ISO7762QDWQ1 - 6-Ch 100Mbps Reinforced Digital Isolator | TI
Артикул: ISO7762QDWQ1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.31 | $5,31 |
| 10 | $4.78 | $47,80 |
| 100 | $3.95 | $395,00 |
| 500 | $3.42 | $1.710,00 |
| 1.000 | $2.99 | $2.990,00 |
ISO7762QDWQ1 Обзор
A digital isolator is a semiconductor device that transfers logic signals between circuits while maintaining galvanic isolation, typically thousands of protection classes by using capacitive, inductive, or optical coupling across an internal dielectric. The ISO7762 product family belongs to the broader category of integrated isolators, interface ICs within the power management / isolation product taxonomy, line sensing and communication between high-voltage and low-voltage domains. In a multi-rail system, the isolator sits between a high-voltage gate driver or motor control stage and a low-voltage MCU/ASIC, breaking ground loops and protecting the low-voltage side from high-voltage transients, surges, and fault events. Compared to optocouplers, modern CMOS digital isolators offer faster data rates, lower propagation delay, lower power, better CMTI, and superior temperature and lifetime stability.
Key differentiating features of the ISO7762QDWQ1 include 100 Mbps signaling across all six channels with typical propagation delay of 11 ns (5 ns max skew), wide-input voltage tolerance of 2.25 V to 5.5 V on each side for cross-domain level translation, reinforced 5000 Vrms per UL 1577-1, and integrated robust EMC certification that simplifies system-level ESD/EFT/surge compliance testing. The device supports default low or high output on power loss via enable pin control, and is available in 16-pin SOIC wide-body and SSOP packages. Per TI datasheet, the supply current is typically 14 mA at 100 Mbps with 5 V supplies on both sides, and the device meets VDE 0884-11 basic and reinforced insulation.
The ISO7762QDWQ1 is most commonly used in industrial automation, factory automation, and process-control networks, hybrid and electric vehicle (HEV/EV) powertrain, charging station, and battery management systems (BMS), solar inverter and photovoltaic (PV) island, telecom data center power conversion and digital control interfaces, isolated SPI/UART/CAN/JTAG links, motor-control gate-drive isolation, and high-voltage medical instrumentation requiring 5000 Vrms reinforcement. The combination of 100 Mbps speed and 85 kV/us CMTI makes it ideal for driving SiC and IGBT gate drivers where high dv/dt transitions are routine.
When designing with the ISO7762QDWQ1, place 0.1 uF and 10 uF VCC bypass capacitors close to each supply pin, and verify that the VDE 0884-11 creepage/clearance and PCB layout rules meet your safety isolation rating. The default output state on power loss is determined by the EN pin setting; plan enable sequencing accordingly to avoid undefined logic during multi-rail power-up.
Аналоги без доработки для ISO7762QDWQ1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ISO7762FQDWRQ1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISO7762QDBQ1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ISO7761QDWQ1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ISO7742QDWQ1
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ISO7762QDWQ1 Характеристики
| Product Type | Digital Isolator |
| Isolation Type | Capacitive (SiO2) |
| Number of Channels | 6 |
| Channel Configuration | 4 Forward / 2 Reverse |
| Скорость передачи данных | 100 Mbps |
| Isolation Voltage (RMS) | 5000 Vrms |
| Common-Mode Transient Immunity (CMTI) | 85 kV/us (minimum) |
| Propagation Delay (typ) | 11 ns |
| Supply Voltage Range | 2.25 V to 5.5 V |
| Supply Current (typ at 100 Mbps) | 14 mA |
| Диапазон рабочих температур | -40 C to +125 C |
| Корпус | 16-pin SOIC wide-body (DWQ) |
| Тип монтажа | Surface Mount |
| AEC-Q100 Qualification | Qualified (Automotive Grade) |
| Статус RoHS | Compliant |
| UL Recognition | UL 1577-1 (5000 Vrms) |
| VDE Certification | VDE 0884-11 Reinforced Insulation |
Конфигурация выводов ISO7762QDWQ1
| Контакт 1 | VCC1 — Power supply, side 1 |
| Контакт 2 | GND1 — Ground, side 1 |
| Контакт 3 | IN1 — Input, channel 1 (forward) |
| Контакт 4 | IN2 — Input, channel 2 (forward) |
| Контакт 5 | IN3 — Input, channel 3 (forward) |
| Контакт 6 | IN4 — Input, channel 4 (forward) |
| Контакт 7 | OUT2 — Output, channel 2 (reverse direction input) |
| Контакт 8 | OUT3 — Output, channel 3 (reverse direction input) |
| Контакт 9 | GND2 — Ground, side 2 |
| Контакт 10 | EN2 — Enable, side 2 |
| Контакт 11 | OUT1 — Output, channel 1 (forward direction output) |
| Контакт 12 | OUT2_iso — Output, side-2 channel 2 (reverse-direction output) |
| Контакт 13 | OUT3_iso — Output, side-2 channel 3 (reverse-direction output) |
| Контакт 14 | IN5 — Input, channel 5 (reverse direction input) |
| Контакт 15 | IN6 — Input, channel 6 (reverse direction input) |
| Контакт 16 | VCC2 — Power supply, side 2 |
Типичное применение
ISO7762QDWQ1 подходит для 6 применениеs: Automotive HEV/EV Powertrain Isolation, Industrial Motor Drive and Servo, Solar Inverter and Photovoltaic System, Isolated BST Power Supply and Telecommunications, Medical Patient Monitoring and Isolation, Battery Management System (BMS) Communication.
Automotive HEV/EV Powertrain Isolation
The ISO7762QDWQ1 isolates IOUs, PLC, PLC control domain modules between a 400-V/800-V traction inverter and the low-voltage body domain. With 100 Mbps signaling and 85 kV/us CMTI, it tolerates the 50+ kV/us dv/dt from SiC and IGBT switching. AEC-Q100 qualification makes it drop-in for OBC, traction, and DC-DC stage isolation.
Рекомендуется
Industrial Motor Drive and Servo
The ISO7762QDWQ1 provides 5000 Vrms reinforced isolation for industrial servo/motor-drive systems where 24 V logic must interface with 480-690 V three-phase inverters. Its 100 Mbps bandwidth supports multi-axis EtherCAT and CAN FD backbones, while 85 kV/us CMTI ensures noise-free isolation under high-dv/dt switching. The wide-body SOIC package provides 8 mm creepage required for VDE 0884-11 reinforced 800-V systems.
Рекомендуется
Solar Inverter and Photovoltaic System
In photovoltaic (PV) string inverters, the ISO7762QDWQ1 isolates IOUs, IOUs between 1500-V DC string inputs and low-voltage control. With reinforced VDE 0884-11 insulation and 8 mm creepage SOIC wide-body package, it meets 1500-V DC string inverter safety. The 100 Mbps data rate supports Modbus RTU, CAN, and SPI isolation for MPPT and inverter control. AEC-Q100 also makes it suitable for energy storage and isolation applications.
Рекомендуется
Isolated BST Power Supply and Telecommunications
In 48-V telecom rectifier and server PSU applications, the ISO7762QDWQ1 provides reinforced isolation for primary-secondary digital control interfaces including PMBus, I2C, SPI, and UART. The 100 Mbps data rate supports high-speed telemetry across 1500-V reinforced isolation barrier. The 2.25-V to 5.5-V supply tolerance allows direct interfacing to logic-level controllers without level shifters.
Рекомендуется
Medical Patient Monitoring and Isolation
In medical patient monitoring systems requiring 5000 Vrms patient isolation per IEC 60601-1, the ISO7762QDWQ1 provides reinforced digital isolation between patient-connected circuits and host equipment. The capacitive isolation barrier eliminates optocoupler aging concerns. The 100 Mbps data rate supports real-time ECG/SPO2 data transfer with 11 ns typical propagation delay. AEC-Q100 grade also makes it suitable for medical transportation applications.
Рекомендуется
Battery Management System (BMS) Communication
In automotive 400-V to 800-V Battery Management Systems, the ISO7762QDWQ1 provides reinforced isolation for daisy-chained BMS ISO2171xx communication between 96-cell battery stacks and the vehicle BMS controller. The 100 Mbps data rate supports high-speed daisy-chain telemetry, and the wide-body SOIC package offers 8 mm creepage for high-voltage battery packs. AEC-Q100 qualified with reinforced insulation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ISO7762QDWQ1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ISO7762FQDWRQ1 | ISO7762QDBQ1 | ISO7761QDWQ1 | ISO7742QDWQ1 |
|---|---|---|---|---|---|
| Package | 16-SOIC wide-body (DWQ) | 16-SOIC wide-body (DWQ) - same | 16-SSOP (DBQ) | 16-SOIC wide-body (DWQ) - same | 16-SOIC wide-body (DWQ) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Number of Channels | 6 | 6 | 6 | 6 | 4 |
| Channel Configuration | 4F/2R | 4F/2R | 4F/2R | 5F/1R | 2F/2R |
| Data Rate (max) | 100 Mbps | 100 Mbps | 100 Mbps | 100 Mbps | 25 Mbps |
| Isolation Voltage (RMS) | 5000 Vrms | 5000 Vrms | 5000 Vrms | 5000 Vrms | 3000 Vrms |
| CMTI (min) | 85 kV/us | 100 kV/us | 85 kV/us | 85 kV/us | 25 kV/us |
| AEC-Q100 Grade | AEC-Q100 Qualified | AEC-Q100 Qualified | AEC-Q100 Qualified | AEC-Q100 Qualified | AEC-Q100 Qualified |
Ключевые отличия
- Automotive-grade reinforced 5000 Vrms isolation with 100 Mbps speed (против ISO7742QDWQ1)
- Highest CMTI (85 kV/us min) in TI 6-channel automotive isolator family (против ISO7742QDWQ1)
- Wide-body SOIC package with 8 mm creepage for reinforced 800-V systems (против ISO7762QDBQ1)
Заметки по проектированию
Estimated: Provide 0.1 uF ceramic bypass capacitors within 2 mm of each VCC1/VCC2 pin, and a 4.7 uF to 10 uF bulk capacitor on each supply rail. The ISO7762QDWQ1 draws approximately 14 mA at 100 Mbps with 5 V supply on both sides per TI datasheet; insufficient decoupling can cause data corruption at high CMTI events.
Maintain at least 8 mm of PCB-to-creepage between side-1 and side-2 copper per VDE 0884-11 reinforced insulation. Per TI datasheet, the SOIC wide-body (DWQ) package provides 8 mm of internal clearance, but PCB layout must not reduce this. Do not route any side-1 trace within 8 mm of any side-2 trace, including internal layer signals. A PCB cutout or moat under the device helps meet reinforced insulation clearance in dense layouts.
The 85 kV/us CMTI of the ISO7762QDWQ1 ensures reliable operation in high-dv/dt environments such as SiC and IGBT gate drivers. Per TI datasheet, slow input slew rates below 1 V/us may cause output instability; ensure the input signal has rise/fall times below 1 us or place an external RC network. For SPI/CAN FD applications, series termination at the isolator output reduces reflections and EMI.
Do not power side-1 (VCC1) and side-2 (VCC2) from the same supply if the two domains need galvanic isolation - both sides must be independently powered from isolated rails. Per TI datasheet, leave unused inputs tied to VCC or GND through 1 kohm to 10 kohm resistors. The EN pin logic level determines default output on power-up; verify sequencing matches your system requirements.
Информация о соответствии
AEC-Q100 qualified for automotive. UL 1577-1 recognized 5000 Vrms. VDE 0884-11 reinforced insulation certified per TI datasheet.
