LT3669EUFD#PBF - IO-Link Transceiver with Buck/LDO | Analog Devices
Артикул: LT3669EUFD#PBF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.2 | $9,20 |
| 10 | $9.2 | $92,00 |
| 100 | $9.2 | $920,00 |
| 500 | $9.2 | $4.600,00 |
| 1.000 | $9.2 | $9.200,00 |
LT3669EUFD#PBF Обзор
An IO-Link transceiver is a specialized interface IC that connects sensors, actuators, and industrial equipment using power and communication lines. The LT3669 integrates that interface function with local power conversion, allowing a system designer to provide both the IO-Link communication path and regulated auxiliary power from one device. Its architecture belongs to the transceiver, interface IC, power-management IC, and embedded industrial-control hierarchy.
The principal verified features include a 28-pin QFN surface-mount package, integrated step-down regulator and LDO, wake-up detect, programmable power-on reset timing, and adjustable transmitter current limit and slew rate. The manufacturer describes the LT3669 family as recommended for new designs. These features make it useful in industrial IO-Link master or sensor interfaces where space, local power, fault handling, and deterministic startup behavior matter.
The device can be used in industrial automation equipment, factory sensor nodes, actuator interfaces, process-control systems, and IO-Link-compatible sensor modules. The integrated power regulators reduce the number of separate support components, while wake-up detection can help a connected system recognize a remote device state. The programmable power-on reset timer provides additional control during system startup and recovery.
When designing around the LT3669EUFD#PBF, engineers should verify the exact electrical limits, pin functions, regulator settings, and external component values against the official LT3669/LT3669-2 datasheet. The QFN package also requires careful PCB layout and thermal management. The integrated switching regulator can introduce layout-dependent EMI and high-current paths, so input decoupling, switching-loop minimization, and exposed-pad thermal design should be reviewed before production.
This product page combines the verified Analog Devices product information, distributor listings, and practical engineering guidance. It is intended to help engineers identify the correct IO-Link transceiver, compare package and lifecycle information, locate the datasheet, and plan a robust industrial interface implementation. The target MPN includes the E suffix and PBF lead-free ordering designation; variant and package details should be confirmed against the manufacturer documentation before substituting or upgrading.
LT3669EUFD#PBF is best suited to compact industrial IO-Link systems where communication, auxiliary power, wake-up detection, and programmable startup behavior are integrated in a single 28-QFN device. Use the manufacturer datasheet as the authority for final electrical, thermal, timing, and application values.
Аналоги без доработки для LT3669EUFD#PBF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LT3669EUFD#PBF (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature Range, Wake-Up Detect, Integrated Power Functions, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
LT3669EUFD-2#PBF
✅ Прямая замена✓ В наличии
$5.38 / шт.
Открыть даташит →LT3669HUFD#PBF
✅ Прямая замена✓ В наличии
$3.8294 / шт.
Открыть даташит →LT3669IUFD#PBF
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →LT3669EUFD-PBF
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LT3669EUFD#PBF
✅ Прямая замена✓ В наличии
$9.2 / шт.
Открыть даташит →LT3669EUFD#PBF Характеристики
| Product Type | IO-Link transceiver with integrated step-down regulator and LDO |
| Transmitter/Receiver Configuration | Single transmitter/receiver |
| Supply Voltage Range | 7.5 V to 40 V |
| Диапазон рабочих температур | -40 C to +125 C |
| Корпус | 28-QFN (4 mm x 5 mm) |
| Тип монтажа | Surface mount |
| Integrated Power Conversion | Step-down switching regulator and low-dropout linear regulator |
| Wake-Up Detect | Included |
| Power-On Reset | Programmable timer |
| Transmitter Current Limit | Externally adjustable |
| Transmitter Slew Rate | Externally adjustable |
| Interface Category | Industrial IO-Link transceiver |
| Статус RoHS | Details available through manufacturer product data |
| Lead-Free Designation | PBF |
| Package Pin Count | 28 pins |
| Exposed Thermal Pad | QFN package detail |
| Manufacturer | Analog Devices |
Руководство по цоколевке LT3669EUFD#PBF в корпусе 28 pins
Цоколевка для LT3669EUFD#PBF (корпус 28 pins). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для LT3669EUFD#PBF.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LT3669EUFD#PBF подходит для 6 применениеs: Industrial IO-Link Sensor Interface, Factory Automation Actuator Node, Process-Control Sensor Module, Industrial Sensor-to-PLC Gateway, Compact Industrial Power-and-Communication Module, Industrial Detection and Wake-Up Control.
Industrial IO-Link Sensor Interface
The LT3669EUFD#PBF fits an industrial IO-Link sensor interface because it combines a single IO-Link transceiver with an integrated step-down regulator and LDO. The verified 7.5 V to 40 V supply range accommodates industrial bus environments, while wake-up detect supports device-state or connection-related handling. Place the transceiver near the connector and route the IO-Link lines away from the switching-regulator power path. The integrated power conversion can reduce board area, but the exact output settings, capacitor values, protection requirements, and timing must follow the manufacturer datasheet.
Рекомендуется
Factory Automation Actuator Node
For factory automation actuator nodes, the LT3669EUFD#PBF provides an IO-Link communication interface together with local regulated power support. Its integrated step-down regulator and LDO can simplify a compact actuator module that must interface with a PLC or industrial master. The 28-QFN package supports dense layouts, although exposed-pad thermal management and careful switching-node layout are essential. Verify current capability, fault behavior, and regulator configuration in the datasheet before selecting the device for a particular actuator load.
Рекомендуется
Process-Control Sensor Module
The LT3669EUFD#PBF can be used in a process-control sensor module that needs IO-Link communication and regulated auxiliary power in a limited footprint. The integrated power stages make the device relevant to compact field-mounted electronics, while the -40 C to +125 C specified operating range supports demanding industrial environments. Designers should place input and output decoupling close to the device, isolate communication traces from high-current switching paths, and validate EMC, protection, and sensor accuracy at the system level.
Рекомендуется
Industrial Sensor-to-PLC Gateway
The LT3669EUFD#PBF is suitable for a sensor-to-PLC gateway that terminates an IO-Link connection and supplies local power to a sensor or actuator. Its single transmitter/receiver configuration and integrated regulators help reduce component count in distributed industrial control systems. The programmable power-on reset timer can make startup sequencing more deterministic, while wake-up detect can assist with connection-state management. Validate the exact IO-Link electrical levels, timing, and protection network against the target PLC interface.
Рекомендуется
Compact Industrial Power-and-Communication Module
The LT3669EUFD#PBF is useful when an industrial module needs both communication and auxiliary power from a single device. Combining an IO-Link transceiver, step-down converter, and LDO can simplify power partitioning around sensors, actuators, and local logic. The 28-QFN package allows a compact implementation, but the regulator must be laid out with short switching loops and adequate thermal copper. Confirm output-current ratings, efficiency, stability, and startup behavior in the official datasheet before release.
Рекомендуется
Industrial Detection and Wake-Up Control
The LT3669EUFD#PBF can support detection and control functions where wake-up behavior and programmable startup timing are important. Analog Devices specifically identifies wake-up detect and a programmable power-on reset timer as features of the LT3669 family. These functions can simplify behavior around remote sensors, actuator wake-up, and controlled power sequencing. The implementation must account for connector noise, threshold selection, timing margins, and the distinction between device wake-up and normal IO-Link communication.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LT3669EUFD#PBF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LT3669EUFD-2#PBF | LT3669HUFD#PBF | LT3669IUFD#PBF | LT3669EUFD-PBF | LT3669EUFD#PBF |
|---|---|---|---|---|---|---|
| Package | 28-QFN (4 mm x 5 mm) | 28-QFN (4 mm x 5 mm) | QFN-28 | QFN-28 | QFN-28 | 28-QFN (4 mm x 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Category | IO-Link transceiver | IO-Link transceiver | IO-Link transceiver | Transceiver | IO-Link transceiver | IO-Link transceiver |
Ключевые отличия
- Integration of IO-Link communication and local power conversion (против LT3669EUFD-2#PBF)
- Industrial supply and temperature range (против LT3669EUFD-2#PBF)
- Startup and connection-management features (против LT3669HUFD#PBF)
- Single IC integration for compact sensor nodes (против LT3669IUFD#PBF)
Заметки по проектированию
Treat the LT3669EUFD#PBF as a mixed-signal and power-layout device. Place the required input and output capacitors close to their associated pins, keep the step-down switching loop compact, and route high-current paths away from the IO-Link signal traces. Confirm the exact capacitor values, exposed-pad connection, and land pattern in the official datasheet before fabrication.
The 28-QFN package provides limited board area for heat removal, so thermal performance depends on the PCB copper and exposed-pad implementation. Use the datasheet thermal information to determine whether additional copper, cooling, or airflow is required for the calculated regulator dissipation. Do not infer thermal performance from package size alone, and measure junction temperature in the final assembly when necessary.
Do not substitute LT3669EUFD-2#PBF, LT3669HUFD#PBF, or LT3669IUFD#PBF solely because the parts appear in the same family or package search results. Confirm ordering-code meaning, pin functions, electrical limits, timing, and regulator settings against the datasheet. In particular, verify the exposed-pad connection and any suffix-dependent configuration before calling a candidate a drop-in replacement.
Информация о соответствии
The PBF suffix indicates lead-free ordering, but the supplied web results do not provide complete RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 certification data.
