LPC4315JET100551 - 204MHz Dual-Core MCU | NXP Semiconductors
Артикул: LPC4315JET100551 ✓ АктивенLPC4315JET100551 Обзор
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, and digital I/O into one device. The LPC4315 belongs to the LPC43xx family, which combines a high-performance Cortex-M4 core with a Cortex-M0 coprocessor. This architecture belongs to the embedded microcontroller hierarchy and is intended to execute control logic, manage communications, and supervise peripheral functions within a compact embedded system.
Key device features include dual-core operation, 768 KB of flash, up to 136 kB of on-chip SRAM for the broader LPC43xx family, 16 kB of EEPROM, and a quad SPI Flash Interface. Advanced peripherals include the State Configurable Timer, Serial General Purpose I/O interface, Ethernet, USB, and high-speed serial interfaces. The 10-bit ADC and operating range of 2.2 V to 3.6 V make the device suitable for mixed-signal industrial control, networking, and embedded communication systems.
The Cortex-M4 core handles application code and demanding control tasks, while the Cortex-M0 core can offload lower-level or communication-related work. The 204 MHz maximum clock speed provides useful processing headroom for protocol handling, state machines, data acquisition, and supervisory control. Peripheral integration reduces the number of discrete devices required when a design needs multiple serial interfaces, event counting, GPIO expansion, or external flash connectivity.
Typical uses include industrial monitoring, building and factory automation, network-connected embedded controllers, sensor acquisition systems, and communications equipment. In these applications, the microcontroller can combine real-time control with Ethernet or USB connectivity while using its ADC and configurable peripherals to interface with sensors, relays, actuators, and human-interface electronics. The 100-TFBGA package also supports compact boards where a large number of signal connections and fine routing are required.
PCB implementation requires careful BGA-layout discipline because the 100-ball package provides limited pitch and exposes many signals in a small 9 mm by 9 mm footprint. Follow the NXP land pattern, route high-speed differential signals as a controlled-length group, and provide continuous supply planes with local high-frequency decoupling. Confirm the exact pin assignments, exposed connections, and board requirements against the manufacturer documentation before release.
This product record combines the exact LPC4315JET100551 ordering designation with package, processor, memory, voltage, interface, and sourcing information. It also organizes same-package replacement options and engineering guidance so that designers can assess mechanical compatibility, firmware implications, and supply-chain alternatives before committing a high-density PCB layout.
Аналоги без доработки для LPC4315JET100551 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LPC4315JET100551 (тот же форм-фактор и посадочное место) — отличается по On-Chip SRAM, Package, Flash Memory, Product Type.
LPC4315JET100E
✅ Прямая заменаУточнить цену
Открыть даташит →LPC4315JET100E
✅ Прямая заменаУточнить цену
Открыть даташит →LPC4317JET100E
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →LPC4337JET100E
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →LPC4357JET100
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LPC4315JET100551 Максимальные параметры и электрические характеристики
| Processor Cores | Arm Cortex-M4 and Arm Cortex-M0 |
| Architecture | 32-bit ARM |
| Maximum CPU Frequency | 204 MHz |
| Flash Memory | 768 KB |
| On-Chip SRAM | Up to 136 kB in the LPC43xx family |
| EEPROM Memory | 16 kB |
| Operating Voltage Range | 2.2 V to 3.6 V |
| ADC Resolution | 10-bit |
| Корпус | 100-TFBGA (9 mm x 9 mm) |
| Тип монтажа | Surface Mount |
| External Flash Interface | Quad SPI Flash Interface (SPIFI) |
| Timer Peripheral | State Configurable Timer (SCT) |
| GPIO Peripheral | Serial General Purpose I/O (SGPIO) |
| Ethernet Support | Yes |
| USB Support | Yes |
| Статус RoHS | Compliant |
| GPIO Count | 49 |
Руководство по цоколевке LPC4315JET100551 в корпусе 100-tfbga (9 mm x 9 mm)
Цоколевка для LPC4315JET100551 (корпус 100-tfbga (9 mm x 9 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для LPC4315JET100551.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LPC4315JET100551 подходит для 6 применениеs: Industrial Automation Controller, Ethernet-Connected Sensor Hub, Building Automation Equipment, USB Data Acquisition System, Motor and Power Control System, Communications Equipment.
Industrial Automation Controller
LPC4315JET100551 fits an industrial automation controller that combines real-time control with Ethernet communications. Its Cortex-M4 core can execute control logic at up to 204 MHz, while the Cortex-M0 coprocessor handles a separate supervisory or communication workload. The 49 GPIO, 10-bit ADC, SCT timer, and configurable SGPIO interface support sensing, actuator control, and event handling. A 2.2 V to 3.6 V supply range fits conventional embedded rails, although the final design must verify temperature grade, isolation, EMC, and functional-safety requirements.
Рекомендуется
Ethernet-Connected Sensor Hub
LPC4315JET100551 can serve as the processing center of an Ethernet-connected sensor hub. The 204 MHz Cortex-M4 core supports protocol processing and local filtering, while the Cortex-M0 core can service time-critical communication or I/O tasks. The 10-bit ADC supports analog sensor channels, and SGPIO can expand or reorganize digital interfaces. With 768 KB of flash and 16 kB of EEPROM, the device accommodates firmware, configuration data, and nonvolatile parameters while reducing the need for external nonvolatile memory.
Рекомендуется
Building Automation Equipment
LPC4315JET100551 is appropriate for building automation equipment that must monitor environmental inputs and coordinate multiple digital loads. Its 49 GPIO support sensing and switching, the SCT provides event counting and timing functions, and the 10-bit ADC can interface with suitable analog condition-detection circuits. The dual-core architecture allows the main core to manage application logic while the coprocessor handles a background task. For deployment in heating, ventilation, access, or occupancy equipment, confirm the required temperature range and environmental qualification for the exact ordering suffix.
Рекомендуется
USB Data Acquisition System
LPC4315JET100551 can act as the control and communication processor in a USB data-acquisition system. Its 204 MHz Cortex-M4 core can collect samples, execute control algorithms, and prepare data for transmission, while the Cortex-M0 coprocessor can manage USB traffic or a separate service routine. The device offers 768 KB of flash, 16 kB of EEPROM, a 10-bit ADC, and 49 GPIO in one 100-TFBGA device. The design must budget USB signal routing, analog front-end isolation, reference accuracy, decoupling, and firmware timing for the selected peripheral configuration.
Рекомендуется
Motor and Power Control System
LPC4315JET100551 can supervise motors, relays, and other power-control stages in a compact embedded controller. Its high-speed Cortex-M4 core supports current-loop and sequencing logic, while the SCT and multiple GPIO channels assist with timing, pulse detection, and actuator command generation. The 2.2 V to 3.6 V operating range suits low-voltage digital control, with power stages handled separately. Designers must add appropriate gate drivers, protection, current sensing, and thermal management rather than driving power devices directly from MCU pins.
Рекомендуется
Communications Equipment
LPC4315JET100551 is suited to communications equipment that needs flexible real-time processing and multiple peripheral functions. The Cortex-M4/M0 combination can separate protocol processing from lower-latency service tasks, while Ethernet, USB, SPIFI, and configurable serial resources support external connectivity. At 204 MHz with 768 KB of flash, the microcontroller can manage framing, routing, status monitoring, and configuration storage. Production designs should validate clock-tree configuration, PHY interface requirements, signal integrity, firmware timing, and the exact device temperature and qualification grades.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LPC4315JET100551 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LPC4315JET100 | LPC4315JET100E | LPC4317JET100 | LPC4337JET100 | LPC4357JET100 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) | 100-TFBGA (9x9) |
| Processor Core | Arm Cortex-M4 plus Arm Cortex-M0 | Arm Cortex-M4 plus Arm Cortex-M0 | Arm Cortex-M4 plus Arm Cortex-M0 | Arm Cortex-M4 plus Arm Cortex-M0 | Arm Cortex-M4 plus Arm Cortex-M0 | Arm Cortex-M4 plus Arm Cortex-M0 |
| Maximum CPU Frequency | 204 MHz | 204 MHz | 204 MHz | 204 MHz | 204 MHz | 204 MHz |
Ключевые отличия
- Integrated dual-core architecture (против LPC4357JET100)
- 768 KB of integrated flash (против LPC4315JET100E)
- Преимущество (против LPC4315JET100)
Заметки по проектированию
Use the exact NXP 100-TFBGA land pattern rather than a generic BGA footprint. Assign all 100 balls from the manufacturer pin table, preserve the exposed thermal and electrical connections shown in the package drawing, and verify pad, solder-mask, paste, and via dimensions against the assembly process. Because the body is only 9 mm by 9 mm, even a small routing error can affect assembly yield or connect the wrong power and ground balls.
Plan the 2.2 V to 3.6 V supply path around the worst-case clock, Ethernet, USB, analog, and GPIO workload rather than a nominal operating point. Place required bypass capacitors close to the associated supply balls, provide a continuous low-impedance ground reference, and keep switching regulators and inductors away from sensitive analog inputs. Confirm regulator startup behavior against the LPC43xx power-sequencing requirements before enabling external subsystems.
Route Ethernet and USB interfaces as controlled high-speed signal groups, following the NXP reference design and layout guidance. Maintain the intended impedance, avoid stubs and unnecessary test pads, provide suitable return paths, and observe differential-pair spacing rules. A 100-TFBGA escape strategy should be planned before placement so that fine-pitch balls can reach connector or PHY components without long, tightly coupled segments.
Do not treat LPC4315JET100 and LPC4315JET100551 as interchangeable without checking the complete ordering suffix, temperature grade, qualification, and pin documentation. Similarly, memory capacity differences among LPC43xx family members can change linker placement, boot configuration, firmware size, and peripheral availability. Validate the startup code, bootloader, Ethernet and USB stacks, pin multiplexing, and production test program whenever the exact device revision changes.
Информация о соответствии
RoHS status is stated in the JLCPCB product listing. No manufacturer statements supporting REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status were present, so those fields remain unknown.