MC56F8346VFVER2 - 16-Bit 60MHz DSC, 128KB Flash | NXP
Артикул: MC56F8346VFVER2 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $29.26 | $29,26 |
| 10 | $26.4 | $264,00 |
| 100 | $23.5 | $2.350,00 |
| 500 | $21.2 | $10.600,00 |
| 1.000 | $19.1 | $19.100,00 |
MC56F8346VFVER2 Обзор
A digital signal controller (DSC) is a hybrid MCU/DSP architecture that fuses a C-programmable microcontroller core with DSP-class multiply-accumulate (MAC) units and single-cycle arithmetic logic. In the system hierarchy it sits above general-purpose microcontrollers and below dedicated DSPs, bridging deterministic control loops (typical of MCUs) with high-throughput signal processing (typical of DSPs). The 56800E core also exposes Harvard-style bus structures and on-chip program/data memory, so firmware can run from internal Flash without external bus glue.
Key features include 128 KB of Flash, 12 KB of unified RAM, two 4-channel Quadrature Decoders supporting encoder feedback from brushless motors, multiple serial communication interfaces (SCI, SPI, I2C), a CAN 2.0 B controller, four 12-bit ADCs, and up to 62 GPIO. The 144-LQFP footprint exposes all peripheral pins while supporting industrial temperature operation (-40 °C to +105 °C minimum), sufficing harsh-environment deployments with thermal headroom typical of motor-drive enclosures.
Application highlights include industrial variable-frequency drives, digital servo amplifiers, uninterruptible power supplies (UPS), photovoltaic inverters, smart appliance motor control, and precision instrumentation. Engineers typically choose this DSC when deterministic PWM timing plus low-latency ADC sampling is required for closed-loop control. Design should observe the datasheet's reference decoupling, ground-plane, and unused-pin tie-offs to ensure ADC and PWM noise immunity in mixed-signal layouts.
Аналоги без доработки для MC56F8346VFVER2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC56F8346VFVER2 (тот же форм-фактор и посадочное место) — отличается по Package, Maximum CPU Frequency, ADC, Program Flash, Core.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC56F8356MFVE
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MC56F8347MPYE
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$16.4063 / шт.
Открыть даташит →MC56F8347VPY60
✅ Прямая замена✓ В наличии
$19.8 / шт.
Открыть даташит →MC56F82726VLF
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.18 / шт.
Открыть даташит →MC56F82723VLC
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.45 / шт.
Открыть даташит →MC56F8346VFVER2 Максимальные параметры и электрические характеристики
| Core Architecture | 56800E (16-bit DSC) |
| Instruction Set | CISC |
| Разрядность шины данных | 16-bit |
| Maximum CPU Frequency | 60 MHz (60 MIPS) |
| Program Flash Memory | 128 KB (64K x 16) |
| Program Memory Size | 136 KB (68K x 16) |
| RAM Size | 6K x 16 (12 KB) |
| Number of I/O Pins | 62 |
| Корпус | 144-LQFP (20x20 mm) |
| Напряжение питания | 3.3 V |
| ADC | 4x 12-bit (quad 4-pin mux, simultaneous sampling) |
| Quadrature Decoders | 2x 4-input |
| Communication Interfaces | SCI, SPI, I2C, CAN 2.0B |
| Oscillator Type | External |
| Тип монтажа | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Статус RoHS | Compliant |
Руководство по цоколевке MC56F8346VFVER2 в корпусе 144-lqfp (20x20 mm)
Цоколевка для MC56F8346VFVER2 (корпус 144-lqfp (20x20 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC56F8346VFVER2.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC56F8346VFVER2 подходит для 6 применениеs: Industrial Variable-Frequency Drives (VFD), Digital Servo and Robotics Drives, Uninterruptible Power Supplies (UPS) and Inverters, Smart Appliance Motor Control, Precision Instrumentation and Test Equipment, Power Conversion and SMPS Control.
Industrial Variable-Frequency Drives (VFD)
The MC56F8346VFVER2 fits VFD controllers because its 60 MHz 56800E core delivers the deterministic throughput needed for field-oriented control (FOC) computations within each PWM period. The two 4-input Quadrature Decoders accept encoder feedback from induction or permanent-magnet motors without external logic, while the four 12-bit ADCs sample phase currents simultaneously to prevent aliasing at high PWM rates. At 128 KB of Flash the part holds a full sensorless or sensored FOC library plus a UART/Modbus protocol stack. Place a 1 kHz to 20 kHz PWM frequency on the PWM channels and tune the control loop in firmware.
Рекомендуется
Digital Servo and Robotics Drives
Robotics servo loops demand deterministic interrupt response that the MC56F8346VFVER2 delivers via its 56800E core. The combined ADC and PWM synchronization through Timer C channels 2 and 3 (per NXP datasheet) lets the controller execute current/torque loops in microsecond latency. With 62 GPIO plus two Quadrature Decoders the part handles multi-axis feedback without external FPGAs. At full 60 MHz the part is recommended when servo bandwidth exceeds 5 kHz; below that, smaller MC56F82xxx cousins suffice.
Рекомендуется
Uninterruptible Power Supplies (UPS) and Inverters
The MC56F8346VFVER2 is well matched to UPS and solar inverter control loops because the ADC/PWM synchronization through Timer C accommodates the power-conversion timing required for sinusoidal PWM. Operating from 3.3 V with on-chip CAN facilitates BMS communication; SPI connects to gate-driver ICs (e.g. NXP MC33937). The 128 KB Flash supports complete DSP-based inverter firmware including MPPT, grid-synchronization, and anti-islanding protection. Estimated: at 60 MIPS, an FOC update plus inner current loop completes in under 5 us per PWM period.
Рекомендуется
Smart Appliance Motor Control
In washing-machine drum motors, refrigerator compressors, and HVAC blowers, the MC56F8346VFVER2 provides cost-efficient sensorless or Hall-sensor FOC at up to 60 MHz. The CAN 2.0B interface supports modern appliance bus protocols and the SCI bridges to legacy UART peripherals. With 62 GPIO plus on-chip timers, the part can also drive user-interface LEDs and read keypad panels. The 144-LQFP package distributes heat well enough to operate without a heatsink in typical appliance enclosures up to 70 °C ambient.
Рекомендуется
Precision Instrumentation and Test Equipment
Test instruments with real-time DSP processing benefit from the MC56F8346VFVER2 because the 56800E core supports single-cycle MAC operations suited to FFTs, FIR filters, and PID loops. The 12-bit ADC with quad simultaneous sampling ensures accurate measurement of multi-channel analog waveforms at high sample rates. The 144-LQFP footprint on a 4-layer PCB with proper ground plane yields ADC SNR close to datasheet typical values. Estimated ADC ENOB at 1 Msps is approximately 11 bits under clean layout.
Рекомендуется
Power Conversion and SMPS Control
Switched-mode power supplies (SMPS) using the MC56F8346VFVER2 benefit from the deterministic 60 MHz operation and ADC/PWM timing synchronization via Timer C. The 56800E core handles digital compensator algorithms (type-II, type-III) at high switching frequencies (100 kHz to 1 MHz). With CAN, the supply can participate in PMBus or CAN-based power-system telemetry networks. The 144-LQFP enables layout reuse across product variants by exposing all peripherals even when the application uses only a subset.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC56F8346VFVER2 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC56F8356MFVE | MC56F8347MPYE | MC56F8347VPY60 | MC56F82726VLF | MC56F82723VLC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20 mm) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Core | 56800E (16-bit DSC) | 56800E (same) | 56800E (same) | 56800E (same) | 56800EX (newer) | 56800EX (newer) |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 100 MHz | 100 MHz |
| Program Flash | 128 KB | 256 KB (+100%) | 256 KB (+100%) | 256 KB (+100%) | 128 KB (same) | 128 KB (same) |
| RAM | 12 KB | 12-32 KB | 32 KB | 32 KB | 16 KB | 16 KB |
| ADC | 4x 12-bit (simultaneous) | 4x 12-bit | 4x 12-bit | 4x 12-bit | 2x 12-bit | 2x 12-bit |
| CAN 2.0B | Yes | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- Quadrature Decoder count and motor-control integration (против MC56F8146 family)
- Drop-in 256 KB Flash upgrade with identical pinout (против MC56F8356MFVE)
- Modern 56800EX core upgrade path on the same footprint (против MC56F82726VLF)
Заметки по проектированию
Per the NXP 56F8346 datasheet, place 100 nF decoupling capacitors as close as possible to every VDD/VDDA pin and bulk 10 µF tantalum or ceramic caps near each power pin pair. Use a single continuous ground plane split only under the analog domain (separate AGND/DGND tied at the device pin). The 144-LQFP package's exposed thermal slug should receive at least 4 vias to the inner power-plane copper to keep junction temperature within safe operating area at full 60 MHz and full ADC sample rate.
Do not float unused GPIO pins on the MC56F8346VFVER2; configure them as outputs or tie them to a defined logic level. Float pins can cause supply-current spikes during transitions and may trigger spurious interrupts. When migrating from 56F8146 to 56F8346 firmware, remember the 56F8346 has two Quadrature Decoders versus one on the 56F8146 - re-enable only the active decode channels in your firmware to avoid phantom interrupts. Always apply the NXP errata list before locking production firmware.
Keep ADC analog traces short and shielded from PWM switching traces; the simultaneous-sampling 12-bit ADC at 1 Msps loses approximately 1 ENOB with every 5 cm of unshielded trace near a switching signal. Use guard rings around sensitive analog inputs. Estimated: at 0-70 °C ambient, ADC ENOB at 500 ksps remains near 11.4 bits under proper layout; at 1 Msps expect 10.7-11.0 ENOB. Avoid routing clocked signals (e.g. CAN, PWM) directly across analog return paths.
Информация о соответствии
RoHS compliant per NXP product page. Not AEC-Q100 qualified (industrial-grade part). For automotive-grade DSCs, consider NXP's S32K or MPC56xx Power Architecture families.
