EP4CE10E22C6 - 10,320-LE Cyclone IV E FPGA | Altera
Артикул: EP4CE10E22C6 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
EP4CE10E22C6 Обзор
An FPGA is a programmable digital semiconductor whose logic and interconnect resources are configured after manufacture. Unlike a fixed-function application-specific integrated circuit, an FPGA can support multiple control, timing, protocol, and arithmetic designs within the limits of its logic, memory, pin, and clock resources. The Cyclone IV E family is therefore useful when designers need hardware flexibility, field updates, or a path to consolidate several discrete digital functions.
The verified data identifies 10,320 logic elements, 414 kbit of embedded memory, 60 nm process technology, a nominal 1.2 V operating supply, and a 144-pin EQFP package. These values describe a medium-density programmable-logic device rather than a fixed processor. Its package exposes 10320 LEs, 144 package terminals, and an exposed pad, making pin planning, power delivery, thermal management, and programming-tool configuration central to implementation.
Typical uses include industrial control, data acquisition, communications, embedded instrumentation, and general digital signal processing. Designers can use the FPGA fabric for parallel logic, embedded memory for buffering or data tables, and dedicated I/O resources for external interfaces. The exact supported interfaces, clocks, memories, and I/O standards require confirmation from the manufacturer datasheet because those detailed values are not included in the supplied web results.
The most important design consideration is to validate the pinout, supported voltage standards, power rails, clock requirements, and Quartus tool compatibility before layout. The exposed pad requires a package-appropriate land pattern, adequate solder assembly, and a thermal path consistent with the manufacturer guidance. Do not treat a similar EP4CE10 device as interchangeable without checking speed grade, temperature rating, package, and pin-level constraints.
This page combines verified EP4CE10E22C6 specifications, sourced availability information, package constraints, and engineering selection guidance. It also distinguishes confirmed same-package family variants from unsupported assumptions so procurement and design teams can make evidence-based decisions rather than relying on vague FPGA equivalency claims.
Аналоги без доработки для EP4CE10E22C6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EP4CE10E22C6 (тот же форм-фактор и посадочное место) — отличается по Package, Process Technology, Embedded Memory, Logic Elements, Speed Grade.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EP4CE10E22C7N
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
EP4CE10E22C8N
✅ Прямая замена✓ В наличии
$11.1 / шт.
Открыть даташит →EP4CE10E22C8N
✅ Прямая замена✓ В наличии
$11.1 / шт.
Открыть даташит →EP4CE10E22C6N
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
EP4CE6E22C8
✅ Прямая замена✓ В наличии
$13.65 / шт.
Открыть даташит →EP4CE30F23C7N
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →EP4CE10E22C6 Максимальные параметры и электрические характеристики
| FPGA Family | Cyclone IV E |
| Logic Elements | 10,320 LE |
| Embedded Memory | 414 kbit |
| Process Technology | 60 nm |
| Nominal Supply Voltage | 1.2 V |
| Package Type | 144-pin EQFP exposed-pad LQFP |
| Package Pin Count | 144 terminals |
| Тип монтажа | Surface mount |
| Product Category | Field Programmable Gate Array (FPGA) |
| Programmability | Reconfigurable digital logic |
| Embedded Memory Capacity | 414 kbit |
| Logic Element Count | 10,320 LE |
| Technology Node | 60 nm |
| Core Supply | 1.2 V |
| Package Family | LQFP-144 exposed pad |
| Manufacturer | Altera |
Руководство по цоколевке EP4CE10E22C6 в корпусе lqfp-144 exposed pad
Цоколевка для EP4CE10E22C6 (корпус lqfp-144 exposed pad). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EP4CE10E22C6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EP4CE10E22C6 подходит для 6 применениеs: Industrial Control Logic, Data Acquisition and Signal Conditioning, Communications Interface Consolidation, Embedded Test and Measurement, Programmable Digital Signal Processing, Embedded System Control Hub.
Industrial Control Logic
The EP4CE10E22C6 fits industrial control designs that need reconfigurable sequencing, state machines, fault handling, and interface logic without committing every function to a fixed ASIC. Its verified 10,320 logic elements provide programmable digital resources, while 414 kbit of embedded memory can support small data buffers or lookup structures. The 144-pin exposed-pad LQFP package gives access to many I/O resources for sensors, actuators, communications, and machine-control signals. Because the supplied data does not specify I/O voltage standards, timing, or environmental ratings, those values must be confirmed before selecting pull-ups, level shifters, and protection networks.
Рекомендуется
Data Acquisition and Signal Conditioning
The EP4CE10E22C6 can implement parallel data acquisition front ends when samples must be captured, buffered, filtered, or transformed in programmable logic. The verified 10,320 logic elements and 414 kbit embedded memory make it appropriate for moderate-width pipelines and control-oriented DSP functions, while the 144-pin package supports multiple external interface signals. Use Quartus constraints to assign converter outputs, clocks, and control lines, and verify acquisition timing against the actual converter latency. The supplied records do not confirm I/O standards or maximum clock rates, so the design must not assume them without the manufacturer documentation.
Рекомендуется
Communications Interface Consolidation
The EP4CE10E22C6 is useful for programmable communication bridges, protocol converters, test interfaces, and multi-clock data-routing systems where a microcontroller or ASIC would be less flexible. Its Cyclone IV E fabric can combine parallel logic and embedded memory, and the 144-pin package provides a substantial but not unlimited I/O budget. Designers should reserve pins for clocks, resets, configuration, transceiver interfaces, and debug access, then confirm timing closure with the target device speed grade. The verified material does not provide PLL, I/O-standard, or maximum-frequency details, so those claims remain reserved for the official datasheet.
Рекомендуется
Embedded Test and Measurement
The EP4CE10E22C6 can serve programmable timing, sequencing, pattern-generation, and measurement-control logic in compact instrumentation. Its 10,320 logic elements allow reusable control paths, while 414 kbit of embedded memory can hold small patterns or sample storage. The exposed-pad LQFP package helps provide numerous connections to converters, relays, digital I/O, and clock sources. Designers should separate sensitive analog references from digital switching regions, provide controlled clock distribution, and use the manufacturer power and decoupling recommendations. The supplied data does not specify measurement accuracy or supported I/O standards, so those specifications must be taken from the device documentation.
Рекомендуется
Programmable Digital Signal Processing
The EP4CE10E22C6 can implement moderate parallel DSP functions such as filters, correlators, counters, packetizers, and custom waveform logic. The Cyclone IV E architecture provides programmable logic and embedded memory, allowing designers to tune data paths after simulation and place buffering logic close to the FPGA. The verified device capacity of 10,320 logic elements and 414 kbit of memory helps define whether a design is feasible, but it does not replace a complete utilization and timing analysis. Confirm multiplier, memory, clock, and I/O assumptions in Quartus and against the exact Altera device data before prototyping.
Рекомендуется
Embedded System Control Hub
The EP4CE10E22C6 can act as a programmable control hub between sensors, memory, communications peripherals, and real-time logic. It is appropriate when a design needs deterministic parallel operations plus post-deployment updates, such as instrumentation, industrial gateways, or custom peripheral controllers. Use the FPGA for time-critical sequencing while a microcontroller handles higher-level supervision, and define ownership of buses and interrupts carefully to prevent contention. The supplied information confirms the FPGA family, resource count, memory, supply, and package, but does not define a recommended companion device list; the examples here are engineering relationships rather than manufacturer-verified reference designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EP4CE10E22C6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EP4CE10E22C7N | EP4CE10E22C8 | EP4CE10E22C8N | EP4CE10E22C6N | EP4CE6E22C8 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 144-pin EQFP exposed-pad LQFP | 144-pin EQFP exposed-pad LQFP | 144-pin EQFP exposed-pad LQFP | 144-pin EQFP exposed-pad LQFP | 144-pin EQFP exposed-pad LQFP | 144-pin EQFP exposed-pad LQFP |
| FPGA Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Package Pin Count | 144 terminals | 144 terminals | 144 terminals | 144 terminals | 144 terminals | 144 terminals |
| Special Features | Reconfigurable FPGA with embedded memory | Cyclone IV E FPGA | Cyclone IV E FPGA | Cyclone IV E FPGA | Cyclone IV E FPGA | Cyclone IV E FPGA |
Ключевые отличия
- Verified 10,320 logic-element resource target (против EP4CE6E22C8)
- Confirmed 414 kbit embedded memory (против EP4CE10E22C7N)
- 144-pin exposed-pad LQFP package identity (против EP4CE10E22C8)
- 1.2 V nominal supply (против EP4CE10E22C8N)
Заметки по проектированию
Use the official Altera power-supply and decoupling guidance for the exact EP4CE10E22C6 speed and temperature grade. The verified data confirms a 1.2 V nominal supply, but it does not provide recommended capacitor values, allowable ripple, current limits, or power-up sequencing. Place required bulk and high-frequency decoupling close to the relevant supply pins, keep return paths short, and verify the complete power tree in the device datasheet and Quartus power-estimation report before release.
The 144-pin EQFP exposed-pad LQFP package requires the package-specific land pattern and exposed-pad connection. Preserve the manufacturer's recommended pad geometry, thermal-via pattern if specified, and copper distribution rather than substituting a generic QFP footprint. Review the exposed-pad net against the pinout and power design, and assess temperature rise using actual utilization, ambient conditions, board copper, and package data. The supplied records do not contain thermal resistance or maximum junction-temperature values, so those must not be inferred.
Assign FPGA pins in Quartus before routing and treat configuration, clocks, resets, differential pairs, and high-speed interfaces as separate constraint classes. Confirm each external component's voltage and timing against the exact supported I/O standard. Leave programming and debug access accessible, maintain the manufacturer's package tolerances, and avoid routing sensitive clocks across programmable-logic regions where possible. A valid schematic symbol alone is insufficient; compare the PCB footprint and pin table to the exact ordering code.
The main substitution pitfall is treating every EP4CE10 suffix as electrically identical. C6, C7, C8, C8N, and C6N references may identify different speed, temperature, package, or ordering attributes. Verify the manufacturer ordering guide, pin definitions, exposed-pad treatment, timing grade, and programming compatibility before using a substitute. Also do not infer RoHS, REACH, lifecycle, lead-time, or pricing compliance from a distributor category page; request current manufacturer or authorized-distributor confirmation.
Информация о соответствии
The supplied verified search results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-mineral status for EP4CE10E22C6. Compliance must be confirmed using the current Altera product documentation or supplier declaration.
