KSZ8775CLXCC - 5-Port 10/100 Ethernet Switch | Microchip
Артикул: KSZ8775CLXCC ✓ АктивенKSZ8775CLXCC Обзор
An Ethernet switch is a semiconductor that connects multiple internal endpoints to an Ethernet network while providing Layer 2 frame forwarding, port management, and media access control. The KSZ8775 belongs to the Ethernet switch hierarchy, combining an Ethernet controller, integrated 10/100Base-T and 10/100/1000Base-T transceiver functions, and flexible serial host interfaces in one package.
The principal feature set includes five-port switching, Layer 2 management, three dedicated 10/100 Mbps copper ports, an RMII interface on Port 4, and support for RGMII, GMII, MII, and RMII host connections. Integrating the switch and physical-layer functions reduces the number of discrete components required around a network processor, helping simplify board layout in industrial, communications, and embedded systems.
The KSZ8775CLX is positioned as a cost-optimized switching solution rather than a general-purpose host processor. Its configurable digital interfaces allow the same device family to accommodate processors with different media-independent interface requirements. The 80-LQFP package provides 80 external connections for power, clock, management, serial interfaces, copper ports, status indication, and configuration, making careful pin assignment and high-speed layout essential.
Typical uses include industrial Ethernet equipment, embedded routers, network appliances, print servers, machine controllers, and communications equipment requiring several copper ports alongside a high-speed processor interface. The integrated 10/100 Mbps copper ports suit legacy 100BASE-TX links, while the additional high-speed port supports designs that need greater uplink bandwidth.
Designers should use the manufacturer pin-description table when assigning the 80-LQFP footprint and should keep RMII, RGMII, GMII, and MII clocking and signal-routing requirements under consideration. Differential copper routing, controlled clock topology, solid ground-plane continuity, and compliance-focused magnetics integration are central to achieving reliable Ethernet performance.
This product page organizes the manufacturer positioning, exact package information, interface details, replacement-screening constraints, and application guidance into one engineering reference. It also distinguishes verified drop-in replacements from broader functional equivalents so procurement and PCB redesign decisions are based on package and pin compatibility rather than similar Ethernet functionality alone.
Аналоги без доработки для KSZ8775CLXCC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиKSZ8775CLXCC Максимальные параметры и электрические характеристики
| Product Type | Layer 2-managed Ethernet switch |
| Total Port Count | 5 ports |
| 10/100 Mbps Copper Ports | 3 ports |
| Port 4 Interface | RMII |
| Supported Host Interfaces | MII, RMII, RGMII, and GMII |
| Low-Speed Ethernet Support | 10/100 Mbps |
| High-Speed Port Support | 10/100/1000 Mbps |
| Managed Layer | Layer 2 |
| Корпус | 80-LQFP (10 mm x 10 mm) |
| Package Pin Count | 80 pins |
| Тип монтажа | Surface mount |
| Product Series | KSZ8775 |
| Device Suffix | CLXCC |
| Maximum Ethernet Data Rate | 1000 Mbps |
| Ethernet Physical Layer | 10/100Base-T and 10/100/1000Base-T |
Руководство по цоколевке KSZ8775CLXCC в корпусе 80 pins
Цоколевка для KSZ8775CLXCC (корпус 80 pins). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для KSZ8775CLXCC.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
KSZ8775CLXCC подходит для 6 применениеs: Industrial Ethernet Controller Equipment, Embedded Network Appliance, Machine Control and Automation, Print Server and Network Peripheral, Communications Gateway, Embedded Router and Network Interface.
Industrial Ethernet Controller Equipment
The KSZ8775CLXCC fits industrial controllers that need several local 10/100 Mbps copper links plus a higher-speed network connection. Its three 10/100 ports can serve local sensors, service interfaces, or peer controllers, while the 10/100/1000-capable fifth port supports an uplink. Layer 2 management reduces the external switching component count, and MII, RMII, RGMII, or GMII selection lets the design align with the processor interface. The design must still accommodate the device's 80-LQFP footprint, supply requirements, reference clocking, and differential copper routing.
Embedded Network Appliance
The KSZ8775CLXCC is appropriate for compact gateways and embedded network appliances that combine multiple copper Ethernet connections with a host processor. Three dedicated 10/100 Mbps ports can provide direct device access, management, or service connectivity, while the fifth port adds 10/100/1000-capable uplink bandwidth. Integrating a Layer 2-managed switch and physical-layer functions in one 80-LQFP device simplifies the board compared with using separate switch and PHY components. Interface timing, clock source selection, and magnetics design remain critical implementation considerations.
Machine Control and Automation
The five-port KSZ8775CLXCC can serve as the network hub in machine-control and factory-automation equipment where controllers, sensors, human-machine interfaces, and service equipment need a shared Layer 2 network. Three 10/100 Mbps copper ports support conventional industrial Ethernet links, and the remaining ports provide RMII and 10/100/1000-capable connectivity. This mixed-port arrangement allows one switch to connect both low-speed legacy devices and a faster control or management processor. Validate the industrial temperature requirement, grounding strategy, isolation boundaries, and connector arrangements before production release.
Print Server and Network Peripheral
The KSZ8775CLXCC can consolidate wired connectivity in a print server or other network peripheral that requires management access, upstream networking, and multiple device-facing ports. Its three 10/100 Mbps copper ports support legacy 100BASE-TX equipment, while the fifth 10/100/1000-capable port can provide a faster uplink when the host system supports it. The RGMII, GMII, MII, and RMII options allow interface selection according to the embedded controller. Designers should budget for magnetics, termination, controlled clock routing, and the board area required by the 80-LQFP package.
Communications Gateway
The KSZ8775CLXCC suits communications gateways that need to aggregate several Ethernet endpoints and connect them to a host processor. A processor using RMII can attach through Port 4, while the three 10/100 Mbps ports connect field devices, management terminals, or service equipment. The remaining 10/100/1000-capable port supports a higher-bandwidth uplink. The Layer 2-managed architecture supports integration of Ethernet switching with the gateway processor, but firmware configuration, port priorities, and interface timing must be coordinated across both devices for predictable traffic delivery.
Embedded Router and Network Interface
The KSZ8775CLXCC can support an embedded router or dual-network interface design requiring multiple wired connections and a high-speed host path. The three 10/100 Mbps copper ports handle endpoint connections, while MII, RMII, RGMII, and GMII interfaces support different processor-side architectures. The 10/100/1000-capable fifth port can be assigned to a backbone connection where 1 Gbps operation is required and the full signal path supports it. Exact port modes, clock relationships, and management behavior should be configured from the manufacturer documentation before PCB implementation.
Справочные инженерные данные для KSZ8775CLXCC — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | Microchip Technology |
| Package | 80-LQFP (10 mm x 10 mm) |
| Product Type | Layer 2-managed Ethernet switch |
| Total Port Count | 5 ports |
| 10/100 Mbps Copper Ports | 3 ports |
| High-Speed Port | 10/100/1000 Mbps |
| Port 4 Interface | RMII |
| Supported Host Interfaces | MII, RMII, RGMII, and GMII |
| Management Layer | Layer 2 |
| Pin Count | 80 pins |
Заметки по проектированию
Use the manufacturer's 80-LQFP land pattern and pin-description table as the authority for footprint assignment. The KSZ8775CLXCC combines multiple high-speed digital interfaces with five Ethernet ports, so route RMII, RGMII, GMII, and MII groups according to their clock topology and keep clock traces short and isolated from differential copper pairs. Do not substitute a generic 80-pin LQFP drawing without checking pad dimensions, pin-1 orientation, and exposed-pad requirements.
Plan the copper Ethernet channels as controlled-impedance differential pairs, with continuous reference planes and avoidance of plane splits beneath the pairs. Keep PHY-side traces short and follow the manufacturer guidance for magnetics, line-side surge protection, and separation between copper and other high-current paths. The three 10/100 ports and one 10/100/1000-capable port should be reviewed individually because their channel requirements are not necessarily identical.
Derive each supply rail from the datasheet power-supply diagram and place required decoupling capacitors close to the corresponding package pins. Verify supply sequencing, startup behavior, and the voltage levels required by the selected MII, RMII, RGMII, or GMII host interface. Decoupling alone is not a substitute for a complete power-plane layout; provide low-impedance paths from supply sources to the IC and preserve adequate copper area for thermal performance.
Do not treat a similarly featured Ethernet switch as a drop-in replacement merely because it also offers five ports. The KSZ8775CLXCC uses an 80-LQFP footprint, and functional equivalents can use different packages, pin assignments, clock arrangements, or power requirements. Before replacement, compare the manufacturer pin tables, interface timing, management registers, PHY capabilities, and copper-media configuration one item at a time.
Информация о соответствии
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration appears in the manufacturer page snippet or distributor records. AEC-Q100 is not applicable to the standard industrial Ethernet-switch product identified by this ordering code.