FDMF5068 - 25V 70A 3-Phase Smart Power Stage | onsemi
Артикул: FDMF5068 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
FDMF5068 Обзор
A Smart Power Stage, or SPS, is an integrated power-conversion building block that places driver circuitry, switching devices, and sensing functions in one package. In the power-management hierarchy, an SPS sits below a multi-phase DC-DC converter and above discrete gate drivers and MOSFETs. Its purpose is to simplify high-current converter design while improving switching performance, layout integration, and system-level monitoring.
The verified product information identifies three integrated MOSFET phases, a 25 V rating, and a 70 A class power stage. These characteristics make the FDMF5068 relevant to compact, high-current multiphase converters that require integrated current and temperature sensors. Its monitoring functions can support converter control, fault detection, and protection strategies, although exact threshold, accuracy, timing, and electrical-limit details must be confirmed in the manufacturer datasheet.
The 39-pin PowerVQFN package supports a compact surface-mount implementation. Its exact dimensions, exposed-pad arrangement, pin names, pin numbering, and thermal data are not available in the supplied search snippets, so the package drawing and complete pin assignment should be verified before layout. The same caution applies to input capacitance, switching frequency limits, dead-time behavior, gate-drive details, current-sense transfer function, and protection thresholds.
Typical use cases include synchronous multiphase buck converters, high-current processor and accelerator power systems, computing equipment, and other compact power-conversion platforms where integrated monitoring and a three-phase power stage can reduce external component count. Application suitability depends on the final converter requirements rather than the 70 A class designation alone.
For design implementation, follow the onsemi datasheet land pattern and recommended high-current PCB layout. Keep power-loop paths short, provide adequate copper and thermal relief, validate decoupling according to the recommended network, and confirm that the selected inductor and switching frequency satisfy the converter design. This page combines verified product identity, sourcing information, technical context, and selection guidance; detailed application claims should be validated against the complete manufacturer documentation.
The FDMF5068 is intended for engineers designing compact, monitored, high-current synchronous buck systems. DigiKey, Mouser, Arrow, Newark, Octopart, and onsemi are listed as available information and purchasing sources in the verified data, while lifecycle, price, stock, and lead time should be checked at the time of quotation.
Аналоги без доработки для FDMF5068 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиFDMF5068 Максимальные параметры и электрические характеристики
| Product Type | Three-phase Smart Power Stage module |
| Phase Count | 3 phases |
| Voltage Rating | 25 V |
| Current Rating | 70 A |
| Integrated Switching Devices | Integrated MOSFETs |
| Control Architecture | Synchronous buck DC-DC converter power stage |
| Current Monitoring | Integrated current sensing |
| Temperature Monitoring | Integrated temperature sensing |
| Driver Integration | Integrated driver IC |
| Корпус | 39-pin PowerVQFN |
| Тип монтажа | Surface mount |
| Application Class | High-current, high-frequency synchronous buck DC-DC converters |
Руководство по цоколевке FDMF5068 в корпусе 39-pin powervqfn
Цоколевка для FDMF5068 (корпус 39-pin powervqfn). Этот силовой прибор имеет выводы затвора, стока и истока. Для неполяризованных корпусов обратитесь к техническому описанию производителя для точной ориентации вывода 1 и деталей посадочного места. Типичные применения включают проектирование источников питания, управление двигателями и коммутацию нагрузки.
Нет подробных данных о распиновке для FDMF5068.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
FDMF5068 подходит для 6 применениеs: High-Current Multiphase Buck Converter, Processor and Accelerator Power Rails, High-Frequency Synchronous Conversion, High-Current Computing Power Conversion, Compact Power-Supply Module, Industrial High-Current Power Conversion.
High-Current Multiphase Buck Converter
The FDMF5068 fits the power stage of a compact three-phase synchronous buck converter where integrated MOSFETs, driver functionality, current sensing, and temperature sensing can reduce external circuitry. Its verified 25 V and 70 A class identify the intended high-current power-conversion class, while the 39-pin PowerVQFN supports a surface-mount implementation. The converter designer must still confirm input range, phase current limits, switching frequency, inductor selection, dead time, fault behavior, and thermal derating from the complete datasheet before layout approval.
Рекомендуется
Processor and Accelerator Power Rails
The integrated three-phase architecture makes FDMF5068 relevant to compact processor and accelerator power rails requiring high current density and monitoring. Its verified current and temperature sensors may help a controller observe power-stage conditions, while the integrated MOSFETs can reduce the number of separately placed switching elements. Selection still requires matching the actual converter input voltage, transient target, current limit, switching frequency, control method, and thermal environment; those parameters are not supplied in the verified search data.
Рекомендуется
High-Frequency Synchronous Conversion
onsemi positions FDMF5068 for high-current, high-frequency synchronous buck conversion, where integrated driver and MOSFET elements can support compact power-loop layouts. The module is attractive when switching-node losses and external driver count are important design concerns. Designers should verify the exact switching-frequency limits, gate-drive characteristics, bootstrap requirements, propagation delays, and layout recommendations before assuming that the module is suitable for a particular controller. The advertised 70 A class is not a substitute for a complete efficiency and thermal analysis.
Рекомендуется
High-Current Computing Power Conversion
FDMF5068 can be considered in compact computing equipment that needs a high-density power stage with integrated current and temperature monitoring. The 39-pin PowerVQFN is intended for a surface-mount design, and the three-phase arrangement can distribute power conversion across multiple integrated phases. A successful implementation depends on controller compatibility, power-stage current sharing, current-sense calibration, fault handling, exposed-pad layout, and adequate cooling. No specific computing platform is verified in the supplied data, so these points require application-level validation.
Рекомендуется
Compact Power-Supply Module
The FDMF5068 is suitable for evaluation inside a compact, monitored power-supply module when the system uses a compatible three-phase synchronous buck topology. Integrating the MOSFETs and driver IC can reduce external part count and simplify the power-stage footprint, while current and temperature sensors support supervisory functions. The module still requires careful input filtering, output filtering, layout symmetry, thermal management, and fault-response validation. The verified data does not provide output-voltage programming, efficiency curves, or thermal resistance.
Рекомендуется
Industrial High-Current Power Conversion
FDMF5068 can be evaluated in industrial power-conversion equipment where compactness, integrated monitoring, and high-current switching are useful. The verified product description identifies a 25 V, 70 A three-phase Smart Power Stage with integrated MOSFETs and current and temperature sensors, which can reduce the external discrete power-stage count. Industrial suitability cannot be concluded from those ratings alone: environmental limits, isolation requirements, EMI performance, component derating, and functional-safety needs must be checked separately. Use the manufacturer datasheet and application notes before release.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для FDMF5068 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 39-pin PowerVQFN |
| Brand | onsemi |
| Product Type | Three-phase Smart Power Stage module |
| Phase Count | 3 phases |
| Voltage Rating | 25 V |
| Current Rating | 70 A |
| Integrated Monitoring | Current sensing and temperature sensing |
| Power Conversion Role | High-current, high-frequency synchronous buck DC-DC converter |
| Switching Devices | Integrated MOSFETs |
Ключевые отличия
- Integrated three-phase Smart Power Stage architecture (против Generic discrete MOSFET power stage)
- Integrated monitoring (против Unmonitored power-driver module)
- High-current power-conversion positioning (против Lower-current Smart Power Stage)
- Compact integration (против Separate driver and MOSFET solution)
Заметки по проектированию
Estimated: the FDMF5068 must be thermally analyzed at the actual switching frequency, phase current, duty cycle, ambient temperature, and PCB copper area because those values are not supplied in the verified search data. Calculate conduction loss from MOSFET on-resistance and switching loss from device transition data after obtaining the datasheet, then verify junction temperature using the manufacturer thermal model. Do not assume that the 70 A rating permits continuous 70 A operation without derating.
Use the onsemi recommended PowerVQFN land pattern and keep the high-current input, switching, and power-ground loops as short and compact as practical. Preserve the exposed-pad and thermal-via arrangement specified by the manufacturer, maintain symmetrical high-current routing, and place required input and bootstrap capacitors close to their associated pins. Because the complete pinout is unavailable in the supplied data, do not finalize placement until the official package drawing and datasheet are reviewed.
The verified identity supports a 25 V, three-phase, 70 A class synchronous buck stage, but the actual converter operating points must remain within the complete datasheet limits. Verify input-voltage range, phase current sharing, current-sense behavior, switching frequency, dead time, bootstrap voltage, fault thresholds, and output-filter requirements before layout. Controller selection should be based on confirmed compatibility rather than the generic fact that another converter is a multiphase controller.
Do not treat a generic 25 V or 70 A Smart Power Stage as a drop-in replacement. A valid replacement must match the 39-pin PowerVQFN footprint, pinout, phase connections, sensing interfaces, control timing, protection behavior, and thermal characteristics. Also do not infer RoHS, REACH, automotive, lifecycle, or lead-free status from distributor listings. Confirm those items using current manufacturer documentation and authorized sourcing records.
Информация о соответствии
The supplied search snippets do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification information. Confirm current compliance declarations with onsemi or an authorized distributor.
