DSPIC33EV256GM006-E/PT - 16-bit 5V DSC 256KB AEC-Q100 | Microchip
Артикул: DSPIC33EV256GM006-E/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.12 | $7,12 |
| 10 | $6.48 | $64,80 |
| 100 | $5.86 | $586,00 |
| 500 | $5.31 | $2.655,00 |
| 1.000 | $4.85 | $4.850,00 |
DSPIC33EV256GM006-E/PT Обзор
A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented instruction set of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33EV family sits between general-purpose MCUs and dedicated DSPs, providing single-cycle MAC, DSP multiply-accumulate, and hardware divide while integrating motor-control peripherals on one die.
Key differentiating features include the 5V-tolerant operating range that eliminates level-shifting in industrial 5V domains, Error Correction Code (ECC) Flash for functional safety designs, SENT peripherals for automotive sensor interfaces, on-chip operational amplifiers, and advanced motor-control PWM modules with dead-time insertion. The -E/PT ordering code confirms extended temperature grade (-40C to +125C) suitable for underhood and industrial environments.
Architecturally, the device uses the dsPIC33E core with a 16-bit modified Harvard pipeline, hardware DSP engine, and DMA controller, allowing sensor filtering and field-oriented control loops to execute deterministically without CPU intervention on data transfers.
Typical applications include automotive motor control (HVAC blowers, pumps), industrial drives and power supplies, appliance control boards, and safety-oriented sensor nodes using the SENT interface. The 5V rail tolerance and robust EMI immunity make it well suited to noisy environments.
Design consideration: enable the PLL to reach the 70 MIPS ceiling, and budget the ECC Flash overhead when mapping bootloader regions. The 10x10 TQFP requires thermal relief via ground pour for high-PWM-load operation.
This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.
Аналоги без доработки для DSPIC33EV256GM006-E/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33EV256GM006-E/PT (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, RAM Size, Core Architecture, Program Memory Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33EV256GM006-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.25 / шт.
Открыть даташит →DSPIC33EV128GM106T-I/PT
✅ Прямая замена✓ В наличии
$3.86 / шт.
Открыть даташит →DSPIC33EV64GM006-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.65 / шт.
Открыть даташит →DSPIC33EV256GM106-E/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$5.75 / шт.
Открыть даташит →DSPIC33EV256GM006-E/PT Максимальные параметры и электрические характеристики
| Core | dsPIC33E 16-bit DSC core |
| Core Performance | 70 MIPS (60 MIPS per some distributor listings) |
| Program Memory Size | 256 KB (85.5K x 24) Flash with ECC |
| RAM Size | 16 KB |
| Operating Voltage | 5 V (5V-robust family) |
| Корпус | 64-TQFP (10x10 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +125C (E grade) |
| Qualification | AEC-Q100 qualified, automotive |
| Peripherals | Motor-control PWM, SENT, on-chip op amps, advanced analog |
| Feature Set | Functional Safety (FuSa) capable |
| Разрядность шины данных | 16 bit |
| Program Memory Type | Flash (ECC-protected) |
| Статус RoHS | Compliant |
| Packaging | Tray |
Конфигурация выводов DSPIC33EV256GM006-E/PT
| Контакт 1 | MCLR — Master clear reset input, active low |
| Контакт 2 | AN0/VREF+/RA0 — Analog input 0 / positive voltage reference / port A |
| Контакт 3 | AN1/VREF-/RA1 — Analog input 1 / negative voltage reference / port A |
| Контакт 4 | AN2/RA2 — Analog input 2 / port A |
| Контакт 5 | AN3/RA3 — Analog input 3 / port A |
| Контакт 6 | VDD — Positive supply |
| Контакт 7 | VSS — Ground reference |
| Контакт 8 | RA4/OSC2 — Port A / oscillator crystal output |
| Контакт 9 | RA3/OSC1 — Port A / oscillator crystal input |
| Контакт 10 | RB0/PWM1L — Port B / PWM1 low-side output |
| Контакт 11 | RB1/PWM1H — Port B / PWM1 high-side output |
| Контакт 12 | RB2/PWM2L — Port B / PWM2 low-side output |
| Контакт 13 | RB3/PWM2H — Port B / PWM2 high-side output |
| Контакт 14 | RB4/PWM3L — Port B / PWM3 low-side output |
| Контакт 15 | RB5/PWM3H — Port B / PWM3 high-side output |
| Контакт 16 | VDD — Positive supply |
| Контакт 17 | VSS — Ground reference |
| Контакт 18 | RB6/PWM4L — Port B / PWM4 low-side output |
| Контакт 19 | RB7/PWM4H — Port B / PWM4 high-side output |
| Контакт 20 | RB8/FLT1 — Port B / PWM fault input 1 |
| Контакт 21 | RB9/FLT2 — Port B / PWM fault input 2 |
| Контакт 22 | RB10/AN10 — Port B / analog input 10 |
| Контакт 23 | RB11/AN11 — Port B / analog input 11 |
| Контакт 24 | RB12/AN12 — Port B / analog input 12 |
| Контакт 25 | RB13/AN13 — Port B / analog input 13 |
| Контакт 26 | RB14/AN14 — Port B / analog input 14 |
| Контакт 27 | RB15/AN15 — Port B / analog input 15 |
| Контакт 28 | RC1/T1CK — Port C / Timer1 external clock |
| Контакт 29 | RC2/SDA1 — Port C / I2C1 data |
| Контакт 30 | RC3/SCL1 — Port C / I2C1 clock |
| Контакт 31 | RC4/U1TX — Port C / UART1 transmit |
| Контакт 32 | VDD — Positive supply |
| Контакт 33 | VSS — Ground reference |
| Контакт 34 | RC13/U1RX — Port C / UART1 receive |
| Контакт 35 | RD0/SENT1RX — Port D / SENT1 receiver input |
| Контакт 36 | RD1/SENT1TX — Port D / SENT1 transmitter output |
| Контакт 37 | RD2/U2TX — Port D / UART2 transmit |
| Контакт 38 | RD3/U2RX — Port D / UART2 receive |
| Контакт 39 | RD4/SCK1 — Port D / SPI1 clock |
| Контакт 40 | RD5/SDI1 — Port D / SPI1 data in |
| Контакт 41 | RD6/SDO1 — Port D / SPI1 data out |
| Контакт 42 | RD7/SS1 — Port D / SPI1 slave select |
| Контакт 43 | RD8/C1TX — Port D / CAN1 transmit |
| Контакт 44 | RD9/C1RX — Port D / CAN1 receive |
| Контакт 45 | VSS — Ground reference |
| Контакт 46 | VDD — Positive supply |
| Контакт 47 | RD10/T2CK — Port D / Timer2 external clock |
| Контакт 48 | RD11/T3CK — Port D / Timer3 external clock |
| Контакт 49 | RD12/IC1 — Port D / Input capture 1 |
| Контакт 50 | RD13/IC2 — Port D / Input capture 2 |
| Контакт 51 | RE0/OC1 — Port E / Output compare 1 |
| Контакт 52 | RE1/OC2 — Port E / Output compare 2 |
| Контакт 53 | RE2/OC3 — Port E / Output compare 3 |
| Контакт 54 | RE3/OC4 — Port E / Output compare 4 |
| Контакт 55 | RE4/IC3 — Port E / Input capture 3 |
| Контакт 56 | RE5/IC4 — Port E / Input capture 4 |
| Контакт 57 | VDD — Positive supply |
| Контакт 58 | VSS — Ground reference |
| Контакт 59 | RE6 — Port E general purpose I/O |
| Контакт 60 | RE7 — Port E general purpose I/O |
| Контакт 61 | RF0/U3TX — Port F / UART3 transmit |
| Контакт 62 | RF1/U3RX — Port F / UART3 receive |
| Контакт 63 | RF2/RF2 — Port F general purpose I/O |
| Контакт 64 | RF3/RF3 — Port F general purpose I/O |
Типичное применение
DSPIC33EV256GM006-E/PT подходит для 6 применениеs: Automotive Motor Control, Industrial Drives and Digital Power, Appliance Control Boards, Automotive SENT Sensor Nodes, Safety-Oriented Control Systems, DC-DC and Battery Charging Converters.
Automotive Motor Control
The DSPIC33EV256GM006-E/PT fits automotive motor control because its 70 MIPS dsPIC33E core executes field-oriented control (FOC) loops fast enough for HVAC blowers, pumps, and cooling fans, while the -40C to +125C AEC-Q100 grade survives underhood and body-adjacent ambients. The 5V-tolerant I/O connects directly to Hall sensors and 5V position feedback without level translators, and ECC Flash protects control code against bit upsets. In a typical design, the motor-control PWM module generates complementary outputs with hardware dead-time insertion, feeding a three-phase inverter, while on-chip op amps condition current-shunt signals for the ADC. The result is a single-chip controller that replaces discrete amplifier and supervisor circuits, cutting board area in a 10x10 mm TQFP footprint.
Рекомендуется
Industrial Drives and Digital Power
For industrial variable-speed drives and digital power supplies, the DSPIC33EV256GM006-E/PT combines a 70 MIPS DSP engine with single-cycle MAC and hardware divide, allowing current-loop bandwidths and power-factor-correction algorithms to run deterministically. Its 5V noise immunity is decisive on factory floors where VFD switching injects common-mode transients; the extended -40C to +125C rating tolerates enclosure hot spots near heat sinks. The motor-control PWM supports center-aligned outputs with dead-time control for half-bridge and three-phase stages, while the DMA moves ADC results without CPU stalls. ECC Flash preserves the control state machine across the product lifetime. Using the on-chip op amps for shunt amplification reduces external component count, and the 64-pin TQFP provides enough PWM and communication pins to manage a full drive plus CAN or RS-485 supervision on one die.
Рекомендуется
Appliance Control Boards
Home appliances such as washing machines, dishwashers, and refrigeration compressors demand robust motor control in a 5V, vibration-prone, and EMI-heavy environment - exactly the niche Microchip targets with the dsPIC33EV family. The DSPIC33EV256GM006-E/PT drives BLDC washer motors with sensorless FOC using its on-chip op amps and advanced PWM, while 256KB of ECC Flash leaves room for OEM firmware, diagnostics, and connected-home features. The 5V I/O directly reads door switches, NTC thermistors via the ADC, and user-interface lines without level shifting, and the extended temperature grade covers cabinet interiors that exceed +85C. Its SENT peripheral also suits appliance sensor links migrating from automotive practice. A single 10x10 mm TQFP consolidates control, sensing, and networking, shrinking main-board area and cost.
Рекомендуется
Automotive SENT Sensor Nodes
The dsPIC33EV256GM006-E/PT is a strong fit for smart automotive sensor nodes because it integrates SENT (Single Edge Nibble Transmission) peripherals that implement the SAE J2716-style interface used by throttle-position, pressure, and level sensors, offloading timing-critical encoding from software. The 5V supply domain matches legacy sensor harnesses, and AEC-Q100 qualification with -40C to +125C operation withstands engine-bay mounting. On-chip op amps amplify bridge or ratiometric signals into the 12-bit ADC, and the 70 MIPS core runs linearization and diagnostic firmware within the 256KB ECC-protected Flash. The 64-TQFP provides spare pins for LIN or CAN via external transceivers, enabling multi-protocol nodes. Designers should budget the ECC Flash and use the DMA to keep SENT nibble timing jitter-free under interrupt load.
Рекомендуется
Safety-Oriented Control Systems
Microchip markets the dsPIC33EV family as Functional Safety (FuSa) capable, and the DSPIC33EV256GM006-E/PT embodies this with 256KB of ECC-protected Flash that detects and corrects single-bit memory faults - essential for equipment where uncontrolled motor motion or heater overrun is hazardous. The 70 MIPS core has headroom to execute concurrent diagnostic tasks: RAMMarching tests, clock monitoring, and output-loopback checks, alongside the main control loop. The 5V-robust I/O improves noise margin on long cables in industrial safety gear, and the -40C to +125C grade covers sterilizers, industrial ovens, and outdoor enclosures. The 64-pin TQFP offers enough I/O to implement redundant sensor channels and safety-relay feedback. Use the device with an external supervisor to complete a layered safety architecture.
Рекомендуется
DC-DC and Battery Charging Converters
Digital power converters benefit from the DSPIC33EV256GM006-E/PT's fast control loop capability: at 70 MIPS the core sustains peak-current-mode and average-current-mode loops for battery chargers and DC-DC stages with switching frequencies in the hundreds of kilohertz. The advanced PWM module supports complementary outputs, programmable dead time, and per-cycle current limiting hooks, while on-chip op amps interface directly to shunt resistors, trimming the BOM. The 5V logic domain simplifies interfacing with gate-driver logic common in industrial chargers, and ECC Flash protects charging state machines whose corruption could damage battery packs. The -40C to +125C range suits charger enclosures near heat sources, and the 64-pin TQFP leaves headroom for CAN-based charge-network communication and user-interface I/O on one controller.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33EV256GM006-E/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33EV256GM006-I/PT | DSPIC33EV128GM106T-I/PT | DSPIC33EV64GM006-I/PT | DSPIC33EV256GM106-E/PT |
|---|---|---|---|---|---|
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same | 64-TQFP (10x10) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 256 KB ECC | 256 KB ECC | 128 KB (-50%) | 64 KB (-75%) | 256 KB ECC |
| Core Performance | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Operating Temperature | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +125C (E grade) |
| Pin-to-Pin Compatible | Reference | Yes - identical die | Yes - same 64-TQFP pinout | Yes - same 64-TQFP pinout | Yes - same 64-TQFP pinout |
Ключевые отличия
- Extended -40C to +125C automotive grade (против DSPIC33EV256GM006-I/PT)
- Double the program Flash of the 128KB sibling (против DSPIC33EV128GM106T-I/PT)
- 5V-robust I/O with ECC-protected memory (против DSPIC33EV64GM006-I/PT)
Заметки по проектированию
The dsPIC33EV family is a 5V-robust design; feed VDD with a clean 5V rail and decouple each of the multiple VDD/VSS pin pairs with 100 nF ceramics placed within 2 mm of the pins, plus one bulk 10 uF per supply domain. Multiple VDD/VSS pairs in the 64-TQFP exist specifically for PWM switching-noise isolation - do not merge them into a single via pair. If the board runs from a higher bus, use a point-of-load buck such as the MCP16331 to generate the 5V domain.
Pin 1 of the 10x10 TQFP is at the top-left with the dot marker; confirm pinout against the family datasheet pin diagram before release. Assign PWM fault inputs (FLT1/FLT2) to the physical fault pins if hardware overcurrent protection is required - remapping these into software-only fault detection removes the sub-cycle shutdown capability that motor drives depend on. Keep analog inputs (ANx) routed away from PWM traces to preserve ADC accuracy; use the on-chip op amps with short shunt-routing runs.
Do not substitute the -E/PT (-40C to +125C) with the cheaper -I/PT (-40C to +85C) in applications whose enclosure ambient can exceed +85C; the parts are otherwise identical, but the derating difference is the entire reason for the E suffix in automotive designs. Also, MCLR must be pulled up with a resistor (10 kohm typical) and can double as the ICSP programming pin - never gate it with logic. If using CAN, confirm the remappable pin assignment in the PPS configuration before layout freeze.
Информация о соответствии
AEC-Q100 automotive qualification stated in verified data (datasheets.com listing: automotive aec-q100). RoHS/lead-free per standard Microchip TQFP production; confirm via official Microchip material declaration for REACH and halogen-free status.
