EPM5192GC1 - MAX 5000 CPLD 192-Macrocell 62.5MHz 5V | Altera
Артикул: EPM5192GC1 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $45 | $45,00 |
| 10 | $39.5 | $395,00 |
| 100 | $33.75 | $3.375,00 |
| 500 | $28.9 | $14.450,00 |
| 1.000 | $24.5 | $24.500,00 |
EPM5192GC1 Обзор
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell arrays on a single chip with a programmable interconnect network. Within the broader programmable logic hierarchy, a CPLD sits below an FPGA (Field-Programmable Gate Array) and above simple SPLDs, offering deterministic pin-to-pin timing (typically 10-15 ns propagation delay), instant-on operation from on-chip EEPROM/EPROM, and high fan-in/fan-out capability. The MAX 5000 family is Altera's classic second-generation CPLD line, sharing architectural heritage with the earlier MAX 7000 series.
Key features of the EPM5192GC1 include 192 macrocells organized into logic array blocks (LABs), 100% connectivity with predictable interconnect delays, programmable power-saving mode per macrocell, and a 5V VCC supply rail that simplifies integration with TTL/CMOS legacy designs. The device is offered in a ceramic PGA (Pin Grid Array) package, denoted by the GC1 suffix, which supports high-reliability military and aerospace screening.
Architecturally, the EPM5192GC1 employs an EPROM-based configuration cell, allowing the device to be programmed once and retain logic in the absence of power. Each macrocell contains a programmable AND/OR array followed by a configurable flip-flop with selectable clear, preset, and clock options. The interconnect matrix is continuous across the chip, eliminating the need for manual routing iteration.
Typical applications include legacy bus-interface bridges (ISA, VME, and PCI-5V), address decoding and chip-select generation in 5V microcontroller systems, industrial control boards requiring instant-on logic, telecom backplane glue logic, and aerospace/military systems that demand PGA hermetic packaging. The ceramic GC1 package is specifically designed for environments requiring extended temperature range and mechanical robustness.
When designing with this part, note that the EPROM cell cannot be re-programmed in-circuit; design changes require a UV eraser (windowed package) or device replacement. Designers should also verify timing closure using the Altera MAX+PLUS II toolchain, which remains the legacy development environment for this family.
This page synthesizes distributor pricing for the EPM5192GC1, drop-in MAX 5000 family alternatives sourced from XAIPART's internal database, and practical design notes for legacy 5V CPLD systems not consolidated in the original datasheet.
Аналоги без доработки для EPM5192GC1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPM5192GC1 (тот же форм-фактор и посадочное место) — отличается по Package, Supply Voltage (VCC), Device Type, Mounting Type, Process Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPM5192GC-1
✅ Прямая замена✓ В наличии
$17.85 / шт.
Открыть даташит →EPM5192GC-1
✅ Прямая замена✓ В наличии
$17.85 / шт.
Открыть даташит →EPM5192GC-2
✅ Прямая замена✓ В наличии
$92 / шт.
Открыть даташит →EPM5192AJC-15
✅ Прямая замена✓ В наличии
$9.85 / шт.
Открыть даташит →EPM5192AGC
✅ Прямая замена✓ В наличии
$56 / шт.
Открыть даташит →EPM5192GC1 Максимальные параметры и электрические характеристики
| Family | MAX 5000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 192 |
| Usable Gates | 3,750 |
| Maximum Operating Frequency | 62.5 MHz |
| Supply Voltage (VCC) | 5 V |
| Programming Technology | UV-Erasable / OTP EPROM |
| Package Type | Ceramic PGA (Pin Grid Array) |
| Logic Elements | 192 macrocells with AND/OR array |
| Process Technology | EPROM-based CMOS |
| Тип монтажа | Through-hole (PGA) |
| Статус RoHS | unknown |
| Development Tool | Altera MAX+PLUS II |
Руководство по цоколевке EPM5192GC1 в корпусе ceramic pga (pin grid array)
Цоколевка для EPM5192GC1 (корпус ceramic pga (pin grid array)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EPM5192GC1.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EPM5192GC1 подходит для 6 применениеs: Legacy 5V Bus Interface Bridge, Address Decoding and Chip-Select Generation, Industrial Control and Factory Automation, Telecom Backplane Glue Logic, Military and Aerospace Systems, Test and Measurement Instrumentation.
Legacy 5V Bus Interface Bridge
The EPM5192GC1 fits legacy 5V bus-bridge designs (ISA, VME, PCI-5V) by providing 192 macrocells of deterministic pin-to-pin logic with 62.5 MHz toggle capability. Its 5V VCC rail matches the TTL/CMOS logic levels of these buses without level-translation overhead, and the EPROM-based instant-on behavior eliminates the configuration-time delay that FPGA-based bridges exhibit. Designers typically instantiate chip-select decoders, wait-state generators, and byte-swapping muxes in a single device, replacing dozens of 74-series TTL packages. The ceramic PGA package is socket-compatible for field-replaceable units.
Рекомендуется
Address Decoding and Chip-Select Generation
The EPM5192GC1's 192 macrocells are well-matched to wide-address decoding tasks in 5V microcontroller and microprocessor systems. With 3,750 usable gates, a single device can replace the equivalent of 15-20 standard PAL/GAL devices, decoding 24-32 address lines into dozens of chip-select outputs with sub-15 ns propagation delay. The deterministic interconnect network guarantees consistent timing across all decoded outputs, which is critical for synchronous-memory and DMA control logic where skew would cause bus contention.
Рекомендуется
Industrial Control and Factory Automation
In 5V industrial control boards, the EPM5192GC1 implements PLC-style state machines, encoder counters, and pulse-train decoders with predictable timing. Its EPROM-based configuration ensures the device powers up in a known valid state - essential for safety interlocks where misconfiguration on cold-boot could create a hazardous condition. The 62.5 MHz toggle rate accommodates 1-2 MHz quadrature encoder inputs with substantial margin. The ceramic PGA package withstands industrial vibration and thermal-cycling environments better than plastic QFP alternatives.
Рекомендуется
Telecom Backplane Glue Logic
Telecom backplanes built on 5V TTL/CMOS infrastructure use the EPM5192GC1 to consolidate framing, alarm-monitoring, and clock-distribution glue logic. The device's 192 macrocells can host multiple small state machines simultaneously, each running independently with deterministic timing - ideal for multi-channel alarm scanners and protocol-format converters. The wide fan-in (up to 36 inputs per macrocell in MAX 5000 LABs) eliminates external gating, while the 5V supply rail interfaces directly to legacy backplane drivers without voltage translation.
Рекомендуется
Military and Aerospace Systems
The EPM5192GC1's ceramic PGA package is specifically targeted at military and aerospace applications requiring hermetic sealing, extended temperature operation, and resistance to mechanical shock/vibration. Its EPROM-based non-volatile configuration means no configuration-PROM or boot-FPGA chain is needed, simplifying system architecture and reducing failure modes. Typical uses include flight-control interface logic, avionics bus bridges (MIL-STD-1553, ARINC 429 glue), and radar signal-conditioning front-ends. Altera's MAX 5000 family has decades of documented reliability in these environments.
Рекомендуется
Test and Measurement Instrumentation
Bench-top and ATE test equipment uses the EPM5192GC1 to generate stimulus waveforms, sequence test patterns, and interface to legacy GPIB/IEEE-488 instrumentation buses. The device's deterministic timing allows precise pulse-width and timing-edge generation down to the 10-15 ns range, which is essential for digital-pattern generation in production test. Its instant-on EPROM configuration makes it suitable for unattended test stations that must boot into a known state after power interruption. The 5V supply rail also simplifies integration with 5V CMOS test fixtures.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPM5192GC1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPM5192GC-1 | EPM5192GC | EPM5192GC-2 | EPM5192AJC | EPM5192AGC |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | Ceramic PGA | Ceramic PGA - same | Ceramic PGA - same | Ceramic PGA - same | Plastic PGA - same pinout | Ceramic PGA - same |
| Macro Cells | 192 | 192 | 192 | 192 | 192 | 192 |
| Usable Gates | 3,750 | 3,750 | 3,750 | 3,750 | 3,750 | 3,750 |
| Maximum Frequency | 62.5 MHz | 62.5 MHz | 62.5 MHz (commercial) | Lower fmax (slower bin) | 62.5 MHz | 62.5 MHz (different speed bin) |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Technology | UV-Erasable / OTP EPROM | UV-Erasable / OTP EPROM | UV-Erasable / OTP EPROM | UV-Erasable / OTP EPROM | UV-Erasable / OTP EPROM | UV-Erasable / OTP EPROM |
| Screening Grade | Military / Hermetic | Military / Hermetic | Commercial | Military / Hermetic | Commercial / Plastic | Industrial / Hermetic |
Ключевые отличия
- Military-grade ceramic PGA screening (против EPM5192AJC (plastic PGA))
- Single-chip 192-macrocell density (против EPM5128GC (128 macrocells))
- True drop-in compatibility with full MAX 5000 family (против EPM5192GC-2 (slower speed grade))
Заметки по проектированию
The EPM5192GC1 requires a stable 5V VCC supply with the decoupling network specified in the Altera MAX 5000 datasheet. Place one 0.1 microfarad ceramic decoupling capacitor close to every VCC pin, plus a single 10 microfarad tantalum bulk capacitor at the device supply entry. EPROM-based CPLDs draw in-rush current during initial power-on configuration, so the regulator must supply at least 200 percent of the steady-state Icc. Estimated: with 192 macrocells switching at 25 MHz, steady-state Icc is approximately 200-300 mA.
The ceramic PGA footprint requires through-hole PCB mounting, ideally with a PGA socket to allow device replacement during development and field service. Allocate at least 200 mils of clearance around the PGA perimeter for socket retention clips. For socketed designs, route all signal traces on inner PCB layers with the PGA socket on the top side; this minimizes stub length and signal-integrity issues at 62.5 MHz toggle rates. Match trace lengths within a bus to within 500 mils to avoid skew-induced timing errors.
Do not assume any cross-brand drop-in replacement exists for the EPM5192GC1 - the MAX 5000 architecture is proprietary to Altera (now Intel FPGA). Designers planning modern replacements should evaluate MAX II or MAX V CPLDs only after accepting that a PCB redesign may be required. Also note that the EPROM cell is one-time-programmable; logic errors discovered in production require physical device replacement. For prototypes, order the windowed ceramic PGA variant to allow UV erasure and re-programming.
The ceramic PGA package provides excellent thermal performance for legacy 5V designs. Estimated: at full 192-macrocell utilization switching at 50 MHz with 50 percent toggle rate, the EPM5192GC1 dissipates approximately 0.8-1.2 W. The ceramic PGA's thermal resistance (theta_JA) is typically 25-30 C/W in still air, yielding a junction-to-ambient rise of 20-35 C above ambient - well within the device's operating-temperature envelope. Forced-air cooling is not required for typical 5V applications.
Информация о соответствии
Compliance status not documented in the verified MAX 5000 datasheet. The ceramic PGA package and 5V EPROM process suggest a pre-RoHS design; consult Altera/Intel FPGA support for the official compliance statement before using in RoHS-mandated applications.
