DSPIC33EP32GP502T-E/SO - 16-bit DSC 32KB Flash 60MIPS | Microchip
Артикул: DSPIC33EP32GP502T-E/SO ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.42 | $5,42 |
| 10 | $4.92 | $49,20 |
| 100 | $4.31 | $431,00 |
| 500 | $3.85 | $1.925,00 |
| 1.000 | $3.42 | $3.420,00 |
DSPIC33EP32GP502T-E/SO Обзор
A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and control-oriented instruction set of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC such as this part sits above simple 8-bit MCUs and is a direct member of the dsPIC33E family of 16-bit microcontrollers and digital signal controllers.
Key features include a 16-bit dsPIC core with DSP instruction support (MAC, DSP multiply-accumulate), an on-chip 10-bit or 12-bit multi-channel ADC, multiple PWM modules suitable for motor control and power conversion, DMA, brown-out detect/reset, power-on reset, and a watchdog timer. Communication interfaces cover CAN, I2C, SPI, UART/USART, IrDA, and LINbus, enabling integration into automotive and industrial networks.
Technical depth: the DSPIC33EP32GP502 runs from a 3.3V supply and reaches 60 MIPs using its internal PLL from a primary oscillator or internal fast RC oscillator. The Peripheral Trigger Generator (PTG) allows autonomous, hardware-triggered peripheral sequencing, offloading the CPU in real-time control loops. The 33EP general-purpose family also provides CTMU-based touch sensing capability and code-dense instruction execution suited to general-purpose and DSP-blend applications.
Typical applications include automotive body modules and sensor nodes (the -E extended temperature suffix and AEC-Q100 qualification support harsh environments), digital power supplies and motor control leveraging the high-speed PWM and ADC, and industrial CAN-networked control nodes using the integrated CAN 2.0B module.
Design consideration: the VCAP pin requires the datasheet-specified low-ESR capacitor to ground for internal regulator stability; omitting or under-sizing this capacitor is the most common cause of erratic reset behavior on dsPIC33E designs.
This page synthesizes distributor pricing, same-package drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single citable reference. Pricing reflects distributor data as of 2026-09-24.
Аналоги без доработки для DSPIC33EP32GP502T-E/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33EP32GP502T-E/SO (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Core Architecture, RAM, Functional Safety Support.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33EP32GP502T-I/SO
✅ Прямая замена✓ В наличии
$2.2 / шт.
Открыть даташит →DSPIC33EP32GP502-I/SO
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$2.65 / шт.
Открыть даташит →DSPIC33EP64GP502T-E/SO
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EP16GP502T-I/SO
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EP32MC202T-E/SO
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EP32GP502T-E/SO Максимальные параметры и электрические характеристики
| Core Processor | dsPIC 33EP (16-bit) |
| Core Size | 16-bit |
| Speed | 60 MIPs |
| Program Memory Size | 32KB (10.7K x 24) FLASH |
| RAM Size | 2K x 16 |
| Напряжение питания | 3.3 V |
| Number of I/O | 21 |
| Корпус | 28-SOIC (0.295in, 7.50mm width) |
| Рабочая температура | -40C to +125C (extended) |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT, PTG, CTMU |
| ADC Resolution | 10-bit / 12-bit |
| Тип монтажа | Surface Mount |
| Qualification | Automotive, AEC-Q100 |
| Series | dsPIC 33EP |
| Packaging | Tape & Reel (T suffix) |
Конфигурация выводов DSPIC33EP32GP502T-E/SO
| Контакт 1 | MCLR — Master clear reset / programming voltage input (VPP) |
| Контакт 2 | RA0/AN0 — Port A bit 0 / analog input 0 / C1IN1+ / PWM1L |
| Контакт 3 | RA1/AN1 — Port A bit 1 / analog input 1 / C1IN1- / PWM1H |
| Контакт 4 | RA2 — Port A bit 2 / external interrupt / Timer2 external clock |
| Контакт 5 | RA3 — Port A bit 3 / Timer2 external clock / interrupt |
| Контакт 6 | RA4 — Port A bit 4 / clock output / SOSCI |
| Контакт 7 | VDD — Positive supply (3.3V) |
| Контакт 8 | RB0/PWM2L — Port B bit 0 / PWM2L / analog input |
| Контакт 9 | RB1/PWM2H — Port B bit 1 / PWM2H / analog input |
| Контакт 10 | RB2/PWM3L — Port B bit 2 / PWM3L / analog input |
| Контакт 11 | RB3/PWM3H — Port B bit 3 / PWM3H / analog input |
| Контакт 12 | VSS — Ground reference |
| Контакт 13 | RA5/SOSCO — Port A bit 5 / secondary oscillator output |
| Контакт 14 | VCAP — Internal regulator output - connect low-ESR capacitor to VSS |
| Контакт 15 | RB4 — Port B bit 4 / analog input / general purpose I/O |
| Контакт 16 | RB5/PGD3 — Port B bit 5 / In-Circuit Debug programming data |
| Контакт 17 | VDD — Positive supply (3.3V) |
| Контакт 18 | RB6/PGEC3 — Port B bit 6 / In-Circuit Debug programming clock |
| Контакт 19 | RB7/PGD2 — Port B bit 7 / programming data channel 2 |
| Контакт 20 | VSS — Ground reference |
| Контакт 21 | RA6/PGEC2 — Port A bit 6 / programming clock channel 2 |
| Контакт 22 | RA7/PGD1 — Port A bit 7 / programming data channel 1 |
| Контакт 23 | RB8/PWM4L — Port B bit 8 / PWM4L / general purpose I/O |
| Контакт 24 | RB9/PWM4H — Port B bit 9 / PWM4H / general purpose I/O |
| Контакт 25 | VSS — Ground reference |
| Контакт 26 | RB10/PGEC1 — Port B bit 10 / programming clock channel 1 |
| Контакт 27 | RB11/PGD1 — Port B bit 11 / programming data / general purpose I/O |
| Контакт 28 | VDD — Positive supply (3.3V) |
Типичное применение
DSPIC33EP32GP502T-E/SO подходит для 6 применениеs: Automotive Body and Sensor Modules, Digital Power Supply and PFC Control, BLDC and PMSM Motor Control, Industrial CAN Network Nodes, Capacitive Touch Human Interfaces, Portable Instrumentation and Data Loggers.
Automotive Body and Sensor Modules
The DSPIC33EP32GP502T-E/SO fits automotive body electronics because it combines AEC-Q100 qualification, the extended -40C to +125C temperature range of the -E suffix, and an integrated CAN 2.0B module for in-vehicle networking. A typical body-node design uses the 60 MIPs core to run the application plus CAN stack, the 10/12-bit ADC to read resistive sensors and switches, and LINbus-capable UART for sub-network communication. The 28-SOIC package suits cost-sensitive, two-layer boards common in body modules. With 32KB FLASH there is room for diagnostics and OBD-style messaging, while brown-out reset and watchdog timer support functional robustness requirements typical of automotive power rails.
Рекомендуется
Digital Power Supply and PFC Control
Digital SMPS, LLC converters, and PFC stages benefit from the DSPIC33EP32GP502T-E/SO's high-speed PWM modules with programmable dead time and the Peripheral Trigger Generator that fires ADC conversions synchronized to PWM events. The 60 MIPs core executes compensation loops (PI or 3P3Z) within a single PWM period at switching frequencies up to the hundreds of kilohertz range, while the 10/12-bit ADC resolves feedback voltages and currents. The 3.3V, 21-I/O device closes the loop through external gate drivers and feedback dividers. Using a DSC rather than an analog controller enables adaptive startup sequencing, nonlinear gain scheduling, and digital fault logging without changing hardware.
Рекомендуется
BLDC and PMSM Motor Control
Brushless DC and permanent-magnet synchronous motor drives use the DSPIC33EP32GP502T-E/SO to generate a three-phase complementary PWM with hardware dead-time insertion, sample phase currents via the fast ADC triggered by PTG, and run field-oriented or trapezoidal control on the 60 MIPs core. The 2KB RAM holds current controllers and commutation state for small motors, and the 32KB FLASH accommodates sensorless observers such as sliding-mode or BEMF estimation. Its -40C to +125C range suits motor-mounted or enclosed inverter environments. Communication options (CAN or UART) connect the drive to supervisory controllers, and DMA offloads data movement to keep loop timing deterministic.
Рекомендуется
Industrial CAN Network Nodes
Factory automation nodes - remote I/O, actuator controllers, and condition-monitoring sensors - are served well by the DSPIC33EP32GP502T-E/SO's integrated CAN 2.0B controller, which implements the protocol in hardware so the 60 MIPs CPU is free for application logic. The extended temperature range tolerates cabinet and machinery-floor environments, and SPI/I2C ports connect ADCs, EEPROMs, and displays. The 21 GPIO lines handle digital I/O expansion with the remaining peripherals handling timing. Because the controller is a single 28-SOIC device, node BOM cost stays low, and the AEC-Q100 qualification provides the ruggedness margin industrial customers increasingly demand in OEM specifications.
Рекомендуется
Capacitive Touch Human Interfaces
The dsPIC33EP family includes the CTMU (Charge Time Measurement Unit), which enables capacitive touch sensing without a dedicated touch IC: the DSPIC33EP32GP502T-E/SO measures electrode charge time through the CTMU and resolves touch events in firmware using Microchip's touch sensing libraries. Designs such as appliance control panels, industrial keypads, and sealed front panels benefit because the 12 ADC channels can be multiplexed across multiple electrodes while the 60 MIPs core performs filtering and gesture decoding. The -40C to +125C range supports appliances and outdoor equipment, and UART/SPI links report touch state to a host controller, replacing mechanical switches for improved reliability and sealing.
Рекомендуется
Portable Instrumentation and Data Loggers
Battery-powered instruments leverage the DSPIC33EP32GP502T-E/SO's low-power modes and DMA to sample sensors periodically, buffer data in the 2KB RAM, and stream via UART or SPI to nonvolatile storage. The 10/12-bit ADC handles analog sensor front ends directly, while the CTMU can measure precise RC timing for resistive or capacitive probes. The 60 MIPs core applies digital filtering and scaling between samples and returns to sleep to conserve battery. Extended temperature operation suits loggers mounted in engines, HVAC plant, and outdoor enclosures, and the 28-SOIC footprint keeps small PCBs economical for medium-volume instrument production runs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33EP32GP502T-E/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33EP32GP502T-I/SO | DSPIC33EP32GP502-I/SO | DSPIC33EP64GP502T-E/SO | DSPIC33EP32MC202T-E/SO |
|---|---|---|---|---|---|
| Package | 28-SOIC (7.50mm) | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same | 28-SOIC (7.50mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Speed | 60 MIPs | 60 MIPs | 60 MIPs | 60 MIPs | 60 MIPs |
| FLASH Program Memory | 32KB (10.7K x 24) | 32KB | 32KB | 64KB | 32KB |
| RAM | 2KB | 2KB | 2KB | 2KB | 2KB |
| Operating Temperature | -40C to +125C (extended) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +125C (extended) | -40C to +125C (extended) |
| Analog Feature Set | GP: ADC + CTMU, PTG | GP: ADC + CTMU, PTG - same | GP: ADC + CTMU, PTG - same | GP: ADC + CTMU, PTG - same | MC: PWM-focused, reduced analog |
| AEC-Q100 Qualification | Automotive, AEC-Q100 | Standard grade - check variant | Standard grade - check variant | Automotive, AEC-Q100 | Automotive, AEC-Q100 |
Ключевые отличия
- Extended -40C to +125C temperature grade (против DSPIC33EP32GP502T-I/SO)
- Tape & Reel delivery for automated assembly (против DSPIC33EP32GP502-I/SO)
- Cost-optimized 32KB FLASH point (против DSPIC33EP64GP502T-E/SO)
Заметки по проектированию
The dsPIC33EP32GP502 integrates an on-chip regulator whose output appears on the VCAP pin (pin 14 in 28-SOIC). Per Microchip's dsPIC33EP family datasheet, VCAP must be connected to a low-ESR capacitor to VSS; the internal regulator uses this node for core supply filtering. Omitting the capacitor, using a high-ESR type, or routing noisy signals near it causes spurious resets and erratic oscillator behavior. Additionally, decouple all three VDD pins (7, 17, 28) with 0.1uF ceramics placed within 3-5mm of each pin, plus one bulk 4.7-10uF capacitor near the supply entry.
For In-Circuit Serial Programming, reserve access to MCLR (pin 1), the PGD/PGC pairs, and VDD/VSS before routing - the recommended ICSP pair for this device uses RB5 (PGD3) and RB6 (PGEC3), which sit adjacent on pins 16-18, making a single 5-pin programming header convenient. Keep the MCLR trace short and include a 10k pull-up to VDD with an optional 100-470 ohm series resistor for programmer protection. Do not use the PGD/PGC pins for peripherals that toggle during programming sessions, or debugging will conflict with the application circuit.
Configure unused analog-capable pins as digital outputs driving low, or as inputs with external pull resistors, to prevent floating-input oscillation that increases supply current in sleep modes. When using the CTMU or the 12-bit ADC mode, pay attention to acquisition time settings - insufficient acquisition on high-impedance sources produces gain errors rather than obvious noise. Finally, the PLL multiplier means the input oscillator can run well below 60 MIPs equivalent frequency; verify the OSCCON configuration words match your crystal, because incorrect PLL settings are a common bring-up failure on dsPIC33E designs.
Информация о соответствии
Listed as Automotive, AEC-Q100 qualified in DigiKey and Hotenda product data. RoHS and lead-free status per standard Microchip 33EP family product listings; REACH and halogen-free status not explicitly stated in provided data.
