L9970-TR - Automotive Dual H-Bridge Motor Driver | STMicroelectronics
Артикул: L9970-TR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.25 | $3,25 |
| 10 | $2.92 | $29,20 |
| 100 | $2.6 | $260,00 |
| 500 | $2.34 | $1.170,00 |
| 1.000 | $2.08 | $2.080,00 |
L9970-TR Обзор
A motor driver is an integrated circuit that translates low-power control signals from a microcontroller into the higher voltage and current levels required to drive electric motors. In the system hierarchy, a motor driver sits between the MCU and the motor, acting as a power amplifier and protection interface. It typically includes H-bridge topologies for bidirectional control, current sensing, and diagnostic feedback. Motor drivers are essential in automotive systems such as power windows, seat adjustment, mirror positioning, and HVAC actuators, where precise and reliable motor control is critical.
Key features of the L9970-TR include a wide operating voltage range of 5.5 V to 36 V, making it suitable for both 12 V and 24 V automotive electrical systems. Each H-bridge can source or sink up to 1.2 A continuous current, with peak current capability of 2 A. The device includes built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout, ensuring robust operation in harsh automotive environments. The PowerSO-20 package offers a low thermal resistance of 35 °C/W, enabling efficient heat dissipation without external heatsinks in moderate load conditions.
The L9970-TR utilizes a standard H-bridge architecture with four power MOSFETs per channel, controlled by logic-level inputs. The device supports both DC motor and stepper motor configurations, with the ability to control direction and speed via PWM signals. The integrated current sensing feature allows for closed-loop torque control, improving system efficiency and performance. The device is AEC-Q100 qualified, meeting the stringent reliability requirements of automotive applications.
Typical applications include automotive power windows, seat adjustment, mirror control, HVAC actuators, and industrial automation systems. The wide input voltage range and robust protection features make it ideal for use in 12 V and 24 V systems, where reliability and safety are paramount. The device can also be used in robotics and mechatronics applications requiring bidirectional motor control.
When designing with the L9970-TR, ensure adequate PCB copper area for thermal dissipation, especially when driving loads near the maximum current rating. Place decoupling capacitors close to the supply pins to minimize voltage transients. The device's enable and diagnostic pins allow for system-level fault monitoring, which is essential for safety-critical applications.
Аналоги без доработки для L9970-TR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с L9970-TR (тот же форм-фактор и посадочное место) — отличается по Package, Quiescent Current.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
L9970
✅ Прямая замена✓ В наличии
$1.6 / шт.
Открыть даташит →L9970-TR
✅ Прямая замена✓ В наличии
$2.08 / шт.
Открыть даташит →DRV8801
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
A4950
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
L9970-TR Максимальные параметры и электрические характеристики
| Supply Voltage Range | 5.5 V to 36 V |
| Output Current per Channel | 1.2 A continuous, 2 A peak |
| Number of H-Bridges | 2 |
| Выходная конфигурация | Dual H-bridge |
| Control Interface | Parallel logic inputs |
| PWM Frequency | Up to 20 kHz |
| On-Resistance (per MOSFET) | 0.5 ohm typical |
| Ток покоя | 5 mA typical |
| Тепловая защита | Yes |
| Защита от сверхтока | Yes |
| Undervoltage Lockout | Yes |
| Диапазон рабочих температур | -40°C to +150°C |
| Корпус | PowerSO-20 |
| Тип монтажа | Surface Mount |
| AEC-Q100 Qualified | Yes |
| RoHS Compliant | Yes |
Конфигурация выводов L9970-TR
| Контакт 1 | OUT1 — H-bridge 1 output |
| Контакт 2 | OUT2 — H-bridge 1 output |
| Контакт 3 | VS — Supply voltage |
| Контакт 4 | GND — Ground |
| Контакт 5 | IN1 — Control input for H-bridge 1 |
| Контакт 6 | IN2 — Control input for H-bridge 1 |
| Контакт 7 | EN1 — Enable for H-bridge 1 |
| Контакт 8 | DIAG1 — Diagnostic output for H-bridge 1 |
| Контакт 9 | OUT3 — H-bridge 2 output |
| Контакт 10 | OUT4 — H-bridge 2 output |
| Контакт 11 | VS — Supply voltage |
| Контакт 12 | GND — Ground |
| Контакт 13 | IN3 — Control input for H-bridge 2 |
| Контакт 14 | IN4 — Control input for H-bridge 2 |
| Контакт 15 | EN2 — Enable for H-bridge 2 |
| Контакт 16 | DIAG2 — Diagnostic output for H-bridge 2 |
| Контакт 17 | NC — No connect |
| Контакт 18 | NC — No connect |
| Контакт 19 | NC — No connect |
| Контакт 20 | NC — No connect |
Типичное применение
L9970-TR подходит для 6 применениеs: Automotive Power Windows, Seat Adjustment Systems, HVAC Actuators, Industrial Automation, Robotics, Mechatronics.
Automotive Power Windows
The L9970-TR drives DC motors for power windows, providing bidirectional control and protection. Its 1.2 A continuous output current and 36 V supply range handle window lift motors efficiently. The AEC-Q100 qualification ensures reliability in automotive environments. In a typical power window system, the L9970-TR is controlled by a body control module (BCM) via logic inputs, with PWM for speed control. The integrated overcurrent protection prevents motor stall damage, and thermal shutdown protects the device during prolonged operation. Compared to discrete H-bridge designs, the L9970-TR reduces component count and PCB area, improving system reliability.
Рекомендуется
Seat Adjustment Systems
The L9970-TR is used in seat adjustment systems to drive multiple DC motors for forward/backward, recline, and lumbar support. Its dual H-bridge configuration allows independent control of two motors, simplifying the design. The wide supply voltage range accommodates both 12 V and 24 V systems. In a seat adjustment module, the L9970-TR receives commands from a seat control unit, driving motors with PWM for smooth operation. The device's current sensing capability enables stall detection, preventing damage to the motor and mechanism. The PowerSO-20 package's thermal performance supports continuous operation under load.
Рекомендуется
HVAC Actuators
The L9970-TR drives DC motors in HVAC actuators for air flow control, temperature mixing, and mode selection. Its low on-resistance (0.5 ohm) minimizes power dissipation, improving energy efficiency in the vehicle. The device's protection features ensure reliable operation in the harsh under-dash environment. In an HVAC actuator, the L9970-TR is controlled by the climate control module, with position feedback from a potentiometer. The dual H-bridge allows driving two actuators simultaneously, reducing component count. The device's thermal shutdown prevents overheating during extended operation.
Рекомендуется
Industrial Automation
The L9970-TR is suitable for industrial automation applications such as conveyor belt control, valve actuation, and robotic arm movement. Its wide supply voltage range (5.5 V to 36 V) allows use in both 12 V and 24 V industrial systems. The device's robust protection features ensure reliable operation in industrial environments. In a conveyor system, the L9970-TR drives a DC motor with PWM speed control, with overcurrent protection preventing motor damage. The dual H-bridge configuration enables bidirectional control, allowing for forward and reverse operation. The PowerSO-20 package's thermal performance supports continuous operation in industrial settings.
Рекомендуется
Robotics
The L9970-TR is used in robotics for driving DC motors in wheeled robots, robotic arms, and actuators. Its dual H-bridge allows independent control of two motors, enabling differential drive for mobile robots. The device's PWM capability supports speed and direction control, essential for precise robot movement. In a mobile robot, the L9970-TR is controlled by an MCU, with PWM signals for motor speed and direction. The integrated current sensing enables torque control and obstacle detection. The device's compact PowerSO-20 package saves PCB space, making it ideal for space-constrained robot designs.
Рекомендуется
Mechatronics
The L9970-TR is applied in mechatronic systems such as automated valves, pumps, and positioning stages. Its wide supply voltage range and robust protection features make it suitable for various mechatronic applications. The device's dual H-bridge configuration allows driving two actuators independently, simplifying system design. In a mechatronic valve, the L9970-TR drives a DC motor to open and close the valve, with position feedback from a sensor. The device's overcurrent protection prevents damage during valve jams. The PowerSO-20 package's thermal performance supports continuous operation in industrial mechatronic systems.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для L9970-TR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | L9970 | DRV8801 | A4950 |
|---|---|---|---|---|
| Package | PowerSO-20 | PowerSO-20 | PowerSO-20 | PowerSO-20 |
| Brand | STMicroelectronics | STMicroelectronics | Texas Instruments | Allegro MicroSystems |
| Supply Voltage Range | 5.5 V to 36 V | 5.5 V to 36 V | 8 V to 36 V | 8 V to 40 V |
| Output Current per Channel | 1.2 A continuous | 1.2 A continuous | 1.5 A continuous | 1.5 A continuous |
| Number of H-Bridges | 2 | 2 | 2 | 2 |
| On-Resistance | 0.5 ohm | 0.5 ohm | 0.4 ohm | 0.6 ohm |
| AEC-Q100 Qualified | Yes | Yes | No | Yes |
| Price (1 pcs) | $3.25 | $3.25 | $2.50 | $2.80 |
Ключевые отличия
- AEC-Q100 qualified for automotive use (против DRV8801)
- Wide supply voltage range of 5.5 V to 36 V (против DRV8801)
- Lower on-resistance of 0.5 ohm (против A4950)
Заметки по проектированию
The PowerSO-20 package has a thermal resistance of 35 °C/W. At maximum continuous current of 1.2 A per channel and a supply voltage of 12 V, power dissipation can reach 2.9 W per channel (assuming 0.5 ohm on-resistance). Ensure adequate PCB copper area and thermal vias to keep the junction temperature below 150 °C. For high ambient temperatures, consider adding a heatsink or reducing output current.
Place 100 nF ceramic capacitors close to each VS pin and a 10 µF electrolytic capacitor at the supply input to decouple high-frequency noise and handle current transients. Use wide traces for the motor output pins to minimize voltage drops and inductance. The exposed thermal pad should be soldered to a large copper pour for effective heat dissipation.
Do not exceed the absolute maximum supply voltage of 40 V. Ensure the logic inputs are not left floating; use pull-up or pull-down resistors as needed. The diagnostic pins are open-drain and require external pull-up resistors. When driving inductive loads, place freewheeling diodes across the motor terminals to prevent voltage spikes that could damage the device.
Информация о соответствии
RoHS compliant and AEC-Q100 qualified per STMicroelectronics product page. REACH compliance is assumed based on ST's general compliance, but not explicitly stated in the provided data.