IG5208 - PCIe Gen3 x2 NVMe SSD Controller | InnoGrit
Артикул: IG5208 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
IG5208 Обзор
An SSD controller is the semiconductor core inside an NVMe solid-state drive. It connects a host interface to NAND flash, manages logical-to-physical address translation, coordinates data transfers, and implements flash error correction and wear-management functions. The IG5208 belongs to the PCIe storage-controller hierarchy and targets M.2 and BGA SSD form factors.
Key verified features include a PCIe Gen3 x2 host interface, NVMe 1.3 support, capacity up to 2 TB, four flash channels, and a DRAM-less architecture using HMB. Its lack of dedicated DRAM reduces bill-of-materials cost, but HMB availability depends on host support and system behavior. The supplied data does not specify NAND types, ECC details, endurance, power consumption, package dimensions, pin count, operating temperature, or lifecycle status.
Typical uses include client SSDs, M.2 NVMe modules, embedded storage, and cost-focused systems requiring PCIe 3.0 x2 connectivity. The controller's four-channel NAND organization is intended to support high storage capacity while maintaining a compact SSD design. Firmware, NAND qualification, thermal validation, and PCB signal-integrity work remain essential parts of a successful IG5208-based product.
For designs using IG5208, validate the exact NAND interface, PCIe lane routing, power sequencing, thermal profile, and HMB behavior with the manufacturer. The supplied overview does not expose a complete electrical datasheet or package pinout, so those implementation details should be obtained directly from InnoGrit before layout release. This page summarizes verified source information and clearly separates unavailable parameters from confirmed specifications.
Аналоги без доработки для IG5208 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиIG5208 Максимальные параметры и электрические характеристики
| Product Type | PCIe Gen3 x2 NVMe 1.3 SSD controller |
| Host Interface | PCIe Gen3 x2 |
| Storage Protocol | NVMe 1.3 |
| Maximum Capacity | Up to 2 TB |
| Flash Channels | 4 |
| Architecture | DRAM-less |
| Host Memory Buffer | Supported |
| Sequential Read Performance | 1750 MB/s |
| Sequential Write Performance | 1500 MB/s |
| Target Form Factors | M.2 and BGA SSDs |
| Manufacturer Product Family | Shasta |
| PCI Vendor ID | 1DBE |
| PCI Device ID | 5208 |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Руководство по цоколевке IG5208 в корпусе standard
Цоколевка для IG5208 (корпус standard). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для IG5208.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
IG5208 подходит для 6 применениеs: Client PCIe NVMe SSD, M.2 NVMe Storage Module, Embedded PCIe Storage, Cost-Optimized BGA SSD, High-Speed Storage Platform, Portable Computing Storage.
Client PCIe NVMe SSD
The IG5208 fits cost-sensitive client SSD designs that require PCIe Gen3 x2 connectivity and NVMe 1.3 support. Its four flash channels and capacity of up to 2 TB provide a suitable platform for mainstream solid-state storage, while the DRAM-less HMB architecture removes a dedicated external DRAM component from the bill of materials. The reported sequential limits of 1750 MB/s read and 1500 MB/s write indicate a high-speed PCIe 3.0 storage target, although real results depend on NAND selection and firmware. Engineers must qualify the complete controller, NAND, firmware, and thermal design before production.
Рекомендуется
M.2 NVMe Storage Module
The IG5208 is suitable for an M.2 NVMe storage module when the host supports PCIe Gen3 x2 and the module design is validated with the controller's supported NAND organization. Its NVMe 1.3 protocol and reported 1750 MB/s sequential read capability align with high-performance client storage. HMB can reduce the need for dedicated DRAM, but host operating-system behavior and firmware must be checked because buffering performance may vary with system memory pressure. Package, power, and signal-integrity details are not supplied and must be obtained before PCB layout.
Рекомендуется
Embedded PCIe Storage
The IG5208 can serve as the controller in an embedded PCIe storage design when the system requires NVMe 1.3, a two-lane PCIe interface, and a cost-sensitive architecture. Its DRAM-less HMB implementation may be useful in embedded systems where adding a separate DRAM cache would increase cost or board complexity. However, embedded hosts must provide predictable memory access for HMB, and the complete design must satisfy the controller's power, thermal, firmware, and NAND requirements. The verified data does not establish operating-temperature limits, endurance, or long-term lifecycle status.
Рекомендуется
Cost-Optimized BGA SSD
The IG5208 is applicable to a cost-optimized BGA SSD platform targeting capacities up to 2 TB. The source material specifically identifies the Shasta family with BGA SSD form factors, while the four-channel NAND organization supports a structured flash architecture. The DRAM-less HMB design can reduce external memory cost, but BGA substrate routing and thermal performance are sensitive to package geometry and power integrity. Since no package drawing, pinout, NAND interface, or thermal limits are included in the verified data, the controller must be used only with manufacturer-approved reference designs and complete qualification.
Рекомендуется
High-Speed Storage Platform
The IG5208 can form the basis of a high-speed PCIe 3.0 storage platform using its Gen3 x2 interface and reported sequential throughput of 1750 MB/s read and 1500 MB/s write. The architecture is intended to deliver useful performance while eliminating dedicated DRAM through HMB. To realize those figures consistently, the SSD must use an appropriate NAND configuration, valid firmware, proper queueing behavior, and a host system with sufficient PCIe and storage-driver support. Thermal throttling, flash quality, workload type, and firmware tuning can change observed performance.
Рекомендуется
Portable Computing Storage
The IG5208 may be used in portable computing products that require a compact NVMe SSD controller with PCIe Gen3 x2 connectivity. The DRAM-less HMB architecture can lower component cost and reduce the memory content of the storage design, which is useful in space- and cost-sensitive systems. Suitability for a particular notebook or tablet still depends on power limits, thermal conditions, host HMB support, firmware compatibility, and the selected NAND package. Those implementation details are not supplied in the verified sources and must be validated experimentally before product release.
Рекомендуется
Справочные инженерные данные для IG5208 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | InnoGrit |
| PCIe Interface | PCIe Gen3 x2 |
| NVMe Version | NVMe 1.3 |
| Maximum Capacity | Up to 2 TB |
| Flash Channels | 4 |
| Architecture | DRAM-less |
| Host Memory Buffer | Supported |
| Sequential Read Performance | 1750 MB/s |
| Sequential Write Performance | 1500 MB/s |
| Target SSD Form Factors | M.2 and BGA SSDs |
| PCI Vendor ID | 1DBE |
| PCI Device ID | 5208 |
Ключевые отличия
- DRAM-less architecture with HMB support (против Any external-DRAM NVMe controller)
- PCIe Gen3 x2 host interface (против SATA SSD controllers)
- Four flash channels (против Single-channel or two-channel SSD controllers)
- Reported sequential throughput (против Lower-speed PCIe SSD controllers)
- M.2 and BGA SSD positioning (против Controllers limited to one SSD form factor)
Заметки по проектированию
Do not begin PCB power planning from the public overview alone. Obtain the IG5208 electrical specification and reference design to identify every supply rail, sequencing requirement, current limit, decoupling target, and power-state transition. Verify the design with worst-case NAND activity and host recovery conditions rather than relying on nominal controller specifications.
Treat the PCIe Gen3 x2 interface and NAND channels as high-speed routed structures. Use the manufacturer's controlled reference layout, differential-impedance guidance, return-path planning, and package escape guidance when available. Because the supplied data does not identify the package or pinout, PCB placement must not be inferred from public overview material.
Validate thermal performance with the selected NAND, SSD enclosure, airflow or conduction path, and expected workload. The reported 1750 MB/s read and 1500 MB/s write figures do not establish sustained thermal limits. Measure controller and NAND temperatures during sequential and random workloads, then confirm that the chosen enclosure does not cause unacceptable throttling or reliability degradation.
Do not assume that a controller with the same NVMe version is interchangeable. SSD controllers differ in package, NAND interface, firmware behavior, security features, endurance management, and power requirements. Confirm all of those items with InnoGrit and complete SSD validation before changing controller suppliers.
Plan the PCB around the exact NAND packages and SSD form factor selected for the product. The four-channel architecture and HMB feature do not specify which NAND packages are supported. Use the latest manufacturer reference design and package documentation to determine fanout, layer transitions, grounding, thermal pads, and connector or BGA escape requirements.
Информация о соответствии
The supplied verified web data does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. The product is an SSD controller rather than an automotive-qualified component in the supplied evidence, so AEC-Q100 is recorded as not_applicable only for the provided classification.