DSPIC33EP128MU204T-I/ML - 16-bit DSC 128KB Flash QFN-44 | Microchip
Артикул: DSPIC33EP128MU204T-I/ML ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.86 | $5,86 |
| 10 | $5.28 | $52,80 |
| 100 | $4.72 | $472,00 |
| 500 | $4.25 | $2.125,00 |
| 1.000 | $3.82 | $3.820,00 |
DSPIC33EP128MU204T-I/ML Обзор
A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice when real-time control loops, fast math, and rich connectivity must coexist in a single chip.
Key features of this part include the 16-bit dsPIC33E core running at up to 70 MIPS from a 3.0 V to 3.6 V supply, DSP instruction extensions (MAC, DSP multiply, modulo addressing), dual CAN 2.0B modules, multiple UART, SPI, and I2C interfaces, and a 12-bit ADC that supports high-speed conversions for current and voltage sensing. The T suffix denotes Tape and Reel packaging for automated pick-and-place assembly.
Architecturally, the dsPIC33EP family uses a modified Harvard pipeline with separate program and data buses, hardware divide support, and flexible interrupt nesting. Dedicated addressing modes and a DSP engine allow single-cycle MAC operations, which is critical for control-loop bandwidth in digital power and motor applications.
Typical applications include digital power supplies (PFC, LLC), brushless DC and PMSM motor control, automotive and industrial CAN networking nodes, and general-purpose embedded control requiring DSP math.
A key design consideration is clock configuration: the internal PLL can multiply the external crystal to reach 70 MIPS, but flash wait states and power draw scale with frequency, so verify the clock plan against the datasheet before committing the layout.
This page synthesizes distributor listings, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-24.
Аналоги без доработки для DSPIC33EP128MU204T-I/ML — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33EP128MU204T-I/ML (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Supply Voltage, Timers, Core.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33EP128MU204-I/ML
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.2 / шт.
Открыть даташит →DSPIC33EP128MC204T-I/ML
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.45 / шт.
Открыть даташит →DSPIC33EP128MC204T-E/ML
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.8 / шт.
Открыть даташит →DSPIC33EP128GP204T-I/ML
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EP256MU204-I/ML
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EP64MU204-I/ML
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EP128MU204T-I/ML Максимальные параметры и электрические характеристики
| Core | 16-bit dsPIC33E DSC |
| Max CPU Speed | 70 MIPS |
| Program Memory (Flash) | 128 KB |
| RAM | 16 KB |
| Напряжение питания | 3.0 V to 3.6 V |
| Рабочая температура | -40C to +85C |
| Корпус | 44-pin QFN (ML), 8x8 mm |
| Тип монтажа | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| ADC Resolution | 12-bit |
| UART Interfaces | 2 |
| SPI Interfaces | 2 |
| I2C Interfaces | 2 |
| CAN Modules | 2 (CAN 2.0B) |
| Timers | Multiple 16-bit timers with PWM/CCP |
| Статус RoHS | Compliant |
Руководство по цоколевке DSPIC33EP128MU204T-I/ML в корпусе 44-pin qfn (ml), 8x8 mm
Цоколевка для DSPIC33EP128MU204T-I/ML (корпус 44-pin qfn (ml), 8x8 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для DSPIC33EP128MU204T-I/ML.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DSPIC33EP128MU204T-I/ML подходит для 6 применениеs: Digital Power Supplies, Brushless DC and PMSM Motor Control, Industrial CAN Networking Nodes, Automotive-Adjacent Embedded Control, IoT Sensor Hubs and Smart Devices, Test, Measurement and Instrumentation.
Digital Power Supplies
The DSPIC33EP128MU204T-I/ML fits digital power conversion such as PFC stages, LLC resonant converters, and LLC/phase-shifted full-bridge designs because its 70 MIPS DSP core executes the control-loop math with single-cycle MAC instructions, and its 12-bit ADC samples current and voltage feedback at the rates these loops demand. Used as the main supervisory and control DSC, it replaces analog control chips with firmware-defined compensation, enabling adaptive mode switching and soft-start profiles. The trade-off versus dedicated analog controllers is firmware development effort, but the MU204 offsets this with Microchip's established digital-power firmware libraries and dual CAN for system telemetry.
Рекомендуется
Brushless DC and PMSM Motor Control
Sensorless FOC on BLDC and PMSM motors requires fast trigonometric math, high-rate current sampling, and deterministic PWM - the DSPIC33EP128MU204T-I/ML provides all three with its 70 MIPS core, DSP multiply-accumulate engine, and 12-bit ADC. In a typical drive, the DSC reads phase currents via the ADC, runs Clarke/Park transforms in firmware, and drives a three-phase inverter gate stage through its PWM peripherals. Where the richest motor-control PWM feature set is needed, the pin-compatible DSPIC33EP128MC204T-I/ML is the purpose-built sibling; the MU204 is preferred when the drive also needs a CAN bus for networked coordination.
Рекомендуется
Industrial CAN Networking Nodes
The dual CAN 2.0B modules are the defining feature of the MU variant, making the DSPIC33EP128MU204T-I/ML a natural fit for CANopen- and J1939-style industrial nodes such as sensor aggregators, actuator controllers, and gateway bridges. Two independent CAN channels allow the same chip to bridge between a vehicle bus and a machine bus, or to run redundant communications in safety-conscious machinery. Its 128 KB Flash accommodates a full protocol stack plus application logic, and the 70 MIPS core leaves headroom for filtering and packet processing. A CAN transceiver such as a 3.3 V-compatible part is required on each bus.
Рекомендуется
Automotive-Adjacent Embedded Control
With the industrial -40C to +85C temperature grade, dual CAN 2.0B, and rich timer resources, the DSPIC33EP128MU204T-I/ML serves non-AEC-Q100 automotive-adjacent roles such as fleet accessories, agricultural equipment controllers, and off-road vehicle body electronics. The DSC handles duty-cycle generation for lamps and actuators, analog sensing through the 12-bit ADC, and bus communication over CAN in a single chip. Designers must note this part is not AEC-Q100 qualified - for true automotive road-vehicle applications, Microchip's automotive-grade variants should be evaluated instead. For industrial vehicles, the MU204 offers a well-supported, low-risk control platform.
Рекомендуется
IoT Sensor Hubs and Smart Devices
The DSPIC33EP128MU204T-I/ML works well as the local intelligence in IoT sensor hubs, aggregating multiple analog sensors through its 12-bit ADC and exposing data over I2C, SPI, or UART to a wireless module. Its 70 MIPS core performs local filtering, FFT-based vibration analysis, and threshold logic without cloud round-trips, while 128 KB Flash stores feature extraction code and calibration tables. The 3.0 V to 3.6 V supply aligns with standard 3.3 V rails and Wi-Fi or BLE module logic levels, simplifying power-tree design. Low-power idle modes extend battery life in duty-cycled monitoring devices.
Рекомендуется
Test, Measurement and Instrumentation
Bench instruments, data loggers, and portable measurement devices benefit from the DSPIC33EP128MU204T-I/ML's combination of DSP throughput and mixed-signal peripherals. The 12-bit ADC digitizes sensor inputs, the DSP engine computes RMS, FFT, and averaging in real time, and multiple UART/SPI/I2C ports interface with front-end converters, displays, and USB-bridge chips. The 128 KB Flash supports protocol handling and a local UI, while 16 KB RAM buffers waveform samples. The industrial temperature grade and QFN-44 footprint suit both handheld and rack-mounted instrument platforms, with CAN providing an option for modular backplane communication.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33EP128MU204T-I/ML — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33EP128MU204-I/ML | DSPIC33EP128MC204T-I/ML | DSPIC33EP128GP204T-I/ML | DSPIC33EP256MU204-I/ML | DSPIC33EP64MU204-I/ML |
|---|---|---|---|---|---|---|
| Package | QFN-44 (ML), 8x8 mm | QFN-44 (ML) - same | QFN-44 (ML) - same | QFN-44 (ML) - same | QFN-44 (ML) - same | QFN-44 (ML) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB | 64 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Peripheral Emphasis | Dual CAN 2.0B (MU) | Dual CAN 2.0B (MU) | Motor-control PWM (MC) | General purpose (GP) | Dual CAN 2.0B (MU) | Dual CAN 2.0B (MU) |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Packaging | Tape & Reel (T) | Tray | Tape & Reel | Tape & Reel | Tray | Tray |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
Ключевые отличия
- Dual CAN 2.0B modules in the MU variant (против DSPIC33EP128GP204T-I/ML)
- Cost-optimized memory option on identical footprint (против DSPIC33EP256MU204-I/ML)
- Connectivity-oriented vs motor-control peripheral set (против DSPIC33EP128MC204T-I/ML)
Заметки по проектированию
Decouple the 3.3 V rail with a 0.1 uF ceramic capacitor at each VDD pin pair plus one 4.7-10 uF bulk capacitor near the IC. The dsPIC33EP family requires all VDD/VSS pairs connected - a commonly missed pin on QFN packages is the center thermal pad, which should be soldered to a grounded array of vias both for heat spreading and for the low-inductance ground reference the 70 MIPS core needs. Estimated: at 70 MIPS the core current is on the order of tens of mA per Microchip typical curves, so a standard 3.3 V LDO rail is sufficient; verify against the datasheet current-versus-MIPS graph.
Keep the crystal or external clock traces short and guard them with a ground pour, since the PLL multiplies the input frequency and jitter couples into ADC results. Route CAN traces as a controlled-impedance pair with a stub length under 1 cm to the transceiver. Use the Peripheral Pin Select (PPS) feature early in layout planning: because UART/SPI/I2C pins are software-mappable, you can optimize trace routing - but the final map must be frozen before firmware release to avoid field incompatibility.
Three recurring pitfalls on dsPIC33EP designs: (1) flash wait states must be configured correctly for 70 MIPS operation or code will misexecute - follow the oscillator and programming sections of the family datasheet; (2) the T suffix means Tape & Reel with moisture sensitivity - bake per MSL floor-life rules if the reel has been open beyond its rated time before reflow; (3) do not rely on the internal RC oscillator for CAN or UART timing - frequency tolerance is inadequate for reliable bus baud rates. Always consult the current silicon errata sheet on the Microchip product page before tape-out.
Информация о соответствии
RoHS compliant per Microchip standard production for the dsPIC33EP family. Not an AEC-Q100 qualified automotive part; verify formal REACH/halogen statements via Microchip compliance documentation.
