Texas Instruments

INA103KU/1K - Low-Noise Instrumentation Amplifier | Texas Instruments

Артикул: INA103KU/1K ✓ Активен
250 uV Vdss 16-pin SOIC (DW) Package
MOQ: 1 |

INA103KU/1K Обзор

Texas Instruments INA103KU/1K is a low-noise, low-distortion instrumentation amplifier designed for differential receivers and precision signal conditioning. The device is specified for a 250 uV maximum input offset voltage, 15 V/us slew rate, 6 MHz bandwidth, and operation from plus or minus 9 V to plus or minus 25 V, all in a 16-pin SOIC package.

An instrumentation amplifier is a specialized analog amplifier that amplifies the voltage difference between two inputs while rejecting common-mode noise and interference. INA103 devices are commonly used when a sensor output is small, differential, and exposed to noisy industrial or audio environments. The internal three-amplifier architecture provides balanced input handling, high input impedance, and adjustable gain through an external resistor.

The INA103 is intended for high-gain audio and measurement applications where low noise and low distortion are important. Its current-feedback circuitry is designed to maintain wide bandwidth and dynamic response, while the balanced input structure helps reject interference picked up by long cable connections. The manufacturer describes the amplifier as suitable for low-level audio signals such as balanced low-impedance microphones.

For instrumentation use, the INA103 can amplify differential sensor signals while preserving a high common-mode rejection ratio. Its electrical performance makes it useful in audio preamplifiers, balanced line receivers, laboratory measurement equipment, industrial sensor interfaces, and communications equipment. The wide supply-voltage range supports both lower-voltage and higher-voltage analog systems when the circuit design accounts for the selected gain and output-swing limits.

The main design consideration is gain configuration. The gain-setting resistor determines the closed-loop voltage gain, so resistor tolerance and temperature stability directly affect measurement accuracy. Input and output filtering should be selected according to the source impedance, signal bandwidth, and required noise reduction. The 16-pin SOIC package also requires careful PCB layout around the input, feedback, power, and ground pins.

This page combines the INA103KU/1K ordering information, package details, technical specifications, application guidance, and structured drop-in alternatives. It is intended to help engineers evaluate whether the INA103’s low-noise, low-distortion instrumentation-amplifier performance fits a differential audio, measurement, or industrial signal-conditioning design.

Аналоги без доработки для INA103KU/1K — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с INA103KU/1K (тот же форм-фактор и посадочное место) — отличается по Package, Architecture, Input Offset Voltage, Product Type, Slew Rate.

Texas Instruments
Input Offset Voltage: 25 uV max
Texas Instruments
Package: 16-SOIC
Architecture: Current-feedback circuitry
Input Offset Voltage: 250 µV maximum

INA103KU

✅ Прямая замена
Texas Instruments
📦 16-pin SOIC (DW)
Monolithic instrumentation amplifier · 1 circuit · 16-SOIC · Surface mount · 9 V to 25 V · 6 MHz · 15 V/s · 250 µV maximum

Уточнить цену

Открыть даташит →

INA103KUG4

✅ Прямая замена
📦 16-pin SOIC (DW)
Same INA103 family and 16-pin SOIC footprint; qualification and ordering suffix differ

📋 Справочный аналог (нет в каталоге)

INA101KU/1K

✅ Прямая замена
Texas Instruments
📦 16-pin SOIC (DW)
Instrumentation Amplifier · 1 · 25 uV max · 0.25 uV/C max · 0.002% max · 13 nV/sqrt(Hz) · High CMR at 60 Hz · 10^10 ohms

Уточнить цену

Открыть даташит →

INA103KU/1K Максимальные параметры и электрические характеристики

Product Type Low-noise, low-distortion instrumentation amplifier
Architecture 3-amplifier instrumentation amplifier
Maximum Input Offset Voltage 250 uV
Slew Rate 15 V/us
Bandwidth 6 MHz
Supply Voltage Range +/-9 V to +/-25 V
Input Type Differential
Gain Configuration External resistor
Корпус 16-pin SOIC (DW)
Тип монтажа Surface Mount

Руководство по цоколевке INA103KU/1K в корпусе 16-pin soic (dw)

Цоколевка для INA103KU/1K (корпус 16-pin soic (dw)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 16-pin soic (dw) для INA103KU/1K

Нет подробных данных о распиновке для INA103KU/1K.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

INA103KU/1K подходит для 6 применениеs: Balanced Microphone Preamplifier, Precision Differential Sensor Interface, Laboratory Instrumentation Front End, Balanced Audio Line Receiver, Industrial Bridge Measurement, Communications Interface Amplifier.

🎧

Balanced Microphone Preamplifier

The INA103KU/1K fits balanced low-level audio receiver designs because its differential input rejects common-mode interference while preserving a wide signal-path bandwidth. The specified 250 uV maximum input offset voltage, 6 MHz bandwidth, and 15 V/us slew rate provide useful headroom for low-level microphone signals and professional audio equipment. Place the gain-setting resistor close to the device, keep input traces short, and use the manufacturer’s reference layout to preserve noise performance. Verify the selected gain against output swing and supply limits before production.

🏭

Precision Differential Sensor Interface

The INA103KU/1K is suitable for conditioning differential outputs from sensors where common-mode noise and cable pickup would contaminate a single-ended measurement. Its 250 uV maximum input offset voltage supports small-signal measurements, while the 6 MHz bandwidth and 15 V/us slew rate provide dynamic range for sensors that need to respond to transients. The external gain network defines the measurement range, so use stable resistors and confirm the common-mode, output-swing, and supply constraints from the manufacturer datasheet.

🖥️

Laboratory Instrumentation Front End

The INA103KU/1K can form the input stage of laboratory instrumentation where a small differential signal must be amplified without adding substantial noise or distortion. The low-noise, low-distortion architecture is appropriate for measurement front ends, bridge-related circuits, and precision signal acquisition. Set the gain with the external resistor and place input filtering close to the amplifier to control bandwidth. The 16-pin SOIC footprint supports conventional surface-mount layouts, but grounding and bypass-capacitor placement remain critical to measured performance.

🎧

Balanced Audio Line Receiver

For balanced audio line receivers, the INA103KU/1K provides differential input handling with a 6 MHz bandwidth and 15 V/us slew rate. These characteristics allow the amplifier to process low-level professional audio signals while maintaining good dynamic response. The amplifier’s gain is set externally, which allows the receiver to accommodate several nominal signal levels through different resistor values. Confirm rail-to-rail headroom, maximum output signal, and source impedance, and use short, symmetric input routing to minimize conversion of common-mode noise.

🏭

Industrial Bridge Measurement

The INA103KU/1K can be used in industrial bridge-measurement circuits when the bridge output is differential and the amplifier’s common-mode range is adequate. Its 250 uV maximum input offset voltage and differential input structure help reduce measurement error from common-mode voltage and cable interference. The wide 6 MHz bandwidth can accommodate fast sensor events, although filtering may be needed to limit noise. Validate excitation limits, input protection, grounding, and operating temperature against the final enclosure and industrial environment.

🌐

Communications Interface Amplifier

The INA103KU/1K is suitable for communications interface amplification where a differential receiver must reject noise and preserve signal amplitude. Its balanced input architecture supports receiver-oriented designs, and the 15 V/us slew rate plus 6 MHz bandwidth provide response for many low- and medium-frequency communication signals. Use a gain resistor that keeps the output within the usable swing, and check whether the source impedance requires additional input buffering. Follow the manufacturer layout guidance for feedback routing and supply bypassing.

What is the INA103KU/1K?
The INA103KU/1K is a Texas Instruments low-noise, low-distortion instrumentation amplifier for differential receivers. It is specified for a 250 uV maximum input offset voltage, 15 V/us slew rate, 6 MHz bandwidth, and operation from plus or minus 9 V to plus or minus 25 V. The device is packaged in a 16-pin SOIC. According to the Texas Instruments INA103 datasheet, its balanced input and current-feedback circuitry support wide bandwidth and excellent dynamic response.
What are the key specifications of INA103KU/1K that engineers should know?
The INA103KU/1K combines a 3-amplifier instrumentation-amplifier architecture with a 250 uV maximum input offset voltage, 15 V/us slew rate, and 6 MHz bandwidth. Its differential inputs use an external gain-setting resistor, and its supply range is plus or minus 9 V through plus or minus 25 V. The 16-pin SOIC package is identified by Texas Instruments as DW. These parameters make it appropriate for precision differential signal conditioning and low-level audio receiver designs.
Where can I download the INA103KU/1K datasheet PDF?
Download the official Texas Instruments INA103 datasheet from https://www.ti.com/lit/ds/symlink/ina103.pdf. The manufacturer product page at https://www.ti.com/product/INA103 also provides technical parameters, ordering information, and quality documentation. The part-specific ordering entry identifies INA103KU/1K as a low-noise, low-distortion instrumentation amplifier in a 16-pin SOIC package. Use the manufacturer datasheet for the complete pin description, electrical tables, gain equations, and application circuit.
Where can I find the INA103KU/1K pinout?
Use the pin-description table in the Texas Instruments INA103 datasheet to assign the INA103KU/1K connections. The device is offered in a 16-pin SOIC package, designated DW by Texas Instruments, and its package drawing includes the physical pin numbering and orientation. The manufacturer product page confirms the 16-pin SOIC configuration. Do not infer the pin functions from a generic SOIC drawing because the differential inputs, gain resistor, supply rails, feedback connections, and output have fixed assignments.
What supply voltage does the INA103KU/1K require?
The INA103KU/1K operates from plus or minus 9 V to plus or minus 25 V. According to the Texas Instruments INA103 datasheet, the exact allowable combination of positive and negative supply rails must remain within the device’s operating limits. The part is intended for dual-supply analog systems, with separate positive and negative rails supporting bipolar signal paths. Check headroom for the selected gain, input range, and output voltage before finalizing the power architecture.
What is the bandwidth and slew rate of the INA103KU/1K?
The INA103KU/1K has a specified bandwidth of 6 MHz and a slew rate of 15 V/us. These figures describe its high-speed differential-signal capability and make it suitable for low-level audio, balanced receiver, and instrumentation applications rather than only slow sensor-conditioning signals. The bandwidth depends on the selected gain, source impedance, feedback network, and output loading. Confirm the gain-versus-bandwidth curve in the manufacturer datasheet when the signal must preserve a specified upper-frequency limit.
Can INA103KU/1K be used for low-level audio signals?
Yes, the INA103KU/1K is specifically suited to low-level audio signals such as balanced low-impedance microphone signals. Texas Instruments highlights the amplifier’s balanced input, low noise, low distortion, and current-feedback circuitry for professional audio receiver applications. Use the device with a suitable gain resistor and input/output filtering, and observe the supply-rail and output-swing limits. The 6 MHz bandwidth provides substantially more signal-path bandwidth than most conventional audio preamplifier stages require.
How is the gain set on the INA103KU/1K?
The INA103KU/1K uses an external gain-setting resistor to configure its closed-loop voltage gain. The exact gain equation and recommended resistor values are given in the Texas Instruments INA103 datasheet. For accurate measurement systems, account for resistor tolerance and temperature coefficient, because gain error is directly influenced by the external network. Also keep the feedback connections short and follow the manufacturer layout guidance to preserve bandwidth and noise performance.
What is the INA103KU/1K input offset voltage?
The INA103KU/1K has a specified maximum input offset voltage of 250 uV. This value is important when the amplifier handles small differential sensor outputs because offset error can become significant relative to the measured signal. According to the Texas Instruments INA103 datasheet, actual offset behavior depends on gain, supply voltage, temperature, and output conditions. Use the full datasheet tables rather than the maximum value alone when calculating worst-case measurement error.
What is the best drop-in replacement for INA103KU/1K?
The INA103 family offers the closest same-brand drop-in candidates because it preserves the Texas Instruments instrumentation-amplifier architecture and related electrical characteristics. INA103KU/1K is the exact SOIC ordering variant, while INA103KUG4 is another documented family option. Before replacing an installed device, verify the package pinout, gain resistor value, supply limits, temperature range, and ordering suffix. Functional equivalence does not by itself guarantee every qualification requirement.
Can INA101KU/1K replace INA103KU/1K?
INA101KU/1K can be considered for a replacement review because it is identified in the INA103KU comparison material as a related SOIC instrumentation amplifier, but it should not be treated as automatically interchangeable. The two families have different noise, distortion, bandwidth, and application positioning. Compare the manufacturer datasheets for gain range, input offset voltage, slew rate, supply voltage, common-mode range, distortion, and pin assignments before approving INA101KU/1K as a drop-in substitute.
Is INA103KU/1K suitable for industrial sensor interfaces?
The INA103KU/1K can suit industrial sensor interfaces when the sensor output is differential and the circuit operates within the amplifier’s specified supply and common-mode limits. Its 250 uV maximum input offset voltage, 15 V/us slew rate, and balanced input structure support precision conditioning of low-level signals. Industrial protection, filtering, grounding, and surge requirements may require additional circuitry, and the final design should verify the full electrical limits from the Texas Instruments datasheet.
What is the difference between INA103KU/1K and INA103KU?
INA103KU/1K and INA103KU identify closely related orderable versions of the Texas Instruments INA103 family, with the slash and 1K code reflecting the specific ordering and packaging designation. One comparison source specifically addresses INA103KU versus INA103KU/1K, confirming that both are related INA103KU variants. The decisive checks are the orderable drawing, temperature range, reel or tube packing, and shipping quantity shown on the Texas Instruments product page.
Where to buy INA103KU/1K online?
Use the Request a Quote form on this page to request the INA103KU/1K, current availability, and lead time. The Texas Instruments product page lists the exact INA103KU/1K ordering entry and its 16-pin SOIC package. Commercial availability can change by lot, date code, and packaging quantity, so confirm the requested configuration during quotation rather than relying on a static listing. XAIPART can then provide the current commercial response for the exact MPN.
What is the lead time and stock status for INA103KU/1K?
Current stock and lead time for INA103KU/1K should be confirmed through the Request a Quote form on this page. The exact MPN includes the Texas Instruments ordering and packaging code, and availability can vary with reel quantity, manufacturing lot, and date code. The manufacturer product page identifies the part as an orderable INA103KU/1K configuration, while distributor listings may update stock independently. Submit the desired quantity and packaging requirements for a current answer.

Справочные инженерные данные для INA103KU/1K — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the INA103KU/1K when your design needs a low-noise, low-distortion instrumentation amplifier for balanced audio, differential sensor signals, or laboratory measurement. Its 250 uV maximum input offset voltage, 6 MHz bandwidth, 15 V/us slew rate, and dual-supply range make it particularly suitable when the signal is small and differential but still requires fast response. INA103KU and INA103KUG4 are useful same-family review options when ordering, qualification, or packaging requirements differ. INA101KU/1K may be relevant for a related receiver design, but its gain, noise, distortion, bandwidth, and common-mode limits must be checked before substitution. For a production replacement, verify the exact pinout, gain resistor, supply rails, temperature range, and qualification requirements in the Texas Instruments documentation.

Сравнение с аналогами

Параметр Этот товар INA103KU INA103KUG4 INA101KU/1K
Package 16-pin SOIC (DW) 16-pin SOIC (DW) 16-pin SOIC (DW) 16-pin SOIC (DW)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Low-noise, low-distortion instrumentation amplifier INA103 family instrumentation amplifier INA103 family instrumentation amplifier INA101 family instrumentation amplifier
Input Type Differential Differential Differential Differential

Ключевые отличия

  • Low-noise, low-distortion differential amplification (против INA101KU/1K)
  • Wide signal-path dynamics (против INA101KU/1K)
  • Wide dual-supply operating range (против INA103KUG4)

Заметки по проектированию

Place the external gain resistor and feedback components close to the INA103KU/1K and follow the Texas Instruments datasheet layout. Keep differential input traces short, matched in length, and referenced to a continuous ground plane. Place supply bypass capacitors near the positive and negative supply pins, and route high-current return paths away from the input and gain network. This minimizes parasitic feedback and helps preserve the device’s low-noise, low-distortion performance.

Choose the gain resistor and optional input filters using the source impedance and required signal bandwidth. The INA103KU/1K is specified for 6 MHz bandwidth and 15 V/us slew rate, but the closed-loop response also depends on the gain, feedback network, load, and PCB parasitics. For cable-connected sources, add appropriate input filtering and protection after checking the amplifier’s absolute maximum ratings. Avoid excessive input capacitance that could reduce stability or distort fast transients.

Design the dual-supply rails around the specified plus or minus 9 V to plus or minus 25 V operating range and the voltage required for the selected gain and output swing. Use separate, short supply paths and adequate bypass capacitance at the device. Do not assume that a valid output can be obtained at every input level or supply combination. Verify startup, shutdown, and rail-sequencing behavior in the complete analog system.

Do not treat a related INA101 or INA103 ordering suffix as automatically equivalent without reviewing the manufacturer datasheet. Confirm gain equations, pin names, common-mode range, offset voltage, distortion, bandwidth, supply limits, temperature range, and package dimensions. The slash and 1K ordering codes can affect packaging and commercial configuration even when the electrical family is related. Perform a circuit-level review before approving a replacement in production.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance declarations are not stated in the cited search results. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status against the current Texas Instruments product documentation.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

INA103KU/1K datasheet INA103KU/1K pinout INA103KU/1K datasheet pdf INA103KU/1K specifications INA103KU/1K equivalent INA103KU/1K replacement INA103KU/1K cross reference INA103KU/1K vs INA101KU/1K INA103KU/1K SOIC-16 INA103KU/1K price INA103KU/1K stock Texas Instruments INA103KU/1K INA103KU/1K instrumentation amplifier INA103KU/1K application circuit INA103KU/1K audio receiver

Связанные компоненты & термины

Texas Instruments INA103KU/1K INA103KU INA103KUG4 INA101KU/1K Instrumentation Amplifier Low-Noise Amplifier Low-Distortion Amplifier Differential Receiver Signal Conditioning Voltage Amplifier Analog Semiconductor Integrated Circuit SOIC-16 Surface Mount 250 uV 15 V/us 6 MHz Dual Supply Common-Mode Rejection Balanced Audio Professional Audio RoHS REACH
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ