MC9S12XDP512CPV - 16-bit HCS12X MCU, 512KB Flash | NXP
Артикул: MC9S12XDP512CPV ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $21.99 | $21,99 |
| 10 | $19.85 | $198,50 |
| 100 | $17.92 | $1.792,00 |
| 500 | $16.08 | $8.040,00 |
| 1.000 | $14.5 | $14.500,00 |
MC9S12XDP512CPV Обзор
A 16-bit microcontroller (MCU) is a programmable computing IC that integrates a CPU, memory, peripherals, and I/O onto a single silicon die. The HCS12X family extends the legacy HCS12 with the XGATE auxiliary processor, an independent RISC engine that offloads interrupt-driven tasks from the main CPU. This dual-processor architecture shortens event-to-action latency and is a key reason the S12XD family remains widely deployed in automotive body controllers and CAN/LIN gateway ECUs.
Key features include 50 MHz bus frequency (up to 80 MHz on derivatives), 91 I/O pins, CAN 2.0A/B controllers (msCAN12 modules), SCI, SPI, I2C, an 8-channel PWM, and a 16-channel 10-bit ADC. The 4KB EEPROM supports byte-erasable non-volatile parameter storage for vehicle configuration and OBD-II diagnostic data. The 112-LQFP package exposes an External Bus Interface (EBI) for off-chip memory expansion or external peripheral addressing.
Typical applications include automotive body control modules, HVAC controllers, instrument clusters, CAN/LIN gateways, and industrial automation PLCs. The wide operating temperature range (-40C to +85C for the CPV industrial-grade suffix) suits under-hood and cabin environments. The XGATE co-processor is particularly effective in CAN message routing where multiple bus frames per millisecond require offloaded processing.
When designing with this MCU, allocate the XGATE vector table and data buffers in the first 4KB of SRAM to avoid cross-bar bus contention with the S12X core. Always validate Flash read-while-write behavior against your bootloader layout before committing to A/B partition schemes. Use the on-chip 4KB EEPROM for calibration constants rather than wear-intensive counters; for high-endurance counters, mirror them in a wear-leveled Flash sector.
Аналоги без доработки для MC9S12XDP512CPV — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S12XDP512CPV (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Mounting Type, EEPROM, Core.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S12XDP512CPVE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S12XDP512CAL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S12XEQ512CAL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
S912XEQ512J2MAL
✅ Прямая замена✓ В наличии
$17.95 / шт.
Открыть даташит →MC9S12DP512CPVER
✅ Прямая замена✓ В наличии
$64.0452 / шт.
Открыть даташит →MC9S12XDP512CPV Максимальные параметры и электрические характеристики
| Core Architecture | HCS12X with XGATE co-processor |
| Разрядность шины данных | 16-bit |
| Program Memory Size | 512 KB Flash |
| RAM Size | 32 KB (12 KB standard, derivative-dependent) |
| EEPROM Size | 4 KB |
| Максимальная тактовая частота | 50 MHz bus (80 MHz on S12XD family) |
| Number of I/O Pins | 91 |
| Корпус | 112-LQFP |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40C to +85C (CPV industrial grade) |
| Supply Voltage Range | 2.8 V to 5.5 V |
| CAN Controllers | 5x msCAN12 (CAN 2.0A/B) |
| Serial Interfaces | SCI, SPI, I2C |
| ADC | 16-channel 10-bit |
| PWM Channels | 8-channel |
| Статус RoHS | Compliant |
| Lead-Free | Yes |
| AEC-Q100 Qualified | Not qualified (CPV industrial grade - choose MC9S12XDP512CPVE for automotive) |
Конфигурация выводов MC9S12XDP512CPV
| Контакт 1 | PE0/XADDR0 — Port E I/O or external address bus |
| Контакт 2 | PE1/XADDR1 — Port E I/O or external address bus |
| Контакт 3 | PE2/XADDR2 — Port E I/O or external address bus |
| Контакт 4 | PE3/XADDR3 — Port E I/O or external address bus |
| Контакт 5 | PE4/XADDR4 — Port E I/O or external address bus |
| Контакт 6 | PE5/XADDR5 — Port E I/O or external address bus |
| Контакт 7 | PE6/XADDR6 — Port E I/O or external address bus |
| Контакт 8 | PE7/XADDR7 — Port E I/O or external address bus |
| Контакт 9 | BKGD — Background Debug Mode pin |
| Контакт 10 | PD0 — Port D I/O (CAN0 Rx) |
| Контакт 11 | PD1 — Port D I/O (CAN0 Tx) |
| Контакт 12 | VDDR |
| Контакт 13 | VDDX1 |
| Контакт 14 | VSSX1 |
| Контакт 15 | RESET — External reset input (active low) |
| Контакт 16 | VSS — Digital ground |
| Контакт 17 | VDD — Digital supply voltage |
| Контакт 18 | PA0 — Port A I/O (PWM0) |
| Контакт 19 | PA1 — Port A I/O (PWM1) |
| Контакт 20 | PA2 — Port A I/O (PWM2) |
| Контакт 21 | PA3 — Port A I/O (PWM3) |
| Контакт 22 | PA4 — Port A I/O (PWM4) |
| Контакт 23 | PA5 — Port A I/O (PWM5) |
| Контакт 24 | PA6 — Port A I/O (PWM6) |
| Контакт 25 | PA7 — Port A I/O (PWM7) |
| Контакт 26 | PB0 — Port B I/O (SPI/SCI) |
| Контакт 27 | PB1 — Port B I/O (SPI/SCI) |
| Контакт 28 | PB2 — Port B I/O (SPI/SCI) |
| Контакт 29 | PB3 — Port B I/O (SPI/SCI) |
| Контакт 30 | PB4 — Port B I/O (SPI/SCI) |
| Контакт 31 | PB5 — Port B I/O (SPI/SCI) |
| Контакт 32 | PB6 — Port B I/O (SPI/SCI) |
| Контакт 33 | PB7 — Port B I/O (SPI/SCI) |
| Контакт 34 | PC0 — Port C I/O (CAN1 Rx) |
| Контакт 35 | PC1 — Port C I/O (CAN1 Tx) |
| Контакт 36 | PC2 — Port C I/O (CAN2 Rx) |
| Контакт 37 | PC3 — Port C I/O (CAN2 Tx) |
| Контакт 38 | PC4 — Port C I/O (CAN3 Rx) |
| Контакт 39 | PC5 — Port C I/O (CAN3 Tx) |
| Контакт 40 | PC6 — Port C I/O (CAN4 Rx) |
| Контакт 41 | PC7 — Port C I/O (CAN4 Tx) |
| Контакт 42 | PJ0 — Port J I/O (CAN0/SCI) |
| Контакт 43 | PJ1 — Port J I/O (CAN0/SCI) |
| Контакт 44 | PJ2 — Port J I/O |
| Контакт 45 | PJ3 — Port J I/O |
| Контакт 46 | PJ4 — Port J I/O |
| Контакт 47 | PJ5 — Port J I/O |
| Контакт 48 | PJ6 — Port J I/O |
| Контакт 49 | PJ7 — Port J I/O |
| Контакт 50 | PK0 — Port K I/O |
| Контакт 51 | PK1 — Port K I/O |
| Контакт 52 | PK2 — Port K I/O |
| Контакт 53 | PK3 — Port K I/O |
| Контакт 54 | PK4 — Port K I/O |
| Контакт 55 | PK5 — Port K I/O |
| Контакт 56 | PK6 — Port K I/O |
| Контакт 57 | PK7 — Port K I/O |
| Контакт 58 | PM0 — Port M (CAN5 Rx) |
| Контакт 59 | PM1 — Port M (CAN5 Tx) |
| Контакт 60 | PM2 — Port M I/O |
| Контакт 61 | PM3 — Port M I/O |
| Контакт 62 | PM4 — Port M I/O |
| Контакт 63 | PM5 — Port M I/O |
| Контакт 64 | PM6 — Port M I/O |
| Контакт 65 | PM7 — Port M I/O |
| Контакт 66 | VDDA — Analog supply voltage |
| Контакт 67 | VAREF — ADC reference voltage |
| Контакт 68 | VSSA — Analog ground |
| Контакт 69 | PAD00 — Port AD 0 (ADC input) |
| Контакт 70 | PAD01 — Port AD 1 (ADC input) |
| Контакт 71 | PAD02 — Port AD 2 (ADC input) |
| Контакт 72 | PAD03 — Port AD 3 (ADC input) |
| Контакт 73 | PAD04 — Port AD 4 (ADC input) |
| Контакт 74 | PAD05 — Port AD 5 (ADC input) |
| Контакт 75 | PAD06 — Port AD 6 (ADC input) |
| Контакт 76 | PAD07 — Port AD 7 (ADC input) |
| Контакт 77 | PAD08 — Port AD 8 (ADC input) |
| Контакт 78 | PAD09 — Port AD 9 (ADC input) |
| Контакт 79 | PAD10 — Port AD 10 (ADC input) |
| Контакт 80 | PAD11 — Port AD 11 (ADC input) |
| Контакт 81 | PAD12 — Port AD 12 (ADC input) |
| Контакт 82 | PAD13 — Port AD 13 (ADC input) |
| Контакт 83 | PAD14 — Port AD 14 (ADC input) |
| Контакт 84 | PAD15 — Port AD 15 (ADC input) |
| Контакт 85 | PT0 — Port T I/O (TIM0) |
| Контакт 86 | PT1 — Port T I/O (TIM1) |
| Контакт 87 | PT2 — Port T I/O (TIM2) |
| Контакт 88 | PT3 — Port T I/O (TIM3) |
| Контакт 89 | PT4 — Port T I/O (TIM4) |
| Контакт 90 | PT5 — Port T I/O (TIM5) |
| Контакт 91 | PT6 — Port T I/O (TIM6) |
| Контакт 92 | PT7 — Port T I/O (TIM7) |
| Контакт 93 | PS0 — Port S I/O (SPI0) |
| Контакт 94 | PS1 — Port S I/O (SPI0) |
| Контакт 95 | PS2 — Port S I/O (SPI0) |
| Контакт 96 | PS3 — Port S I/O (SPI0) |
| Контакт 97 | PS4 — Port S I/O |
| Контакт 98 | PS5 — Port S I/O |
| Контакт 99 | PS6 — Port S I/O |
| Контакт 100 | PS7 — Port S I/O |
| Контакт 101 | XOUT — Crystal/oscillator output |
| Контакт 102 | XIN — Crystal/oscillator input |
| Контакт 103 | EXTAL — External clock input |
| Контакт 104 | XTAL — Crystal connection |
| Контакт 105 | PE0 — Port E I/O |
| Контакт 106 | PE1 — Port E I/O |
| Контакт 107 | PE2 — Port E I/O |
| Контакт 108 | PE3 — Port E I/O |
| Контакт 109 | PE4 — Port E I/O |
| Контакт 110 | PE5 — Port E I/O |
| Контакт 111 | PE6 — Port E I/O |
| Контакт 112 | PE7 — Port E I/O |
Типичное применение
MC9S12XDP512CPV подходит для 6 применениеs: Automotive Body Control Module, CAN/LIN Gateway ECU, Industrial PLC Controller, HVAC Climate Controller, Instrument Cluster Display Controller, Motor Control ECU.
Automotive Body Control Module
The MC9S12XDP512CPV is well-suited to body control modules (BCMs) that manage lights, door locks, wipers, and comfort accessories across CAN and LIN networks. Its 512KB Flash stores full BCM application code including seat memory, anti-pinch window logic, and diagnostic routines, while the 32KB SRAM holds CAN frame buffers and XGATE descriptors. Five on-chip msCAN12 controllers handle up to five independent CAN channels simultaneously - critical for vehicle architectures separating powertrain, body, and chassis domains. The XGATE co-processor offloads CAN message processing at twice the bus clock, keeping frame-to-ECU latency below 100 microseconds. Compared to 32-bit Cortex-M alternatives, this part delivers lower BOM cost at the expense of DSP performance, making it appropriate where deterministic real-time response outweighs raw compute.
Рекомендуется
CAN/LIN Gateway ECU
As a CAN-to-CAN or CAN-to-LIN gateway, the MC9S12XDP512CPV's five msCAN12 controllers and XGATE co-processor provide efficient frame routing between vehicle network segments. The HCS12X core runs the routing table and diagnostics, while XGATE executes CAN transmit/receive FIFOs in parallel, eliminating CPU jitter on high-load buses. Gateway latency budget (typically under 250 microseconds per frame) is comfortably met by XGATE's zero-overhead context switching. The 4KB EEPROM stores ECU calibration data and gateway configuration. Choose the MC9S12XDP512CPVE variant for under-hood or chassis-side gateways requiring AEC-Q100 automotive qualification; CPV suffices for in-cabin body gateways.
Рекомендуется
Industrial PLC Controller
The MC9S12XDP512CPV serves as the main MCU in compact industrial PLCs managing digital I/O, analog sensor inputs, and CANopen or DeviceNet fieldbus networks. Five on-chip CAN controllers enable multi-master industrial fieldbus implementations, while the 16-channel 10-bit ADC reads 4-20 mA loop signals and thermocouples through external front ends. At -40C to +85C industrial operating range, the CPV grade handles factory floor thermal stress without additional cooling. The 8-channel PWM block drives solenoids, motor soft-starters, and proportional valves. Compared to 32-bit Cortex-M0+ alternatives, this part offers more CAN channels and a larger memory map at similar cost, ideal for mid-range PLCs.
Рекомендуется
HVAC Climate Controller
In automotive and industrial HVAC controllers, the MC9S12XDP512CPV manages temperature sensing via its 16-channel ADC, drives blower motor PWM at variable duty for closed-loop airflow control, and communicates over CAN with the body network. The 512KB Flash stores multi-zone climate logic including PID loops, defrost scheduling, and seat heater matrix control. The 32KB SRAM supports per-zone setpoint memory and CAN transmit buffer pooling. XGATE handles the 10 ms HVAC control loop deterministically while the main CPU runs the user interface and diagnostics. The CPV industrial temperature grade fits in-cabin HVAC modules; choose CPVE for under-hood HVAC actuators subjected to higher thermal stress.
Рекомендуется
Instrument Cluster Display Controller
Driving analog gauges, segmented LCD, or TFT instrument clusters, the MC9S12XDP512CPV provides 91 GPIO pins for instrument lighting, stepper motor gauge drives, and warning lamp matrices. The External Bus Interface exposes the address/data bus for connecting external graphics memory or large displays. Two CAN interfaces handle powertrain CAN and body CAN simultaneously, while SCI/SPI serve the cluster backlight and LIN slave ECUs. The 4KB EEPROM retains odometer, trip meter, and user preferences across battery disconnects. This part suits mid-range clusters where cost-per-feature is critical; premium clusters migrate to Cortex-M4 with TFT controllers for richer graphics.
Рекомендуется
Motor Control ECU
Brushless DC and stepper motor control ECUs benefit from the MC9S12XDP512CPV's 8-channel PWM with hardware dead-time insertion, 16-channel 10-bit ADC for current sensing, and XGATE co-processor for sub-millisecond control loops. The HCS12X core runs the FOC algorithm at 50 MHz while XGATE handles encoder feedback and PWM fault handling. Five CAN controllers enable multi-axis networked drives. The 112-LQFP package exposes sufficient pins for three-phase inverter drive with parallel low-side current shunts. For servo drives and robotics, choose CPVE automotive/industrial extended temperature grade; CPV suffices for consumer-grade appliances.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S12XDP512CPV — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S12XDP512CPVE | MC9S12XDP512CAL | MC9S12XEQ512CAL | S912XEQ512J2MAL | MC9S12DP512CPVER |
|---|---|---|---|---|---|---|
| Package | 112-LQFP | 112-LQFP (same) | 112-LQFP (same) | 112-LQFP (same) | 112-LQFP (same) | 112-LQFP (same) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12X with XGATE | HCS12X with XGATE | HCS12X with XGATE | HCS12X with XGATE | HCS12X with XGATE | HCS12 (no XGATE) |
| Program Memory | 512 KB Flash | 512 KB Flash | 512 KB Flash | 512 KB Flash | 512 KB Flash | 512 KB Flash |
| CAN Controllers | 5x msCAN12 | 5x msCAN12 | 5x msCAN12 | 3x msCAN12 (E variant) | 3x msCAN12 (E variant) | 5x msCAN12 |
| Operating Temperature | -40C to +85C (CPV industrial) | -40C to +125C (CPVE automotive) | -40C to +85C (CAL industrial) | -40C to +85C (CAL) | -40C to +85C (MAL industrial) | -40C to +125C (AEC-Q100) |
| AEC-Q100 Qualified | No | Yes | No | No | No | Yes |
| Bus Frequency | 50 MHz | 50 MHz | 80 MHz (CAL derivative) | 50 MHz | 50 MHz | 25 MHz (DP generation) |
Ключевые отличия
- Higher CAN count than S12XE variants (против MC9S12XEQ512CAL)
- XGATE co-processor doubles effective throughput (против MC9S12DP512CPVER)
- Industrial temperature grade at lower cost than automotive (против MC9S12XDP512CPVE)
Заметки по проектированию
The MC9S12XDP512CPV requires a 2.8V to 5.5V digital supply on VDD/VDDX and a separate analog supply VDDA with VAREF and VSSA. Place 100 nF ceramic decoupling capacitors as close as possible to each VDD pin, plus a 10 uF bulk tantalum or ceramic at the regulator output. For sleep-mode operation, the VDDR regulator supplies 2.5V to internal logic; ensure VDDX load does not exceed 50 mA peak to avoid VDDR dropouts that cause Flash read-while-write corruption.
Route the oscillator signals XIN/XOUT and EXTAL/XTAL on the top layer over a continuous ground pour, with traces kept short (under 10 mm) and surrounded by ground guard rings. The 112-LQFP has 0.5 mm pitch pins - use 0.25 mm trace width with 0.45 mm pads and microvia fan-outs to escape inner layers. Keep CAN differential pairs impedance-matched to 120 ohms with no stubs, and place TVS protection diodes within 5 mm of the connector.
The XGATE co-processor shares the system crossbar with the HCS12X core, so high-throughput peripheral traffic on msCAN12 modules can starve the main CPU. Estimated: at 100% CAN bus utilization across all 5 controllers simultaneously, the main CPU may stall 30-40% of cycles. Design XGATE descriptors to handle CAN frame servicing autonomously, freeing the main core for application logic.
Do not enable read-while-write (RWW) with Flash partitions larger than 256 KB unless the user stack and interrupt vectors are in the protected partition - otherwise a mid-write vector fetch can corrupt the PC. Always issue the NVROT register lock sequence before enabling Flash security, as an unlocked NVROT allows unauthorized code read. For bootloader designs, reserve sectors F000-F7FF for application code and F800-FFFF for bootloader.
Информация о соответствии
RoHS and REACH compliant per NXP product declaration. The CPV suffix is industrial-grade; for AEC-Q100 qualification choose the CPVE variant or check the S912X prefix parts for AEC-Q100 release.
