LPC2102FBD48 - 70MHz ARM7 Microcontroller 16KB Flash | NXP
Артикул: LPC2102FBD48 ✓ АктивенLPC2102FBD48 Обзор
An ARM7TDMI-S microcontroller is a 32-bit RISC processor core commonly used in embedded control systems. The LPC2100 series combines that core with fast GPIO ports, embedded flash, serial interfaces, analog conversion, and real-time emulation. In the hierarchy of electronic components, this device belongs to the microcontroller family, within embedded processors and semiconductor ICs. Its 128-bit memory interface and accelerator architecture support efficient 32-bit instruction execution at the maximum clock rate.
Key features include 70 MHz CPU operation, 16 KB of on-chip flash, a 10-bit ADC, in-system programming, in-application programming, and real-time emulation support. The 48-LQFP package provides a conventional leaded footprint that is practical for prototype boards, industrial controllers, and legacy equipment. The operating supply information identifies the device as supporting 1.8 V and 3.3 V operation.
The LPC2102 position within the LPC2101, LPC2102, and LPC2103 family is defined by its embedded flash capacity. The family shares the ARM7TDMI-S core and real-time emulation architecture while offering 8 KB, 16 KB, or 32 KB flash configurations. The LPC2103 member also benefits from the 128-bit memory interface and accelerator architecture described for the family, which are valuable for interrupt service routines and DSP-oriented code.
Typical applications include industrial control modules, data acquisition equipment, building controls, embedded instrumentation, communications interfaces, and legacy peripheral controllers. The 10-bit ADC supports analog monitoring functions, while the fast GPIO ports suit high-speed digital control and interface tasks. ISP and IAP support also make the device useful where field updates or configuration storage are required.
When designing a board around the LPC2102FBD48, follow the manufacturer pin-description table for signal assignment and verify the external crystal, reset, and decoupling requirements. Use the NXP datasheet as the authority for peripheral multiplexing, electrical limits, and programming procedures. Confirm legacy software support before committing the MCU to a new production design, because ARM7TDMI-S tools and libraries differ from modern Cortex-M ecosystems.
Аналоги без доработки для LPC2102FBD48 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LPC2102FBD48 (тот же форм-фактор и посадочное место) — отличается по Product Type, ADC Resolution, Embedded Flash Memory, Flash Organization, Package.
LPC2103FBD48EL
✅ Прямая заменаУточнить цену
Открыть даташит →LPC2102FBD48 Максимальные параметры и электрические характеристики
| Product Type | 16-bit/32-bit ARM7TDMI-S microcontroller |
| CPU Architecture | ARM7TDMI-S 32-bit RISC core |
| Maximum CPU Frequency | 70 MHz |
| Embedded Flash Memory | 16 KB |
| Flash Organization | 16K x 8 |
| Рабочее напряжение питания | 1.8 V and 3.3 V |
| ADC Resolution | 10-bit |
| Programming | In-system programming and in-application programming |
| Emulation Support | Real-time emulation |
| Memory Interface | 128-bit wide memory interface |
| Architecture Feature | Accelerator architecture |
| Package Type | 48-LQFP |
| Package Dimensions | 7 mm x 7 mm |
| Тип монтажа | Surface Mount |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Руководство по цоколевке LPC2102FBD48 в корпусе 7 mm x 7 mm
Цоколевка для LPC2102FBD48 (корпус 7 mm x 7 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для LPC2102FBD48.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LPC2102FBD48 подходит для 6 применениеs: Industrial Sensor and Control Module, Data Acquisition Front End, Building Automation Controller, Legacy Communication Equipment, Embedded Instrument Control, Educational ARM Controller Platform.
Industrial Sensor and Control Module
The LPC2102FBD48 is suited to compact industrial control modules because its 70 MHz ARM7TDMI-S core can service fast GPIO logic while the 10-bit ADC handles analog sensor inputs. Use the fast ports for limit switches, alarm lines, and actuator control, and reserve the ADC channels for temperature, pressure, or level monitoring. The 16 KB of embedded flash is sufficient for compact control firmware, and ISP supports production programming. For industrial deployment, verify the operating-temperature limit, isolation strategy, protected input topology, and EMC requirements before the design is released for production.
Рекомендуется
Data Acquisition Front End
The LPC2102FBD48 can serve as a data-acquisition front end for instrumentation that converts analog inputs into digital measurements and then transmits processed results over a serial interface. Its 10-bit ADC supports basic process monitoring, while the 70 MHz CPU provides headroom for filtering, calibration, and communication formatting. The 48-LQFP footprint also exposes numerous fast ports for status indicators and front-panel controls. Design the analog path around the datasheet input range, add appropriate conditioning, and confirm the ADC acquisition timing in firmware.
Рекомендуется
Building Automation Controller
The LPC2102FBD48 fits building automation controllers that combine digital I/O, analog monitoring, and serial connectivity in a small embedded platform. Fast GPIO handling supports relay-status inputs, push-button controls, and alarm outputs, while the ADC can supervise analog sensors or battery-related measurements. The LPC2100 family supports ISP and IAP, which assists production programming and controlled firmware maintenance in installed equipment. Use isolated drivers for relays, protected communication interfaces, and a watch strategy appropriate to the enclosure temperature profile.
Рекомендуется
Legacy Communication Equipment
The LPC2102FBD48 is applicable to legacy communications and protocol-conversion equipment that depends on an established ARM7TDMI-S software base. Its 70 MHz execution rate supports protocol handling, buffering, and supervisory tasks, while the fast ports accommodate serial links and status signaling. ISP and IAP capabilities allow firmware loading and field maintenance where the board exposes the necessary programming interface. When integrating into an existing product, preserve the original clock, reset, and debug arrangement and verify the new board against the original schematic.
Рекомендуется
Embedded Instrument Control
The LPC2102FBD48 works well as the control processor for embedded instruments that combine a numeric display, keypad input, measurement channels, and a communications port. The ARM7TDMI-S core handles display updates, key scanning, and measurement sequencing, and the 10-bit ADC supports basic analog channels. Its 16 KB of flash keeps the firmware footprint small for focused embedded tasks. Keep display and communication interfaces electrically separated from analog inputs, and use the manufacturer pin-muxing tables to avoid peripheral conflicts.
Рекомендуется
Educational ARM Controller Platform
The LPC2102FBD48 is suitable for educational embedded-controller platforms because it combines a familiar ARM7TDMI-S architecture, real-time emulation, and a conventional 48-LQFP footprint with accessible flash programming. Students can exercise GPIO control, timer-based routines, serial communication, and basic 10-bit ADC acquisition on one microcontroller. The ISP and IAP features support laboratory programming and firmware updates without removing the device. Before expanding a teaching board, confirm that the chosen ARM7 debugger and software environment support ARM7TDMI-S targets and real-time emulation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LPC2102FBD48 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LPC2103FBD48 |
|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | NXP Semiconductors | NXP Semiconductors |
| CPU Core | ARM7TDMI-S | ARM7TDMI-S |
| Maximum CPU Frequency | 70 MHz | 70 MHz |
| Embedded Flash Memory | 16 KB | 32 KB |
| Programming Support | ISP and IAP | ISP and IAP |
| Emulation Support | Real-time emulation | Real-time emulation |
| Mounting Type | Surface Mount | Surface Mount |
Ключевые отличия
- Balanced embedded flash capacity for compact ARM7 control designs (против LPC2103FBD48)
- Documented 70 MHz ARM7TDMI-S processing core (против LPC2103FBD48)
- Integrated 10-bit ADC for embedded analog measurement (против LPC2103FBD48)
Заметки по проектированию
Route the MCU power, ground, reset, clock, and programming signals according to the NXP layout guidance. Place the required decoupling capacitors adjacent to their supply pins and keep analog and digital return currents separated as far as the board area allows. Because LPC2100 peripherals are multiplexed, assign every pin from the manufacturer pin-description table before routing the PCB rather than inferring functions from package position alone.
Check the configured peripheral clock against the device timing requirements before enabling high-speed serial functions or triggering ADC conversions. Route oscillator and sensitive analog nets away from switching nodes and keep the ground reference for analog conversion continuous. Use series damping or filtering where an external connector can introduce transients, and confirm the maximum input levels against the operating voltage of the selected 1.8 V or 3.3 V configuration.
The most common migration mistake is assuming that any MCU in the same package is automatically interchangeable. The LPC2103FBD48 shares the LPC2100 core and 48-LQFP format but has twice the embedded flash, so review peripheral multiplexing, startup behavior, and board-level connections before substituting it. Also confirm that the selected ARM7TDMI-S development tools, linker configuration, and application code match the exact NXP device.
Информация о соответствии
The manufacturer product and distributor information identify the LPC2100 family and its package, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statements were captured for this record. AEC-Q100 status is treated as not applicable because no automotive qualification statement is documented for this part.