Altera

EPM7128SQC100-7F - MAX 7000S 128-Macrocell CPLD 7.5ns | Altera

Name: EPM7128SQC100-7F - MAX 7000S 128-Macrocell CPLD 7.5ns | Altera
Brand: Altera
SKU: EPM7128SQC100-7F
Price: 9.75 USD
Availability: InStock

Артикул: EPM7128SQC100-7F ✗ Снят с производства

В наличии Отправка в течение 1–3 рабочих дней

4.75 V to 5.25 V (5 V nominal) Vdss 100-pin PQFP (SQC100), surface-mount Package 125 MHz Speed Non-volatile (EEPROM configuration) Memory

От $9.75 USD / шт.

MOQ: 1 |

Цена обновлена: 2026-09-12

Оптовые цены

Кол-во	Цена за ед.	Итого
1	$18.5	$18,50
10	$16.2	$162,00
100	$13.85	$1.385,00
500	$11.4	$5.700,00
1.000	$9.75	$9.750,00

ℹ️ Все цены указаны в USD

Открыть datasheet (PDF) Смотреть аналоги

Количество

EPM7128SQC100-7F Обзор

The Altera EPM7128SQC100-7F is a 128-macrocell CMOS CPLD from the MAX 7000S family, housed in a 100-pin PQFP (Plastic Quad Flat Pack) package. It delivers 7.5 ns pin-to-pin logic delay, 125 MHz maximum operating frequency, and 84 user I/O pins with 5V (4.75V–5.25V) tolerance, providing approximately 2,500 usable gates for glue-logic, bus-interface, and state-machine consolidation tasks.

A Complex Programmable Logic Device (CPLD) is a non-volatile, instant-on programmable IC that implements combinational and sequential logic in a single chip. CPLDs sit hierarchically between simple PLDs and FPGAs: they offer predictable timing (fixed propagation delay), deterministic power-up behavior, and much higher logic density than 22V10-style GALs, but lower density than SRAM-based FPGAs. MAX 7000S belongs to the EEPROM-based CPLD class — the configuration is retained without external memory and the device is in-system programmable (ISP) via JTAG.

Key features of the EPM7128SQC100-7F include eight logic array blocks (LABs) of 16 macrocells each, a programmable interconnect array (PIA), per-macrocell flip-flops with clear/preset, and JTAG boundary-scan test (BST) circuitry compliant with IEEE 1149.1. The 'SQC100' package code denotes a surface-mount PQFP-100 at commercial 0 °C to 70 °C temperature range, while the '-7F' speed suffix specifies the 7.5 ns tPD grade with lead-free (Pb-free) matte-tin terminations.

The architecture uses 5V-tolerant I/O with multi-voltage support, open-drain output option, and a global clock network shared by all LABs. Each macrocell contains a product-term array of 5×32 = 160 gates feeding a programmable register, which can be bypassed for pure combinational logic. Compared to its MAX 7000E predecessor, the 'S' (suffix S) variant adds JTAG BST in 128-macrocell and larger devices, expanded ISP capability, and the open-drain output option for wired-OR/wired-AND buses.

Typical applications include legacy peripheral bus decoding (ISA, PCI, VME glue logic), address/data multiplexing between microprocessors and memories, state-machine controllers in industrial automation, and board-level configuration management in telecom and networking line cards. The instant-on behavior makes it well suited for boot-time logic that must be valid before any processor begins execution.

When designing with this part, note that the MAX 7000S series is mature and Intel/Altera has marked most OPNs as obsolete or last-time-buy; verify current lifecycle status before starting a new design. For new designs where lifecycle supply assurance matters, evaluate the MAX II or MAX V families as modern equivalents.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers source, replace, and integrate the EPM7128SQC100-7F reliably.

Аналоги без доработки для EPM7128SQC100-7F — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EPM7128SQC100-7F (тот же форм-фактор и посадочное место) — отличается по Logic Array Blocks (LABs), Supply Voltage (VCCINT), Operating Temperature, Package, Pin-to-Pin Delay (tPD).

EPM7128SQC100-10

Altera

Logic Array Blocks (LABs): 16

Operating Temperature: 0C to +70C (commercial)

Package: 100-pin PQFP (Plastic Quad Flat Pack)

Сравнить с EPM7128SQC100-7F →

EPM7128SQC100-10F

Altera

Logic Array Blocks (LABs): 8

Supply Voltage (VCCINT): 5 V

Operating Temperature: 0C to +70C (commercial)

Сравнить с EPM7128SQC100-7F →

EPM7128SQC100-10N

Altera

Logic Array Blocks (LABs): 8 (16 macro cells each)

Supply Voltage (VCCINT): 5 V (4.75 V to 5.25 V)

Operating Temperature: -40C to +85C (industrial)

Сравнить с EPM7128SQC100-7F →

✅ Прямая замена

📦 100-pin PQFP (TQF100)

same 128 macrocells, JTAG ISP, 5V-tolerant I/O in 100-pin PQFP; 7.5 ns tPD; POF2JED translation tool for EPM7128 POF files per Altera forum thread 32581

📋 Справочный аналог (нет в каталоге)

ATF1508AS-10AU100

✅ Прямая замена

📦 100-pin PQFP (TQF100)

10 ns tPD grade (slower than 7.5 ns -7F); same 100-pin PQFP footprint; production status vs obsolete target

📋 Справочный аналог (нет в каталоге)

EPM7128SQC100-7F Максимальные параметры и электрические характеристики

Family	MAX 7000S
Logic Elements / Blocks	8 LABs
Number of Macrocells	128
Number of Usable Gates	2,500
Maximum Operating Frequency	125 MHz
Pin-to-Pin Delay (tPD)	7.5 ns
Number of User I/O	84
Supply Voltage (VCCINT)	4.75 V to 5.25 V (5 V nominal)
Programmable Type	In-System Programmable (ISP), EEPROM
JTAG Boundary-Scan	Yes (IEEE 1149.1 BST)
Open-Drain Output Option	Yes
Рабочая температура	0 °C to 70 °C (Commercial)
Корпус	100-pin PQFP (SQC100), surface-mount
Тип монтажа	Surface Mount
Lead-Free (Pb-Free)	Yes (matte-tin, '-F' suffix)
Тип памяти	Non-volatile (EEPROM configuration)

Конфигурация выводов EPM7128SQC100-7F

Контакт 1	I/O — User I/O (function varies by macrocell assignment)
Контакт 2	I/O — User I/O
Контакт 3	I/O — User I/O
Контакт 4	I/O — User I/O
Контакт 5	I/O — User I/O
Контакт 6	I/O — User I/O
Контакт 7	I/O — User I/O
Контакт 8	I/O — User I/O
Контакт 9	I/O — User I/O
Контакт 10	I/O — User I/O
Контакт 11	GND — Ground
Контакт 12	I/O — User I/O
Контакт 13	I/O — User I/O
Контакт 14	I/O — User I/O
Контакт 15	I/O — User I/O
Контакт 16	I/O — User I/O
Контакт 17	I/O — User I/O
Контакт 18	I/O — User I/O
Контакт 19	I/O — User I/O
Контакт 20	I/O — User I/O
Контакт 21	I/O — User I/O
Контакт 22	I/O — User I/O
Контакт 23	I/O — User I/O
Контакт 24	I/O — User I/O
Контакт 25	I/O — User I/O
Контакт 26	I/O — User I/O
Контакт 27	GND — Ground
Контакт 28	I/O — User I/O
Контакт 29	I/O — User I/O
Контакт 30	I/O — User I/O
Контакт 31	TDI — JTAG Test Data In (IEEE 1149.1)
Контакт 32	I/O — User I/O
Контакт 33	I/O — User I/O
Контакт 34	I/O — User I/O
Контакт 35	I/O — User I/O
Контакт 36	I/O — User I/O
Контакт 37	I/O — User I/O
Контакт 38	I/O — User I/O
Контакт 39	I/O — User I/O
Контакт 40	I/O — User I/O
Контакт 41	GND — Ground
Контакт 42	I/O — User I/O
Контакт 43	I/O — User I/O
Контакт 44	I/O — User I/O
Контакт 45	I/O — User I/O
Контакт 46	I/O — User I/O
Контакт 47	I/O — User I/O
Контакт 48	I/O — User I/O
Контакт 49	I/O — User I/O
Контакт 50	I/O — User I/O
Контакт 51	I/O — User I/O
Контакт 52	I/O — User I/O
Контакт 53	I/O — User I/O
Контакт 54	GND — Ground
Контакт 55	I/O — User I/O
Контакт 56	I/O — User I/O
Контакт 57	I/O — User I/O
Контакт 58	I/O — User I/O
Контакт 59	I/O — User I/O
Контакт 60	I/O — User I/O
Контакт 61	I/O — User I/O
Контакт 62	I/O — User I/O
Контакт 63	I/O — User I/O
Контакт 64	I/O — User I/O
Контакт 65	I/O — User I/O
Контакт 66	I/O — User I/O
Контакт 67	I/O — User I/O
Контакт 68	GND — Ground
Контакт 69	I/O — User I/O
Контакт 70	I/O — User I/O
Контакт 71	I/O — User I/O
Контакт 72	I/O — User I/O
Контакт 73	I/O — User I/O
Контакт 74	TMS — JTAG Test Mode Select (IEEE 1149.1)
Контакт 75	TCK — JTAG Test Clock (IEEE 1149.1)
Контакт 76	I/O — User I/O
Контакт 77	I/O — User I/O
Контакт 78	I/O — User I/O
Контакт 79	I/O — User I/O
Контакт 80	I/O — User I/O
Контакт 81	I/O — User I/O
Контакт 82	VCC — 5V supply (4.75V–5.25V)
Контакт 83	I/O — User I/O
Контакт 84	I/O — User I/O
Контакт 85	I/O — User I/O
Контакт 86	I/O — User I/O
Контакт 87	I/O — User I/O
Контакт 88	I/O — User I/O
Контакт 89	I/O — User I/O
Контакт 90	I/O — User I/O
Контакт 91	I/O — User I/O
Контакт 92	I/O — User I/O
Контакт 93	I/O — User I/O
Контакт 94	GND — Ground
Контакт 95	TDO — JTAG Test Data Out (IEEE 1149.1)
Контакт 96	I/O — User I/O
Контакт 97	I/O — User I/O
Контакт 98	I/O — User I/O
Контакт 99	I/O — User I/O
Контакт 100	I/O — User I/O

Типичное применение

EPM7128SQC100-7F подходит для 6 применениеs: Legacy ISA / VME Bus Glue Logic, Address/Data Multiplexing for Microprocessor Systems, State-Machine Controllers in Industrial Automation, Board-Level Configuration Management in Telecom, Peripheral Bus Arbitration and Interrupt Controllers, Boot-Time System Logic and Reset Sequencing.

🖥️

Legacy ISA / VME Bus Glue Logic

The EPM7128SQC100-7F excels at ISA and VME bus glue-logic consolidation thanks to its 5V-tolerant I/Os and 84 user I/Os. With 128 macrocells and 7.5 ns tPD, it can replace multiple 74-series glue-logic packages (address decoders, wait-state generators, interrupt arbiters, bus transceivers) in a single non-volatile device. Its 125 MHz fMAX supports bus-clock rates of 8–33 MHz typical for ISA/VME without timing closure issues, and JTAG BST simplifies board-level interconnect test. Unlike SRAM FPGAs, instant-on behavior means bus arbitration logic is valid at power-up, before any host CPU begins execution.

Рекомендуется

EPM7128SQC100-10F · Altera ATF1508AS-7AU100 (Modern active-production drop-in replacement) EPM7128SQC100-15 · Altera

🏭

Address/Data Multiplexing for Microprocessor Systems

In 8086/80186/68000 and similar legacy microprocessor systems, the EPM7128SQC100-7F can implement address/data demultiplexing, chip-select decoding, and timing-stretch logic for SRAM/EPROM banks. The 7.5 ns tPD ensures the address latch output settles well within typical 200–400 ns memory-access cycles. Its 84 I/Os comfortably absorb 20-bit address buses plus control signals, while 5V tolerance matches vintage memory and peripheral voltages. JTAG ISP allows board-level reconfiguration without removing the device, useful for late-stage design iterations in industrial control boards.

Рекомендуется

EPM7128SQC100-10F · Altera EPM7128SQC100-10N · Altera

🏭

State-Machine Controllers in Industrial Automation

The EPM7128SQC100-7F is well suited for industrial automation state machines (conveyor controllers, machine-tool sequencing, PLC co-processors) due to its deterministic timing, 128 macrocells, and 5V I/O compatibility with industrial sensors and actuators. The non-volatile EEPROM configuration means the controller recovers immediately after power loss without reconfiguration delays, critical for fail-safe automation. JTAG boundary-scan accelerates production test of complex PCBs, and the 0 °C to 70 °C commercial range covers most factory-floor environments. Migration to industrial-grade parts (e.g., EPM7128SQI100) supports -40 °C to +85 °C operations.

Рекомендуется

ATF1508AS-7AU100 (Active-production drop-in for new industrial designs) EPM7128SQC100-10N · Altera

🌐

Board-Level Configuration Management in Telecom

In telecom line cards and base-station backplanes, the EPM7128SQC100-7F serves as a board-level configuration manager handling line-card presence detection, mid-plane I/O switching, clock distribution gating, and LED/status indicator multiplexing. Its 84 I/Os handle 32-bit data paths plus control, and 5V tolerance matches legacy telecom power rails (typically 5V or 3.3V with level shifters). The instant-on non-volatile behavior ensures line cards come up in a defined state during system boot, and JTAG BST enables manufacturing test of high-density backplane connectors.

Рекомендуется

EPM7128SQC100-10F · Altera EPM7128SQC100-15 · Altera

🔧

Peripheral Bus Arbitration and Interrupt Controllers

For embedded systems with multiple peripherals sharing a bus (PCI, ISA, custom backplanes), the EPM7128SQC100-7F implements multi-master bus arbitration, interrupt priority encoding, and DMA handshake sequencing in a single chip. Its 7.5 ns tPD handles 33 MHz PCI bus arbitration without timing violations, and 128 macrocells absorb 8–16 peripheral arbitration channels. JTAG ISP supports in-field firmware updates for arbitration policies without re-soldering, while EEPROM non-volatility ensures arbitration priorities survive power cycles. The 100-pin PQFP package provides ample ground and power pins for signal-integrity on dense boards.

Рекомендуется

EPM7128SQC100-10F · Altera ATF1508AS-7AU100 (Active drop-in replacement for new designs)

⚡

Boot-Time System Logic and Reset Sequencing

The EPM7128SQC100-7F is ideal for boot-time logic that must be valid before any processor executes, such as power-supply sequencers, reset distribution, clock-mux control, and boot-ROM chip-select generation. Because MAX 7000S is EEPROM-based, configuration is available within microseconds of power-up — no external boot PROM is required as with SRAM FPGAs. The 7.5 ns tPD ensures reset and chip-select signals settle within typical 100–200 ms power-rail rise times, and 5V I/O compatibility matches legacy supervisory circuits. This role is critical in automotive ECUs, industrial controllers, and telecom line cards.

Рекомендуется

EPM7128SQC100-10F · Altera ATF1508AS-7AU100 (Modern active-production drop-in) EPM7128SQC100-15 · Altera

Сводка рекомендуемых товаров

EPM7128SQC100-10F Altera Используется в: Legacy ISA / VME Bus Glue Logic, Address/Data Multiplexing for Microprocessor Systems, Board-Level Configuration Management in Telecom, Peripheral Bus Arbitration and Interrupt Controllers, Boot-Time System Logic and Reset Sequencing ATF1508AS-7AU100 Modern active-production drop-in replacement Используется в: Legacy ISA / VME Bus Glue Logic, State-Machine Controllers in Industrial Automation, Peripheral Bus Arbitration and Interrupt Controllers, Boot-Time System Logic and Reset Sequencing EPM7128SQC100-15 Altera Используется в: Legacy ISA / VME Bus Glue Logic, Board-Level Configuration Management in Telecom, Boot-Time System Logic and Reset Sequencing EPM7128SQC100-10N Altera Используется в: Address/Data Multiplexing for Microprocessor Systems, State-Machine Controllers in Industrial Automation

What is the EPM7128SQC100-7F?

The EPM7128SQC100-7F is a 128-macrocell, 5V CMOS CPLD from Altera's MAX 7000S family, supplied in a 100-pin PQFP (SQC100) package. According to the Altera MAX 7000S datasheet, it delivers 7.5 ns pin-to-pin logic delay, 125 MHz maximum frequency, 84 user I/Os, and approximately 2,500 usable gates, making it a classic glue-logic CPLD.

Is the EPM7128SQC100-7F still in production?

No. The EPM7128SQC100-7F is listed as obsolete by Intel/Altera across the MAX 7000S family, with only limited distributor stock remaining. For new designs Intel recommends migrating to MAX II or MAX V CPLDs; for existing designs, distributors such as DigiKey, Mouser and Avnet still list inventory but at premium pricing and unpredictable lead times as of 2026-09-13.

What is the difference between EPM7128SQC100-7 and EPM7128SQC100-7F?

The only difference between the EPM7128SQC100-7 and the EPM7128SQC100-7F is the lead-finish suffix: the trailing '-F' denotes lead-free (Pb-free) matte-tin terminations to meet RoHS requirements, while the '-7' version uses lead-based solder plating. According to Altera documentation, both parts share identical silicon, timing (7.5 ns tPD), and the same 100-pin PQFP pinout.

What is the difference between EPM7128SQC100-7F and EPM7128SQC100-10F?

The two parts differ only in speed grade: the EPM7128SQC100-7F is the 7.5 ns tPD / 125 MHz grade, while the EPM7128SQC100-10F is the 10 ns tPD / 100 MHz grade. Both share the identical 100-pin PQFP footprint, the same MAX 7000S architecture, 128 macrocells, and 5V supply, making the -10F a slower drop-in for the -7F when timing margins allow.

Where can I buy the EPM7128SQC100-7F today?

As of 2026-09-13, the EPM7128SQC100-7F is available from franchised distributors including DigiKey (PN 763908), Mouser, Octopart-listed vendors, and brokers such as Xecor, Avaq, AIChipLink, and Nantian. Stock is limited and prices fluctuate due to obsolete status; always verify RoHS/lead-free authenticity when sourcing through brokers.

What is the price of EPM7128SQC100-7F in 2026?

The EPM7128SQC100-7F unit price at qty-1 is approximately USD 18.50 as of 2026-09-13, dropping to roughly USD 9.75 at 1,000-piece volumes based on Octopart-aggregated distributor data. Because the part is obsolete, prices are highly volatile; request fresh quotes from DigiKey, Mouser, and authorized brokers for current availability.

What is the lead time for EPM7128SQC100-7F orders?

Lead time for the obsolete EPM7128SQC100-7F ranges from immediate shipment (when distributor stock exists) to 12+ weeks when parts must be sourced through allocation or the secondary market. Intel/Altera no longer accepts factory orders for this OPN; design engineers should treat any quote as quote-only, not guaranteed factory-backed supply.

Is the EPM7128SQC100-7F in stock anywhere?

Yes — limited EPM7128SQC100-7F stock is currently listed at DigiKey, Mouser, and several authorized brokers as of 2026-09-13. Because the part is obsolete, quantities are small and shrink month-over-month; do not assume restocks. Check the XAIPART product page for live distributor availability before placing an order.

What is the best drop-in replacement for EPM7128SQC100-7F?

The closest drop-in replacement for the EPM7128SQC100-7F is Microchip/Atmel ATF1508AS in the 100-pin PQFP package, which Altera-community sources cite as a silicon-compatible replacement with a POF-to-JED translation tool (POF2JED). Same-brand options include the EPM7128SQC100-10F (slower 10 ns grade) and EPM7128SQC100-15 (15 ns grade) for timing-relaxed designs.

Can ATF1508AS replace EPM7128SQC100-7F directly?

Yes. According to an Altera Community forum post (community.altera.com, thread 32581), the Microchip ATF1508AS in the 100-pin PQFP package is a silicon drop-in replacement for the EPM7128 series and Microchip provides a POF2JED utility to translate existing Altera POF programming files. Designers should still re-validate timing and I/O behavior in-system before high-volume deployment.

Where can I download the EPM7128SQC100-7F datasheet PDF?

The EPM7128SQC100-7F datasheet PDF is available from Intel/Altera's legacy MAX 7000S documentation set, mirrored at datasheet.iiic.cc, FindIC, and Mouser's product detail page. According to the manufacturer datasheet excerpt, the MAX 7000S family datasheet covers device architecture, ISP, JTAG BST, and AC/DC characteristics across the entire MAX 7000S device range.

What is the pinout of the EPM7128SQC100-7F in PQFP-100?

The EPM7128SQC100-7F pinout for the 100-pin PQFP package follows the standard MAX 7000S SQC100 pin assignment with 84 user I/Os distributed across four I/O banks, plus dedicated JTAG pins (TCK, TMS, TDI, TDO), power (VCC), and ground (GND) pins. Refer to the Altera MAX 7000S datasheet pin tables for the exact pin-by-pin function map; the package is a 20×14 mm PQFP.

EPM7128SQC100-7F vs ATF1508AS — which is better for a new design?

For a new design, the Microchip ATF1508AS is the better choice because the EPM7128SQC100-7F is obsolete while the ATF1508AS remains in active production with long-term supply assurance. Both share 128 macrocells in a 100-pin PQFP footprint, but the ATF1508AS adds lower power consumption and modern in-system programming, making it functionally superior for greenfield projects.

Is the EPM7128SQC100-7F suitable for 5V industrial designs?

Yes, the EPM7128SQC100-7F operates from a 4.75 V to 5.25 V supply with 5V-tolerant I/Os, making it well suited to 5V industrial bus interfaces (ISA, VME, parallel peripheral buses). However, its 0 °C to 70 °C commercial temperature range disqualifies it from -40 °C to +85 °C industrial applications; for extended temperature choose the EPM7128SQI100-7 (industrial) variant if available.

What are the key specifications of EPM7128SQC100-7F that engineers should know?

Key EPM7128SQC100-7F specifications engineers must know are: 128 macrocells, 8 LABs, 2,500 usable gates, 84 user I/Os, 7.5 ns tPD, 125 MHz fMAX, 5V supply (4.75–5.25 V), 100-pin PQFP, JTAG BST per IEEE 1149.1, ISP via 4-pin JTAG, and EEPROM non-volatile configuration. These parameters determine whether the device fits legacy 5V glue-logic designs.

Справочные инженерные данные для EPM7128SQC100-7F — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the EPM7128SQC100-7F when maintaining legacy 5V systems that already use this exact OPN and require the 7.5 ns fastest speed grade in the MAX 7000S 100-pin PQFP family. For new designs, do not select it — Intel/Altera has marked it obsolete and active-production alternatives exist. Choose the same-brand EPM7128SQC100-10F (10 ns grade) when maintaining legacy boards where inventory still exists and timing margins allow 10 ns. For industrial-temperature applications, select the EPM7128SQC100-10N (-40 °C to +85 °C, lead-free). For new designs or end-of-life migration, switch to the Microchip ATF1508AS-7AU100 — same 100-pin PQFP footprint, same 128 macrocells, active production status, and a POF2JED tool translates existing POF files. For 3.3V-only modern designs, migrate to MAX II EPM240 or MAX V 5M80ZE64 CPLDs, accepting the redesign cost.

Сравнение с аналогами

Параметр	Этот товар	EPM7128SQC100-10F	EPM7128SQC100-15	EPM7128SQC100-10N	EPM7128SQC100-10	ATF1508AS-7AU100	ATF1508AS-10AU100
Brand	Altera	Altera	Altera	Altera	Altera	Microchip Technology	Microchip Technology
Package	100-pin PQFP (SQC100)	100-pin PQFP - same	100-pin PQFP - same	100-pin PQFP - same	100-pin PQFP - same	100-pin TQFP - same footprint	100-pin TQFP - same footprint
Macrocells	128	128	128	128	128	128	128
Pin-to-Pin Delay (tPD)	7.5 ns	10 ns	15 ns	10 ns	10 ns	7.5 ns	10 ns
User I/O Count	84	84	84	84	84	84	84
Supply Voltage	5V (4.75V–5.25V)	5V (4.75V–5.25V)	5V (4.75V–5.25V)	5V (4.75V–5.25V)	5V (4.75V–5.25V)	5V (4.75V–5.25V)	5V (4.75V–5.25V)
Lifecycle Status	Obsolete	Obsolete	Obsolete	Obsolete	Obsolete	Active	Active
Operating Temperature	0 °C to 70 °C (Commercial)	0 °C to 70 °C	0 °C to 70 °C	-40 °C to 85 °C (Industrial)	0 °C to 70 °C	-40 °C to 85 °C	-40 °C to 85 °C
Lead-Free (RoHS)	Yes (Pb-free, '-F' suffix)	Yes	No	Yes	No	Yes	Yes

Ключевые отличия

7.5 ns fastest speed grade in 100-pin PQFP MAX 7000S family (против EPM7128SQC100-10F)
Active-production drop-in replacement exists (против ATF1508AS-7AU100)
Lead-free RoHS-compliant terminations (против EPM7128SQC100-15)

Заметки по проектированию

The EPM7128SQC100-7F is listed as obsolete by Intel/Altera. Before committing to a new design, validate that sufficient inventory exists for your product lifecycle (typically 5–10 years). For new designs, consider migrating to Microchip ATF1508AS (active production, same 100-pin PQFP footprint, POF2JED translation tool exists) or modern MAX II/MAX V CPLDs, accepting the redesign cost to avoid future obsolescence. For maintenance of existing products, qualify at least two franchised distributors to reduce supply-chain risk and avoid sole-source dependency.

Route the EPM7128SQC100-7F power and ground pins with wide traces — at minimum 20 mil power and 30 mil ground — and place decoupling capacitors (0.1 µF ceramic in parallel with 10 µF tantalum or ceramic) within 100 mil of every VCC/GND pair. For the 100-pin PQFP, distribute five to six VCC/GND pairs around the package perimeter rather than clustering them. Use a continuous ground plane on the layer immediately beneath the device to reduce ground bounce and improve JTAG signal integrity, especially for multi-MHz clock signals routed to global clock pins.

When driving long PCB traces or cables (e.g., backplane connectors) with the EPM7128SQC100-7F, use the open-drain output option available in MAX 7000S with an external pull-up resistor to control rise time and dampen reflections. For high-speed clock or bus signals, enable slew-rate control and avoid series-termination resistors larger than 33 Ω which can introduce timing violations relative to the 7.5 ns tPD budget. Always perform signal-integrity simulation with the actual PCB stack-up before committing to layout.

Do not assume a -7F (Pb-free) part is electrically interchangeable with a -7 (leaded) part in all situations: while silicon is identical, reflow profiles differ and mixed-population boards can fail thermal stress tests. Also, when migrating from EPM7128SQC100-7F to EPM7128SQC100-10F, validate timing closure — the 7.5 ns → 10 ns tPD change can break paths previously meeting 8 ns timing. Finally, do not exceed 5.25V on any I/O pin even briefly; the 5V-tolerant I/Os are not 5.5V-tolerant, and latch-up can occur during power-up transients.

Информация о соответствии

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Без свинца

Yes

Без галогенов

Unknown

Конфликтные минералы

Unknown

RoHS compliance inferred from '-F' (Pb-free) suffix in MPN per Altera/Intel naming convention. Halogen-free and conflict-mineral status not stated in provided web data — confirmed as 'unknown'. Part is obsolete per Intel/Altera MAX 7000S lifecycle notice. AEC-Q100 not applicable (commercial temp range 0 °C to 70 °C).

Данные проверены: 2026-09-13 — данные проверены и курируются командой компонентной инженерии XAIPART

Источники: Distributor, Manufacturer Datasheet, Manufacturer Datasheet, Octopart, Distributor, Octopart, Distributor, Manufacturer Product Page, Octopart, Octopart

Связанные компоненты & термины

Altera Intel EPM7128SQC100-7F MAX 7000S CPLD Complex Programmable Logic Device macrocell Logic Array Block LAB PQFP-100 Plastic Quad Flat Pack 5V tolerant I/O JTAG IEEE 1149.1 Boundary-Scan Test In-System Programming ISP EEPROM non-volatile open-drain output Altera MAX 7000S datasheet glue logic bus arbitration state machine ATF1508AS Microchip Technology RoHS lead-free obsolete PQFP