MC9S08PB8VTG - 20MHz 8-Bit Flash MCU | NXP
Артикул: MC9S08PB8VTG ✓ АктивенMC9S08PB8VTG Обзор
An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, and peripherals on one integrated circuit. MCUs are used to implement control logic in products such as industrial controls, household appliances, sensor nodes, and automotive accessories. Within the device hierarchy, the MC9S08PB8VTG belongs to the S08P family of 8-bit microcontrollers and shares the S08 core, reusable peripheral IP, and software ecosystem described by NXP for simplified migration within the family.
The most prominent device characteristics are its 20 MHz maximum clock frequency, 8 KB of Flash program memory, and 16-pin TSSOP construction. Its 12-bit ADC provides more resolution than an 8-bit converter, making the MCU useful for monitoring analog sensor signals with comparatively fine quantization. The integrated comparator and amplifier support thresholding, signal conditioning, and local analog measurements without requiring separate components in every design.
NXP describes the S08PB family as a scalable, pin-compatible MCU family that reuses the existing S08 core, IP, and tools. That compatibility can simplify firmware and hardware migration when a design moves between qualified S08P devices with similar package options. The device also emphasizes EFT and ESD performance, useful in applications where electrical transients and electrostatic discharge are relevant design concerns.
Typical applications include industrial sensor controllers, building and access-control modules, small appliance controls, metering systems, battery-operated sensor nodes, and compact embedded products. A design can use the ADC for analog inputs, the comparator for threshold decisions, the amplifier for conditioning weak signals, and the timers for periodic measurement or actuator timing. The 5 V operating target also suits systems that operate from regulated 5 V rails.
PCB planning should prioritize clean analog routing around the ADC, comparator, and amplifier pins, while keeping switching supplies and high-current outputs away from sensitive measurement traces. Follow the NXP datasheet pin-description table for the exact 16-TSSOP assignments, exposed features, decoupling requirements, and recommended application circuit before laying out the board.
This product page combines the exact catalog characteristics of the MC9S08PB8VTG with application guidance, migration considerations, design cautions, and structured comparisons. It is intended to help engineers evaluate whether the MCU's Flash capacity, analog integration, clock speed, and package match the requirements of a new embedded design.
Аналоги без доработки для MC9S08PB8VTG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08PB8VTG (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Package, Serial Interface.
Для этого товара нет аналогов без доработки.
Запросить аналогиMC9S08PB8VTG Максимальные параметры и электрические характеристики
| Manufacturer | NXP Semiconductors |
| Product Type | 8-bit microcontroller |
| Product Family | S08P |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| ADC Resolution | 12 bit |
| Operating Voltage | 5 V |
| ADC | Integrated 12-bit analog-to-digital converter |
| Analog Comparator | Integrated |
| Operational Amplifier | Integrated |
| Serial Interface | I2C |
| Timers | Flexible timer peripherals |
| EFT/ESD Performance | Supported by the S08P family design |
| Корпус | 16-TSSOP |
| Тип монтажа | Surface Mount |
| Число выводов | 16 pins |
| Статус жизненного цикла | Active |
Руководство по цоколевке MC9S08PB8VTG в корпусе 16-tssop
Цоколевка для MC9S08PB8VTG (корпус 16-tssop). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S08PB8VTG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S08PB8VTG подходит для 6 применениеs: Industrial Sensor Controller, Building Access and Security Module, Small Appliance Controller, Energy Metering and Monitoring, Battery-Powered Sensor Node, Communications and Protocol Interface Module.
Industrial Sensor Controller
The MC9S08PB8VTG fits compact industrial sensor modules that must convert analog inputs and execute local control logic. Its integrated 12-bit ADC provides 4096 quantization levels across the full input range, while the comparator can handle simple threshold decisions independently of the main software path. The 20 MHz S08 core supports responsive filtering and communication tasks, and I2C provides a compact link to sensors, transceivers, or expansion devices. Using the 16-TSSOP package helps reduce board area in densely populated industrial equipment. Design the analog section around stable reference and supply arrangements, high-impedance sensor paths, and separate analog and digital return-current planning to preserve measurement quality.
Рекомендуется
Building Access and Security Module
The MC9S08PB8VTG is suitable for compact access-control peripherals that combine digital inputs, timing, serial communication, and local analog supervision. The 20 MHz processor can manage keypad scanning, relay timing, status indication, and communication tasks, while the 12-bit ADC can monitor a supply or analog supervisory signal. I2C is useful for connecting a secure controller, sensor, or LED driver, and the 16-TSSOP package reduces the footprint in door hardware. Keep the analog input path away from relay contacts and high-edge-rate digital nodes. Confirm transient immunity, ESD behavior, operating-temperature limits, and production programming requirements from the manufacturer documentation before deployment in security-related equipment.
Рекомендуется
Small Appliance Controller
The MC9S08PB8VTG can serve as the primary controller in a small appliance where a 5 V control architecture, embedded program memory, and analog monitoring simplify the design. Its 8 KB Flash supports a compact control program, the 20 MHz core provides useful timing margin, and the integrated ADC can monitor temperature, level, or supply voltage. The comparator supports fast threshold functions, while the amplifier can condition weak analog signals without adding a separate discrete stage. In motor- or heater-adjacent equipment, maintain separation between analog inputs and switching nodes, use appropriate filtering, and verify the regulator's thermal performance. The 16-TSSOP footprint is useful when the controller must fit beside relays, drivers, and communication modules.
Рекомендуется
Energy Metering and Monitoring
The MC9S08PB8VTG fits metering modules that must sample analog signals and maintain accurate timing across a 5 V system. Its 12-bit ADC supports higher-resolution acquisition than an 8-bit converter, while the flexible timers can establish periodic measurement and communication intervals. The integrated amplifier may reduce conditioning requirements for suitably designed inputs, and the comparator can provide threshold or zero-crossing assistance. The S08P family's EFT and ESD emphasis is relevant where the meter is electrically connected to long field wiring. The 16-TSSOP package keeps the controller compact beside an interface IC and isolated communications circuitry. Apply the datasheet's ADC acquisition, reference, grounding, and external-component recommendations to maintain repeatable measurements.
Рекомендуется
Battery-Powered Sensor Node
The MC9S08PB8VTG can support compact, low-duty-cycle sensor nodes that periodically wake, acquire a measurement, evaluate a threshold, and communicate over I2C. Its 8 KB Flash is sufficient for many focused control tasks, and the 20 MHz S08 core allows filtering and protocol handling without moving to a larger processor. The comparator can support low-latency threshold decisions, while the 12-bit ADC handles richer sensor readings. Low-power suitability must be evaluated from the device's sleep and operating-current specifications in the NXP datasheet because duty-cycle efficiency depends on the selected mode and peripherals. Minimize leakage around analog inputs and follow the package-specific decoupling guidance to improve repeatability and reduce board-level energy use.
Рекомендуется
Communications and Protocol Interface Module
The MC9S08PB8VTG is appropriate for small protocol adapters and embedded interface modules that need local control, I2C connectivity, timing, and limited analog supervision in a compact package. The 20 MHz core can process protocol frames and service peripheral interrupts, while the flexible timers support periodic polling or timeout management. Its 8 KB Flash favors focused firmware rather than large application storage, making it well suited to bridge or supervisory functions. I2C companion devices can expand digital I/O, while the comparator and ADC can monitor supply or line conditions. Pin compatibility across the S08P family can reduce redesign effort when moving between qualified configurations, but each alternative must be checked for memory, peripheral, and timing differences before production use.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08PB8VTG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Manufacturer | NXP Semiconductors |
| Package | 16-TSSOP |
| CPU Architecture | 8-bit S08 |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Operating Voltage | 5 V |
| ADC Resolution | 12 bit |
| Integrated Analog Resources | ADC, analog comparator, and amplifier |
| Serial Interface | I2C |
| Lifecycle Status | Active |
Ключевые отличия
- Integrated 12-bit analog conversion in a compact 16-TSSOP MCU (против MC9S08PA4VTG)
- Mixed-signal resources reduce external component count (против MC9S08PA4VTG)
- 20 MHz S08P processing headroom in a small package (против MC9S08PA4VTG)
Заметки по проектированию
Separate analog and digital return paths as far as the 16-TSSOP layout permits. Place the MCU's required input, output, and reference decoupling capacitors directly beside their pins, with the shortest possible ground return to the associated supply plane. Route ADC inputs away from timer outputs, switching-regulator nodes, relay contacts, and other high-current edges. A quiet analog reference and a ground topology selected from the manufacturer's application guidance are especially important because the integrated 12-bit ADC shares a compact digital package with control logic.
Treat analog inputs as high-impedance nodes until the NXP datasheet establishes their allowed source impedance and acquisition-time requirements. Add filtering only where its time constant does not prevent the sampled signal from settling within the selected ADC conversion time. The integrated amplifier can simplify some sensor paths, but its input range, offset, bandwidth, stability, and output-drive limits must be checked against the actual source. The comparator should likewise be configured with deliberate hysteresis when noisy or slowly changing signals are compared against a threshold.
Do not treat membership in the S08P family as proof that every device is a drop-in replacement. Pin compatibility still depends on the exact package, power pins, exposed features, oscillator arrangement, analog channels, Flash capacity, timer mapping, and peripheral functions. Before using another S08P MPN, compare its complete pin-description table and current datasheet with the MC9S08PB8VTG design. After conversion, check startup, clock initialization, ADC calibration, interrupt priorities, watchdog behavior, and programming configuration rather than relying only on software compatibility.
Design the 5 V supply path for both average demand and transient response from enabled peripherals. The 20 MHz operating rate does not imply continuous full-rate operation, so calculate duty cycle before estimating regulator loading. Check the MCU's specified supply range and current consumption in the NXP documentation, then size local bulk and high-frequency decoupling according to the reference circuit. If an ADC result must remain stable during activity on the same board, use separate filtering or supply routing so digital load changes do not dominate the reference and analog rails.
Информация о соответствии
The product catalog identifies the MC9S08PB8VTG as active and mentions EFT and ESD performance for the S08P family. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the ordered part.