MAX3232MPWREP - 3V-5.5V Dual RS-232 Transceiver | Texas Instruments
Артикул: MAX3232MPWREP ✓ АктивенMAX3232MPWREP Обзор
An RS-232 transceiver is the interface between a host controller and a serial-port connector. It combines transmit and receive functions on one device, translates digital logic levels to RS-232 signal levels, and includes the charge-pump circuitry required to generate the bipolar voltage used by a driver. The MAX3232 therefore belongs to the RS-232 transceiver, interface IC, communication IC, and semiconductor hierarchy.
The principal features include a 3 V to 5.5 V supply range, 250 kbps operation, two line drivers, two line receivers, and pin-to-pin ±15 kV ESD protection on the serial-port connection pins, including ground. The enhanced-product ordering code identifies this variant as a high-reliability-enhanced product, making it suitable for applications that require more stringent environmental resilience than the standard commercial MAX3232 offering.
The device implements two independent communication paths in one package. A host UART can transmit through either driver and receive data through either receiver, while the integrated charge pumps support RS-232 voltage levels from a single low-voltage supply. Although the analog interface tolerates the RS-232 signaling environment, the digital logic side remains compatible with ordinary CMOS-style host logic.
Typical uses include industrial serial adapters, point-of-sale equipment, data-acquisition systems, industrial controls, and embedded instrumentation. The dual-channel arrangement is especially useful when a system needs both transmit and receive paths in a compact area and cannot justify separate unidirectional driver and receiver devices.
Circuit design should follow the manufacturer's pin description table when assigning supply, charge-pump, driver, receiver, and ground connections. Keep external charge-pump capacitors close to their associated pins, provide the required supply decoupling, and route exposed connector-side nets away from sensitive logic where practical. Confirm the exact pin functions and thermal limits in the manufacturer datasheet before layout signoff.
This page combines the device's RS-232 architecture, interface parameters, application guidance, verified-source links, and drop-in replacement analysis into a design-focused reference. It highlights package compatibility, external capacitor requirements, ESD considerations, and the differences between the enhanced and standard MAX3232 families for faster engineering selection.
Аналоги без доработки для MAX3232MPWREP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MAX3232MPWREP (тот же форм-фактор и посадочное место) — отличается по Package, ESD Protection, ESD Protection Scope, Maximum Data Rate, Number of Drivers.
MAX3232ECWP
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX3232MPWREP Характеристики
| Product Type | Dual RS-232 line transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Number of Communication Channels | 2 channels |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| ESD Protection Scope | Pin-to-pin on serial-port connection pins, including ground |
| Interface Standard | TIA/EIA-232-F |
| Charge-Pump Circuit | Dual charge-pump circuit |
| Корпус | 16-pin TSSOP |
| Тип монтажа | Surface mount |
| Product Variant | Enhanced Product |
| External Charge-Pump Capacitors | 4 small capacitors |
Руководство по цоколевке MAX3232MPWREP в корпусе 16-pin tssop
Цоколевка для MAX3232MPWREP (корпус 16-pin tssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для MAX3232MPWREP.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MAX3232MPWREP подходит для 6 применениеs: Industrial RS-232 Data Acquisition, Point-of-Sale Terminal Interface, Embedded Service and Configuration Port, Instrumentation and Test Equipment, Serial Port Expansion, Robotics Controller Communication.
Industrial RS-232 Data Acquisition
The MAX3232MPWREP suits industrial data-acquisition equipment that combines a host UART with two external RS-232 ports. Its 3 V to 5.5 V operating range supports low-voltage digital systems, while the 250 kbps maximum data rate is appropriate for supervisory commands, configuration traffic, and sensor-controller communications. Two drivers and two receivers provide transmit and receive paths in one 16-pin TSSOP device. The ±15 kV ESD rating on serial-port pins, including ground, adds protection at connector-facing nodes where cables and external equipment can introduce electrostatic discharge. The integrated dual charge pump also reduces the need for a separate RS-232 voltage-generation circuit, simplifying the interface portion of the control board.
Рекомендуется
Point-of-Sale Terminal Interface
The MAX3232MPWREP is well suited to point-of-sale equipment that must bridge a low-voltage controller to an RS-232 peripheral such as a printer, scanner, or customer display. A single device provides two drivers and two receivers, allowing one logic port to manage multiple serial directions while conserving board area. Operation from 3 V to 5.5 V supports common embedded control platforms, and the 250 kbps rate is sufficient for transactional commands and configuration exchanges. Connector-side ±15 kV ESD protection is especially valuable in retail environments where equipment may be connected and disconnected while powered or grounded through external accessories.
Рекомендуется
Embedded Service and Configuration Port
The MAX3232MPWREP can implement a compact service interface for embedded controllers, test fixtures, and remote-maintenance equipment. The two-channel arrangement supports bidirectional communication without allocating separate packages for transmission and reception, and the 250 kbps maximum rate provides ample margin for command, log, and firmware-related service traffic. Running from 3 V to 5.5 V lets the interface share regulated rails with the host logic. When the service connector is exposed to user-accessible cabling, the ±15 kV ESD protection on the RS-232 connection pins helps contain electrostatic discharge at the board entry point rather than relying solely on external protection networks.
Рекомендуется
Instrumentation and Test Equipment
The MAX3232MPWREP is appropriate for laboratory and field instrumentation that requires a legacy RS-232 connection to a host computer or controller. Two integrated drivers and two receivers permit two RS-232 channels within a restricted board footprint, while the device's 3 V to 5.5 V supply range supports modern mixed-signal systems. The 250 kbps data rate is suitable for command traffic, measurement status, configuration files, and diagnostic data rather than high-volume continuous transfers. Connector-side ±15 kV ESD protection adds a useful interface-layer safeguard where test leads or field cables can accumulate electrostatic charge.
Рекомендуется
Serial Port Expansion
The MAX3232MPWREP can expand a host with a limited number of UART channels by providing two complete RS-232 paths in a 16-pin TSSOP package. Its dual charge-pump circuitry generates the bipolar signal levels internally, avoiding the external transistor networks associated with simpler RS-232 designs. The 3 V to 5.5 V operating range integrates easily with low-voltage embedded logic, and 250 kbps provides sufficient bandwidth for instrument, peripheral, and legacy-system traffic. The same TSSOP footprint as the documented MAX3232E option can simplify product-family board planning when the environmental requirements of that alternative match the finished system.
Рекомендуется
Robotics Controller Communication
The MAX3232MPWREP can support RS-232 communication between a robot controller and peripheral modules using legacy serial interfaces. The dual-channel structure allows simultaneous command transmission and status reception, while the 250 kbps rate is more than adequate for supervisory control and periodic diagnostic data. Its 3 V to 5.5 V supply operation is compatible with common embedded controller rails. In installations where motor wiring and external service connectors share the enclosure, the ±15 kV ESD protection on connector-facing pins offers additional robustness at the RS-232 boundary, although normal board-layout practices for noise and surge control remain necessary.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX3232MPWREP — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MAX3232ECWP |
|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | Dual RS-232 transceiver | Improved MAX3232E direct drop-in family |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| ESD Protection | ±15 kV pin-to-pin on serial-port pins | ±15 kV pin-to-pin on serial-port pins |
| Interface Standard | TIA/EIA-232-F | TIA/EIA-232-F |
Ключевые отличия
- Enhanced-product ordering option (против MAX3232ECWP)
- Identical core RS-232 operating performance (против MAX3232ECWP)
- Matched TSSOP board footprint (против MAX3232ECWP)
Заметки по проектированию
Place the four required external charge-pump capacitors close to their designated MAX3232MPWREP pins and use the shortest practical ground returns. Keep the connector-side driver and receiver traces away from clock, sensing, and precision analog paths. Because the device operates from 3 V to 5.5 V, include local supply decoupling and route it directly to the device ground reference to minimize noise coupling into the RS-232 interface.
Do not treat the MAX3232MPWREP and a generic RS-232 transceiver as interchangeable without verifying every pin, supply requirement, and external capacitor value. The MAX3232E family is described by Texas Instruments as an improved direct drop-in replacement for MAX3232, but the specific ordering suffix must also provide the required package and environmental grade. Validate logic levels, driver slew behavior, receiver thresholds, and charge-pump capacitor tolerances against the manufacturer datasheet.
Keep the RS-232 connector-side nets physically separated from sensitive board areas and provide a controlled ground reference between the interface and the host system. Although the device provides ±15 kV ESD protection on the serial-port pins, connector placement, chassis grounding, cable design, and external surge or ESD protection can still influence system-level immunity. Use the manufacturer pin-configuration and application diagrams to verify the separation between charge-pump, logic-side, and connector-side components.
Информация о соответствии
The manufacturer identifies the device as an enhanced product and states that it meets TIA/EIA-232-F. Specific environmental and material-compliance claims were not stated and remain unknown.