NXP Semiconductors

MC9S08RC32CFG - 8-Bit, 8MHz, 32KB Flash MCU | NXP

Артикул: MC9S08RC32CFG ✓ Активен
1.8 V to 3.6 V Vdss 44-pin LQFP Package 8 MHz Speed 32 KB Memory
MOQ: 1 |

MC9S08RC32CFG Обзор

The NXP Semiconductors MC9S08RC32CFG is an 8-bit S08 microcontroller with an 8 MHz operating frequency, 32 KB of embedded flash memory, a 1.8 V to 3.6 V supply range, and a 44-pin LQFP package measuring 10 mm by 10 mm. It is designed for compact embedded-control applications that require deterministic digital control, serial communication, timing, and analog input functions without adopting a higher-cost 32-bit architecture.

A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, peripheral interfaces, and I/O ports on one semiconductor device. The S08 family belongs to the broader microcontroller hierarchy, which sits above simple logic controllers and below application-specific processors. The MC9S08RC32CFG combines an 8-bit CPU, 32 KB of flash program storage, and integrated peripherals in a surface-mount LQFP package suitable for industrial control boards, sensor nodes, and compact embedded products.

The principal device characteristics are an 8 MHz clock, 32 KB of flash memory, and a 1.8 V to 3.6 V operating-supply range. Its 44-pin LQFP package provides 40 external leads in addition to four exposed thermal and ground connections, as identified in the manufacturer package description. The flash architecture supports firmware storage in a single package and avoids the need for a separate program-memory device when designing a standalone controller.

The S08 architecture is intended for cost-sensitive embedded systems where an 8-bit instruction set, integrated flash, and a broad selection of serial and timing peripherals provide an appropriate balance of capability, power efficiency, and implementation complexity. The 1.8 V to 3.6 V range permits use in systems powered from regulated low-voltage rails, while the 10 mm by 10 mm LQFP format supports conventional reflow assembly and copper-based thermal dissipation on multilayer boards.

Typical applications include small motor-control modules, low-speed sensor interfaces, building equipment controls, appliance controllers, communication adapters, and compact instrumentation. In each case, the device can execute embedded firmware and coordinate inputs and outputs without requiring a separate processor. Peripheral assignments, electrical limits, clock behavior, and programming requirements should be confirmed against the pin-description and electrical-characteristics tables in the manufacturer datasheet.

PCB design should preserve the package-specific land pattern, exposed-pad connections, decoupling arrangement, and programming access. The MCU operates from a 1.8 V to 3.6 V supply, so power sequencing, signal-level compatibility, and grounding require verification across the complete system. Because its architecture is fixed at 8 bits, software-intensive networking, high-resolution graphics, and computationally intensive control are better assigned to a more capable processor family.

This product record combines the verified core specifications, package information, lifecycle context, and sourcing resources for the MC9S08RC32CFG. It also provides application guidance and an engineering comparison framework that help developers evaluate this S08 microcontroller before schematic capture, PCB layout, firmware development, and production procurement.

Аналоги без доработки для MC9S08RC32CFG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MC9S08RC32CFGE

✅ Прямая замена
📦 44-LQFP (10x10 mm)
Same documented 8 MHz clock, 32 KB flash, and 44-LQFP package; the E suffix differs from the target ordering code and may change grade or packing attributes

📋 Справочный аналог (нет в каталоге)

MC9S08RC32CFG Максимальные параметры и электрические характеристики

Product Type 8-bit S08 microcontroller
Maximum CPU Frequency 8 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
Рабочее напряжение питания 1.8 V to 3.6 V
Корпус 44-pin LQFP
Package Dimensions 10 mm x 10 mm
Тип монтажа Surface mount
Total Package Leads 44 leads
External Leads 40 leads
Exposed Thermal and Ground Connections 4 connections
CPU Architecture 8-bit
Статус RoHS Compliant

Руководство по цоколевке MC9S08RC32CFG в корпусе 44 leads

Цоколевка для MC9S08RC32CFG (корпус 44 leads). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 44 leads для MC9S08RC32CFG

Нет подробных данных о распиновке для MC9S08RC32CFG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MC9S08RC32CFG подходит для 6 применениеs: Industrial Sensor and Condition Monitoring, Appliance and Equipment Control, Communication Interface Module, Compact Motor and Actuator Control, Building and Environmental Controls, Compact Instrumentation and Test Control.

🏭

Industrial Sensor and Condition Monitoring

The MC9S08RC32CFG fits compact monitoring modules that periodically read sensors, apply thresholds, filter data, and report status through a serial interface. Its 8-bit S08 processor and 8 MHz clock are appropriate for deterministic supervisory tasks, while the 32 KB of flash memory provides room for firmware without a separate program-memory device. The 1.8 V to 3.6 V operating range can support low-voltage designs built around regulated sensors and radio or communications modules. For a new layout, keep the MCU supply decoupling close to its power pins and route sensitive sensor returns away from switching nodes. Firmware should use timer-based scheduling rather than relying on busy loops, which improves responsiveness and reduces unnecessary activity.

🔧

Appliance and Equipment Control

The MC9S08RC32CFG can serve as the central controller in an appliance or compact equipment module that coordinates inputs, drives indicators, manages relays, and enforces operating sequences. The 8 MHz S08 core provides straightforward execution for control logic, and 32 KB of flash is practical for embedded application firmware. Its 44-pin LQFP package offers more external connections than a small lead-frame microcontroller, allowing multiple digital I/O functions to be consolidated on one board. Design the power paths so inductive loads remain separated from sensitive signal traces, include appropriate protection for exposed connectors, and confirm that the MCU ground references return cleanly to the supply bypass network.

🌐

Communication Interface Module

The MC9S08RC32CFG is appropriate for a small protocol bridge or command interface that receives data, validates messages, and forwards status to another system. Its 32 KB of embedded flash can hold protocol tables and application code, while the 8 MHz operating rate supports event-driven serial handling in modest systems. The 1.8 V to 3.6 V range is useful for integration with modern low-voltage interface electronics. Use interrupt-driven receive and transmit routines, keep baud-rate timing calculations within the device’s documented peripheral capabilities, and provide separate filtering or protection for externally accessible communication lines. This configuration avoids unnecessary processing overhead while preserving a straightforward firmware update path.

⚡

Compact Motor and Actuator Control

The MC9S08RC32CFG can control simple actuators, position mechanisms, or low-power motor stages when the control algorithm does not require complex math or a high-performance real-time processor. The 8-bit architecture is well matched to digital sequencing, limit handling, timing, and fault-state reporting, while 32 KB of flash accommodates a compact motion-control application. Keep high-current switching stages physically separated from the MCU and use protected, properly grounded driver circuits. Firmware should include startup delays, maximum-runtime limits, and safe-state behavior for missing sensor feedback. The operating supply must remain within 1.8 V to 3.6 V even during transient events.

🏠

Building and Environmental Controls

The MC9S08RC32CFG is suitable for building-control endpoints that combine digital inputs, environmental sensing, local override controls, and serial reporting. The device’s 8 MHz S08 core can execute deterministic control tasks, and the 32 KB flash area provides a practical firmware budget for product-specific logic. Its low-voltage supply range supports integration into powered sensor and actuator nodes operating from regulated rails. Design the printed circuit board with ESD protection at external connectors, maintain consistent grounding between sensor returns and the MCU, and isolate long wiring from sensitive control traces. A watchdog strategy and safe restart behavior are particularly valuable in equipment that may be installed in electrically noisy locations.

🖥️

Compact Instrumentation and Test Control

The MC9S08RC32CFG can act as a low-cost sequencer or measurement-control component in compact instrumentation. Its 8-bit processing capability is suitable for control sequencing, threshold evaluation, data formatting, and front-panel interaction, while the 32 KB flash area supports self-contained firmware. The 44-pin LQFP provides a practical number of connections for digital signals and communication functions in a 10 mm by 10 mm footprint. For analog measurement accuracy, use the MCU only for control and conditioning unless the device’s specified ADC performance meets the measurement requirement. Place analog and digital return currents separately, use stable reference components, and verify calibration behavior across the intended 1.8 V to 3.6 V supply range.

What are the key specifications of MC9S08RC32CFG that engineers should know?
The MC9S08RC32CFG is an 8-bit S08 microcontroller operating at up to 8 MHz with 32 KB of flash memory in a 44-pin LQFP package. According to the manufacturer product description, its operating supply range is 1.8 V to 3.6 V and the package measures 10 mm by 10 mm. The device also includes 40 external leads and four exposed thermal and ground connections.
What is the operating voltage of MC9S08RC32CFG?
The MC9S08RC32CFG operates from 1.8 V to 3.6 V. According to the manufacturer product information, this low-voltage range supports regulated supply rails in compact embedded systems. Engineers should verify the detailed electrical-characteristics table for voltage-dependent limits, power consumption, and operating conditions before finalizing the power-supply design.
How much flash memory does MC9S08RC32CFG have?
The MC9S08RC32CFG contains 32 KB of flash memory organized as 32K by 8 bits. According to the manufacturer product description, this embedded program memory provides sufficient capacity for embedded control firmware without a separate program-memory device. Actual application fit depends on the compiled code size, bootloader requirements, and any data-retention features implemented by the firmware.
What package does MC9S08RC32CFG use?
The MC9S08RC32CFG uses a 44-pin LQFP package measuring 10 mm by 10 mm. According to the manufacturer package description, the package has 40 external leads plus four exposed thermal and ground connections. Its land pattern and exposed-pad connections must match the manufacturer footprint and PCB-layout guidance.
Where can I find the MC9S08RC32CFG pinout and datasheet?
The MC9S08RC32CFG pinout and electrical information are contained in the manufacturer documentation for the MC9S08RC32 family. Use the pin-description table and package drawing for the exact 44-lead LQFP assembly. A family datasheet is also indexed for MC9S08RC32FG, but the exact suffix must be checked because orderable variants can differ in temperature grade, lead condition, and packing code.
Where can I buy MC9S08RC32CFG online?
The MC9S08RC32CFG can be requested through the Request a Quote form on this page. The form is the appropriate route for obtaining a current quotation, minimum order quantity, availability, and delivery scheduling for the exact 44-pin LQFP ordering code. Engineers should quote the complete MPN, MC9S08RC32CFG, to avoid confusion with MC9S08RC32CFGE and other family variants.
What is the price of MC9S08RC32CFG?
Current MC9S08RC32CFG pricing and availability should be obtained through the Request a Quote form on this page. The form allows buyers to confirm the exact suffix, order quantity, and current commercial terms without relying on a static quotation. Include the required packaging and production quantity so the supplier can confirm the appropriate manufacturing and delivery schedule.
What is the lead time for MC9S08RC32CFG?
The current lead time for MC9S08RC32CFG should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, assembly packaging, component availability, and production scheduling. Providing the forecast annual volume and required delivery date gives the supplier the information needed to offer a more accurate schedule.
Is MC9S08RC32CFG in stock?
MC9S08RC32CFG availability should be checked through the Request a Quote form on this page. Submit the exact MPN, desired package, and required quantity to obtain the current stock and delivery position. For production planning, request the confirmed lead time as well as any lot or traceability requirements for the assembled application.
MC9S08RC32CFG vs MC9S08RC32CFGE — which is better for an existing PCB?
The MC9S08RC32CFGE is the closest documented alternative because both devices are identified as 8-bit S08 microcontrollers with an 8 MHz clock, 32 KB of flash memory, and a 44-pin LQFP package. The suffix differences should still be reviewed before substitution because they may encode temperature grade, lead condition, or packing. Confirm the complete pin and electrical comparison in the manufacturer documentation.
When should I choose MC9S08RC32CFG over MC9S08RC32CFGE?
Choose the MC9S08RC32CFG when the exact orderable code matches the product’s mechanical, temperature, and sourcing requirements. Choose MC9S08RC32CFGE only after confirming that its documented suffix attributes and electrical ratings satisfy the design. Both parts are associated with the same 8 MHz, 32 KB, 8-bit S08 configuration and 44-pin LQFP mechanical format.
Is MC9S08RC32CFG suitable for a low-voltage embedded control system?
The MC9S08RC32CFG is suitable for many low-voltage embedded-control systems because it operates from 1.8 V to 3.6 V and provides 32 KB of embedded flash memory. Its 8 MHz 8-bit architecture is appropriate for supervisory logic, sensor conditioning, timing, and communication coordination rather than compute-intensive workloads. The complete peripheral, interrupt, and timing requirements should be checked against the family documentation.
What can replace MC9S08RC32CFG without changing the PCB?
MC9S08RC32CFGE is the documented drop-in candidate for MC9S08RC32CFG because the product listings identify the same 8-bit S08 core, 8 MHz frequency, 32 KB flash configuration, and 44-pin LQFP package. Before replacement, verify temperature grade, lead finish, pin functions, electrical limits, and firmware compatibility. The documented suffix differences must not be assumed to be functionally irrelevant.
Is MC9S08RC32CFG the same as MC9S08RC32CFGE?
The MC9S08RC32CFG and MC9S08RC32CFGE share the documented 8-bit S08 architecture, 8 MHz maximum frequency, 32 KB flash memory, and 44-pin LQFP package. They are not identical orderable codes, however, and the suffix may change temperature grade, lead condition, or packing. Use the exact manufacturer ordering information to determine whether the populated part meets all production requirements.
What is the best NXP equivalent for MC9S08RC32CFG?
MC9S08RC32CFGE is the closest identified NXP equivalent because it retains the same documented 8-bit S08 architecture, 8 MHz operating frequency, 32 KB flash memory, and 44-pin LQFP package. Its different suffix must be reviewed for temperature, lead-finish, and packing differences. This makes it a candidate for a footprint-compatible redesign rather than an unconditional substitute.

Справочные инженерные данные для MC9S08RC32CFG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MC9S08RC32CFG when the production BOM specifically requires that ordering code and the board requires an 8 MHz, 8-bit S08 controller with 32 KB of embedded flash. MC9S08RC32CFGE is the documented footprint-compatible candidate when its temperature grade, lead condition, packing, and electrical attributes satisfy the design. Neither part is appropriate for workloads requiring a 32-bit processor, extensive RAM, advanced graphics, or compute-intensive signal processing. For new designs, confirm the exact peripheral mix, memory map, clock configuration, ADC performance, programming method, and package details in the manufacturer documentation before releasing the schematic. For an existing PCB, treat the alternative as a qualified sourcing option only after comparing the complete ordering information rather than relying only on the shared package and core specifications.

Сравнение с аналогами

Параметр Этот товар MC9S08RC32CFGE
Brand NXP Semiconductors NXP Semiconductors
Package 44-LQFP (10x10 mm) 44-LQFP (10x10 mm)
Product Type 8-bit S08 microcontroller 8-bit S08 microcontroller
Maximum CPU Frequency 8 MHz 8 MHz
Flash Memory 32 KB 32 KB
Flash Organization 32K x 8 bits 32K x 8 bits
CPU Architecture 8-bit 8-bit

Ключевые отличия

  • Identical documented core configuration (против MC9S08RC32CFGE)
  • Compatible 44-pin LQFP mechanical format (против MC9S08RC32CFGE)
  • Low-voltage embedded-control positioning (против MC9S08RC32CFGE)

Заметки по проектированию

Follow the manufacturer LQFP land pattern exactly, including the four exposed thermal and ground connections. Place the device-side supply bypass capacitor close to the corresponding power and ground pins, keep the exposed-pad path free of unnecessary thermal barriers, and route high-current actuator returns away from MCU traces. The package is only 10 mm by 10 mm, so courtyard and solder-mask clearance should be checked before finalizing the land pattern.

Design the supply for the documented 1.8 V to 3.6 V operating range and verify ripple and transient performance at every load state. If the board includes relays, motors, LEDs, or communication modules, separate their supply paths or filtering from the MCU rail as appropriate. Confirm that the regulator remains stable at the minimum operating voltage and does not expose the MCU to startup overshoot.

Do not treat MC9S08RC32CFG as an exact synonym for every MC9S08RC32 suffix. Ordering-code differences can affect temperature grade, lead condition, packing, and possibly device qualification. Before substituting a similarly named part, compare the manufacturer ordering table, electrical limits, pin assignments, and exposed-pad requirements. This prevents a footprint-compatible choice from creating a production or temperature-range mismatch.

Separate analog, communication, and switching domains on the PCB. Return serial and sensor signals over continuous ground paths, keep clock and programming interfaces away from noisy power stages, and use test points for supply, reset, and key serial signals. Although the package has 44 physical connections, only 40 are external leads, so verify every exposed connection when assigning signals.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS status is identified for the exact MC9S08RC32CFG listing. The other environmental, materials, and automotive qualification attributes are unknown and require confirmation from the manufacturer before qualification.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MC9S08RC32CFG datasheet MC9S08RC32CFG datasheet pdf MC9S08RC32CFG pinout MC9S08RC32CFG specifications MC9S08RC32CFG 8MHz 32KB flash MC9S08RC32CFG 44-LQFP NXP MC9S08RC32CFG MC9S08RC32CFG equivalent MC9S08RC32CFG replacement MC9S08RC32CFG vs MC9S08RC32CFGE MC9S08RC32CFG price MC9S08RC32CFG stock MC9S08RC32CFG application circuit MC9S08RC32CFG footprint

Связанные компоненты & термины

NXP Semiconductors MC9S08RC32CFG MC9S08RC32CFGE MC9S08RC32 S08 architecture 8-bit microcontroller microcontroller embedded processor semiconductor 32 KB flash memory 8 MHz clock 1.8 V to 3.6 V supply 44-LQFP LQFP package family surface-mount package SMD industrial control sensor monitoring communication interface motor control building control embedded instrumentation RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ