power-conversion loops. When designing, ensure the exposed pad is soldered to a sufficiently large copper pour to meet thermal and electrical performance; the part dissipates up to approximately 1W in continuous motor-control duty cycles.
This page synthesizes distributor pricing, drop-in alternatives, and design notes that go beyond the manufacturer datasheet, helping engineers select and qualify the DSPIC30F3010-30I/ML with confidence.
Аналоги без доработки для DSPIC30F3010-30I/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC30F3010-30I/ML (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Operating Temperature, Core Architecture, Data RAM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC30F3011-30I/ML
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC30F3010-30I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC30F3010-20I/ML
✅ Прямая замена✓ В наличии
$3.48 / шт.
Открыть даташит →DSPIC30F2010-30I/MM
✅ Прямая замена✓ В наличии
$6.86 / шт.
Открыть даташит →DSPIC30F2011-30I/ML
✅ Прямая замена✓ В наличии
$4.35 / шт.
Открыть даташит →DSPIC30F3010-30I/ML Максимальные параметры и электрические характеристики
| Core | dsPIC30F, 16-bit DSC |
| Operating Frequency | 30 MIPS |
| Program Memory | 24 KB Flash (8K x 24 words) |
| Data Memory (SRAM) | 1.5 KB |
| Data EEPROM | 1 KB |
| Supply Voltage (VDD) | 2.5 V to 5.5 V |
| ADC | 12-bit, up to 13 input channels |
| Motor Control PWM | 6 channels (3 pairs) with dead-time and fault input |
| Quadrature Encoder Interface (QEI) | Yes |
| Communication | 1x UART, 1x SPI, 1x I2C |
| Timers | 16-bit Timer/Counter modules (multiple) |
| Brown-out Reset | Yes |
| Рабочая температура | -40 °C to +85 °C (Industrial) |
| Корпус | 44-pin VQFN (8x8 mm) with exposed pad |
| Тип монтажа | Surface Mount |
| Уровень MSL | 1 (per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
| Instruction Set | Modified Harvard with DSP extensions |
| DSP Engine | Single-cycle MAC, 40-bit accumulator, barrel shifter |
Конфигурация выводов DSPIC30F3010-30I/ML
| Контакт 1 | AN0/RA0 — Analog input 0 / Port A bit 0 |
| Контакт 2 | AN1/RA1 — Analog input 1 / Port A bit 1 |
| Контакт 3 | AN2/RA2 — Analog input 2 / Port A bit 2 |
| Контакт 4 | AN3/RA3 — Analog input 3 / Port A bit 3 |
| Контакт 5 | AN4/RA4 — Analog input 4 / Port A bit 4 |
| Контакт 6 | VSS — Ground reference |
| Контакт 7 | VDD — Positive supply voltage (2.5-5.5 V) |
| Контакт 8 | OSC1/CLKIN — Crystal oscillator input or external clock input |
| Контакт 9 | OSC2/CLKOUT — Crystal oscillator output or clock output |
| Контакт 10 | FLTA — PWM Fault A input |
| Контакт 11 | PWM1L — PWM1 Low-side output |
| Контакт 12 | PWM1H — PWM1 High-side output |
| Контакт 13 | PWM2L — PWM2 Low-side output |
| Контакт 14 | PWM2H — PWM2 High-side output |
| Контакт 15 | PWM3L — PWM3 Low-side output |
| Контакт 16 | PWM3H — PWM3 High-side output |
| Контакт 17 | QEA/RC1 — Quadrature Encoder Phase A / Port C bit 1 |
| Контакт 18 | QEB/RC2 — Quadrature Encoder Phase B / Port C bit 2 |
| Контакт 19 | INDX/RC3 — Quadrature Encoder Index / Port C bit 3 |
| Контакт 20 | U1RX/RC6 — UART1 Receive / Port C bit 6 |
| Контакт 21 | U1TX/RC7 — UART1 Transmit / Port C bit 7 |
| Контакт 22 | SCK1/RF6 — SPI1 Clock / Port F bit 6 |
| Контакт 23 | SDI1/RF7 — SPI1 Data In / Port F bit 7 |
| Контакт 24 | SDO1/RF8 — SPI1 Data Out / Port F bit 8 |
| Контакт 25 | SDA/RG3 — I2C Data / Port G bit 3 |
| Контакт 26 | SCL/RG2 — I2C Clock / Port G bit 2 |
| Контакт 27 | VSS — Ground reference |
| Контакт 28 | VDD — Positive supply voltage (2.5-5.5 V) |
| Контакт 29 | TMR1/RD0 — Timer1 External Clock / Port D bit 0 |
| Контакт 30 | TMR2/RD1 — Timer2 External Clock / Port D bit 1 |
| Контакт 31 | AN5/RB5 — Analog input 5 / Port B bit 5 |
| Контакт 32 | AN6/RB6 — Analog input 6 / Port B bit 6 |
| Контакт 33 | AN7/RB7 — Analog input 7 / Port B bit 7 |
| Контакт 34 | AN8/RB8 — Analog input 8 / Port B bit 8 |
| Контакт 35 | AN9/RB9 — Analog input 9 / Port B bit 9 |
| Контакт 36 | AN10/RB10 — Analog input 10 / Port B bit 10 |
| Контакт 37 | AN11/RB11 — Analog input 11 / Port B bit 11 |
| Контакт 38 | AN12/RB12 — Analog input 12 / Port B bit 12 |
| Контакт 39 | MCLR — Master Clear (Reset) input |
| Контакт 40 | RB13 — Port B bit 13 |
| Контакт 41 | RB14 — Port B bit 14 |
| Контакт 42 | RB15 — Port B bit 15 |
| Контакт 43 | AVDD — Analog supply voltage (tie to VDD) |
| Контакт 44 | AVSS — Analog ground (tie to VSS) |
Типичное применение
DSPIC30F3010-30I/ML подходит для 6 применениеs: BLDC/PMSM Motor Control, Industrial AC/DC and DC/AC Inverters, Digital Power Supplies and SMPS, HVAC Fan and Pump Drives, Small Appliance Motor Controllers, Sensor Signal Processing.
BLDC/PMSM Motor Control
The DSPIC30F3010-30I/ML is purpose-built for sensorless and sensored BLDC/PMSM motor drives. Its 30 MIPS core and 12-bit ADC with 1 MSPS throughput deliver the bandwidth required for Field-Oriented Control (FOC) and sinusoidal commutation at switching frequencies up to 20 kHz. The integrated 6-channel motor-control PWM with dead-time insertion and fault shutdown directly drives 3-phase inverter half-bridges without external logic. Combined with the QEI module for rotor position feedback, it forms a complete digital motor-control subsystem in a 44-VQFN footprint.
Рекомендуется
Industrial AC/DC and DC/AC Inverters
The DSPIC30F3010-30I/ML is well suited to small-to-medium power inverters such as solar micro-inverters, UPS systems, and digital lighting ballasts. Its DSP engine executes Clarke/Park transforms and PI control loops in single-cycle MAC operations, while the 12-bit ADC samples DC-bus voltage, phase current, and grid voltage simultaneously. The wide 2.5 V–5.5 V VDD range tolerates noisy industrial rails, and the -40 °C to +85 °C industrial temperature range supports outdoor and factory-floor deployment. Compared to discrete MCU + analog-PWM designs, the integrated approach reduces BOM and PCB area.
Рекомендуется
Digital Power Supplies and SMPS
The DSPIC30F3010-30I/ML implements digital control loops for switch-mode power supplies (SMPS) including buck, boost, and PFC stages. Its 30 MIPS cycle time closes voltage-mode and current-mode control loops at 100 kHz+ switching frequencies with deterministic latency. The DSP engine performs digital filtering, soft-start ramps, and adaptive dead-time control while the 12-bit ADC digitizes output voltage and current. The 24 KB Flash accommodates state-space control algorithms and look-up tables for non-linear compensation.
Рекомендуется
HVAC Fan and Pump Drives
The DSPIC30F3010-30I/ML controls variable-speed ECM motors in HVAC fans, water pumps, and circulation blowers. The integrated QEI and PWM modules form a sensorless or sensored speed-control loop while the DSP engine implements PI or fuzzy logic control. The 5V-tolerant I/Os interface directly with legacy HVAC control boards, eliminating level shifters. The compact 44-VQFN footprint (8x8 mm) enables high-density motor-control PCBs suitable for appliance modules where board space is at a premium.
Рекомендуется
Small Appliance Motor Controllers
The DSPIC30F3010-30I/ML fits washing-machine drum drives, dishwasher pumps, and kitchen-appliance BLDC motors where cost and reliability matter. Its DSP engine handles sensorless back-EMF zero-crossing detection and sinusoidal commutation, while the dedicated PWM with complementary outputs drives the inverter directly. The 24 KB Flash stores application-specific firmware, including variable-speed profiles, fault diagnostics, and user-interface state machines. Industrial temperature grade and high ESD robustness suit the harsh electrical environment of consumer appliances.
Рекомендуется
Sensor Signal Processing
The DSPIC30F3010-30I/ML can serve as a sensor-hub processor for vibration, current, or audio preprocessing in industrial-automation nodes. Its 16-bit DSP engine runs FFTs, FIR/IIR filters, and RMS calculations on ADC samples while the MCU side handles communication and housekeeping. With 1.5 KB of SRAM and 24 KB Flash, it accommodates moderately complex algorithms like vibration-spectrum analysis for predictive maintenance. UART/SPI/I2C peripherals connect to downstream MCUs or industrial buses.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC30F3010-30I/ML — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC30F3011-30I/ML | DSPIC30F3010-30I/PT | DSPIC30F3010-20I/ML | DSPIC30F2010-30I/MM | DSPIC30F2011-30I/ML |
|---|---|---|---|---|---|---|
| Package | 44-VQFN (8x8) | 44-VQFN (8x8) - same | 44-TQFP (10x10) - same pin count, different package | 44-VQFN (8x8) - same | 28-QFN (6x6) - smaller | 44-VQFN (8x8) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | dsPIC30F, 30 MIPS | dsPIC30F, 30 MIPS | dsPIC30F, 30 MIPS | dsPIC30F, 20 MIPS (-33%) | dsPIC30F, 30 MIPS | dsPIC30F, 30 MIPS |
| Program Memory (Flash) | 24 KB | 30 KB | 24 KB - same | 24 KB - same | 12 KB | 24 KB - same |
| SRAM | 1.5 KB | 2 KB | 1.5 KB - same | 1.5 KB - same | 1 KB | 1.5 KB - same |
| ADC | 12-bit, 13 channels | 12-bit, 9 channels | 12-bit, 13 channels - same | 12-bit, 13 channels - same | 10-bit, 6 channels | 12-bit, 8 channels |
| Motor Control PWM | 6 channels, 3 pairs | 6 channels, 3 pairs - same | 6 channels, 3 pairs - same | 6 channels, 3 pairs - same | 6 channels, 3 pairs - same | 6 channels, 3 pairs - same |
| Supply Voltage | 2.5 V - 5.5 V | 2.5 V - 5.5 V - same | 2.5 V - 5.5 V - same | 2.5 V - 5.5 V - same | 2.5 V - 5.5 V - same | 2.5 V - 5.5 V - same |
| Operating Temperature | -40 °C to +85 °C (Industrial) | -40 °C to +85 °C - same | -40 °C to +85 °C - same | -40 °C to +85 °C - same | -40 °C to +85 °C - same | -40 °C to +85 °C - same |
Ключевые отличия
- Pin-compatible 30-MIPS upgrade with more memory and additional peripherals (против DSPIC30F3010-20I/ML)
- 44-VQFN optimized for compact motor-control boards (против DSPIC30F3010-30I/PT)
- Lower-cost dsPIC30F alternative with smaller pin count (против DSPIC30F2011-30I/ML)
Заметки по проектированию
The DSPIC30F3010-30I/ML 44-VQFN package includes a central exposed thermal pad (EP) that must be soldered to a copper pour on the PCB to meet electrical and thermal targets. Recommended: at least 1 square inch of 2 oz copper on the top layer tied to digital GND (VSS). At 30 MIPS with all peripherals active, internal dissipation can reach approximately 0.5-1 W in motor-control loops; the EP keeps junction temperature below 125 °C in industrial ambient. Per Microchip datasheet 70141F, thermal resistance theta_JA is approximately 32 °C/W for the 44-VQFN with properly soldered EP.
Place a 0.1 µF ceramic decoupling capacitor as close as possible to each VDD pin (pins 7 and 28), plus a bulk 10 µF tantalum or ceramic capacitor on the same VDD trace. For AVDD (pin 43), add an LC or ferrite-bead filter from VDD to isolate analog supply noise from digital switching. Keep ADC traces short and guarded with a ground ring to preserve 12-bit ADC accuracy. PWM traces should be matched-length pairs to minimize dead-time distortion.
Common design pitfalls with the DSPIC30F3010-30I/ML: (1) Forgetting to solder the EP leads to thermal runaway and erratic ADC readings; (2) Leaving the MCLR pin floating causes spurious resets - tie through a 10 kΩ pull-up to VDD; (3) Using 5 V signals on the ADC inputs without checking the analog-input voltage range (0 V to VDD); (4) Configuring PWM for 100% duty cycle without complementary dead-time causes shoot-through in the inverter. Always consult the configuration bits and peripheral library examples in datasheet 70141F before first prototype bring-up.
The DSPIC30F3010-30I/ML uses a modified Harvard bus with separate program and data paths. To maximize signal integrity on the 44-VQFN, route the 16 MHz crystal traces (OSC1/OSC2) symmetrically and keep them short - within 5 mm of the IC. Place a guard ground around the crystal to attenuate coupling from PWM switching edges. If the QEI module is used, route the QEA/QEB pair as a matched differential pair with ground shielding for noise immunity.
Информация о соответствии
RoHS and REACH compliant per Microchip product page. AEC-Q100 not qualified; for automotive, refer to dsPIC33F AEC-Q100 variants. Halogen-free matte-tin finish on QFN package.
