MAX1217ECQ+TD - Dual 12-Bit 125Msps ADC | Analog Devices
Артикул: MAX1217ECQ+TD ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $28.9 | $2.890,00 |
| 500 | $24.5 | $12.250,00 |
| 1.000 | $21.8 | $21.800,00 |
MAX1217ECQ+TD Обзор
An ADC (analog-to-digital converter) is a data-acquisition component that samples continuous analog voltages and produces discrete digital codes. As a pipelined converter it sits in the signal chain between an analog front end (amplifier, anti-alias filter) and a downstream DSP (digital signal processor) or FPGA. ADC hypernyms include: data converter -> analog-to-digital converter -> pipelined ADC -> broadband ADC -> 12-bit ADC -> semiconductor -> integrated circuit. The MAX1217 family occupies the broadband-joint-to-low-noise portion of this taxonomy, with 2 input channels and 2 pipelined conversion cores per package.
Key features include 12-bit resolution, 125 Msps sampling rate per channel (suitable for IF sampling in receivers), 70 dB SNR (typical) and SFDR > 80 dBc at low input frequencies, an internal buried-zener reference that eliminates an external reference IC, and CMOS-compatible digital outputs. The dual-channel architecture supports I/Q baseband sampling directly in a single chip, simplifying PCB area and BOM. The exposed-pad 100-pin TQFP enables low thermal impedance so the part sustains full-rate dual-channel sampling at industrial temperatures without derating.
Typical applications include broadband cable downstream receivers, wireless base-station IF sampling, instrumentation digitizers, medical imaging front ends, and radar signal processing. When designing with the MAX1217, place input coupling caps close to each input pin and provide an independent analog and digital ground plane joined at the exposed pad. The +TD suffix denotes tape-and-reel delivery; -40C to +85C industrial operation is supported. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical layout notes not consolidated in any single manufacturer PDF.
Аналоги без доработки для MAX1217ECQ+TD — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MAX1217ECQ+TD (тот же форм-фактор и посадочное место) — отличается по Architecture, Package, Operating Temperature Range, Input Type, Number of Channels.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MAX1218ECQ+TD
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$23.4 / шт.
Открыть даташит →MAX1216ECQ+TD
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MAX1219ECQ+TD
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$17.1 / шт.
Открыть даташит →MAX1209ETL+TG3U
✅ Прямая замена✓ В наличии
$9.95 / шт.
Открыть даташит →MAX1062BCUB+T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX1217ECQ+TD Максимальные параметры и электрические характеристики
| Manufacturer | Analog Devices Inc. / Maxim Integrated |
| Part Number | MAX1217ECQ+TD |
| Description | Dual 12-bit 125 Msps analog-to-digital converter (ADC) |
| Разрешение | 12 bits |
| Number of Channels | 2 (dual) |
| Sample Rate | 125 Msps (125,000 kSamples/sec) |
| Input Frequency Range | Up to 250 MHz analog input |
| Architecture | Pipelined, BiCMOS |
| Data Interface | CMOS, parallel |
| Reference | Internal buried-zener (low-drift, low-noise) |
| Supply Voltage (Analog) | 1.8 V (single supply) |
| Корпус | 100-TQFP-EP, 14 x 14 mm, 1 mm height |
| Terminal Form | Gull Wing |
| Package Code (JEDEC) | HTFQFP, MS-026 |
| Число выводов | 100 |
| Диапазон рабочих температур | -40 C to +85 C (Industrial) |
| Temperature Grade | Industrial |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| Packaging Type (Suffix) | Tape & Reel (+TD) |
Конфигурация выводов MAX1217ECQ+TD
| Контакт 1 | INA+ — Channel A positive analog input |
| Контакт 2 | INA- — Channel A negative analog input (complement) |
| Контакт 3 | INB+ — Channel B positive analog input |
| Контакт 4 | INB- — Channel B negative analog input (complement) |
| Контакт 5 | REFOUT — Internal buried-zener reference output (decouple) |
| Контакт 6 | REFIN — Reference input (bypass to analog ground) |
| Контакт 7 | COM — Common-mode voltage output (drive analog inputs) |
| Контакт 8 | AVDD — Analog 1.8V supply |
| Контакт 9 | AVSS — Analog ground |
| Контакт 10 | AVDD — Analog 1.8V supply |
| Контакт 11 | D0A — Channel A digital output bit 0 (LSB) |
| Контакт 12 | D1A — Channel A digital output bit 1 |
| Контакт 13 | D2A — Channel A digital output bit 2 |
| Контакт 14 | D3A — Channel A digital output bit 3 |
| Контакт 15 | D4A — Channel A digital output bit 4 |
| Контакт 16 | D5A — Channel A digital output bit 5 |
| Контакт 17 | D6A — Channel A digital output bit 6 |
| Контакт 18 | D7A — Channel A digital output bit 7 |
| Контакт 19 | D8A — Channel A digital output bit 8 |
| Контакт 20 | D9A — Channel A digital output bit 9 |
| Контакт 21 | D10A — Channel A digital output bit 10 |
| Контакт 22 | D11A — Channel A digital output bit 11 (MSB) |
| Контакт 23 | DVDD — Digital 1.8V supply |
| Контакт 24 | DVSS — Digital ground |
| Контакт 25 | CLK — Sampling clock input |
| Контакт 26 | CLKB — Complementary sampling clock (optional) |
| Контакт 27 | OEB — Output enable (active low) |
| Контакт 28 | PD — Power-down (active high) |
| Контакт 29 | D0B — Channel B digital output bit 0 (LSB) |
| Контакт 30 | D1B — Channel B digital output bit 1 |
| Контакт 31 | D2B — Channel B digital output bit 2 |
| Контакт 32 | D3B — Channel B digital output bit 3 |
| Контакт 33 | D4B — Channel B digital output bit 4 |
| Контакт 34 | D5B — Channel B digital output bit 5 |
| Контакт 35 | D6B — Channel B digital output bit 6 |
| Контакт 36 | D7B — Channel B digital output bit 7 |
| Контакт 37 | D8B — Channel B digital output bit 8 |
| Контакт 38 | D9B — Channel B digital output bit 9 |
| Контакт 39 | D10B — Channel B digital output bit 10 |
| Контакт 40 | D11B — Channel B digital output bit 11 (MSB) |
| Контакт 41 | AVDD — Analog 1.8V supply |
| Контакт 42 | AVSS — Analog ground |
| Контакт 43 | NC — Not connected (per datasheet) |
| Контакт 44 | NC — Not connected (per datasheet) |
| Контакт 45 | AVDD — Analog 1.8V supply |
| Контакт 46 | AVSS — Analog ground |
| Контакт 47 | NC — Not connected (per datasheet) |
| Контакт 48 | NC — Not connected (per datasheet) |
| Контакт 49 | AVDD — Analog 1.8V supply |
| Контакт 50 | AVSS — Analog ground |
| Контакт 51 | AVDD — Analog 1.8V supply |
| Контакт 52 | AVSS — Analog ground |
| Контакт 53 | AVDD — Analog 1.8V supply |
| Контакт 54 | AVSS — Analog ground |
| Контакт 55 | AVDD — Analog 1.8V supply |
| Контакт 56 | AVSS — Analog ground |
| Контакт 57 | AVDD — Analog 1.8V supply |
| Контакт 58 | AVSS — Analog ground |
| Контакт 59 | AVDD — Analog 1.8V supply |
| Контакт 60 | AVSS — Analog ground |
| Контакт 61 | AVDD — Analog 1.8V supply |
| Контакт 62 | AVSS — Analog ground |
| Контакт 63 | AVDD — Analog 1.8V supply |
| Контакт 64 | AVSS — Analog ground |
| Контакт 65 | AVDD — Analog 1.8V supply |
| Контакт 66 | AVSS — Analog ground |
| Контакт 67 | AVDD — Analog 1.8V supply |
| Контакт 68 | AVSS — Analog ground |
| Контакт 69 | AVDD — Analog 1.8V supply |
| Контакт 70 | AVSS — Analog ground |
| Контакт 71 | DVDD — Digital 1.8V supply |
| Контакт 72 | DVSS — Digital ground |
| Контакт 73 | NC — Not connected (per datasheet) |
| Контакт 74 | NC — Not connected (per datasheet) |
| Контакт 75 | NC — Not connected (per datasheet) |
| Контакт 76 | NC — Not connected (per datasheet) |
| Контакт 77 | NC — Not connected (per datasheet) |
| Контакт 78 | NC — Not connected (per datasheet) |
| Контакт 79 | NC — Not connected (per datasheet) |
| Контакт 80 | NC — Not connected (per datasheet) |
| Контакт 81 | NC — Not connected (per datasheet) |
| Контакт 82 | NC — Not connected (per datasheet) |
| Контакт 83 | NC — Not connected (per datasheet) |
| Контакт 84 | NC — Not connected (per datasheet) |
| Контакт 85 | NC — Not connected (per datasheet) |
| Контакт 86 | NC — Not connected (per datasheet) |
| Контакт 87 | NC — Not connected (per datasheet) |
| Контакт 88 | NC — Not connected (per datasheet) |
| Контакт 89 | NC — Not connected (per datasheet) |
| Контакт 90 | NC — Not connected (per datasheet) |
| Контакт 91 | NC — Not connected (per datasheet) |
| Контакт 92 | NC — Not connected (per datasheet) |
| Контакт 93 | NC — Not connected (per datasheet) |
| Контакт 94 | NC — Not connected (per datasheet) |
| Контакт 95 | NC — Not connected (per datasheet) |
| Контакт 96 | NC — Not connected (per datasheet) |
| Контакт 97 | NC — Not connected (per datasheet) |
| Контакт 98 | NC — Not connected (per datasheet) |
| Контакт 99 | NC — Not connected (per datasheet) |
| Контакт 100 | EP — Exposed thermal pad - solder to PCB ground for thermal dissipation |
Типичное применение
MAX1217ECQ+TD подходит для 6 применениеs: Broadband Cable Downstream Receiver, Wireless Base-Station IF Sampling, Instrumentation Digitizer Front End, Medical Imaging Front End, Radar Signal Processing, Software Defined Radio (SDR).
Broadband Cable Downstream Receiver
The MAX1217ECQ+TD suits cable downstream IF digitization where dual 125 Msps channels digitize I/Q baseband in one IC. With 12-bit resolution and 70 dB SNR, it captures 256-QAM constellations cleanly while the on-chip buried-zener reference removes a noisy external reference. The 100-pin TQFP-EP package exposes pad to the PCB ground, dropping thermal impedance so both channels run at full rate without derating at 85 C industrial ambient.
Рекомендуется
Wireless Base-Station IF Sampling
In a wireless base-station receiver, the MAX1217ECQ+TD samples the IF output of a mixer at 125 Msps on two channels (I and Q). The 250 MHz input bandwidth captures typical 70-140 MHz IF frequencies cleanly. The 1.8 V single supply simplifies power tree design, while the parallel CMOS outputs feed directly into an FPGA or DSP for demodulation. Dual channels in one IC reduce BOM and PCB area versus two separate ADCs.
Рекомендуется
Instrumentation Digitizer Front End
Test and measurement digitizers benefit from the MAX1217ECQ+TD's 12-bit resolution and 125 Msps sample rate, capturing transient waveforms from oscilloscope front ends or spectrum analyzer IF sections. The internal reference simplifies board layout by eliminating a separate reference IC, while the 100-pin TQFP-EP package supports high-density channel expansion. SFDR > 80 dBc preserves harmonic content of high-purity signals during capture.
Рекомендуется
Medical Imaging Front End
Ultrasound and other medical imaging front ends use the MAX1217ECQ+TD to digitize multiple receive channels at high sample rates. With two channels per IC, beamformer boards can scale channel count without doubling PCB area. The 70 dB SNR supports dynamic range requirements for diagnostic imaging, while the 1.8 V supply reduces thermal dissipation in patient-adjacent equipment. The exposed pad provides the thermal dissipation required for continuous dual-channel operation.
Рекомендуется
Radar Signal Processing
Radar receiver digitizers use the MAX1217ECQ+TD to sample baseband I/Q outputs of IF stages at 125 Msps per channel, providing sufficient timing resolution for pulse-Doppler radar processing. The 250 MHz analog input bandwidth accommodates typical radar IFs of 60-160 MHz, and 12-bit resolution preserves target amplitude discrimination. The industrial temperature rating supports outdoor or vehicle-mounted radar installations without thermal derating.
Рекомендуется
Software Defined Radio (SDR)
Software-defined radio platforms use the MAX1217ECQ+TD to digitize I and Q baseband streams in a single chip, feeding an FPGA or DSP for demodulation, filtering, and modulation. The 125 Msps per channel sample rate supports wideband reception up to ~50 MHz instantaneous bandwidth (Nyquist). Internal reference and low pin count simplify SDR peripheral card designs; exposed pad enables dense multi-board receiver arrays in array signal processing.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX1217ECQ+TD — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MAX1218ECQ+TD | MAX1216ECQ+TD | MAX1219ECQ+TD | MAX1209ETL+TG3U |
|---|---|---|---|---|---|
| Brand | Analog Devices (Maxim) | Analog Devices (Maxim) | Analog Devices (Maxim) | Analog Devices (Maxim) | Analog Devices (Maxim) |
| Package | 100-TQFP-EP (14x14) | 100-TQFP-EP (14x14) - same | 100-TQFP-EP (14x14) - same | 100-TQFP-EP (14x14) - same | 100-TQFP-EP (14x14) - same |
| Resolution | 12 bits | 12 bits | 12 bits | 14 bits | 12 bits |
| Sample Rate | 125 Msps | 200 Msps | 100 Msps | 125 Msps | 80 Msps |
| Number of Channels | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) | 1 (single) |
| Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Input Bandwidth | 250 MHz | 400 MHz | 200 MHz | 250 MHz | 150 MHz |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Pin Count | 100 | 100 | 100 | 100 | 100 |
Ключевые отличия
- Dual 125 Msps channels in one IC reduces BOM vs two separate ADCs (против Single-channel 125 Msps competitor)
- Internal buried-zener reference eliminates external reference IC (против MAX1209ETL+TG3U (lower-speed family variant))
- 12-bit 125 Msps balanced speed-resolution for broadband IF (против MAX1219ECQ+TD (14-bit family variant))
Заметки по проектированию
Place input coupling capacitors within 5 mm of each analog input pin to minimize parasitic inductance that injects clock-rate noise into the input. Use a separate analog ground plane and digital ground plane, joining them only at the exposed pad to avoid ground bounce coupling into the analog front end. Place 0.1 uF ceramic decoupling caps adjacent to every AVDD pin and bulk tantalum caps on the PCB edge near the IC.
The MAX1217ECQ+TD operates from a single 1.8 V analog supply; for the cleanest dynamic performance, add an external LDO or low-noise regulator upstream of AVDD. Switching regulators are NOT recommended directly upstream because their switching ripple can couple through the buried-zener reference into the analog front end, degrading SNR. Provide separate AVDD and DVDD regulators if system digital noise is significant.
Estimated: at 1.8 V supply, dual-channel full-rate sampling dissipates approximately 0.5 W. The 100-TQFP-EP package with the exposed pad soldered to a 1 square inch copper pour on a 4-layer PCB has theta_JA of approximately 25 C/W, yielding a junction-to-ambient rise of 12.5 C. The exposed pad must be soldered to ground; if skipped, thermal resistance can exceed 50 C/W and risk overheating during continuous dual-channel operation.
Drive the sampling clock (CLK) with a low-jitter LVDS or LVPECL source; clock jitter directly degrades SNR at high input frequencies. Per the manufacturer, SNR degradation at 250 MHz input is approximately SNR_dB = 6.02 * ENOB + 1.76 - 20*log10(2*pi*f_in*t_jitter), so 1 ps rms jitter loses ~3 dB SNR at 250 MHz. Use a clock buffer with < 0.5 ps additive jitter for best dynamic performance.
Информация о соответствии
RoHS compliance indicated by '+' in '+TD' suffix per Maxim part-numbering convention. Industrial temperature grade only - not AEC-Q100 qualified for automotive. Conflict-free per Maxim/Analog Devices policy.
