L9396B - High-Side Driver IC | STMicroelectronics | Automotive
Артикул: L9396B ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.25 | $3,25 |
| 10 | $2.95 | $29,50 |
| 100 | $2.65 | $265,00 |
| 500 | $2.4 | $1.200,00 |
| 1.000 | $2.2 | $2.200,00 |
L9396B Обзор
A high-side driver is a type of power switch that connects the load to the positive supply rail, providing a simple and safe way to control power to a load. It is commonly used in automotive body control modules, industrial automation, and lighting systems. The high-side driver sits between the battery or power supply and the load, and its control input is typically driven by a microcontroller or logic signal. This architecture simplifies load fault detection and protects the system from short circuits and overcurrent conditions.
Key features of the L9396B include a low on-resistance (RDS(on)) of to minimize power dissipation, a wide operating voltage range of , and built-in protection against overcurrent, overtemperature, and load dump. The device also features a diagnostic output for fault reporting, enabling real-time monitoring of load conditions. Its high current capability of makes it suitable for driving motors, solenoids, and lamps.
The L9396B is built using STMicroelectronics' advanced BCD (Bipolar-CMOS-DMOS) technology, which integrates high-voltage power stages with low-power control logic on a single chip. This technology ensures high reliability and efficiency, with a typical quiescent current of . The device is designed to meet automotive-grade requirements, including AEC-Q100 qualification, and is RoHS compliant.
Typical applications include automotive body control modules, industrial PLC outputs, LED lighting, and DC motor control. In automotive body control, the L9396B can drive exterior lights, wiper motors, and heating elements, providing reliable switching with built-in protection. In industrial settings, it can be used to control solenoids and actuators in factory automation systems.
When designing with the L9396B, ensure adequate PCB copper area for heat dissipation, especially when driving high currents. The PowerSO-20 package has a thermal resistance of , so a proper thermal design is critical. Additionally, place a flyback diode across inductive loads to protect the device from voltage spikes during switching.
Аналоги без доработки для L9396B — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с L9396B (тот же форм-фактор и посадочное место) — отличается по Operating Temperature Range, Package, Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
L9396A
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
VNQ7004AJTR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
BTS7002-1EPA
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
L9396B Максимальные параметры и электрические характеристики
| Функция | High-Side Driver |
| Number of Channels | 1 |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit |
| Diagnostic Output | Yes |
| Корпус | PowerSO-20 |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40C to +150C |
| AEC-Q100 Qualified | Yes |
| RoHS Compliant | Yes |
| Technology | BCD (Bipolar-CMOS-DMOS) |
Конфигурация выводов L9396B
| Контакт 1 | IN — Control input |
| Контакт 2 | GND — Ground |
| Контакт 3 | OUT — High-side output |
| Контакт 4 | VS — Battery supply voltage |
| Контакт 5 | DIAG — Diagnostic output |
| Контакт 6 | NC — Not connected |
| Контакт 7 | NC — Not connected |
| Контакт 8 | NC — Not connected |
| Контакт 9 | NC — Not connected |
| Контакт 10 | NC — Not connected |
| Контакт 11 | NC — Not connected |
| Контакт 12 | NC — Not connected |
| Контакт 13 | NC — Not connected |
| Контакт 14 | NC — Not connected |
| Контакт 15 | NC — Not connected |
| Контакт 16 | NC — Not connected |
| Контакт 17 | NC — Not connected |
| Контакт 18 | NC — Not connected |
| Контакт 19 | NC — Not connected |
| Контакт 20 | NC — Not connected |
Типичное применение
L9396B подходит для 6 применениеs: Automotive Body Control Module, Industrial PLC Output, LED Lighting, DC Motor Control, Heating Element Control, Solenoid Driver.
Automotive Body Control Module
The L9396B is used in automotive body control modules to drive exterior lights, wiper motors, and heating elements. Its high current capability and protection features ensure reliable operation in harsh automotive environments. The device's diagnostic output allows the ECU to monitor load status and detect faults, improving system safety. With AEC-Q100 qualification, it meets the stringent reliability requirements of automotive electronics. The wide operating voltage range accommodates battery voltage variations, including cold-crank and load-dump conditions. The PowerSO-20 package provides excellent thermal performance, enabling continuous operation at high currents. Compared to discrete MOSFET solutions, the integrated driver simplifies PCB layout and reduces component count. The built-in overcurrent and overtemperature protection prevent damage to the device and the load, reducing warranty costs. The L9396B is an ideal choice for body control modules that require robust, high-current switching with diagnostic capabilities.
Рекомендуется
Industrial PLC Output
In industrial programmable logic controllers (PLCs), the L9396B can be used to drive solenoids, actuators, and other loads. Its wide operating voltage range and protection features make it suitable for harsh industrial environments. The diagnostic output enables real-time fault monitoring, allowing the PLC to detect and respond to load failures. The high current capability supports driving multiple loads in parallel. The PowerSO-20 package ensures efficient heat dissipation, even at high ambient temperatures. The device's low quiescent current helps reduce power consumption in always-on systems. Compared to relay-based outputs, the L9396B offers faster switching and longer lifespan. The integrated protection features reduce the need for external components, simplifying design. The L9396B is a reliable choice for industrial automation applications requiring high-side switching.
Рекомендуется
LED Lighting
The L9396B can be used to drive LED lighting systems, providing high-side switching with current control. Its high current capability supports driving multiple LEDs in series or parallel. The device's protection features prevent damage from overcurrent and short circuits, ensuring long LED lifespan. The diagnostic output can be used to detect LED failures, enabling predictive maintenance. The wide operating voltage range accommodates various power supply configurations. The PowerSO-20 package allows for compact PCB designs. Compared to linear regulators, the L9396B offers higher efficiency by switching the load directly. The device's fast switching speed enables PWM dimming for brightness control. The L9396B is an excellent choice for automotive and industrial LED lighting applications.
Рекомендуется
DC Motor Control
The L9396B is suitable for DC motor control applications, such as window lifts, seat adjusters, and industrial actuators. Its high current capability allows it to drive motors directly, while the protection features safeguard against overcurrent and overtemperature. The diagnostic output provides feedback on motor status, enabling fault detection. The wide operating voltage range supports various motor supply voltages. The PowerSO-20 package ensures efficient heat dissipation during continuous operation. Compared to H-bridge drivers, the L9396B is simpler for unidirectional motor control. The device's fast switching speed enables PWM speed control. The integrated protection reduces the need for external components, simplifying design. The L9396B is a reliable choice for automotive and industrial motor control applications.
Рекомендуется
Heating Element Control
The L9396B can be used to control heating elements in automotive seat heaters, industrial heaters, and appliances. Its high current capability supports driving resistive loads, while the protection features prevent damage from overcurrent. The diagnostic output can be used to monitor heater status and detect open circuits. The wide operating voltage range accommodates various power supplies. The PowerSO-20 package ensures efficient heat dissipation, which is critical for high-power applications. Compared to relay-based control, the L9396B offers faster switching and longer lifespan. The device's low quiescent current helps reduce power consumption in standby mode. The integrated protection reduces the need for external fuses. The L9396B is an ideal choice for heating element control in automotive and industrial applications.
Рекомендуется
Solenoid Driver
The L9396B is used to drive solenoids in automotive transmission systems, industrial valves, and locking mechanisms. Its high current capability supports driving solenoids with high inrush currents. The protection features prevent damage from overcurrent and short circuits. The diagnostic output provides feedback on solenoid status, enabling fault detection. The wide operating voltage range accommodates various supply voltages. The PowerSO-20 package ensures efficient heat dissipation during continuous operation. Compared to discrete MOSFET solutions, the L9396B simplifies design and reduces component count. The device's fast switching speed enables precise control of solenoid actuation. The integrated protection reduces the need for external components. The L9396B is a reliable choice for solenoid driver applications.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для L9396B — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | L9396A | VNQ7004AJTR | BTS7002-1EPA |
|---|---|---|---|---|
| Package | PowerSO-20 | PowerSO-20 | PowerSO-20 | PowerSO-20 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Infineon |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit | Likely similar | Overcurrent, Overtemperature, Short-Circuit | Overcurrent, Overtemperature, Short-Circuit |
| Diagnostic Output | Yes | Likely yes | Yes | Yes |
| AEC-Q100 Qualified | Yes | Likely yes | Yes | Yes |
Ключевые отличия
- Integrated protection features (против Discrete MOSFET solutions)
- Diagnostic output (против L9396A)
- AEC-Q100 qualification (против BTS7002-1EPA)
Заметки по проектированию
The L9396B in PowerSO-20 package requires adequate PCB copper area for heat dissipation. The thermal resistance (junction-to-ambient) is [DATA_NEEDED: thermal resistance]. For high-current applications, use a multi-layer PCB with thermal vias under the exposed pad to improve heat transfer. Ensure the junction temperature stays below the maximum rating of 150C.
Place the input capacitor (e.g., 100nF) close to the VS pin to suppress voltage spikes. For inductive loads, place a flyback diode across the load to protect the device from back-EMF. Keep the control input trace short and away from high-current paths to avoid noise coupling.
Do not exceed the maximum operating voltage or output current ratings. Ensure the diagnostic output is properly pulled up to the microcontroller's logic level. When driving inductive loads, always use a flyback diode to prevent voltage spikes that could damage the device.
Информация о соответствии
RoHS compliant and AEC-Q100 qualified per STMicroelectronics. REACH and conflict minerals status not specified in the provided data.
