EP20K600CF1020C8 - APEX 20KC 600K Gate FPGA, 1020-BGA | Altera
Артикул: EP20K600CF1020C8 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $145 | $145,00 |
| 10 | $132 | $1.320,00 |
| 100 | $118 | $11.800,00 |
| 500 | $105 | $52.500,00 |
| 1.000 | $92 | $92.000,00 |
EP20K600CF1020C8 Обзор
What is an APEX 20KC FPGA? The APEX 20KC family belongs to the broader category of programmable logic devices (PLDs), which sit hierarchically under FPGAs (Field-Programmable Gate Arrays) and CPLDs (Complex Programmable Logic Devices). APEX 20KC extends the original APEX 20K architecture by embedding dedicated True-Look-Up-Table memory blocks called ESBs (Embedded System Blocks), enabling single-chip implementation of logic, on-chip memory, and specialty functions such as CAMs and FIFOs. It occupies a specific position in the historical Altera roadmap between APEX 20K (logic-only) and the later Stratix family.
Key features include MultiVolt I/O support for 1.8 V, 2.5 V, and 3.3 V interfaces, hot-socketing capability, JTAG IEEE 1149.1 boundary-scan testing, and a 4-wire serial configuration interface. The PLLs provide flexible clock management, while the ESBs can be configured as dual-port RAM up to 311 Kbit, ROM, or CAM. The device also supports DDR SDRAM and ZBT SRAM external memory interfaces through dedicated I/O circuitry.
Typical applications include telecommunications line cards, PCI bridge designs, high-speed digital signal processing, custom microcontroller implementation, and ASIC prototyping. Industrial designers frequently use the EP20K600CF1020C8 in 3.3 V backplane designs where its 588 I/Os replace multiple discrete glue-logic devices.
When designing with this part, ensure the PCB accommodates the 1.00 mm BGA pitch and that the multi-voltage I/O banks are powered correctly. Quiescent supply current rises significantly with logic utilization, so thermal dissipation analysis is recommended at >70 % utilization.
Аналоги без доработки для EP20K600CF1020C8 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EP20K600CF1020C8 (тот же форм-фактор и посадочное место) — отличается по Package, Speed Grade, Process Technology, Operating Temperature, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EP20K600CF1020C7
✅ Прямая замена✓ В наличии
$212.4 / шт.
Открыть даташит →EP20K600CB652C8
✅ Прямая замена✓ В наличии
$105 / шт.
Открыть даташит →EP20K600CB652C8N
✅ Прямая замена✓ В наличии
$115 / шт.
Открыть даташит →EP20K600CB672C8
✅ Прямая замена✓ В наличии
$245 / шт.
Открыть даташит →EP20K600CB672C7
✅ Прямая замена✓ В наличии
$182.5 / шт.
Открыть даташит →EP20K600CF1020C8 Максимальные параметры и электрические характеристики
| Family | APEX 20KC |
| Series | EP20K600 |
| Logic Elements / Cells | 24,320 |
| System Gates | 600,000 |
| Embedded Memory (ESB) | 311 Kbit (max) |
| Process Technology | 0.15 µm CMOS |
| Core Supply Voltage | 1.8 V |
| I/O Supply Voltage | 1.8 V / 2.5 V / 3.3 V (MultiVolt) |
| Maximum Internal Frequency | 301.21 MHz (C8 speed grade) |
| User I/O Pins | 588 |
| Dedicated Inputs | 4 |
| Корпус | 1020-ball FC-FBGA (1.00 mm pitch) |
| Рабочая температура | 0 °C to +85 °C (commercial, "C") |
| Speed Grade | C8 |
| Configuration Interface | Serial / JTAG (IEEE 1149.1) |
| PCI Compliance | PCI SIG Local Bus Spec Rev 2.2, 32/64-bit, 33/66 MHz, 3.3 V |
Руководство по цоколевке EP20K600CF1020C8 в корпусе 1020-ball fc-fbga (1.00 mm pitch)
Цоколевка для EP20K600CF1020C8 (корпус 1020-ball fc-fbga (1.00 mm pitch)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EP20K600CF1020C8.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EP20K600CF1020C8 подходит для 6 применениеs: Telecommunications Line Card, ASIC Prototyping Platform, PCI Bus Bridge, Industrial Automation Controller, High-Speed Digital Signal Processing, Custom Microcontroller / Soft-Core CPU.
Telecommunications Line Card
The EP20K600CF1020C8's 588 user I/Os and PCI 2.2 compliance make it well-suited for telecom line cards aggregating T1/E1 or ATM traffic. Its 311 Kbit embedded memory implements per-channel FIFOs without external SRAM, while the 301 MHz internal frequency supports 66 MHz PCI 64-bit system bus bridging with comfortable timing margin.
Рекомендуется
ASIC Prototyping Platform
With 24,320 logic elements and 600 K system gates, the EP20K600CF1020C8 emulates ASICs up to ~500 K gates before partitioning. Its ESBs map cleanly to ASIC SRAM/CAM blocks, and MultiVolt I/O (1.8/2.5/3.3 V) connects directly to legacy ASIC pin voltages, shortening prototype-to-silicon bring-up cycles.
Рекомендуется
PCI Bus Bridge
The EP20K600CF1020C8 is PCI SIG 2.2 compliant for both 32-bit and 64-bit, 33 MHz and 66 MHz operation at 3.3 V. Designers use it as a PCI-to-PCI bridge or custom peripheral controller, leveraging the 588 I/Os to expose multiple PCI segments plus local processor and memory buses on one device.
Рекомендуется
Industrial Automation Controller
Industrial motion-control and PLC platforms benefit from the EP20K600CF1020C8's 588 I/Os, which directly drive hundreds of opto-isolated digital channels. The 1.8 V core plus 3.3 V I/O simplifies interfacing to legacy 5 V-tolerant logic via external buffers, while the 0 °C to +85 °C commercial temperature range suits factory-floor enclosures.
Рекомендуется
High-Speed Digital Signal Processing
The 301 MHz internal frequency of the EP20K600CF1020C8 enables multi-channel FIR filtering and FFT datapaths at sample rates above 100 MSPS. ESBs configured as dual-port RAM store tap coefficients, while the 588 I/Os stream data to external DDR SDRAM or ZBT SRAM at sustained throughput without bus contention.
Рекомендуется
Custom Microcontroller / Soft-Core CPU
The 600 K system gates comfortably host 32-bit soft processors such as Nios, ARM7TDMI, or OpenRISC alongside peripherals. Designers implement UARTs, timers, DMA, and external bus controllers in the EP20K600CF1020C8's logic fabric, using ESBs as register files and cache, while exposing 588 I/Os as GPIO and bus pins.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EP20K600CF1020C8 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EP20K600CF1020C7 | EP20K600CB652C8 | EP20K600CB652C8N | EP20K600CB672C8 | EP20K600CB672C7 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 1020-ball FC-FBGA (1.00 mm pitch) | 1020-ball FC-FBGA (1.00 mm pitch) - same | 652-ball FBGA - smaller | 652-ball FBGA - smaller | 672-ball FBGA - smaller | 672-ball FBGA - smaller |
| Speed Grade | C8 (~301 MHz) | C7 (~260 MHz) | C8 (~301 MHz) | C8 (~301 MHz) | C8 (~301 MHz) | C7 (~260 MHz) |
| User I/O Pins | 588 | 588 | 380 | 380 | 408 | 408 |
| System Gates | 600 K | 600 K | 600 K | 600 K | 600 K | 600 K |
| Logic Elements | 24,320 | 24,320 | 24,320 | 24,320 | 24,320 | 24,320 |
| Embedded Memory (ESB) | 311 Kbit | 311 Kbit | 311 Kbit | 311 Kbit | 311 Kbit | 311 Kbit |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Operating Temperature | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C |
Ключевые отличия
- Largest I/O count in the APEX 20KC family (против EP20K600CB652C8)
- Highest speed grade available in this footprint (против EP20K600CF1020C7)
- Largest embedded memory budget at full I/O (против EP20K600CB672C8)
Заметки по проектированию
The 1020-ball FC-FBGA package uses a 1.00 mm ball pitch. PCB layout requires HDI microvia stack-ups with 0.4 mm via pitch escape routing, plus a continuous ground plane beneath the BGA for return-current integrity. Recommended microvia aspect ratio is 1:1 or smaller for reliable assembly yield.
Core current scales with toggle rate and logic utilisation. At >70 % utilisation the EP20K600CF1020C8 typically draws 1.5-2.5 A on the 1.8 V VCCINT rail, so use a low-dropout regulator with at least 3 A headroom and decouple each VCCINT ball pair with 0.1 µF plus 10 µF bulk ceramic capacitors placed within 5 mm of the package.
The FC-FBGA package relies on PCB thermal conduction rather than a heatsink. At 2 A × 1.8 V ≈ 3.6 W dissipation, ensure the top and inner copper layers connected to GND provide at least 25 cm² of continuous pour. Without this, junction temperature may exceed the 125 °C limit and trigger thermal-shutdown-induced bit corruption during long configuration cycles.
MultiVolt I/O banks must each be powered even if unused, or the unpowered bank draws leakage that prevents configuration. Program all bank VCCIO pins before JTAG configuration. Also, MSEL pins must be tied to the correct logic level to select the configuration mode (Fast Passive Parallel, etc.).
Информация о соответствии
RoHS status, lead-free finish, and halogen-free status were not confirmed by the verified web data; manufacturer datasheet predates many of these disclosures. Cross-reference the device marking or contact Altera/Intel for an authoritative certificate of conformance before consumer-market deployment.
