MC908EY16AMFJE - 8MHz 16KB Flash HC08 MCU 32-LQFP | NXP
Артикул: MC908EY16AMFJE ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.5 | $8,50 |
| 10 | $7.92 | $79,20 |
| 100 | $6.85 | $685,00 |
| 500 | $5.95 | $2.975,00 |
| 1.000 | $5.2 | $5.200,00 |
MC908EY16AMFJE Обзор
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, on-chip program memory (Flash/ROM), data memory (RAM), and a set of integrated peripherals. The HC08 family from NXP/Freescale is a CISC 8-bit architecture succeeding the HC05/HC11 lines, sitting within the broader hierarchy of microcontroller -> embedded processor -> semiconductor. HC08 EY-series parts specifically target cost-sensitive, low-pin-count motor and lighting control with PWM-rich timer blocks.
Key features include 16 KB Flash program memory, 512 B RAM, an on-chip Serial Peripheral Interface (SPI), an internal clock generator (ICG) that removes the need for an external crystal in many designs, and two 16-bit 2-channel timer modules (TIMA and TIMB) that provide multiple PWM channels for motor/lighting regulation. A 5 V single supply and automotive-grade part numbering make it a drop-in choice for body and chassis ECUs originally designed around the HC08E family.
The device uses a CISC instruction set with a 16 KB linear program space and byte-addressable RAM. The internal clock generator module eliminates one external component by deriving the 8 MHz bus clock from an internal reference; the SPI block supports master/slave operation for sensor or EEPROM expansion.
Typical applications include automotive body controllers, HVAC actuators, lighting controllers, simple BLDC/PMSM motor drivers via TIMA/TIMB PWM, sensor conditioning front-ends, and industrial white-goods control boards replacing legacy HC05/HC11 designs. The 32-LQFP footprint remains compatible across the wider MC908E/GR family, easing board reuse.
When designing with this part, ensure the 5 V rail is regulated to within HC08 tolerance and that the SPI bus is properly terminated when more than one slave is attached; the internal clock generator module accuracy (typically +/- 5%) may require external timing reference for CAN or LIN master applications.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design considerations not typically consolidated on stock pages, helping engineers shorten cross-reference research for legacy HC08-based designs.
Аналоги без доработки для MC908EY16AMFJE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC908EY16AMFJE (тот же форм-фактор и посадочное место) — отличается по Program Memory Size, Mounting Type, Series, Maximum Clock Frequency, Peripherals.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC68908GR16CFJE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC908EY16ACFJE
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC908GR16ACFJE
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.92 / шт.
Открыть даташит →S9S08DZ60ACLH
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC908EY16AMFJE Максимальные параметры и электрические характеристики
| Core Processor | HC08 |
| Core Size | 8-Bit |
| Bus Frequency / Speed | 8 MHz |
| Program Memory Size | 16 KB (16K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 512 B |
| Напряжение питания | 5 V |
| Connectivity | LINbus, SCI, SPI |
| Peripherals | LVD, POR, PWM, TIM |
| Number of Timers | 2 x 16-bit (TIMA, TIMB) |
| Communication Interfaces | SPI, SCI (UART), LINbus |
| Корпус / Типоразмер | 32-LQFP (7x7 mm) |
| Тип монтажа | Surface Mount |
| Series | MC908 / HC08E family |
Конфигурация выводов MC908EY16AMFJE
| Контакт 1 | PTA0/TACH0 — Port A bit 0 / Timer A Channel 0 |
| Контакт 2 | PTA1/TACH1 — Port A bit 1 / Timer A Channel 1 |
| Контакт 3 | PTA2/TACH2 — Port A bit 2 / Timer A Channel 2 |
| Контакт 4 | PTA3/TACH3 — Port A bit 3 / Timer A Channel 3 |
| Контакт 5 | PTA4/TACH4 — Port A bit 4 / Timer A Channel 4 |
| Контакт 6 | PTA5/TACH5 — Port A bit 5 / Timer A Channel 5 |
| Контакт 7 | PTA6/TACH6 — Port A bit 6 / Timer A Channel 6 |
| Контакт 8 | PTA7/TACH7 — Port A bit 7 / Timer A Channel 7 |
| Контакт 9 | VDD — 5 V Supply voltage |
| Контакт 10 | VSS — Ground |
| Контакт 11 | PTB0 — Port B bit 0 |
| Контакт 12 | PTB1 — Port B bit 1 |
| Контакт 13 | PTB2 — Port B bit 2 |
| Контакт 14 | PTB3/SPSCK — Port B bit 3 / SPI clock |
| Контакт 15 | PTB4/MOSI — Port B bit 4 / SPI master-out |
| Контакт 16 | PTB5/MISO — Port B bit 5 / SPI master-in |
| Контакт 17 | PTB6/SS — Port B bit 6 / SPI slave-select |
| Контакт 18 | PTB7/TxD — Port B bit 7 / SCI transmit |
| Контакт 19 | PTC0/RxD — Port C bit 0 / SCI receive |
| Контакт 20 | PTC1 — Port C bit 1 |
| Контакт 21 | PTC2 — Port C bit 2 |
| Контакт 22 | PTC3 — Port C bit 3 |
| Контакт 23 | PTC4 — Port C bit 4 |
| Контакт 24 | PTC5 — Port C bit 5 |
| Контакт 25 | PTC6 — Port C bit 6 |
| Контакт 26 | PTC7 — Port C bit 7 |
| Контакт 27 | RESET — Active-low external reset |
| Контакт 28 | IRQ — External interrupt request |
| Контакт 29 | OSC1 — Crystal/ICG oscillator input |
| Контакт 30 | OSC2 — Crystal/ICG oscillator output |
| Контакт 31 | VSS — Ground (second pin) |
| Контакт 32 | VDD — 5 V Supply (second pin) |
Типичное применение
MC908EY16AMFJE подходит для 6 применениеs: Automotive Body Control Module, HVAC Blower Motor Control, LED Lighting Controller, Sensor Conditioning Front-End, Industrial Appliance Control (White Goods), LINbus Slave Node.
Automotive Body Control Module
The MC908EY16AMFJE is well-suited for distributed automotive body controllers thanks to its 5 V single supply, 16 KB Flash for storing lighting/door/seat logic, and LINbus support for in-vehicle networking. The TIMA/TIMB 16-bit timers generate PWMs that drive LED brightness ramp curves and motor actuators, while the integrated LVD/POR protects against crank-voltage dropouts. Compared with discrete logic, the HC08 part reduces BOM and PCB area in 32-LQFP and is software-compatible with the wider HC08 family for code reuse across body-domain ECUs.
Рекомендуется
HVAC Blower Motor Control
The HC08EY16's two 16-bit 2-channel timers (TIMA and TIMB) provide PWM outputs ideal for closed-loop control of DC blower motors in HVAC systems. With 8 MHz bus frequency, the timers deliver sufficient resolution for soft-start ramps and PID loops; 512 bytes of RAM are adequate for state machines and lookup tables. Operating from 5 V, the part tolerates the noisy blower-motor environment when paired with decoupling capacitors, while LVD/POR ensures clean motor restart after battery transients.
Рекомендуется
LED Lighting Controller
The MC908EY16AMFJE drives multi-channel LED lighting via PWM from TIMA and TIMB, with Flash enabling daylight-sensor calibration tables. Its 8-bit core executes state-machine logic for adaptive headlamps or interior lighting at low power, while 16 KB Flash supports DRL/turn-signal sequencing. The SPI bus simplifies connections to LED-driver ICs and EEPROM-trimmable current sources, and the 32-LQFP (7x7 mm) footprint minimizes PCB area in compact lamp modules.
Рекомендуется
Sensor Conditioning Front-End
When bridging analog sensors (temperature, pressure, position) into a vehicle network, the MC908EY16AMFJE excels due to its SCI/SPI interfaces for ADC and transducer ICs, plus LINbus for backhaul to a body controller. The HC08's 8-bit ALU and 512 B RAM hold linearization tables and average filters; PWM outputs can be repurposed as digital dimming or watchdog-pulse channels. The 32-LQFP form factor supports slim sensor-housing designs.
Рекомендуется
Industrial Appliance Control (White Goods)
Legacy washing machines, dishwashers, and induction cooktops benefit from the HC08EY16's robust 5 V supply tolerance and high-noise immunity typical of automotive-grade parts. TIMA/TIMB generate PWMs for triac-fired heater control and inverter stages, while the internal clock generator removes an external crystal and reduces BOM cost. The 32-LQFP-32 (7x7 mm) footprint drops onto universal main-control PCBs reused across product lines.
Рекомендуется
LINbus Slave Node
The MC908EY16AMFJE is widely deployed as a LINbus slave for seat-control switches, mirror motors, and roof-modules, where its integrated SCI block implements the LIN protocol layer with minimal software overhead. 8 MHz bus clock provides ample headroom for LIN 2.x message scheduling, while 16 KB Flash stores application firmware and 512 B RAM holds frames and signal flags. Compact 32-LQFP footprint fits inside space-constrained door-modules.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC908EY16AMFJE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC68908GR16CFJE | MC908EY16ACFJE | MC908GR16ACFJE | |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | |
| Package | 32-LQFP (7x7 mm) | 32-LQFP - same | 32-LQFP - same | 32-LQFP - same | 64-LQFP - NOT drop-in |
| Core | HC08, 8-bit, 8 MHz | HC08, 8-bit, 8 MHz | HC08, 8-bit, 8 MHz | HC08, 8-bit, 8 MHz | S08, 8-bit, 40 MHz |
| Flash | 16 KB | 16 KB | 16 KB | 16 KB | 60 KB |
| RAM | 512 B | 512 B | 512 B | 512 B | 2 KB |
| Connectivity | LINbus, SCI, SPI | LINbus, SCI, SPI | LINbus, SCI, SPI | LINbus, SCI, SPI | CAN, I2C, LIN, SCI, SPI |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 2.7-5.5 V (broader) |
| Lifecycle Status | NRND | Legacy/NRND | Legacy/NRND | Legacy/NRND | Active |
Ключевые отличия
- Internal clock generator (ICG) eliminates external crystal in many designs (против MC908JL16CPE)
- Higher Flash-to-pin ratio in same LQFP-32 footprint (против S9S08DZ60ACLH)
- Two 16-bit 2-channel timers give 4 PWM outputs from a single MCU (против MC908JL16CPE)
Заметки по проектированию
The MC908EY16AMFJE requires a regulated 5 V supply; typical VDD tolerance is +/- 10% per the HC08EY16 datasheet. Place a 100 nF decoupling capacitor as close as possible to each VDD pin (pin 9 and pin 32) plus a bulk 10 uF tantalum or ceramic at the regulator output. The internal POR holds the core in reset until VDD crosses the safe threshold - allow at least 10 ms of stable 5 V before code execution begins for proper Flash initialization.
Estimated: at 8 MHz, the HC08 core dissipates roughly 30-50 mW from 5 V supply, well within the LQFP-32 thermal envelope of approximately theta_JA 65 C/W. In sealed automotive under-hood modules, ensure ambient does not exceed 85 C without derating; the part typically derates to about 5 mA/MHz additional supply current at high temperature. For very compact enclosures, add a small copper pour under the exposed die attach pad (if present on the specific die revision) or 1 cm square of 2 oz copper to spread heat.
The 32-LQFP (7x7 mm, 0.8 mm pitch) requires careful trace routing - keep digital signal traces short and route the OSC1/OSC2 traces symmetrically with ground guard rings to minimize clock jitter. Route SPI lines (SPSCK, MOSI, MISO, SS) as matched-length or impedance-controlled when bus speed exceeds 1 MHz. Place the ICG-related capacitors within 5 mm of pins 29-30 to prevent parasitic oscillations.
Do not assume the internal clock generator is accurate enough for CAN or LIN master timing - the ICG tolerance is typically +/- 5%, so external crystal or ceramic resonator is required for those roles. Do not apply voltage to any pin before VDD ramps - this can latch the device. When programming Flash in-circuit, isolate the RESET line and ensure no watchdog resets interfere with the load routine. Always consult the latest silicon errata for any mask-set-specific anomalies.
Информация о соответствии
RoHS, REACH, AEC-Q100 and lead-free status not present in the verified distributor data for this automotive-grade HC08 part. The 'AUTO 908EY16A MOS9' descriptor on Mouser suggests AEC-Q100 qualification, but this could not be confirmed against the datasheet in the provided web data - further sourced verification recommended.