MC9S08RD60CFG - 8-Bit 8MHz 60KB Flash MCU | Motorola
Артикул: MC9S08RD60CFG ✓ АктивенMC9S08RD60CFG Обзор
An S08 microcontroller belongs to the 8-bit microcontroller family, which sits within the embedded-processing hierarchy of microcontroller, embedded processor, and semiconductor. Compared with 16-bit and 32-bit controllers, an 8-bit S08 device offers a simple instruction set and predictable execution behavior for motor control, appliance control, instrumentation, and dedicated peripheral management. Its on-chip flash reduces the need for external program memory in cost-sensitive embedded products.
Key characteristics include a maximum clock frequency of 8 MHz, 60 KB of flash organized as 60K x 8, and an industrial temperature grade. The 44-LQFP package exposes the controller in a standardized square gull-wing format suitable for automated assembly and multilayer printed circuit boards. The part is identified by the MC9S08RD60CFG order code, with the final suffix denoting the specific package, temperature, and ordering configuration.
The S08 architecture uses a CISC-style instruction set with an integrated interrupt mechanism for responsive event handling. Program and constant data are stored in the internal flash array, while the device also provides the peripheral resources expected for embedded control applications. Exact RAM organization, peripheral channel counts, analog reference performance, and conversion timing should be confirmed in the MC9S08RD60 family datasheet before a new PCB is released.
Typical uses include industrial sensor controllers, motor and valve control modules, compact appliance controllers, building equipment interfaces, and low-cost peripheral boards. The 8 MHz S08 core is appropriate when tasks combine digital I/O, timers, serial communication, and modest control calculations rather than intensive data processing or high-resolution graphics.
When designing a board, follow the family pin-description table for every signal assignment and place bypass capacitors close to the supply pins. Confirm operating voltage, clock configuration, peripheral multiplexing, and programming headers against the manufacturer documentation. Because legacy-package suffixes can differ in temperature grade and lifecycle treatment, confirm the exact ordering code before releasing a production BOM.
This page organizes the core device identity, package information, sourcing path, alternative considerations, and engineering guidance into one reference. It also highlights the checks that matter most when sustaining an existing MC9S08RD60CFG design, including pin compatibility, supply voltage, temperature grade, code compatibility, and long-term procurement planning.
Аналоги без доработки для MC9S08RD60CFG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08RD60CFG (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Package, Supply Voltage.
MC9S08RD60CF
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08RD60CG
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08RD60CV
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08RD60CPE-FR
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →MC9S08RD60CD
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC9S08RD60CFG Максимальные параметры и электрические характеристики
| Product Type | 8-bit S08 CISC microcontroller |
| Maximum CPU Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8) |
| Program Memory Type | Embedded flash |
| Напряжение питания | 2.5 V or 3.3 V |
| Корпус | 44-LQFP (10 x 10 mm) |
| Number of Terminals | 44 |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
| Architecture | S08 CISC |
| Тип монтажа | Surface mount |
Руководство по цоколевке MC9S08RD60CFG в корпусе square
Цоколевка для MC9S08RD60CFG (корпус square). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S08RD60CFG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S08RD60CFG подходит для 6 применениеs: Industrial Motor and Valve Controllers, Building Equipment and Environmental Control, Appliance and Kitchen Equipment Control, Sensor Hubs and Data Acquisition Modules, Ethernet Edge and Network Interface Equipment, Programmable Logic and Embedded Control.
Industrial Motor and Valve Controllers
The MC9S08RD60CFG suits compact motor, solenoid, and valve control modules where an 8-bit S08 core is sufficient for deterministic sequencing rather than high-bandwidth motion processing. Its 8 MHz clock supports interrupt-driven control loops, and 60 KB of embedded flash holds application code and lookup tables without a separate program-memory device. The 44-LQFP package also preserves a compact board outline for distributed actuator modules. Confirm the exact timer, PWM, and analog-channel resources in the family datasheet, and budget input filtering and output-driver protection for industrial noise conditions.
Рекомендуется
Building Equipment and Environmental Control
The MC9S08RD60CFG can act as the central controller in a room-control, sensor-hub, or small building-equipment module. Its 60 KB of internal flash is useful for sensor tables, control constants, and diagnostic logging, while the 8 MHz S08 core handles periodic sampling and actuator decisions. The industrial-grade ordering option suits equipment operating beyond consumer temperature ranges. Design the power path for reliable 2.5 V or 3.3 V regulation, use the family pin table for peripheral multiplexing, and isolate field-wired inputs so electromagnetic transients do not propagate into the controller.
Рекомендуется
Appliance and Kitchen Equipment Control
For appliances, the MC9S08RD60CFG provides a cost-conscious control platform for motor sequencing, temperature monitoring, keypad input, and fault reporting. The 8 MHz S08 processor handles multiple time-based tasks, and the 60 KB flash capacity accommodates embedded control logic and diagnostic data. The 44-LQFP footprint is readily handled by automated assembly and allows a relatively small control board. Confirm the required timer outputs, analog measurement accuracy, and brownout behavior, and place local bypass capacitance at the supply pins according to the manufacturer layout guidance.
Рекомендуется
Sensor Hubs and Data Acquisition Modules
The MC9S08RD60CFG is appropriate for a compact acquisition node that gathers digital measurements and forwards processed results over a serial link. Its embedded 60 KB flash removes an external memory component from many designs, while the 8 MHz S08 core handles sensor polling and packet preparation. The device also fits instruments that need deterministic I/O timing without a high-power processor. Validate the ADC resolution, sampling time, channel multiplexing, and serial peripheral mapping from the family documentation before fixing the schematic, and use isolated or level-shifted interfaces when connecting external sensors.
Рекомендуется
Ethernet Edge and Network Interface Equipment
The MC9S08RD60CFG can serve as an auxiliary controller in a network interface or edge module that handles configuration, status, and low-speed management tasks around a dedicated Ethernet device. Its 8 MHz S08 core is adequate for supervisory logic, and the 60 KB flash capacity can hold configuration firmware and a network stack where processing demand is modest. Use a companion Ethernet controller for high-rate traffic rather than expecting the S08 core to absorb sustained packet processing. Validate 3.3 V supply sequencing, isolation strategy, and signal levels between the microcontroller and network interface.
Рекомендуется
Programmable Logic and Embedded Control
The MC9S08RD60CFG is useful as the supervisory processor in a programmable controller that combines logic functions with embedded automation code. The 8-bit CISC architecture supports compact code and predictable interrupt handling, while 60 KB of flash provides room for configuration tables and application routines. Its 44-LQFP package allows mounting alongside interface or driver components without a large thermal design. Review pin multiplexing carefully because alternate peripheral functions can change board behavior, and validate the controller against the exact timing requirements of the attached logic and relay stages.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08RD60CFG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08RD60CF | MC9S08RD60CG | MC9S08RD60CV | MC9S08RD60CP | MC9S08RD60CD |
|---|---|---|---|---|---|---|
| Brand | Motorola Solutions | Motorola Solutions | Motorola Solutions | Motorola Solutions | Motorola Solutions | Motorola Solutions |
| Package | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) |
| CPU Architecture | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC | 8-bit S08 CISC |
| Maximum CPU Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| Flash Memory | 60 KB (60K x 8) | 60 KB | 60 KB | 60 KB | 60 KB | 60 KB |
| Supply Voltage | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
Ключевые отличия
- Exact CFG industrial configuration (против MC9S08RD60CF)
- Sustained embedded-code capacity without external program memory (против MC9S08RD60CV)
- Established 44-LQFP footprint for existing board reuse (против MC9S08RD60CG)
Заметки по проектированию
Use the family package drawing to verify the 44-LQFP land pattern and lead geometry rather than relying on a generic QFP footprint. Place the required supply bypass capacitors adjacent to the VDD pins, keep the ground-return path short, and route sensitive clock or reset signals away from switching nodes. The 10 x 10 mm body leaves limited lead-bend clearance, so assembler-specific footprint tolerances should be reviewed before release.
Design the regulator for the selected 2.5 V or 3.3 V operating point and include margin for startup current, flash writes, attached peripherals, and temperature-dependent consumption. Confirm the absolute maximum and recommended operating limits in the MC9S08RD60 family datasheet. Use local decoupling at the device and provide a stable clock supply or an appropriate oscillator arrangement for timing-critical control loops.
Do not substitute the MC9S08RD60 family solely by flash capacity. The ordering suffix can change temperature grade, qualification, or commercial availability, and a device with the same package may still have different pin options. Compare the ordering table, electrical limits, package drawing, and pin multiplexing for every alternative, then recompile and validate the existing firmware against the selected part.
Follow the manufacturer recommended decoupling and layout sequence because an S08 design can be sensitive to supply transients during flash programming and peripheral switching. Keep programming-test points accessible for production programming and recovery. For externally connected signals, add appropriate protection against electrostatic discharge and industrial transients ahead of the controller pins.
Информация о соответствии
The industrial temperature grade is identified for MC9S08RD60CFG, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was found in the available product information.