M2GL090-FG676I - 86K LEs, 425 I/O IGLOO2 FPGA | Microchip
Артикул: M2GL090-FG676I ✓ АктивенM2GL090-FG676I Обзор
An FPGA is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. The IGLOO2 family belongs to the broader field-programmable logic hierarchy: FPGA > programmable logic device > digital semiconductor. Unlike a fixed-function microcontroller, the M2GL090 can implement parallel control, protocol conversion, data acquisition, interface bridging, and other digital logic functions in one integrated device. Its 676-BGA package provides a high pin count for demanding external connectivity and board-level integration.
The verified distributor listings identify the M2GL090-FG676I as an 86K-logic-element IGLOO2 FPGA with 425 I/O and a 676-BGA package. The related M2GL090-1FG676I is likewise listed with 425 I/O and 86K logic elements, supporting comparison with a same-footprint speed- or ordering variant. Microchip’s M2GL090 product page describes the family as suitable for communications, industrial, and general-purpose embedded applications, including bridging functions, I/O expansion, system management, and secure connectivity.
The 676-ball BGA package is appropriate when a design requires numerous high-density board connections, but it also increases PCB layout and inspection complexity. Designers should preserve the manufacturer’s ball assignments and power, ground, configuration, and I/O guidance from the IGLOO2 packaging and pin-information document. The package is surface-mount technology and is not a through-hole package, so its land pattern and assembly process must match the selected 676-ball package variant.
Typical deployments include industrial interface bridges, communications equipment, data-conversion systems, embedded control modules, secure-connectivity infrastructure, and general-purpose I/O expansion. For these applications, the M2GL090-FG676I is selected when designers need a low-density, high-pin-count programmable logic platform rather than a fixed microcontroller. The exact timing, voltage, temperature, power, configuration, and I/O electrical limits should be confirmed in the Microchip IGLOO2 datasheet before schematic signoff or PCB release.
This page consolidates the verified Microchip and distributor information for engineering comparison, identifies same-footprint replacement candidates, and adds practical package, sourcing, and design guidance that is not found in a bare distributor listing. It is intended to support initial design decisions while preserving the manufacturer datasheet as the authoritative source for final electrical and timing requirements.
Аналоги без доработки для M2GL090-FG676I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с M2GL090-FG676I (тот же форм-фактор и посадочное место) — отличается по Configuration Memory, Device Type, Mounting Type, Package.
M2GL090-1FG676I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
M2GL090-FG676
✅ Прямая заменаУточнить цену
Открыть даташит →M2GL090-1FGG676
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
M2GL090-FGG676I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
M2GL090T-1FG676
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
M2GL090-FG676I Максимальные параметры и электрические характеристики
| Device Type | IGLOO2 field programmable gate array |
| Logic Elements | 86,000 logic elements |
| I/O Count | 425 I/O |
| Корпус | 676-ball BGA |
| Package Type | Surface-mount BGA |
| Package Pin Count | 676 balls |
| Package Shape | Square |
| Terminal Form | Ball |
| Temperature Grade | Industrial |
| Core Supply Voltage | 1.2 V |
| Programmable Logic Type | Low-density flash FPGA |
| Configuration Memory | Flash |
| Primary Application | General-purpose programmable logic |
| Supported Functions | Bridging, I/O expansion, system management, secure connectivity |
| Тип монтажа | Surface Mount |
| Статус жизненного цикла | In Production |
Руководство по цоколевке M2GL090-FG676I в корпусе square
Цоколевка для M2GL090-FG676I (корпус square). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для M2GL090-FG676I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
M2GL090-FG676I подходит для 6 применениеs: Industrial Interface Bridging, Communications Data Conversion, Secure Connectivity Infrastructure, System Management and Supervision, Data Acquisition and Signal Conditioning, Embedded Control Consolidation.
Industrial Interface Bridging
The M2GL090-FG676I fits industrial interface bridging because the verified device provides 86,000 logic elements and 425 I/O in an industrial-grade 676-BGA package. Parallel protocol converters, asynchronous serial links, legacy industrial interfaces, and monitoring signals can be implemented as programmable logic rather than distributed across several fixed-function devices. The high I/O count permits multiple buses or data directions to terminate directly at the FPGA. A practical design should assign I/O banks by voltage compatibility and follow the official IGLOO2 pin-information document. The main consideration is that every added interface requires adequate routing channels, timing constraints, and verified I/O standards rather than merely enough logical gates.
Рекомендуется
Communications Data Conversion
The M2GL090-FG676I is suitable for communications data-conversion functions where parallel data must be translated, buffered, or routed at deterministic rates. Its verified 425-I/O capacity provides substantial connectivity for wide buses and multiple channels, while the 86K logic-element device supports control state machines, clock-domain crossing, and data alignment. In router, industrial communications, or test equipment, the FPGA can consolidate otherwise separate conversion logic. Design teams must still derive each interface’s maximum frequency, voltage level, impedance, and timing from the Microchip datasheet. The BGA package also demands careful power and return-path planning to prevent simultaneous switching noise from degrading sensitive links.
Рекомендуется
Secure Connectivity Infrastructure
The M2GL090-FG676I can support secure-connectivity infrastructure by implementing protocol handling, session logic, packet filtering, and hardware-assisted security control in programmable logic. Microchip specifically identifies the M2GL090 family as suitable for secure connectivity along with bridging and system-management functions. The verified 86,000 logic elements provide capacity for parallel datapaths, while 425 I/O can connect external memory, transceivers, or status and control signals. For production use, engineers should validate cryptographic implementation assumptions, configuration security, and update procedures rather than treating generic FPGA logic as automatically secure. The component’s industrial grading supports the target environment, subject to confirmation of the exact operating-temperature limits.
Рекомендуется
System Management and Supervision
The M2GL090-FG676I is well suited to centralized system-management tasks because programmable logic can monitor many discrete signals, implement fault sequencing, and coordinate resets without relying on a single hardwired controller. The verified 425-I/O count supports wide supervisory buses and multiple alarm inputs, while the 86K logic elements accommodate state machines and diagnostic logic. A system-management design may combine health monitoring, power-sequence control, watchdog logic, and communication formatting in the same FPGA. Because the package uses 676 balls, engineers must follow the exact bank and ball assignments and maintain uninterrupted ground connectivity beneath the device. Configuration retention and startup behavior should also be reviewed before using the FPGA as a safety-critical supervisor.
Рекомендуется
Data Acquisition and Signal Conditioning
The M2GL090-FG676I can implement parallel acquisition control, digital filtering, data packing, and interface conversion for industrial measurement equipment. Its 425 I/O provides ample digital connections for sensors, converters, and test fixtures, while the 86K logic-element capacity can support filtering and control pipelines. This makes the FPGA useful where deterministic parallel behavior and flexible post-processing are more important than a simple fixed register map. Engineers should verify acquisition-clock tolerances, I/O drive capability, input thresholds, and supported I/O standards directly in the datasheet. Power and thermal review must include simultaneous switching across many I/O, because a large BGA footprint can concentrate return-current demand even when average logic utilization is modest.
Рекомендуется
Embedded Control Consolidation
The M2GL090-FG676I can consolidate deterministic control tasks that would otherwise occupy several microcontroller peripherals or programmable-logic devices. Its 86,000 logic elements support parallel motion-control sequencing, machine interlocks, pulse generation, and custom peripheral bridges, while 425 I/O allow direct connection to sensors and actuators. For industrial machinery, the FPGA provides a flexible implementation layer for timing-critical control alongside a higher-level processor. Design partitioning is important: the official datasheet and device documentation should govern clock, I/O, and configuration limits, while safety requirements should remain outside general-purpose programmable logic unless formally assessed. The 676-BGA assembly also requires board-level thermal, solder, and inspection planning.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для M2GL090-FG676I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | M2GL090-1FG676I | M2GL090-FG676 | M2GL090-1FGG676 | M2GL090-FGG676I | M2GL090T-1FG676 |
|---|---|---|---|---|---|---|
| Package | 676-BGA | 676-BGA - same | 676-BGA - same | 676-BGA - same | 676-BGA - same | 676-BGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Family | IGLOO2 FPGA | IGLOO2 FPGA | M2GL090 FPGA | M2GL090 FPGA | M2GL090 FPGA | M2GL090 FPGA |
| Programming Technology | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA | Flash FPGA |
Ключевые отличия
- Exact verified industrial-grade ordering option (против M2GL090-FG676)
- Verified 425-I/O connectivity in the 676-BGA footprint (против M2GL090-1FGG676)
- Directly documented same-family footprint match (против M2GL090-1FG676I)
Заметки по проектированию
Use the official IGLOO2 Packaging and Pin Descriptions User Guide to create the 676-ball land pattern and assign every power, ground, configuration, clock, and user I/O ball. Do not infer BGA connectivity from the distributor summary. Check ball maps and I/O-bank assignments for the exact ordering suffix, and preserve the manufacturer’s recommended via, solder-mask, and thermal-via geometry before releasing the PCB.
Decouple each required supply rail at the closest available package balls and provide a low-impedance distribution network with multiple power and ground connections. The verified family data confirms a 1.2 V core supply, but allowable tolerance, sequencing, current, and auxiliary-rail requirements must come from the IGLOO2 datasheet. Avoid sharing narrow return paths between high-speed I/O and sensitive logic because simultaneous switching in the 676-BGA device can create supply noise.
The M2GL090-FG676I uses a dense 676-ball package, so thermal performance depends on the PCB stack-up, copper area, via array, airflow, and adjacent heat sources. Check the package thermal data against the device’s actual utilization and I/O switching activity rather than relying on a nominal package rating alone. Where the system enclosure limits convection, validate the assembled design with temperature measurement or thermal simulation under worst-case clock and I/O activity.
Do not treat every similarly named M2GL090 suffix as an automatic substitute. Ordering strings can encode speed grade, temperature grade, package revision, and packing, and the verified search results do not expose every difference. Compare the complete Microchip ordering table, verify the 676-BGA footprint, confirm required operating temperature, and review the bitstream/configuration compatibility before replacing the target MPN.
Информация о соответствии
The verified product and distributor results do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. No compliance status has been assumed.
