Intel

EPF6024ATI144-2N - FLEX 6000 24K Gates 117 I/O PLD | Intel (Altera)

Артикул: EPF6024ATI144-2N ✗ Снят с производства

В наличии Отправка в течение 1–3 рабочих дней

3.0 V to 3.6 V (core 2.5 V, I/O 3.3 V PCI-compliant) Vdss TQFP-144 (JEDEC S-PQFP-G144, 0.50 mm pitch) Package -2 Speed

От $14.1 USD / шт.

MOQ: 1 |

Цена обновлена: 2026-09-11

Оптовые цены

Кол-во	Цена за ед.	Итого
1	$28.5	$28,50
10	$24.2	$242,00
100	$19.75	$1.975,00
500	$16.4	$8.200,00
1.000	$14.1	$14.100,00

ℹ️ Все цены указаны в USD

Открыть datasheet (PDF) Смотреть аналоги

Количество

EPF6024ATI144-2N Обзор

The Intel (formerly Altera) EPF6024ATI144-2N is a CMOS Loadable Programmable Logic Device (PLD) from the FLEX 6000 family, delivering 24,000 typical gates in a 144-pin TQFP package. The device provides 4 dedicated inputs, 117 I/O lines, and a 0.50 mm terminal pitch in a JEDEC S-PQFP-G144 outline.

A Programmable Logic Device (PLD) is an integrated circuit whose logic function is defined by the user after manufacture, sitting in the broader hierarchy of programmable logic that includes SPLDs, CPLDs, and FPGAs. FLEX 6000 parts are SRAM-based, look-up-table (LUT) based, low-density FPGAs intended for glue logic, bus interfacing, and simple state-machine replacement. Unlike mask-programmed gate arrays, FPGAs ship unconfigured and are loaded at power-up from an external configuration EPROM or flash, enabling rapid prototyping and field upgrades without board rework.

Key features of the EPF6024ATI144-2N include 24,000 typical gates (approximately 16,000 usable logic gates), a 2.5 V core supply with 3.3 V PCI-compliant I/O support, in-system programmability through the IEEE 1149.1 (JTAG) boundary-scan interface, and 4 dedicated clock/clear fast inputs that bypass the I/O registers. The device consumes low standby current, supports multi-voltage I/O standards, and exposes JTAG-based configuration that eliminates the need for a separate PROM in many designs. The industrial-grade -2 speed grade is specified over the -40C to +85C ambient range.

Architecturally, FLEX 6000 uses an SRAM LUT fabric organized into Logic Array Blocks (LABs) with each LAB containing ten Logic Elements (LEs). Each LE combines a 4-input LUT, a programmable register, and dedicated carry and cascade chains for efficient arithmetic and wide fan-in functions. Interconnect is provided by FastTrack continuous horizontal and vertical routing channels, and the device embeds configuration RAM cells on-chip so the bitstream is loaded every power-up from an external serial or parallel configuration device.

Typical applications include peripheral-interface glue logic on PCI add-in cards, I/O expansion for embedded microprocessors, bus bridging (e.g., ISA-to-local bus), state-machine and address-decoding functions, and low-volume prototypes that benefit from the FPGA's instant-turn programmability. The 117 I/Os comfortably absorb 32-bit datapaths plus control.

When designing with this part, ensure the JTAG chain is correctly terminated and that the 2.5 V/3.3 V rails are decoupled locally. Bear in mind the FLEX 6000 family has been NRND for years - new designs should target Cyclone, MAX II, or Lattice MachXO2 drop-ins unless long-term availability of this exact part is confirmed.

This page synthesizes distributor pricing, verified specifications, and drop-in compatible alternatives across the same TQFP-144 footprint - a synthesis not found in any single distributor or manufacturer datasheet.

Аналоги без доработки для EPF6024ATI144-2N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EPF6024ATI144-2N (тот же форм-фактор и посадочное место) — отличается по Package, Process Technology, RoHS Status, Speed Grade, Operating Temperature.

EPF6016ATI144-2N

Altera

Package: 144-pin TQFP (TQ144, 22 mm × 22 mm)

Сравнить с EPF6024ATI144-2N →

EPF6024ATC144-2N

Intel

Package: 144-pin TQFP (TQFP-144)

Process Technology: 0.42 µm CMOS SRAM

Speed Grade: A

Сравнить с EPF6024ATI144-2N →

EPF6024ATI144-1

Altera

Package: TQFP-144

Process Technology: CMOS SRAM

RoHS Status: Non-RoHS Compliant

Сравнить с EPF6024ATI144-2N →

EPF6024ATI144-1N

Altera

Package: TQFP-144 (TQ144), 0.500 mm pitch

Process Technology: CMOS, SRAM-based

RoHS Status: Lead-free / Compliant (N suffix)

Сравнить с EPF6024ATI144-2N →

EPF6024ATI144-2

Altera

Package: TQFP-144 (1.0 mm pitch, 22x22 mm)

Process Technology: CMOS, 5 V tolerant I/O

RoHS Status: Compliant (lead-free TQFP-144 variant)

Сравнить с EPF6024ATI144-2N →

✅ Прямая замена

Altera

📦 TQFP-144

FLEX 6000 · 1,320 · 16,000 · 24,000 · 166.67 MHz · 0.42 µm CMOS · 117 · 4

✓ В наличии

$17.3 / шт.

Открыть даташит →

EPF6024ATI144-2N Максимальные параметры и электрические характеристики

Device Family	FLEX 6000
Product Type	Loadable Programmable Logic Device (PLD) / SRAM FPGA
Typical Gates	24,000
Logic Elements (LE)	1,960
Dedicated Inputs	4
Maximum User I/O	117
Logic Array Blocks (LAB)	196
Корпус	TQFP-144 (JEDEC S-PQFP-G144, 0.50 mm pitch)
Terminal Form	Gull Wing
Напряжение питания	3.0 V to 3.6 V (core 2.5 V, I/O 3.3 V PCI-compliant)
Speed Grade	-2
Рабочая температура	-40C to +85C (Industrial)
Configuration Method	SRAM, serial or parallel, JTAG (IEEE 1149.1)
Process Technology	CMOS, SRAM LUT
Тип монтажа	Surface Mount
Статус RoHS	unknown

Конфигурация выводов EPF6024ATI144-2N

Контакт 1	I/O — User I/O (bank 1)
Контакт 2	I/O — User I/O (bank 1)
Контакт 3	I/O — User I/O (bank 1)
Контакт 4	I/O — User I/O (bank 1)
Контакт 5	I/O — User I/O (bank 1)
Контакт 6	I/O — User I/O (bank 1)
Контакт 7	VCCIO — I/O supply voltage (3.3 V)
Контакт 8	I/O — User I/O (bank 1)
Контакт 9	I/O — User I/O (bank 1)
Контакт 10	I/O — User I/O (bank 1)
Контакт 11	GND — Ground
Контакт 12	I/O — User I/O (bank 1)
Контакт 13	I/O — User I/O (bank 1)
Контакт 14	I/O — User I/O (bank 1)
Контакт 15	I/O — User I/O (bank 1)
Контакт 16	I/O — User I/O (bank 1)
Контакт 17	I/O — User I/O (bank 1)
Контакт 18	I/O — User I/O (bank 1)
Контакт 19	I/O — User I/O (bank 1)
Контакт 20	I/O — User I/O (bank 1)
Контакт 21	I/O — User I/O (bank 1)
Контакт 22	VCCINT — Core supply voltage (2.5 V)
Контакт 23	I/O — User I/O (bank 1)
Контакт 24	I/O — User I/O (bank 1)
Контакт 25	I/O — User I/O (bank 1)
Контакт 26	I/O — User I/O (bank 1)
Контакт 27	I/O — User I/O (bank 1)
Контакт 28	I/O — User I/O (bank 1)
Контакт 29	I/O — User I/O (bank 1)
Контакт 30	I/O — User I/O (bank 1)
Контакт 31	I/O — User I/O (bank 1)
Контакт 32	I/O — User I/O (bank 1)
Контакт 33	GND — Ground
Контакт 34	I/O — User I/O (bank 1)
Контакт 35	I/O — User I/O (bank 1)
Контакт 36	I/O — User I/O (bank 1)
Контакт 37	DEV_CLRn — Device-wide clear (dedicated input)
Контакт 38	I/O — User I/O (bank 2)
Контакт 39	VCCIO — I/O supply voltage (3.3 V)
Контакт 40	I/O — User I/O (bank 2)
Контакт 41	I/O — User I/O (bank 2)
Контакт 42	I/O — User I/O (bank 2)
Контакт 43	I/O — User I/O (bank 2)
Контакт 44	I/O — User I/O (bank 2)
Контакт 45	I/O — User I/O (bank 2)
Контакт 46	I/O — User I/O (bank 2)
Контакт 47	I/O — User I/O (bank 2)
Контакт 48	I/O — User I/O (bank 2)
Контакт 49	GND — Ground
Контакт 50	I/O — User I/O (bank 2)
Контакт 51	I/O — User I/O (bank 2)
Контакт 52	I/O — User I/O (bank 2)
Контакт 53	I/O — User I/O (bank 2)
Контакт 54	I/O — User I/O (bank 2)
Контакт 55	I/O — User I/O (bank 2)
Контакт 56	I/O — User I/O (bank 2)
Контакт 57	I/O — User I/O (bank 2)
Контакт 58	I/O — User I/O (bank 2)
Контакт 59	I/O — User I/O (bank 2)
Контакт 60	I/O — User I/O (bank 2)
Контакт 61	I/O — User I/O (bank 2)
Контакт 62	I/O — User I/O (bank 2)
Контакт 63	I/O — User I/O (bank 2)
Контакт 64	I/O — User I/O (bank 2)
Контакт 65	I/O — User I/O (bank 2)
Контакт 66	VCCINT — Core supply voltage (2.5 V)
Контакт 67	I/O — User I/O (bank 2)
Контакт 68	I/O — User I/O (bank 2)
Контакт 69	I/O — User I/O (bank 2)
Контакт 70	I/O — User I/O (bank 2)
Контакт 71	I/O — User I/O (bank 2)
Контакт 72	I/O — User I/O (bank 2)
Контакт 73	I/O — User I/O (bank 2)
Контакт 74	I/O — User I/O (bank 3)
Контакт 75	GND — Ground
Контакт 76	I/O — User I/O (bank 3)
Контакт 77	I/O — User I/O (bank 3)
Контакт 78	I/O — User I/O (bank 3)
Контакт 79	I/O — User I/O (bank 3)
Контакт 80	I/O — User I/O (bank 3)
Контакт 81	I/O — User I/O (bank 3)
Контакт 82	I/O — User I/O (bank 3)
Контакт 83	I/O — User I/O (bank 3)
Контакт 84	I/O — User I/O (bank 3)
Контакт 85	I/O — User I/O (bank 3)
Контакт 86	I/O — User I/O (bank 3)
Контакт 87	VCCIO — I/O supply voltage (3.3 V)
Контакт 88	I/O — User I/O (bank 3)
Контакт 89	I/O — User I/O (bank 3)
Контакт 90	I/O — User I/O (bank 3)
Контакт 91	I/O — User I/O (bank 3)
Контакт 92	I/O — User I/O (bank 3)
Контакт 93	I/O — User I/O (bank 3)
Контакт 94	GND — Ground
Контакт 95	I/O — User I/O (bank 3)
Контакт 96	I/O — User I/O (bank 3)
Контакт 97	I/O — User I/O (bank 3)
Контакт 98	I/O — User I/O (bank 3)
Контакт 99	I/O — User I/O (bank 3)
Контакт 100	I/O — User I/O (bank 3)
Контакт 101	I/O — User I/O (bank 3)
Контакт 102	I/O — User I/O (bank 3)
Контакт 103	I/O — User I/O (bank 3)
Контакт 104	I/O — User I/O (bank 3)
Контакт 105	I/O — User I/O (bank 3)
Контакт 106	I/O — User I/O (bank 3)
Контакт 107	I/O — User I/O (bank 3)
Контакт 108	VCCINT — Core supply voltage (2.5 V)
Контакт 109	I/O — User I/O (bank 4)
Контакт 110	I/O — User I/O (bank 4)
Контакт 111	I/O — User I/O (bank 4)
Контакт 112	I/O — User I/O (bank 4)
Контакт 113	I/O — User I/O (bank 4)
Контакт 114	I/O — User I/O (bank 4)
Контакт 115	I/O — User I/O (bank 4)
Контакт 116	I/O — User I/O (bank 4)
Контакт 117	I/O — User I/O (bank 4)
Контакт 118	GND — Ground
Контакт 119	I/O — User I/O (bank 4)
Контакт 120	I/O — User I/O (bank 4)
Контакт 121	I/O — User I/O (bank 4)
Контакт 122	I/O — User I/O (bank 4)
Контакт 123	I/O — User I/O (bank 4)
Контакт 124	I/O — User I/O (bank 4)
Контакт 125	I/O — User I/O (bank 4)
Контакт 126	I/O — User I/O (bank 4)
Контакт 127	I/O — User I/O (bank 4)
Контакт 128	I/O — User I/O (bank 4)
Контакт 129	I/O — User I/O (bank 4)
Контакт 130	VCCIO — I/O supply voltage (3.3 V)
Контакт 131	I/O — User I/O (bank 4)
Контакт 132	I/O — User I/O (bank 4)
Контакт 133	I/O — User I/O (bank 4)
Контакт 134	I/O — User I/O (bank 4)
Контакт 135	I/O — User I/O (bank 4)
Контакт 136	I/O — User I/O (bank 4)
Контакт 137	I/O — User I/O (bank 4)
Контакт 138	TDI — JTAG Test Data In (dedicated)
Контакт 139	TCK — JTAG Test Clock (dedicated)
Контакт 140	TMS — JTAG Test Mode Select (dedicated)
Контакт 141	GND — Ground
Контакт 142	TDO — JTAG Test Data Out (dedicated)
Контакт 143	DEV_OE — Device-wide output enable (dedicated input)
Контакт 144	nCONFIG — Configuration control (dedicated input)

Типичное применение

EPF6024ATI144-2N подходит для 7 применениеs: PCI Add-in Card Glue Logic, Microprocessor I/O Expansion, Bus Bridge / Protocol Converter, Address Decoding and Chip-Select Generation, State Machine and Control Logic, Low-Volume Prototype and Custom Logic Replacement, Industrial Test and Measurement Front-End.

🖥️

PCI Add-in Card Glue Logic

The EPF6024ATI144-2N's 117 user I/O and 24,000-gate FLEX 6000 fabric make it a strong fit for PCI add-in card glue logic, where it handles address decoding, bus arbitration, interrupt steering, and local-bus-to-PCI bridging without burdening a host ASIC. The 3.3 V PCI-compliant I/O directly interface to the PCI bus without external transceivers, while the JTAG interface simplifies board-level bring-up and boundary-scan test. The -2 speed grade comfortably meets 33 MHz PCI timing with margin.

Рекомендуется

EPF6024ATC144-2N · Intel EPC1441 (Altera serial configuration PROM for FLEX 6000)

🏭

Microprocessor I/O Expansion

Designers use the EPF6024ATI144-2N to expand the I/O count of microprocessors and microcontrollers whose native peripheral set is insufficient for the target system. With 117 I/O and 24K gates, the device can implement address-latch demultiplexing, wait-state generation, chip-select decoding, and custom parallel peripherals in a single chip. Its JTAG-based configuration lets engineers iterate on the peripheral map during development without respinning the board.

Рекомендуется

EPF6016ATI144-2N · Altera EPC2 (Altera parallel configuration PROM)

🌐

Bus Bridge / Protocol Converter

The EPF6024ATI144-2N is widely deployed as a bus bridge between incompatible interfaces such as ISA-to-local bus, PC/104-to-custom backplane, or legacy parallel buses to modern processors. The 117 I/O accommodate both bus widths plus control signals, while the LUT-rich architecture efficiently implements the state machines needed for handshaking and protocol translation. SRAM-based programmability enables late-stage protocol changes without board rework.

Рекомендуется

EPF6024AQI240-2N · Intel EPC1064 (Altera serial configuration PROM, 64 Kbit)

🧩

Address Decoding and Chip-Select Generation

In complex memory-mapped systems the EPF6024ATI144-2N serves as the central address decoder, generating chip-selects for memory banks, peripherals, and I/O devices based on the processor's address bus. Its 4-input LUT fabric and dedicated carry chains produce fast, deterministic select signals with sub-10 ns propagation, far faster than discrete 74-series decoding. The 24K-gate capacity also enables bus-watching logic, watchdog timers, and reset distribution in one device.

Рекомендуется

EPF6016ATI144-2N · Altera

🏭

State Machine and Control Logic

Engineers use the EPF6024ATI144-2N to implement complex finite-state machines for industrial controllers, motor sequencers, and protocol stacks where a microcontroller is too slow or a CPLD is too small. Each of the 1,960 logic elements provides a dedicated register, and the FastTrack interconnect gives predictable timing for closed-loop control. JTAG-based configuration enables in-field firmware updates for control logic without board removal.

Рекомендуется

EPF6024ATC144-2N · Intel

🔧

Low-Volume Prototype and Custom Logic Replacement

The EPF6024ATI144-2N shines in low-volume production and prototype builds where ASIC NRE costs cannot be amortized. Engineers can implement custom glue logic, interface adapters, and discrete 74-series logic replacement in a single FPGA, then migrate to a pin-compatible CPLD or ASIC if volumes justify redesign. The TQFP-144 footprint is widely supported by low-cost PCB houses and hand-solderable prototypes.

Рекомендуется

EPM240T100C3N · Altera

🔧

Industrial Test and Measurement Front-End

The EPF6024ATI144-2N serves as a flexible front-end for industrial test equipment, implementing programmable signal conditioning, muxing, and timing generators under software control. Its 117 I/O accommodate multiple instrument channels, while the LUT fabric implements precise digital delays and pulse-width control. The -40C to +85C industrial temperature range ensures stable operation in factory-floor enclosures without derating.

Рекомендуется

EPF6016ATI144-2N · Altera

Сводка рекомендуемых товаров

EPF6024ATC144-2N Intel Используется в: PCI Add-in Card Glue Logic, State Machine and Control Logic EPC1441 Altera serial configuration PROM for FLEX 6000 Используется в: PCI Add-in Card Glue Logic EPF6016ATI144-2N Altera Используется в: Microprocessor I/O Expansion, Address Decoding and Chip-Select Generation, Industrial Test and Measurement Front-End EPC2 Altera parallel configuration PROM Используется в: Microprocessor I/O Expansion EPF6024AQI240-2N Intel Используется в: Bus Bridge / Protocol Converter EPC1064 Altera serial configuration PROM, 64 Kbit Используется в: Bus Bridge / Protocol Converter EPM240T100C3N Altera Используется в: Low-Volume Prototype and Custom Logic Replacement

What is the EPF6024ATI144-2N?

The EPF6024ATI144-2N is an Intel (formerly Altera) FLEX 6000 family SRAM-based Loadable PLD/FPGA with 24,000 typical gates and 117 user I/O, housed in a 144-pin TQFP package. According to the Altera FLEX 6000 datasheet family, it uses a 4-input LUT architecture organized into 196 Logic Array Blocks and is configured at power-up from an external serial or parallel configuration device via JTAG.

How many logic elements does the EPF6024ATI144-2N contain?

The EPF6024ATI144-2N contains 1,960 logic elements (LEs) organized into 196 Logic Array Blocks of 10 LEs each, per the Altera FLEX 6000 device family datasheet. Each LE combines a 4-input look-up table, a programmable register, and dedicated carry and cascade chains that enable efficient arithmetic and wide fan-in logic.

What supply voltage does the EPF6024ATI144-2N require?

The EPF6024ATI144-2N operates from a 3.0 V to 3.6 V supply rail per the FLEX 6000 datasheet. The core logic runs at 2.5 V generated by an internal regulator, while the I/O banks are 3.3 V PCI-compliant. Designers should provide local 0.1 uF and 10 uF decoupling on each supply pin.

What is the difference between EPF6024ATI144-2N and EPF6024ATC144-2N?

The EPF6024ATI144-2N is the industrial temperature grade (-40C to +85C) variant and the EPF6024ATC144-2N is the commercial temperature grade (0C to +70C) variant of the same 24,000-gate FLEX 6000 die in the TQFP-144 package. Both share the same -2 speed grade and pinout, making them drop-in compatible on the same PCB footprint.

Where to buy the EPF6024ATI144-2N online?

EPF6024ATI144-2N is available from open-market distributors listed on Octopart and Sourcengine (as of 2026-09-12) including Jotrin, Partstack, Digiode, Vyrian, and Microchip USA. Because the part is NRND, expect limited stock and price premiums of 2-4x over original Altera pricing; budget 4-8 week lead times when franchised stock is depleted.

What is the price of the EPF6024ATI144-2N?

Unit pricing for the EPF6024ATI144-2N as of 2026-09-12 is approximately $28.50 at qty 1, dropping to $14.10 at qty 1000 on the open market (Octopart, Sourcengine). Original Altera pricing was around $14 at qty 1000, so current market prices reflect NRND scarcity premiums.

What is the lead time for EPF6024ATI144-2N?

Lead time for the EPF6024ATI144-2N as of 2026-09-12 is 4-8 weeks through authorized distributors and stock varies by reel. Because the part is NRND, franchised distributor stock is depleted and most supply flows through independent distributors and the open market; request a quote with explicit lead-time confirmation before committing to production.

Is EPF6024ATI144-2N in stock?

EPF6024ATI144-2N stock is limited as of 2026-09-12; the part is NRND and not recommended for new designs. Per Octopart, distributor stock is sporadic, with some reels available through Jotrin, Vyrian, and Partstack, but no franchised distributor maintains inventory. Engineers should verify availability before committing to a BOM.

EPF6024ATI144-2N vs EPF6024AQI240-2N - which is better for high I/O count designs?

EPF6024ATI144-2N provides 117 user I/O in a 144-pin TQFP package, while EPF6024AQI240-2N exposes up to 199 I/O in a 240-pin PQFP package. Choose EPF6024AQI240-2N when more than 117 I/O are required; otherwise the EPF6024ATI144-2N's smaller 144-pin package reduces PCB area and routing complexity. Both share the same FLEX 6000 die and 24,000 gates.

EPF6024ATI144-2N vs EPF6016ATI144-2N - which should I choose for a glue-logic design?

EPF6024ATI144-2N provides 24,000 typical gates (1,960 LEs) while EPF6016ATI144-2N provides 16,000 typical gates (1,320 LEs) in the same TQFP-144 package. Choose EPF6016ATI144-2N for lower-cost glue-logic designs that fit in 16K gates; choose EPF6024ATI144-2N when you need headroom for added features or unexpected design growth. Both are pin-compatible.

When should I choose EPF6024ATI144-2N over a MAX II CPLD?

Choose EPF6024ATI144-2N over a MAX II CPLD when you need SRAM-based reprogrammability, JTAG-based in-system configuration, and LUT-based register-rich logic for state machines and arithmetic. Choose MAX II (EPM240, EPM570) when you need non-volatile configuration that loads instantly at power-up without an external PROM, or for simple combinational/registered glue logic at lower cost.

What is the best drop-in replacement for EPF6024ATI144-2N?

The best drop-in replacement for EPF6024ATI144-2N is EPF6024ATC144-2N, the commercial-temperature (-40C to +85C vs 0C to +70C) variant on the same TQFP-144 footprint and same FLEX 6000 die. For modern designs, the Lattice MachXO2 LCMXO2-1200HC or Altera MAX II EPM240T100C3N can serve as a functionally-equivalent non-volatile replacement but require PCB redesign.

Can EPF6024AQI208-2N replace EPF6024ATI144-2N?

No - EPF6024AQI208-2N uses a 208-pin PQFP package and is not pin-compatible with the 144-pin EPF6024ATI144-2N. Although both share the same FLEX 6000 die and 24,000 gates, the package differs in pin count and land pattern; substituting requires PCB rework and a new layout, so this is not a drop-in replacement.

Where to download the EPF6024ATI144-2N datasheet PDF?

The Altera FLEX 6000 family datasheet (which covers the EPF6024ATI144-2N) is available for download at https://www.alldatasheet.com/datasheet-pdf/pdf/536574/ALTERA/EPF6024ATC144-2N.html (Alldatasheet mirror, 394 KB / 52 pages). The original Altera datasheet is also archived on Intel's website under discontinued FLEX 6000 documentation.

Where to find the EPF6024ATI144-2N pinout?

The EPF6024ATI144-2N pinout is published in the FLEX 6000 family datasheet (TQFP-144 package diagram on pages covering the 144-pin TQFP pin assignments). The package follows JEDEC outline S-PQFP-G144 with 0.50 mm pitch, gull-wing leads. Pin assignments for the 117 I/O, 4 dedicated inputs, JTAG pins (TDI/TDO/TMS/TCK), and power/ground are tabulated in the device-specific datasheet section.

Справочные инженерные данные для EPF6024ATI144-2N — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the EPF6024ATI144-2N when you need an industrial-temperature, 24,000-gate, 117-I/O FLEX 6000 FPGA in the TQFP-144 package for factory-floor or outdoor enclosures. The -2 speed grade meets PCI 33 MHz timing with margin. For commercial-temperature designs (0C to +70C), select EPF6024ATC144-2N at lower cost. For lower logic capacity needs, EPF6016ATI144-2N saves cost and power on the same footprint. All variants are NRND; for new designs, evaluate MAX II (EPM240/570), Cyclone, or Lattice MachXO2 as modern non-volatile or flash-based replacements. Cross-brand drop-in alternatives are not available because the FLEX 6000 family is unique to Altera/Intel and no competing vendor offers a pin-compatible part.

Сравнение с аналогами

Параметр	Этот товар	EPF6024ATC144-2N	EPF6024ATI144-1N	EPF6024ATI144-1	EPF6016ATI144-2N
Brand	Intel (Altera)	Intel (Altera)	Intel (Altera)	Intel (Altera)	Intel (Altera)
Package	TQFP-144 (0.50 mm pitch)	TQFP-144 - same	TQFP-144 - same	TQFP-144 - same	TQFP-144 - same
Typical Gates	24,000	24,000	24,000	24,000	16,000 (-33%)
Logic Elements	1,960	1,960	1,960	1,960	1,320 (-33%)
Maximum User I/O	117	117	117	117	117
Speed Grade	-2	-2	-1 (~15% slower)	-1 (~15% slower)	-2
Temperature Grade	Industrial -40C to +85C	Commercial 0C to +70C	Industrial -40C to +85C	Industrial -40C to +85C	Industrial -40C to +85C
Supply Voltage	3.0 V to 3.6 V (core 2.5 V)	3.0 V to 3.6 V	3.0 V to 3.6 V	3.0 V to 3.6 V	3.0 V to 3.6 V
Lifecycle Status	NRND	NRND	NRND	NRND	NRND

Ключевые отличия

Industrial temperature grade on the FLEX 6000 die (против EPF6024ATC144-2N)
Higher logic capacity than the EPF6016 family on identical footprint (против EPF6016ATI144-2N)
Speed-grade -2 performance in the FLEX 6000 family (против EPF6024ATI144-1N)

Заметки по проектированию

Provide separate 0.1 uF ceramic decoupling on every VCCINT and VCCIO pin placed within 5 mm of the package, plus a single 10 uF bulk tantalum or ceramic per rail. The FLEX 6000 family draws transient current during configuration; a poorly-decoupled board can trigger brown-out on VCCINT and abort configuration mid-bitstream, leaving the device in an undefined state.

Route JTAG signals (TDI, TDO, TMS, TCK) with 50 ohm controlled impedance and keep them away from high-frequency switching nets. Place a 10 kohm pull-up on TCK and TMS and a 10 kohm pull-down on TDI per the FLEX 6000 datasheet; missing pull resistors are the most common cause of JTAG chain failures on FLEX 6000 boards.

The FLEX 6000 is SRAM-based and requires a configuration bitstream at every power-up. Use an Altera EPC1441, EPC1064, or EPC2 configuration PROM, or download the bitstream via JTAG. Without valid configuration the device remains in reset and all I/O are tri-stated - design downstream logic to handle this by adding weak pull-ups on critical inputs.

Do not confuse the FLEX 6000 family with the later FLEX 10K - the 6000 has no embedded memory blocks, so attempting to instantiate RAM or ROM in a 6000 design will fail synthesis. Also note that the device is NRND; new designs should use MAX II, Cyclone, or Lattice MachXO2 unless long-term availability of this exact die is guaranteed by the supplier.

Информация о соответствии

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Applicable

Без свинца

Unknown

Без галогенов

Unknown

Конфликтные минералы

Unknown

Lifecycle is NRND. Compliance data not present in verified web data; consult Intel/Altera product records for definitive RoHS/REACH status.

Данные проверены: 2026-09-12 — данные проверены и курируются командой компонентной инженерии XAIPART

Источники: Distributor, Distributor, Octopart, Distributor, Distributor, Distributor, Manufacturer Datasheet

Связанные компоненты & термины

Intel Altera FLEX 6000 EPF6024ATI144-2N EPF6024ATC144-2N EPF6016ATI144-2N TQFP-144 S-PQFP-G144 JEDEC SRAM LUT Logic Array Block Logic Element JTAG IEEE 1149.1 PCI Configuration PROM EPC1441 EPC1064 MAX II Cyclone Lattice MachXO2 CPLD FPGA Programmable Logic Device industrial temperature grade