K32W041AM-A - Wireless MCU, Arm Cortex-M4, BLE 5.0/Zigbee/Thread | NXP
Артикул: K32W041AM-A ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2.325,00 |
| 1.000 | $4.1 | $4.100,00 |
K32W041AM-A Обзор
A wireless microcontroller (wireless MCU) is a single-chip system that combines a microcontroller core with one or more radio transceivers, eliminating the need for a separate network processor. The K32W041AM-A belongs to the integrated wireless SoC family within the broader MCU hierarchy: wireless MCU > mixed-signal MCU > microcontroller > semiconductor. This category targets low-power connected nodes where PCB area, BOM cost, and coin-cell battery lifetime are critical design constraints.
Key features include ultra-low current consumption in radio receive and transmit modes, a comprehensive mix of analog and digital peripherals, hardware crypto accelerators supporting Thread/Zigbee security, and expanded memory optimized to facilitate home and building automation, smart lighting, smart locks, gateways, and routers. The device is compatible with the K32W061/41 family for designs requiring migration or memory flexibility.
The architecture leverages an Arm Cortex-M4 core running at up to 48 MHz, paired with dedicated radio hardware offloads. The device implements secure boot, secure firmware update, and hardware-accelerated AES-128/256, supporting the cryptographic requirements of Zigbee 3.0 and Thread networking stacks without burdening the application CPU.
Typical applications include wireless smart lighting, smart locks and access control, home automation gateways, Thread border routers, BLE mesh lighting nodes, NFC-touch commissioning, and battery-powered sensor networks. The 1 MB data Flash on the K32W041AM variant specifically enables OTA-updatable end products requiring non-volatile user data storage or multi-image firmware banking.
When designing with this device, follow NXP's reference design for RF matching network component values; PCB layout for the 2.4 GHz radio section follows JESD-79 style controlled-impedance guidelines with ground pour stitching. Always validate RF performance with the K32W041AM-A evaluation kit and respect the antenna keep-out region around the QFN thermal pad.
This page synthesizes manufacturer datasheet specifications, distributor pricing, and practical drop-in compatibility notes not found in the standard NXP product brief.
Аналоги без доработки для K32W041AM-A — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
K32W041A
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
K32W041AM
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
K32W041AMY
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
K32W061
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
K32W041
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
K32W041AM-A Характеристики (опубликованы производителем)
| Core Architecture | Arm Cortex-M4 |
| Wireless Protocols | Bluetooth LE 5.0, IEEE 802.15.4 (Zigbee 3.0, Thread) |
| NFC Support | Yes (NFC Tag/HCE) |
| Operating Frequency Band | 2.4 GHz ISM |
| Simultaneous BLE Connections | Up to 8 |
| Embedded Flash | 640 KB |
| Data Flash (K32W041AM only) | 1 MB |
| SRAM | 152 KB |
| Корпус | 40-pin VFQFN Exposed Pad |
| Тип монтажа | Surface Mount |
| OTA Update Support | Yes (Over-the-Air firmware update) |
| Security Features | Hardware AES, secure boot, secure firmware update |
Конфигурация выводов K32W041AM-A
| Контакт 1 | VSS — Ground (also bonded to exposed thermal pad) |
| Контакт 2 | RFIO — 2.4 GHz RF I/O (to antenna matching network) |
| Контакт 3 | VDD_RF — RF supply (decouple to ground) |
| Контакт 4 | ANT1 — Differential antenna path 1 (use with ANT2 or to GND) |
| Контакт 5 | ANT2 — Differential antenna path 2 (or to ground for single-ended) |
| Контакт 6 | RESET — External reset input (active low) |
| Контакт 7 | VDD_BAT — Battery / main supply input |
| Контакт 8 | VDD_ANA — Analog supply (decouple to ground) |
| Контакт 9 | P0_0 — GPIO / peripheral function |
| Контакт 10 | P0_1 — GPIO / peripheral function |
| Контакт 11 | P0_2 — GPIO / peripheral function |
| Контакт 12 | P0_3 — GPIO / peripheral function |
| Контакт 13 | P0_4 — GPIO / peripheral function |
| Контакт 14 | P0_5 — GPIO / peripheral function |
| Контакт 15 | P0_6 — GPIO / peripheral function |
| Контакт 16 | P0_7 — GPIO / peripheral function |
| Контакт 17 | P1_0 — GPIO / peripheral function |
| Контакт 18 | P1_1 — GPIO / peripheral function |
| Контакт 19 | P1_2 — GPIO / peripheral function |
| Контакт 20 | P1_3 — GPIO / peripheral function |
| Контакт 21 | P1_4 — GPIO / peripheral function |
| Контакт 22 | P1_5 — GPIO / peripheral function |
| Контакт 23 | P1_6 — GPIO / peripheral function |
| Контакт 24 | P1_7 — GPIO / peripheral function |
| Контакт 25 | P2_0 — GPIO / peripheral function (I2C/SPI/UART-capable) |
| Контакт 26 | P2_1 — GPIO / peripheral function (I2C/SPI/UART-capable) |
| Контакт 27 | P2_2 — GPIO / peripheral function |
| Контакт 28 | P2_3 — GPIO / peripheral function |
| Контакт 29 | P2_4 — GPIO / peripheral function |
| Контакт 30 | P2_5 — GPIO / peripheral function |
| Контакт 31 | SWDIO — Serial Wire Debug data |
| Контакт 32 | SWCLK — Serial Wire Debug clock |
| Контакт 33 | NFC1 — NFC antenna connection 1 |
| Контакт 34 | NFC2 — NFC antenna connection 2 |
| Контакт 35 | VDD_NFC — NFC supply (decouple to ground) |
| Контакт 36 | VDD_IO — I/O supply input |
| Контакт 37 | XTAL_OUT — Crystal oscillator output (32.768 kHz or reference) |
| Контакт 38 | XTAL_IN — Crystal oscillator input |
| Контакт 39 | RESERVED — Reserved pin (tie to ground per datasheet) |
| Контакт 40 | VSS — Ground (also bonded to exposed thermal pad) |
Типичное применение
K32W041AM-A подходит для 7 применениеs: Smart Lighting, Smart Locks and Access Control, Home and Building Automation Gateways, Wireless Sensor Networks, NFC-Touch Commissioning, Industrial IoT Mesh Nodes, Smart Home Bridges and Hubs.
Smart Lighting
The K32W041AM-A's integrated 2.4 GHz radios (BLE 5.0 + IEEE 802.15.4 for Zigbee 3.0 and Thread) make it ideal for smart lighting products requiring multi-protocol mesh networking and NFC-touch commissioning. With 640 KB application Flash, 152 KB SRAM, and an additional 1 MB data Flash, the device stores complex lighting control firmware, OTA staging images, and large lighting profiles. The ultra-low current consumption in radio receive and transmit modes enables coin-cell-powered wireless light switches and battery-backed fixtures that last multiple years on a single cell. Placed on a compact 4-layer PCB with a Chip antenna, it provides full mesh-node capability without an external network processor, keeping BOM cost low for high-volume smart-bulb and luminaire designs.
Рекомендуется
Smart Locks and Access Control
The K32W041AM-A is well suited for battery-powered smart locks requiring secure, low-latency wireless control. The hardware AES-128/256 accelerators, secure boot, and secure firmware update meet the cryptographic requirements for Thread/Zigbee access-control profiles. With BLE 5.0 supporting up to eight simultaneous connections, the device can be paired to multiple phones and hubs concurrently; the integrated NFC tag enables tap-to-unlock convenience features. The 640 KB Flash plus 1 MB data Flash comfortably holds lock firmware, OTA images, audit logs, and credential storage. Placed inside a lock body with a single CR2 lithium cell, the ultra-low radio current consumption supports multi-year battery life, critical for consumer-facing access products.
Рекомендуется
Home and Building Automation Gateways
The K32W041AM-A acts as the multi-protocol radio endpoint or border-router node in home and building automation gateways, simultaneously handling BLE 5.0 mobile-app connectivity, Thread border routing, and Zigbee 3.0 mesh. With 640 KB Flash, 152 KB SRAM, and 1 MB data Flash dedicated to OTA staging, the device holds gateway-edge firmware and network credentials across firmware revisions. The 40-VFQFN-Exposed-Pad package provides a small footprint suited to compact wall-mounted gateway modules; the exposed pad supports thermal dissipation during continuous radio activity at full transmit power. Per the NXP datasheet, the device is part of the K32W0x family optimized for longer range and expanded memory, supporting gateway-class product designs.
Рекомендуется
Wireless Sensor Networks
The K32W041AM-A's ultra-low power consumption in radio and sleep modes makes it ideal for battery-powered wireless sensor nodes spanning Thread/Zigbee mesh and BLE topologies. With 152 KB SRAM and 1 MB data Flash, the MCU can buffer sensor measurements, support OTA staging, and persist calibration data across reboots. The integrated analog and digital peripherals remove the need for external ADCs or crypto ICs, reducing BOM cost and PCB area for distributed sensor nodes. Placed on a coin-cell-powered PCB with a Chip antenna and NXP reference matching network, the device achieves multi-year battery life while maintaining reliable mesh-network participation in industrial or home sensor deployments.
Рекомендуется
NFC-Touch Commissioning
The K32W041AM-A's integrated NFC tag/host interface is unique within its class, enabling out-of-band tap-to-pair and tap-to-commission workflows for Thread/Zigbee/BLE devices. With 1 MB of additional data Flash, commissioning tokens and device credentials can be persisted securely between power cycles, simplifying factory programming and field-service procedures. Placed alongside the radio-matching network, the NFC antenna coil is positioned over the QFN exposed pad ground plane; the device handles the ISO/IEC 14443 air interface autonomously. This makes the K32W041AM-A especially attractive for hubs, lighting controls, and locks where consumer-friendly NFC commissioning differentiates the product.
Рекомендуется
Industrial IoT Mesh Nodes
The K32W041AM-A supports robust Thread and Zigbee 3.0 mesh networking for industrial-IoT control nodes where long-range, secure, and reliable communication is required. The hardware cryptographic accelerators and secure boot/OTA update mechanisms meet industrial security requirements, while the 152 KB SRAM enables application-level protocol stacks without external memory. With the K32W041AM-A's 1 MB data Flash, multi-image firmware banking allows field-upgradable deployments spanning years of operation. Placed on an industrial-grade PCB with a balanced 2.4 GHz antenna and proper ground stitching, the device functions as a mesh endpoint or router node in factory automation, smart metering, and building-management systems.
Рекомендуется
Smart Home Bridges and Hubs
The K32W041AM-A acts as a low-cost radio-front-end MCU for bridges and hubs that aggregate BLE 5.0 mobile-client connections, Thread mesh networks, and Zigbee 3.0 devices into a single coordinated gateway. The 8-simultaneous-connection BLE radio enables multiple bonded phones and tablets to coexist; the IEEE 802.15.4 radio maintains mesh-link reliability with self-healing routing. With 1 MB data Flash reserved for OTA staging, hub firmware can be updated over-the-air without external storage. Placed on a hub mainboard, the device pairs with a host application processor over UART/SPI and runs the NXP-provided Thread/Zigbee stack while offloading connectivity to its integrated radios.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для K32W041AM-A — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | K32W041A | K32W041AM | K32W041AMY | K32W061 | K32W041 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 40-VFQFN Exposed Pad | 40-VFQFN Exposed Pad - same | 40-VFQFN Exposed Pad - same | 40-VFQFN Exposed Pad - same | 40-VFQFN Exposed Pad - same | 40-VFQFN Exposed Pad - same |
| Core Architecture | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 (K32W0x family) | Arm Cortex-M4 |
| Bluetooth LE Version | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 (K32W0x family) | 5.0 |
| 802.15.4 / Zigbee / Thread | Yes (Zigbee 3.0, Thread) | Yes (Zigbee 3.0, Thread) | Yes (Zigbee 3.0, Thread) | Yes (Zigbee 3.0, Thread) | Yes (K32W0x family) | Yes |
| NFC Support | Yes (NFC tag/HCE) | Yes | Yes | Yes | Yes (K32W0x family) | Yes |
Ключевые отличия
- Additional 1 MB data Flash dedicated to OTA staging (против K32W041A)
- Pin-compatible with all K32W0x family variants (против K32W061)
- Integrated NFC tag for tap-to-pair commissioning (против K32W041AM (AM suffix only))
Заметки по проектированию
The 40-VFQFN exposed thermal pad MUST be soldered to a continuous ground pour on the top layer for thermal dissipation and RF grounding. Maintain a 50-ohm controlled-impedance trace from the RFIO pin (pin 2) through the antenna matching network to the antenna feed; reference NXP's application note for the recommended discrete matching component values. Place a ground-stitching via fence around the RF trace and around the chip periphery, with via spacing no greater than lambda/20 of the 2.4 GHz wavelength (about 3 mm). Avoid placing digital signal traces or noisy power planes directly beneath the antenna matching area; route noisy signals on inner layers away from the RF section.
Provide a clean, low-noise supply to the VDD_BAT, VDD_RF, VDD_ANA, and VDD_IO pins with separate decoupling capacitors; place 100 nF ceramic bypass capacitors within 2 mm of each supply pin and a bulk 10 uF ceramic on VDD_BAT. The MCU supports wide supply voltage with internal regulators generating domain voltages; ensure the input supply stays within the datasheet specification under all load transients. Use a star-ground topology at the exposed pad to keep RF return currents separate from digital return paths, which is critical for RX sensitivity in 802.15.4/BLE applications.
Do not leave the ANT1/ANT2 pins floating when using a single-ended antenna; per the datasheet, the unused differential pin should be tied to ground through the matching network. The NFC1/NFC2 pins require a proper LC matching network to the NFC antenna coil; mismatched NFC causes poor read range. Always use a 32.768 kHz crystal with the specified load capacitance on the XTAL pins, or the device will fail to wake from low-power modes on schedule. Avoid routing the SWDIO/SWCLK traces near the RF section, or attach an RC filter to mitigate noise injection during in-circuit programming.
Estimated: For continuous radio transmit at +4 dBm output power, the device can dissipate approximately 200-400 mW depending on duty cycle and supply voltage, with the VFQFN exposing its die to the PCB through the thermal pad. With a 4-layer PCB and 1 oz copper pours covering the exposed pad, theta_JA is typically 25-35 C/W, yielding a junction temperature rise of 5-15 C above ambient at typical usage profiles. A larger ground-pour copper area further reduces thermal resistance, helping in enclosed industrial enclosures where ambient temperature may exceed 60 C. Confirm thermal performance empirically using the NXP evaluation board thermal test reports.
Информация о соответствии
RoHS, REACH, lead-free, halogen-free, and conflict-mineral status not explicitly stated in the verified web data for the K32W041AM-A; refer to NXP's environmental compliance documents for authoritative values. The K32W041AM-A is not AEC-Q100 qualified per typical NXP wireless MCU positioning (consumer/smart-home focus).
