DSPIC33FJ12MC201-E/P - 16-bit Motor Control DSC, 12KB Flash | Microchip
Артикул: DSPIC33FJ12MC201-E/P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.72 | $4,72 |
| 10 | $4.18 | $41,80 |
| 100 | $3.56 | $356,00 |
| 500 | $3.02 | $1.510,00 |
| 1.000 | $2.58 | $2.580,00 |
DSPIC33FJ12MC201-E/P Обзор
A Digital Signal Controller (DSC) is a hybrid architecture that combines a microcontroller's deterministic control capabilities with a digital signal processor's computational throughput. Within the taxonomy, a DSC sits between microcontrollers and DSPs, enabling single-chip implementations of closed-loop control algorithms such as field-oriented control (FOC), space vector modulation, and PI/PID compensation. The dsPIC33FJ12MC201 belongs to the dsPIC33F family, which targets motor control, power conversion, and sensorless control applications with on-chip peripherals like PWM, ADC, and quadrature encoder interfaces.
Key features of the DSPIC33FJ12MC201 include a 40 MHz clock with 16 MIPS instruction throughput, a single-cycle 16x16-bit hardware multiplier, and dual 40-bit accumulators that enable efficient DSP operations. The device includes a Flash-based program memory architecture, supporting in-circuit serial programming (ICSP) and runtime self-programming. Integrated peripherals include multiple PWM modules for three-phase motor drive, a 10-bit ADC with multiple channels, and UART/SPI/I2C communication interfaces for system connectivity.
Technically, the DSPIC33FJ12MC201-E/P uses a modified Harvard architecture with separate program and data buses, allowing simultaneous fetch and access. The 'E' suffix indicates an extended operating temperature range of -40C to +125C, suitable for industrial and harsh-environment deployments. The device supports seamless migration options to PIC24F, PIC24H MCUs, and dsPIC30F DSCs in similar packages, enabling design reuse across product families.
Typical applications include BLDC and PMSM motor controllers, sensorless fan and pump drivers, small appliance motor drives, and low-cost industrial automation modules. The 20-pin PDIP package suits through-hole designs, prototype boards, and educational development platforms where socketed mounting is preferred.
When designing with this part, ensure proper decoupling of all VDD/VSS pairs and follow Microchip's dsPIC33F Family Reference Manual guidance for motor-control peripheral configuration. The PDIP package's larger thermal mass supports continuous operation without heatsinking at typical motor-control duty cycles.
This page synthesizes distributor pricing, same-family drop-in alternatives from the Site MPN list, and practical motor-control design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для DSPIC33FJ12MC201-E/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33FJ12MC201-E/P (тот же форм-фактор и посадочное место) — отличается по Package, Core Architecture, Operating Temperature, ADC, Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33FJ12MC201-I/P
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33FJ12GP202-I/SP
✅ Прямая замена✓ В наличии
$2.69 / шт.
Открыть даташит →DSPIC33FJ12GP201-E/SO
✅ Прямая замена✓ В наличии
$2.18 / шт.
Открыть даташит →PIC18F2420-I/SP
✅ Прямая замена✓ В наличии
$5.22 / шт.
Открыть даташит →DSPIC33FJ12MC201-E/P Максимальные параметры и электрические характеристики
| Product Type | Digital Signal Controller (DSC) |
| Core Architecture | 16-bit dsPIC33F modified Harvard |
| Operating Frequency | 40 MHz (16 MIPS) |
| Program Memory | 12 KB Flash |
| Data RAM | 1 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Диапазон рабочих температур | -40 C to +125 C (E suffix) |
| I/O Pins | 21 |
| Working Registers | 16 x 16-bit |
| Hardware Multiplier | 16 x 16-bit single-cycle |
| Accumulators | Dual 40-bit |
| Package Type | 20-pin PDIP (P) |
| Тип монтажа | Through-Hole |
| Уровень MSL | 1 (unlimited) |
| Статус RoHS | Compliant |
| Programming Interface | ICSP (In-Circuit Serial Programming) |
| Debug Interface | ICD / ICSP via PGECx/PGEDx pins |
Конфигурация выводов DSPIC33FJ12MC201-E/P
| Контакт 1 | MCLR — Master Clear (reset) input, active low |
| Контакт 2 | PGED1/AN0 — ICSP data / analog input 0 |
| Контакт 3 | PGEC1/AN1 — ICSP clock / analog input 1 |
| Контакт 4 | PGED2/AN2 — ICSP data alternate / analog input 2 |
| Контакт 5 | PGEC2/AN3 — ICSP clock alternate / analog input 3 |
| Контакт 6 | VSS — Ground reference |
| Контакт 7 | PWM1H/AN4 — PWM output 1 high-side / analog input 4 |
| Контакт 8 | PWM1L/AN5 — PWM output 1 low-side / analog input 5 |
| Контакт 9 | PWM2H — PWM output 2 high-side |
| Контакт 10 | PWM2L — PWM output 2 low-side |
| Контакт 11 | PWM3H — PWM output 3 high-side |
| Контакт 12 | PWM3L — PWM output 3 low-side |
| Контакт 13 | VDD — Positive supply (3.3V typical) |
| Контакт 14 | INT0/RB0 — External interrupt 0 / port B bit 0 |
| Контакт 15 | RB1 — Port B bit 1 |
| Контакт 16 | RB2 — Port B bit 2 |
| Контакт 17 | RB3 — Port B bit 3 |
| Контакт 18 | RB4 — Port B bit 4 |
| Контакт 19 | OSC1/RC12 — Crystal oscillator input / port C bit 12 |
| Контакт 20 | OSC2/RC15 — Crystal oscillator output / port C bit 15 |
Типичное применение
DSPIC33FJ12MC201-E/P подходит для 6 применениеs: BLDC Motor Controller, PMSM Servo Drive, Small Appliance Motor Control, Sensorless Fan and Pump Controller, Low-Cost Industrial Automation Module, Educational Motor-Control Development Platform.
BLDC Motor Controller
The DSPIC33FJ12MC201-E/P is purpose-built for brushless DC (BLDC) motor control in compact appliances and small industrial drives. Its six dedicated PWM outputs (PWM1H/L, PWM2H/L, PWM3H/L) drive a three-phase inverter directly, while the 40 MHz core delivers 16 MIPS to execute field-oriented control (FOC) loops in real time. The dual 40-bit accumulators handle the Park and Clarke transforms required for sinusoidal commutation, and the 10-bit ADC samples phase currents fast enough for torque control at 20 kHz switching frequency. Compared with a generic 8-bit MCU, the dsPIC33F's single-cycle 16x16 hardware multiplier completes vector rotations 4-5x faster, reducing CPU load and enabling higher PWM frequencies for quieter motor operation.
Рекомендуется
PMSM Servo Drive
Permanent Magnet Synchronous Motor (PMSM) servo drives benefit from the DSPIC33FJ12MC201-E/P's DSP extensions and deterministic interrupt latency. The device's 16 MIPS throughput supports simultaneous FOC, space vector modulation (SVM), and encoder feedback processing within a single PWM cycle. The 21 I/O pins allocate cleanly to three PWM pairs, quadrature encoder inputs, fault lines, and a UART for command interface. The extended -40 C to +125 C temperature range allows placement near the power stage in sealed industrial enclosures without thermal derating. For sensorless PMSM control using BEMF zero-crossing detection, the device's ADC sampling window and PWM-triggered conversions synchronize precisely, eliminating the software jitter that plagues generic microcontrollers.
Рекомендуется
Small Appliance Motor Control
Small home appliances such as washing machines, dishwashers, range hoods, and ceiling fans are ideal deployment scenarios for the DSPIC33FJ12MC201-E/P. Its 20-pin PDIP package suits through-hole assembly common in high-volume appliance manufacturing, and the 12 KB Flash accommodates full motor-control firmware plus a UART bootloader for field updates. The 3.3V supply rail with low quiescent draw suits energy-star compliant standby modes. Compared with 8-bit PIC alternatives like PIC18F2420-I/SP, the dsPIC33F executes the same FOC loop with 3-4x CPU headroom remaining for user interface, safety monitoring, and fault logging - all within the same 20-28 pin footprint. The device's industrial temperature grade handles under-counter or garage installations where ambient temperatures swing widely.
Рекомендуется
Sensorless Fan and Pump Controller
Sensorless BLDC fan and pump controllers use back-EMF zero-cross detection rather than Hall sensors, and the DSPIC33FJ12MC201-E/P is well suited to this technique. The device's flexible PWM/ADC triggering allows precise BEMF sampling at the PWM off-time, while the 40 MIPS throughput executes the sensorless state machine with comfortable margin. The 21 I/O pins accommodate three half-bridges, a tachometer output, an analog speed-input, and a UART for diagnostics. The 20-pin PDIP package is well-matched to the through-hole assemblies common in HVAC blowers, water pumps, and PC case fans, where the extended -40 C to +125 C range handles under-hood or attic environments. Designers can also leverage the ICSP interface for factory calibration of motor parameters.
Рекомендуется
Low-Cost Industrial Automation Module
Low-cost industrial automation modules such as stepper motor indexers, solenoid drivers, and small conveyor controllers can leverage the DSPIC33FJ12MC201-E/P for precise PWM and timing. The device's hardware 16-bit timer and PWM modules generate accurate step pulses for stepper drives, while the UART/SPI/I2C peripherals communicate with industrial networks (Modbus RTU, CANopen, or RS-485) via external transceivers. The extended -40 C to +125 C temperature range supports cabinet-mounted installations near heat sources. With 12 KB Flash and 1 KB RAM, the device accommodates motion-control firmware plus a small command interpreter, all within the compact 20-pin PDIP footprint. Compared with discrete logic implementations, the dsPIC33F reduces BOM cost and PCB area while adding flexibility for late-stage firmware customization.
Рекомендуется
Educational Motor-Control Development Platform
The DSPIC33FJ12MC201-E/P is widely used in university and hobby motor-control courses because its 20-pin PDIP package is socketed and breadboard-friendly. Students can prototype FOC algorithms using Microchip's MPLAB X IDE with the free XC16 compiler, then download via the ICSP interface using a PICkit 3 or PICkit 4 programmer. The dsPIC33F Family Reference Manual provides detailed peripheral documentation, while the Microchip Application Notes (AN1078, AN1206) walk through sensorless and sensored motor-control implementations step by step. Compared with modern surface-mount variants, the PDIP package survives multiple prototype iterations without PCB rework, and the device's broad tolerance for code variants makes it forgiving for first-time embedded developers. The extended temperature grade also lets student projects operate in lab, garage, and outdoor test environments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33FJ12MC201-E/P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33FJ12MC201-I/P | DSPIC33FJ12GP202-I/SP | DSPIC33FJ12GP201-E/SO | PIC18F2420-I/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin PDIP | 20-pin PDIP (same) | 28-pin SPDIP | 20-pin SOIC | 28-pin SPDIP |
| Core Architecture | 16-bit dsPIC33F | 16-bit dsPIC33F (same) | 16-bit dsPIC33F (same) | 16-bit dsPIC33F (same) | 8-bit PIC18 |
| Operating Frequency | 40 MHz / 16 MIPS | 40 MHz / 16 MIPS (same) | 40 MHz / 16 MIPS (same) | 40 MHz / 16 MIPS (same) | 40 MHz / 10 MIPS |
| Program Memory | 12 KB Flash | 12 KB Flash (same) | 12 KB Flash (same) | 12 KB Flash (same) | 16 KB Flash |
| Data RAM | 1 KB | 1 KB (same) | 1 KB (same) | 1 KB (same) | 768 B |
| Operating Temperature | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C (same) | -40 C to +85 C |
| Dedicated PWM Modules | Yes (motor control PWM, 6 outputs) | Yes (same) | Yes (general purpose PWM) | Yes (general purpose PWM) | Yes (CCP/ECC, 2 outputs) |
| ADC Type | 10-bit, 6 channels | 10-bit, 6 channels (same) | 12-bit, 12 channels | 12-bit, 10 channels | 10-bit, 10 channels |
| DSP Engine | Yes (dual 40-bit accumulators, MAC) | Yes (same) | Yes (same) | Yes (same) | No (8-bit MCU) |
Ключевые отличия
- Dedicated motor-control PWM engine with six outputs (против PIC18F2420-I/SP)
- 16-bit DSC core with DSP extensions and dual 40-bit accumulators (против PIC18F2420-I/SP)
- Extended -40 C to +125 C operating temperature range (против DSPIC33FJ12MC201-I/P)
Заметки по проектированию
The DSPIC33FJ12MC201-E/P requires a stable 3.0V to 3.6V supply, typically 3.3V nominal. Decouple every VDD/VSS pin pair with a 100 nF ceramic capacitor placed within 5 mm of the pins, and add a bulk 10 uF tantalum or ceramic capacitor near the package. For switching regulator supplies, add a ferrite bead or pi-filter to attenuate switching ripple that could couple into the analog VREF+ input. Power-supply sequencing is not required because the dsPIC33F family supports simultaneous VDD/VSS ramp-up, but ensure ramp time stays between 0.01 ms and 100 ms per the datasheet document 70265b to avoid BOR latch-up.
Place the ICSP programming header (PGECx, PGEDx, MCLR, VDD, VSS) at the board edge for easy in-circuit programming access. Route the crystal traces (OSC1, OSC2) symmetrically with short, parallel traces and surround them with a ground guard ring to reduce EMI pickup. The analog input traces (ANx) should be routed away from the PWM outputs to avoid capacitive coupling of switching noise into ADC samples. For motor-control PCBs, use a four-layer stackup with a dedicated ground plane beneath the dsPIC and motor driver to provide low-impedance return paths for the high di/dt switching currents.
Do not exceed the 3.6V absolute maximum on any VDD pin; the dsPIC33F family does not include 5V tolerance on most I/O. When migrating from PIC24F prototypes, ensure all pull-ups on I/O pins are removed or reduced to 3.3V-compliant values. The MCLR pin requires a 10 kohm pull-up to VDD for normal operation; leaving it floating causes intermittent resets. When using the internal RC oscillator for cost-sensitive designs, calibrate the FREQ tuning register against a precision reference during production to maintain UART baud-rate accuracy.
Информация о соответствии
RoHS and REACH compliant per Microchip product page; lead-free and halogen-free per datasheet document 70265b. Not AEC-Q100 qualified - the -E temperature grade supports industrial use but not automotive safety-critical applications. Choose dsPIC33CH or dsPIC33CK families for AEC-Q100 qualified alternatives.
