DSPIC33EV32GM006T-I/PT - 16-bit 70 MIPS 5V DSC | Microchip
Артикул: DSPIC33EV32GM006T-I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.62 | $4,62 |
| 10 | $4.2 | $42,00 |
| 100 | $3.74 | $374,00 |
| 500 | $3.38 | $1.690,00 |
| 1.000 | $3.05 | $3.050,00 |
DSPIC33EV32GM006T-I/PT Обзор
A digital signal controller combines the control peripherals of a microcontroller with the computational core of a digital signal processor. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering deterministic real-time control loops plus math acceleration for motor control, digital power conversion, and sensor fusion. The dsPIC33EV family extends this concept to 5V operation, which is a major differentiator from 3.3V-only competitors.
Key features include a 16-bit modified Harvard architecture core running at up to 70 MIPS, native 5V tolerance that eliminates level-shifting in automotive and industrial 12V-derived systems, functional-safety (FuSa) documentation support, DSP engine with 40-bit accumulators, and multiple serial interfaces (UART, SPI, I2C) plus CAN for in-vehicle networking.
Technically, the dsPIC33EV core includes a barrel shifter, dual operand fetch, and hardware division support, with 4 DMA channels offloading data movement from the CPU. Seven timers plus input capture and output compare/PWM modules enable precise motor commutation and switch-mode power-supply control. The 12-bit ADC with multiple sample-and-hold inputs supports simultaneous multi-channel sampling for three-phase current sensing.
Typical applications include brushless DC and PMSM motor drives, automotive sensors and touch/control units, digital power supplies (LLC, PFC), and harsh-environment industrial nodes exposed to noise and vibration, where the 5V noise margin is a decisive advantage.
Design consideration: exploit the 5V core but verify ADC reference stability and decouple all VDD/VSS pin pairs; use any PGECx/PGEDx pair consistently for ICSP programming.
This page synthesizes distributor pricing, drop-in family alternatives, and design guidance not consolidated in the manufacturer datasheet.
Аналоги без доработки для DSPIC33EV32GM006T-I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33EV32GM006T-I/PT (тот же форм-фактор и посадочное место) — отличается по Core, RAM Size, Package, Operating Temperature, Supply Voltage.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33EV256GM106T-I/PT
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →DSPIC33EV128GM106T-I/PT
✅ Прямая замена✓ В наличии
$3.86 / шт.
Открыть даташит →DSPIC33EV256GM106T-E/PT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EV64GM106T-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.08 / шт.
Открыть даташит →DSPIC33EV64GM006T-I/PT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33EV32GM006T-I/PT Максимальные параметры и электрические характеристики
| Core | dsPIC33EV 16-bit DSC |
| CPU Speed | 70 MIPS (max) |
| Program Memory Size | 32KB (11K x 24) Flash |
| RAM Size | 4KB |
| Напряжение питания | 5 V |
| Разрядность шины данных | 16 bit |
| Timers | 7 |
| DMA Channels | 4 |
| Корпус | 64-TQFP (10x10 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +85C (I grade) |
| Packaging Suffix | T (Tape & Reel) |
| Functional Safety | FuSa support package available |
| Programming Interface | ICSP (PGECx/PGEDx pairs) |
| Family | dsPIC33EV GM |
| Serial Interfaces | UART, SPI, I2C, CAN |
Руководство по цоколевке DSPIC33EV32GM006T-I/PT в корпусе 64-tqfp (10x10 mm)
Цоколевка для DSPIC33EV32GM006T-I/PT (корпус 64-tqfp (10x10 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для DSPIC33EV32GM006T-I/PT.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DSPIC33EV32GM006T-I/PT подходит для 6 применениеs: BLDC/PMSM Motor Control, Automotive Sensors and Control Units, Digital Power Supplies (LLC/PFC), Industrial Automation Nodes, Home Appliance Control, Sensor Fusion and Data Acquisition.
BLDC/PMSM Motor Control
The DSPIC33EV32GM006T-I/PT fits motor control because its 70 MIPS DSP core executes field-oriented control inner loops deterministically, while the hardware multiply-accumulate and barrel shifter handle Park/Clarke transforms without software overhead. Seven timers and PWM-capable output compare modules generate three-phase complementary gate waveforms with dead time. The 12-bit ADC supports multi-channel simultaneous sampling of phase currents for closed-loop commutation. In a typical topology, the DSC sits between current-shunt amplifiers and a gate driver, updating PWM duty at 10-20 kHz. Operating at 5V provides superior noise immunity near switching power stages compared with 3.3V controllers, reducing false-trigger risk in industrial drive environments.
Рекомендуется
Automotive Sensors and Control Units
Microchip positions the dsPIC33EV GM family explicitly for automotive sensors and touch/control units operating in harsh environments with noise and vibration, per the official family page. The 5V core tolerates load-dump-adjacent rail conditions better than 3.3V devices and directly interfaces with ratiometric sensors outputting 0-5V. The on-chip CAN interface connects to in-vehicle networks, and the FuSa (functional safety) support package assists ISO-oriented development documentation. The 32KB Flash suits compact sensor nodes such as position, pressure, and flow sensors with LIN/CAN reporting. Using the E-grade DSPIC33EV256GM106T-E/PT extends the ambient rating to +125C for under-hood placements while keeping the same 64-TQFP footprint.
Рекомендуется
Digital Power Supplies (LLC/PFC)
Digital power conversion benefits from the DSPIC33EV32GM006T's fast core and precision analog: 70 MIPS permits control-loop execution at switching frequencies of 100 kHz and above for PFC and LLC topologies, and the 12-bit ADC with multiple sample-and-hold circuits samples input/output voltage and current near the switching instant. PWM modules support complementary outputs, phase-shifted operation, and fault trip inputs for cycle-by-cycle current limiting. Unlike analog-only controllers, firmware enables adaptive burst mode and telemetry via UART or CAN. The 5V supply simplifies interfacing with gate drivers referenced to logic rails. Designers should reserve Flash headroom, making the pin-compatible 64KB/128KB family variants attractive during algorithm iteration.
Рекомендуется
Industrial Automation Nodes
In factory-floor sensor and actuator nodes, the DSPIC33EV32GM006T combines robust 5V signaling with a rich peripheral set: multiple UART/SPI/I2C ports link to displays, memory, and industrial transceivers, while CAN supports fieldbus gateways. Four DMA channels move ADC and communication data without CPU intervention, keeping control loops jitter-free under heavy I/O traffic. The industrial -40C to +85C rating covers cabinet and machinery environments, and 5V logic directly drives optocoupler and relay-driver inputs common on PLC I/O boards. Its DSP instructions also enable on-node FFT-based vibration monitoring or power-quality metering, reducing host loading in distributed Industry 4.0 architectures.
Рекомендуется
Home Appliance Control
Appliance main controls are a target application named by Microchip for the dsPIC33EV family, and the 32KB Flash of this part is sized for motor control plus user-interface logic in washers, fans, compressors, and pumps. The 5V core withstands the electrically noisy environment created by triac loads and switched motors without elaborate isolation, and the ADC reads NTC thermistors and potentiometers ratiometrically without external references. Timer-based PWM drives BLDC circulation pumps quietly, while input-capture peripherals decode zero-crossing for ac synchronized control. Surge and vibration tolerance, plus a low-cost 64-TQFP footprint with generous I/O for keys, LEDs, and display segments, make it a single-chip appliance controller.
Рекомендуется
Sensor Fusion and Data Acquisition
The DSPIC33EV32GM006T serves as an acquisition front-end where its DSP engine applies filtering (IIR/FIR) to sampled data before transmission. The 12-bit ADC samples multi-channel signals with DMA offload, and 4KB RAM buffers frames for SPI/I2C or UART streaming to a host. Fixed-point DSP instructions run at 70 MIPS, allowing 1-2 kHz sample rates across dozens of channels with real-time digital filtering, anti-aliasing compensation, and threshold alarms computed locally. Typical systems include vibration monitors, weigh-scale front ends, and battery-pack sensing, where 5V ADC full-scale improves signal-to-noise versus 3.3V inputs. The pin-compatible 256KB sibling enables logged-data algorithms as complexity grows.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33EV32GM006T-I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33EV256GM106T-I/PT | DSPIC33EV128GM106T-I/PT | DSPIC33EV256GM106T-E/PT |
|---|---|---|---|---|
| Package | 64-TQFP (PT) | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Flash Memory | 32KB (11K x 24) | 256KB | 128KB | 256KB |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) |
| Pin-to-Pin Compatible | Base 64-pin GM006 map | Yes | Yes | Yes |
Ключевые отличия
- 5V native operation with noise immunity (против 3.3V-only 16-bit MCUs (e.g., DSPIC33EP64MC504-E/MV))
- Functional Safety (FuSa) support (против DSPIC33EV256GM106T-I/PT)
- Pin-compatible Flash scaling path (против DSPIC33EV256GM106T-I/PT)
Заметки по проектированию
Provide a clean 5V rail with local decoupling: place 100 nF ceramic capacitors at every VDD/VSS pin pair of the 64-TQFP, plus one bulk 4.7-10 uF capacitor per power domain. Per the NSDSP programming notes for dsPIC33EV32GM006, ALL VDD and VSS pins must be connected - leaving a pair floating causes erratic behavior and programming failures. If the 5V rail comes from a switching pre-regulator, add an LC filter to keep ADC noise low.
The device provides multiple PGECx/PGEDx pairs for ICSP. Per the NSDSP support page for dsPIC33EV32GM006, you can use any pair, but ICSPCLK and ICSPDAT must come from the same pair (e.g., PGEC2 with PGED2). Routing different pairs to a single programming header is a common layout error that blocks field programming. Also reserve header access on production boards - 32KB Flash invites firmware updates.
Keep analog sensing traces (ADC inputs) away from PWM and CAN lines to exploit the 12-bit ADC resolution; use a quiet analog ground region under the ADC pin cluster. For 5V designs directly interfacing sensors, place RC anti-alias filters (e.g., 1 k ohm / 10 nF) close to the ADC pins. Fan out the 10x10 mm TQFP with 0.5 mm pitch using standard 6/6 mil design rules; avoid acid traps in the 0.5 mm channel.
Estimated: at 70 MIPS with moderate I/O loading, typical core current for the dsPIC33EV family is on the order of tens of mA at 5V (order of 0.1-0.3 W dissipation), so the 64-TQFP needs no heatsink. Confirm with the datasheet electrical characteristics for your exact clock and peripheral configuration; idle and doze modes cut consumption significantly in battery-backed nodes.
Информация о соответствии
RoHS/lead-free per Microchip standard production policy for dsPIC33EV TQFP parts; formal RoHS/REACH certificate for this exact MPN should be confirmed on the Microchip product page compliance documents.
