LT1787IS8 - Precision High-Side Current Sense Amplifier | ADI
Артикул: LT1787IS8 ✓ АктивенLT1787IS8 Обзор
A high-side current-sense amplifier is an analog signal-conditioning IC placed in series with a power path. It converts the small differential voltage produced by a sense resistor into a larger, easier-to-measure voltage. This current-sense amplifier belongs to the amplifier IC hierarchy and supports power monitoring, current feedback, and protection systems without interrupting the load path.
The LT1787IS8 offers an ultralow input offset voltage of 40 µV, improving measurement accuracy when the shunt voltage is small. Its bidirectional sensing capability allows the output to indicate both forward and reverse current. A 60 µA operating current supports low-power instrumentation, while the 2.5 V to 36 V supply range covers a broad range of industrial and automotive-style power rails.
The device monitors current through an external sense resistor and amplifies the differential voltage appearing across that resistor. An output filter capacitor can be used to control bandwidth and noise when the application does not require the full response speed. The greater-than-12-bit dynamic range supports precision measurements where a conventional 250 mV full-scale input would consume excessive signal range.
Typical uses include battery-management monitoring, motor-control feedback, power-supply telemetry, industrial test equipment, and load-current detection. The SO-8 package supports compact surface-mount layouts, while the low operating current makes the amplifier suitable for portable and always-on measurement systems.
When designing the circuit, select the sense resistor to keep its voltage drop within the amplifier's input range and to limit power dissipation. Connect the sense inputs close to the resistor to minimize pickup of high-current switching noise, and use a ground plane that does not carry load current through the analog return path.
This product page combines the manufacturer's operating information with package details, application guidance, verified alternatives, and practical PCB recommendations to help engineers evaluate the LT1787IS8 before integrating a precision current-measurement channel.
Аналоги без доработки для LT1787IS8 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
LT1787CS8
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LT1787MS8
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LT1787CMS8
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LT1787IS8#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LT1787IS8 Максимальные параметры и электрические характеристики
| Product Type | Precision high-side current-sense amplifier |
| Supply Voltage Range | 2.5 V to 36 V |
| Operating Current | 60 µA |
| Input Offset Voltage | 40 µV typical |
| Maximum Input Offset Voltage | 75 µV |
| Dynamic Range | Greater than 12 bits |
| Current Sensing Direction | Bidirectional |
| Sense Resistor | User-selectable external sense resistor |
| Тип выхода | Amplified current or voltage indication |
| Supply Operation, LT1787HV Version | 60 V |
| Диапазон рабочих температур | -40 °C to +85 °C |
| Корпус | 8-pin SOIC, PDSO-8 |
| Число выводов | 8 pins |
| Тип монтажа | Surface mount |
| Terminal Finish | Matte tin |
| Lead Geometry | Gull wing |
| Power Category | Micropower current-sense amplifier |
| Статус RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Руководство по цоколевке LT1787IS8 в корпусе 8-pin soic, pdso-8
Цоколевка для LT1787IS8 (корпус 8-pin soic, pdso-8). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для LT1787IS8.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LT1787IS8 подходит для 6 применениеs: Battery Charge and Discharge Monitoring, Motor Drive Current Feedback, Industrial Power-Supply Telemetry, Precision Load-Current Detection, Portable Instrument Current Monitoring, Test and Measurement Instrumentation.
Battery Charge and Discharge Monitoring
The LT1787IS8 fits high-side battery-current measurement because its 2.5 V to 36 V supply range and 60 µA operating current limit the burden on portable power systems. Place it across an external sense resistor and use the amplified output to determine charge or discharge current from signal polarity. The 40 µV typical offset helps preserve accuracy when the shunt voltage is small, although resistor tolerance, gain error, and input filtering remain part of the total measurement uncertainty.
Motor Drive Current Feedback
The LT1787IS8 can provide current feedback in an industrial or low-voltage motor controller because it detects bidirectional current and supplies an amplified measurement to a control loop. Its greater-than-12-bit dynamic range allows a modest shunt voltage to represent current with useful resolution. Place the amplifier close to the shunt and control high-current return paths, since PWM switching edges can couple into the differential input and distort the measured current.
Industrial Power-Supply Telemetry
The LT1787IS8 is useful for reporting load current in a 24 V industrial power rail because it accepts supplies through 36 V and draws only 60 µA. The external sense resistor establishes the measurement range, while the amplifier converts the shunt voltage into a signal suitable for monitoring. Choose the resistor carefully under worst-case continuous and transient load, and provide filtering only after checking whether its bandwidth delay is acceptable for the power system.
Precision Load-Current Detection
The LT1787IS8 supports precision load-current detection where a conventional 250 mV full-scale range would waste much of the available signal span. Its 40 µV typical offset reduces the error contribution when the measured current produces only a small shunt voltage. Bidirectional sensing also supports systems that must distinguish charging from discharging or forward from reverse current, subject to calibration of the output around zero.
Portable Instrument Current Monitoring
The micropower LT1787IS8 is suitable for portable instruments that continuously monitor supply current because its specified operating current is only 60 µA. The 8-pin SOIC package provides a compact surface-mount implementation, and the low offset voltage supports measurements with small shunt drops. For battery-operated equipment, verify the amplifier's behavior at the minimum system supply and account for the sense resistor's continuous power dissipation.
Test and Measurement Instrumentation
The LT1787IS8 can serve as the front end of precision test and measurement equipment that reports current through a DUT or external load. Its greater-than-12-bit dynamic range and 40 µV typical offset support shunt-based measurement with useful sensitivity, while the 60 µA supply current is advantageous in multi-channel instruments. Layout should keep sense traces away from switching nodes and prevent high-current ground returns from sharing the sensitive analog ground path.
Справочные инженерные данные для LT1787IS8 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LT1787CS8 | LT1787MS8 | LT1787CMS8 | LT1787IS8#PBF |
|---|---|---|---|---|---|
| Package | SO-8 (PDSO-8) | SO-8 (PDSO-8) | SO-8 (PDSO-8) | SO-8 (PDSO-8) | SO-8 (PDSO-8) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Precision high-side current-sense amplifier | Precision high-side current-sense amplifier | Precision high-side current-sense amplifier | Precision high-side current-sense amplifier | Precision high-side current-sense amplifier |
| Supply Voltage Range | 2.5 V to 36 V | 2.5 V to 36 V | 2.5 V to 36 V | 2.5 V to 36 V | 2.5 V to 36 V |
| Operating Current | 60 µA | 60 µA | 60 µA | 60 µA | 60 µA |
| Input Offset Voltage | 40 µV typical; 75 µV maximum | 40 µV typical; 75 µV maximum | 40 µV typical; 75 µV maximum | 40 µV typical; 75 µV maximum | 40 µV typical; 75 µV maximum |
| Dynamic Range | Greater than 12 bits | Greater than 12 bits | Greater than 12 bits | Greater than 12 bits | Greater than 12 bits |
| Current Sensing Direction | Bidirectional | Bidirectional | Bidirectional | Bidirectional | Bidirectional |
| Sense Resistor | User-selectable external sense resistor | User-selectable external sense resistor | User-selectable external sense resistor | User-selectable external sense resistor | User-selectable external sense resistor |
Ключевые отличия
- Very low offset voltage preserves small-signal accuracy (против LT1787CS8)
- Greater dynamic range than a conventional full-scale sense input (против LT1787MS8)
- Pin-compatible family alternatives preserve PCB layout (против LT1787CMS8)
Заметки по проектированию
Route the two sense traces as a compact differential pair directly from the sense-resistor terminals to the amplifier inputs. Keep the loop area small and avoid routing beneath switching nodes, inductors, or high-current return paths. Place the amplifier ground connection at a quiet analog-ground point so that shunt current does not create a measurable voltage in the measurement ground path.
Select the external sense resistor from the maximum current and power requirement rather than resistance alone. Estimated: for a 10 A continuous current and a 10 mΩ resistor, shunt dissipation is P = I²R = 1.0 W and the shunt voltage is 100 mV. Use a resistor with an appropriate pulse rating and thermal allowance, and verify that the resulting voltage remains within the amplifier's operating input range.
If additional filtering is required, add the filter capacitor at the appropriate amplifier input or output node in accordance with the manufacturer application guidance. Filtering reduces high-frequency noise but can introduce phase delay or reduce measurement bandwidth. Verify the required response time before adding capacitance and confirm that the resulting settling behavior is acceptable for the control or protection loop.
Do not treat the 60 V rating of the related LT1787HV as interchangeable with the LT1787IS8's 36 V maximum supply. That is a 24 V or 66.7% increase and also requires confirmation of every related electrical characteristic. Likewise, verify the exact pin functions, temperature grade, and ordering suffix before treating a family member as a drop-in substitution.
Информация о соответствии
The LT1787IS8#PBF ordering code denotes a lead-free finish. No explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification statement is included in the available product information.