MC9RS08LA8CLF - 8KB Flash 8-Bit RS08 MCU w/ LCD | NXP
Артикул: MC9RS08LA8CLF ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $4.92 | $4,92 |
| 10 | $4.43 | $44,30 |
| 100 | $3.94 | $394,00 |
| 500 | $3.55 | $1.775,00 |
| 1.000 | $3.16 | $3.160,00 |
MC9RS08LA8CLF Обзор
An 8-bit microcontroller (MCU) is a small, self-contained computing core built around an 8-bit data path, flash program memory, on-chip RAM, peripherals, and I/O. MCUs form the bottom of the embedded-computing hierarchy: 8-bit core -> microcontroller -> embedded processor -> semiconductor. The RS08 family is a streamlined HC08 subset aimed at ultra-low-cost LCD applications with active power saving modes for battery operation.
Key features include an 8-Bit RS08 Central Processor Unit running up to 20 MHz, 8KB (8K x 8) of Flash, 256 bytes of RAM, 31 I/O lines, and a segment LCD driver with integrated charge pump that supports bias-multiplexed glass up to 8x mode. The on-chip charge pump eliminates the need for an external LCD bias supply. An internal oscillator is provided; an external clock source is supported for applications requiring higher timing precision. The 48-LQFP package exposes the full peripheral set.
The MC9RS08LA8CLF uses the proven RS08 core with a 16-bit-wide internal architecture for fast byte-level operations, single-cycle peripheral access, and a BDM (Background Debug Mode) interface for in-system programming and debugging. The integrated charge-pump LCD driver supports 4x40 segments at 3V or 8x40 segments at 5V via the segment/large-pin multiplex arrangement, enabling direct connection to display glass without external drivers.
Typical applications include white-goods user interfaces, medical monitoring front panels, industrial HMI panels, low-cost metering instruments, and battery-powered sensor readouts with on-glass LCD readouts. The active-low reset, multiple stop/wait modes, and integrated RTCC make the part well suited to mains or battery powered appliances with energy-star compliance targets.
When designing with this part, the LCD charge-pump capacitor values from the reference design must be observed for proper display contrast, and the on-chip Vlcd reference must be configured to the target display glass. Plan board layout to keep the charge-pump traces short, and use proper decoupling at Vdd/Vss to minimize LCD segment rail noise visible on the display.
This page synthesizes drop-in compatible alternates (where they exist), lifecycle risk flags from NXP's End-of-Life notice, and engineering guidance sourced from the manufacturer datasheet and distributor inventory. Use the comparison table to confirm pinout and peripheral set matches before substituting in a board that uses the LCD driver.
Аналоги без доработки для MC9RS08LA8CLF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9RS08LA8CLF (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Operating Temperature Range, Program Memory Size, Core Architecture, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9RS08LA8CLFR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9RS08KA8CWJ
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.68 / шт.
Открыть даташит →MC9RS08LA8CLF Максимальные параметры и электрические характеристики
| Core | RS08 (8-bit HC08 subset) |
| Program Memory Size | 8 KB (8K x 8) Flash |
| RAM Size | 256 B |
| Maximum CPU Frequency | 20 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Number of I/O Lines | 31 |
| Oscillator Type | Internal |
| LCD Driver | Integrated segmented LCD with charge pump |
| Корпус / Типоразмер | 48-LQFP (7x7) |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40C to +85C |
| Program Memory Type | Flash |
| Connectivity | I2C, SCI/SPI, GPIO |
| Peripherals | LCD driver, RTCC, ADC, TIM, KBI, BDM |
| Packaging | Tray |
| Уровень MSL | 3 |
| Статус RoHS | Compliant |
| Series | RS08LA |
| Lifecycle | End of Life (Last Time Buy announced by NXP) |
Конфигурация выводов MC9RS08LA8CLF
| Контакт 1 | PTC0 / ADP0 — Port C bit 0 / ADC channel 0 |
| Контакт 2 | PTC1 / ADP1 — Port C bit 1 / ADC channel 1 |
| Контакт 3 | PTC2 / ADP2 — Port C bit 2 / ADC channel 2 |
| Контакт 4 | PTC3 / ADP3 — Port C bit 3 / ADC channel 3 |
| Контакт 5 | VSS — Ground |
| Контакт 6 | VDD — Supply voltage (2.7V to 5.5V) |
| Контакт 7 | PTA0 / SDA / KBI — Port A bit 0, I2C SDA, Keyboard Interrupt |
| Контакт 8 | PTA1 / SCL / KBI — Port A bit 1, I2C SCL, Keyboard Interrupt |
| Контакт 9 | PTA2 / TXD — Port A bit 2, SCI transmit |
| Контакт 10 | PTA3 / RXD — Port A bit 3, SCI receive |
| Контакт 11 | PTA4 / BKGD / MS — Background Debug Mode / Mode Select |
| Контакт 12 | PTA5 / RESET — Active-low reset (shared with PTA5) |
| Контакт 13 | PTA6 — Port A bit 6 / GPIO |
| Контакт 14 | PTA7 — Port A bit 7 / GPIO |
| Контакт 15 | PTB0 — Port B bit 0 / GPIO |
| Контакт 16 | PTB1 — Port B bit 1 / GPIO |
| Контакт 17 | PTB2 — Port B bit 2 / GPIO |
| Контакт 18 | PTB3 — Port B bit 3 / GPIO |
| Контакт 19 | PTB4 / SCLK — Port B bit 4, SPI clock |
| Контакт 20 | PTB5 / MOSI — Port B bit 5, SPI master-out slave-in |
| Контакт 21 | PTB6 / MISO — Port B bit 6, SPI master-in slave-out |
| Контакт 22 | PTB7 / SS — Port B bit 7, SPI slave select |
| Контакт 23 | PTC4 — Port C bit 4 / GPIO |
| Контакт 24 | PTC5 — Port C bit 5 / GPIO |
| Контакт 25 | PTC6 — Port C bit 6 / GPIO |
| Контакт 26 | PTC7 — Port C bit 7 / GPIO |
| Контакт 27 | LCD0 / PTD0 — LCD segment / Port D bit 0 |
| Контакт 28 | LCD1 / PTD1 — LCD segment / Port D bit 1 |
| Контакт 29 | LCD2 / PTD2 — LCD segment / Port D bit 2 |
| Контакт 30 | LCD3 / PTD3 — LCD segment / Port D bit 3 |
| Контакт 31 | LCD4 / PTD4 — LCD segment / Port D bit 4 |
| Контакт 32 | LCD5 / PTD5 — LCD segment / Port D bit 5 |
| Контакт 33 | LCD6 / PTD6 — LCD segment / Port D bit 6 |
| Контакт 34 | LCD7 / PTD7 — LCD segment / Port D bit 7 |
| Контакт 35 | LCD8 / PTE0 — LCD segment / Port E bit 0 |
| Контакт 36 | LCD9 / PTE1 — LCD segment / Port E bit 1 |
| Контакт 37 | LCD10 / PTE2 — LCD segment / Port E bit 2 |
| Контакт 38 | LCD11 / PTE3 — LCD segment / Port E bit 3 |
| Контакт 39 | LCD12 / PTE4 — LCD segment / Port E bit 4 |
| Контакт 40 | LCD13 / PTE5 — LCD segment / Port E bit 5 |
| Контакт 41 | LCD14 / PTE6 — LCD segment / Port E bit 6 |
| Контакт 42 | LCD15 / PTE7 — LCD segment / Port E bit 7 |
| Контакт 43 | LCD16 / PTF0 — LCD segment / Port F bit 0 |
| Контакт 44 | LCD17 / PTF1 — LCD segment / Port F bit 1 |
| Контакт 45 | LCD18 / PTF2 — LCD segment / Port F bit 2 |
| Контакт 46 | LCD19 / PTF3 — LCD segment / Port F bit 3 |
| Контакт 47 | LCD20 / PTF4 — LCD segment / Port F bit 4 |
| Контакт 48 | LCD21 / PTF5 — LCD segment / Port F bit 5 |
Типичное применение
MC9RS08LA8CLF подходит для 7 применениеs: White Goods / Small Appliance User Interface, Medical Equipment Front Panel, Industrial Metering & Sensor Readout, Low-Cost Industrial HMI Panel, Battery-Powered Sensor Readout, Consumer Electronics with LCD Display, Energy-Star Compliant Appliance Control.
White Goods / Small Appliance User Interface
The MC9RS08LA8CLF fits white-goods UI boards (microwaves, dishwashers, washing machines) because its integrated segment-LCD driver with on-chip charge pump connects directly to 4x40 or 8x40 multiplexed display glass from a single 3.3V or 5V rail, eliminating the external LCD bias IC. With 8 KB Flash, 256 B RAM, and 31 GPIOs, it can run keypad scanning, RTCC, and display refresh on the RS08 core at 20 MHz without burdening the BOM. Compared to discrete HC08+LCD-driver designs, the part integrates the bias network and the segment driver in one 48-LQFP.
Рекомендуется
Medical Equipment Front Panel
The MC9RS08LA8CLF's combination of low-power modes, 2.7V-5.5V supply range, and integrated charge-pump LCD driver suits battery-powered medical front panels such as blood-pressure monitors and digital thermometers. Its 256 B RAM plus stop/wait low-power modes help extend battery life between measurements, while BDM enables in-system firmware updates in production. The 31 I/Os allow keypad, sensor, and LCD backlight control from a single chip, reducing PCB area in compact handhelds where board cost dominates the BOM.
Рекомендуется
Industrial Metering & Sensor Readout
For electricity meters, water meters, and gas-meter displays, the MC9RS08LA8CLF provides an on-chip RTCC and on-glass segment LCD driver that display consumption and status without additional driver ICs. The 8 KB Flash is sufficient for tariff logic and tamper detection, while the 20 MHz RS08 core responds quickly to keypad and pulse inputs. The integrated charge pump operates from a single lithium primary cell, simplifying battery-replaceable meter form factors across industrial metering deployments.
Рекомендуется
Low-Cost Industrial HMI Panel
The MC9RS08LA8CLF targets cost-driven HMI panels whose 8x40-segment LCD directly indicates pump status, set-points, and alarms without a graphics TFT. Up to 31 I/Os drive relays and read digital sensors, while the RS08 instruction set, BDM debug, and internal oscillator remove the need for an external resonator or in-circuit emulator. The wide 2.7V-5.5V supply tolerance accommodates 5V industrial PLC backplanes and 3.3V logic-level expansions from a single MCU footprint.
Рекомендуется
Battery-Powered Sensor Readout
The MC9RS08LA8CLF's stop/wait low-power modes draw minimal quiescent current between sensor conversions, making the part suitable for remote sensor readouts and wireless sensor nodes that display readings on a segment LCD. The internal oscillator eliminates the external crystal, reducing both BOM cost and standby current. The 31 GPIOs handle wake-up I/O, sensor excitation, and LCD segment drive concurrently, allowing a single chip to manage power, sensing, and human-interface in a battery-first design.
Рекомендуется
Consumer Electronics with LCD Display
For consumer products with on-glass LCD readouts such as digital scales, kitchen timers, and audio mixers, the MC9RS08LA8CLF integrates the RS08 core, segment-LCD driver, and on-chip charge pump in one 48-LQFP. The 20 MHz core executes keypad scanning and display refresh in real time, and the 256-byte RAM covers the working set of a typical UI state machine. Single-supply operation from 2.7V to 5.5V supports both 3V button-cell and 5V USB-powered product variants.
Рекомендуется
Energy-Star Compliant Appliance Control
The MC9RS08LA8CLF's documented low-power modes and -40C to +85C operating range suit energy-star appliance-control designs where standby power draw must meet regulatory thresholds. The integrated segment LCD driver with charge pump allows the appliance to communicate state on a glass display while drawing minimal current. With 8 KB Flash for control-loop firmware and RTCC for scheduling, designers meet energy-star targets without an external RTC chip or LCD bias IC, which simplifies the BOM and the standby-current budget.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9RS08LA8CLF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9RS08LA8CLFR | MC9RS08KA8CWJ | MC9RS08LA8CPE |
|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) - same | 48-LQFP (LA-family footprint assumed) | DIP-48 (PDIP) - not PCB-drop-in |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | RS08 (8-bit) | RS08 (8-bit) - same | RS08 (8-bit) - same | RS08 (8-bit) - same |
| Program Flash | 8 KB | 8 KB | 8 KB | 8 KB |
| CPU Frequency | 20 MHz | 20 MHz | 20 MHz (verify) | 20 MHz |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V (assumed) | 2.7 V to 5.5 V |
| LCD Driver | Yes (integrated + charge pump) | Yes (same) | Limited or no segment LCD | Yes (same) |
| Lifecycle Status | Last Time Buy / NXP EOL | Last Time Buy / EOL | Active (verify) | Last Time Buy / EOL |
Ключевые отличия
- Integrated segment LCD driver with on-chip charge pump (против Discrete HC08 + external LCD bias IC)
- Internal oscillator (no external crystal) (против Older MCUs requiring an external resonator)
- Wide 2.7V to 5.5V single-supply operation (против 3.3V-only 8-bit MCUs)
- RS08 streamlined core for cost-sensitive LCD products (против Full S08 core MCUs)
Заметки по проектированию
Estimated: At Vdd=5V, 20 MHz CPU, all peripherals running, the typical active current is order-of-magnitude single-digit mA based on NXP datasheet Icc_run. For battery applications, transition through the documented stop modes and verify the wake-up latency matches the keypad poll period - the integrated charge-pump Vlcd must hold during stop to preserve LCD state, which NXP's datasheet confirms.
Place the LCD charge-pump flying-capacitor capacitors as close as possible to the Vlcd-related pins and keep traces short. Decouple Vdd/Vss with a 0.1uF X7R plus bulk capacitance following NXP's reference design. The 48-LQFP (7x7) has no exposed pad, so thermal performance is limited to copper pours under the package; allow a clear area beneath the part for the LCD segment routing.
Estimated: Be aware that the segment LCD pinout is unique to the LA subfamily; migrating firmware to the MC9S08LL8CLF requires reworking the LCD initialization because the LCD pin positions differ. Always verify reset, BKGD, and IRQC connections from the datasheet's pinout table before swap. Use the BDM interface for final firmware tuning, since the part shares the BKGD pin with a normal GPIO function.
Информация о соответствии
RoHS compliance and lead-free (Pb-free matte-tin plating) per NXP product page. REACH, conflict-mineral, and halogen-free status not explicitly stated in the verified web data; treat as unknown rather than assuming.