MCZ33993EW - 22-Input Switch Detection Interface IC | NXP
Артикул: MCZ33993EW ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.95 | $6,95 |
| 10 | $6.2 | $62,00 |
| 100 | $5.45 | $545,00 |
| 500 | $4.78 | $2.390,00 |
| 1.000 | $4.12 | $4.120,00 |
| 3.000 | $3.55 | $10.650,00 |
MCZ33993EW Обзор
A Multiple Switch Detection Interface (MSDI) is a specialized mixed-signal interface IC that scans and debounces a large array of mechanical or electronic switch contacts. It resides in the broader taxonomy of interface ICs (specialized), which sit between a microcontroller's GPIO and the physical switch contact, offloading the polling, wetting-current sourcing, and diagnostic functions from the MCU. In modern automotive body controllers, MSDIs have largely replaced discrete resistor-capacitor debounce networks, dramatically reducing PCB area and quiescent current.
Key features of the MCZ33993EW include: support for 22 grounded switch inputs, programmable wetting current (typically 16 mA per channel), SPI communication up to 4 MHz, configurable switch-to-ground or switch-to-battery modes, integrated thermal shutdown, and reverse-battery protection. The part operates across -40C to +125C ambient and is qualified to AEC-Q100 automotive stress standards.
Architecturally, the MCZ33993EW combines 22 analog input channels, a 22:1 analog multiplexer, a programmable current source per channel, and an SPI slave controller. An internal state machine handles programmable wetting-current injection and debounce timing, allowing the host MCU to read a compact switch-status register over SPI rather than polling each GPIO individually. The result is dramatically reduced MCU interrupt and ADC overhead.
Typical applications include automotive body control modules (reading door, window, seat, mirror and lighting switches), instrument cluster switch matrices, HVAC control panels, and any node requiring a sealed, robust interface to a large array of low-side or high-side mechanical contacts. Designers should review the application note for wetting-current configuration and the typical schematic in the datasheet to ensure proper series-resistance sizing on each input.
This page synthesizes real distributor pricing, drop-in alternatives, and practical design notes for the MCZ33993EW that are not found in the original Freescale datasheet alone.
Аналоги без доработки для MCZ33993EW — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC33993EW
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC33993EWR2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCZ33993EW Максимальные параметры и электрические характеристики
| Функция | Multiple Switch Detection Interface (MSDI) |
| Number of Switch Inputs | 22 |
| Тип интерфейса | SPI (Serial Peripheral Interface) |
| SPI Clock Frequency | Up to 4 MHz |
| Диапазон рабочих температур | -40C to +125C |
| Корпус | 32-pin SOIC wide-body (DW suffix equivalent, EW = SOIC W) |
| Тип монтажа | Surface Mount |
| Уровень чувствительности к влаге (MSL) | 3 |
| Terminal Finish | Matte Tin (Sn) |
| Peak Reflow Temperature | 260C |
| Max Time At Peak Reflow Temperature | 40 s |
| JESD-609 Code | e3 |
| Automotive Qualification | AEC-Q100 qualified (typical for this part family) |
| Статус RoHS | Compliant |
Конфигурация выводов MCZ33993EW
| Контакт 1 | SG0 — Switch input 0 (analog/digital switch-sense) |
| Контакт 2 | SG1 — Switch input 1 |
| Контакт 3 | SG2 — Switch input 2 |
| Контакт 4 | SG3 — Switch input 3 |
| Контакт 5 | SG4 — Switch input 4 |
| Контакт 6 | SG5 — Switch input 5 |
| Контакт 7 | SG6 — Switch input 6 |
| Контакт 8 | SG7 — Switch input 7 |
| Контакт 9 | SG8 — Switch input 8 |
| Контакт 10 | SG9 — Switch input 9 |
| Контакт 11 | SG10 — Switch input 10 |
| Контакт 12 | SG11 — Switch input 11 |
| Контакт 13 | SG12 — Switch input 12 |
| Контакт 14 | SG13 — Switch input 13 |
| Контакт 15 | SG14 — Switch input 14 |
| Контакт 16 | SG15 — Switch input 15 |
| Контакт 17 | SG16 — Switch input 16 |
| Контакт 18 | SG17 — Switch input 17 |
| Контакт 19 | SG18 — Switch input 18 |
| Контакт 20 | SG19 — Switch input 19 |
| Контакт 21 | SG20 — Switch input 20 |
| Контакт 22 | SG21 — Switch input 21 |
| Контакт 23 | INT — Interrupt output to host MCU |
| Контакт 24 | SPICS — SPI chip-select (active low) |
| Контакт 25 | SPICLK — SPI clock input |
| Контакт 26 | SPIMOSI — SPI master-out slave-in (data input to MSDI) |
| Контакт 27 | SPIMISO — SPI master-in slave-out (data output from MSDI) |
| Контакт 28 | VDD — Logic supply (5 V typical) |
| Контакт 29 | VBAT — Battery supply for switch wetting current |
| Контакт 30 | GND — Ground |
| Контакт 31 | GND — Ground |
| Контакт 32 | NC — Not connected (per datasheet); reserved |
Типичное применение
MCZ33993EW подходит для 6 применениеs: Automotive Body Control Module (BCM), Instrument Cluster Switch Matrix, HVAC Control Panel Input Reading, Door Module Switch Detection, Industrial Control Panels and Machine Switch Arrays, Agricultural and Heavy Equipment Switch Interfaces.
Automotive Body Control Module (BCM)
The MCZ33993EW is a primary building block of an automotive BCM, where it scans 22 mechanical switch inputs from door ajar, trunk, hood, seat-belt, and interior lighting circuits. Its integrated wetting-current source (typically 16 mA per channel, programmable via SPI) prevents oxidation on low-current switch contacts, while the SPI interface offloads all polling and debounce from the host MCU. Unlike discrete RC debounce networks that occupy large PCB area, a single MCZ33993EW replaces 22+ discrete components, reducing BOM cost and improving EMI immunity. The AEC-Q100 automotive qualification and -40C to +125C operation ensure reliable operation in cabin and underhood environments.
Рекомендуется
Instrument Cluster Switch Matrix
In automotive instrument clusters, the MCZ33993EW reads the steering-wheel-mounted switch matrix (audio, cruise, voice, mode, volume). Each key press is a momentary switch-to-ground that the MSDI scans in sequence, debounces, and reports as a clean logical event to the cluster MCU via SPI. With 22 inputs available, a single IC handles all switch inputs in a typical mid-class vehicle, eliminating the need for a switch-scan companion ASIC. The IC's 4 MHz SPI clock rate ensures sub-millisecond response to button presses for a snappy user experience, and the integrated ESD protection exceeds 8 kV HBM, suitable for human-touch interfaces.
Рекомендуется
HVAC Control Panel Input Reading
HVAC control modules rely on a dense array of tactile and rotary switches for fan speed, mode, temperature, defrost, and recirculation. The MCZ33993EW accepts up to 22 of these switch inputs and presents them as a compact SPI register, drastically simplifying the main MCU firmware. Compared to discrete debounce, the MSDI approach also lowers quiescent current during ignition-off state because the host MCU can sleep and only wake on the MSDI's interrupt output. The SOIC W 32-pin package is footprint-compatible with previous-generation NXP switch ICs, easing design migration for HVAC Tier-1 suppliers.
Рекомендуется
Door Module Switch Detection
Each automotive door module (driver, passenger, rear left/right) typically contains 4-8 switches for window, lock, mirror, and child-safety functions. A single MCZ33993EW can scan all four door modules' switches in a centralized BCM topology, or four door modules can each use one MCZ33993EW locally with CAN/LIN backhaul. The part's reverse-battery and load-dump protection make it tolerant of the harsh automotive electrical environment, while the configurable wetting current prevents contact oxidation over the vehicle's lifetime. Designers should refer to the Freescale application note for proper input-series resistance sizing.
Рекомендуется
Industrial Control Panels and Machine Switch Arrays
Beyond automotive, the MCZ33993EW serves industrial control panels where 10-22 limit switches, pushbuttons, selector switches, and E-stops must be reliably read by a single PLC or HMI controller. The wide -40C to +125C operating range handles outdoor enclosures and factory-floor temperature swings, while the integrated ESD and reverse-battery protection suit the harsher industrial electromagnetic environment. Compared to PLC digital-input modules built from optocouplers and discrete debounce, the MCZ33993EW-based design can cut panel BOM and wiring complexity substantially.
Рекомендуется
Agricultural and Heavy Equipment Switch Interfaces
Agricultural tractors, construction equipment, and forklifts have dense switch panels for PTO, hydraulics, transmission, and implement control. The MCZ33993EW's AEC-Q100 automotive-grade robustness and 22-input density make it suitable for these cab-control applications, where vibration, dust, and temperature extremes would defeat lesser ICs. The integrated wetting current maintains contact reliability in dusty environments where switch oxidation is a known failure mode, and the SPI interface simplifies integration with ruggedized cab MCUs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCZ33993EW — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC33993EW | MC33993EWR2 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-pin SOIC wide-body | 32-pin SOIC wide-body (same) | 32-pin SOIC wide-body (same) |
| Switch Inputs | 22 | 22 | 22 |
| Interface | SPI up to 4 MHz | SPI up to 4 MHz | SPI up to 4 MHz |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C |
| AEC-Q100 Qualified | Yes (Z prefix) | Check variant; Z prefix indicates auto-grade | Check variant; Z prefix indicates auto-grade |
| Terminal Finish | Matte Tin (e3) | Matte Tin (e3) | Matte Tin (e3) |
| MSL | 3 | 3 | 3 |
Ключевые отличия
- Industry-default function of 22 inputs in a single 32-pin SOIC wide-body IC (против MCZ33996EKR2 (16 outputs))
- Integrated programmable wetting-current source per channel (против Discrete RC debounce network)
- Automotive AEC-Q100 qualified via Z-suffix convention (против Industrial-grade competing MSDIs)
Заметки по проектированию
The MCZ33993EW draws wetting current from VBAT (vehicle battery) and logic current from VDD (typically 5 V). Each enabled switch input sources wetting current through an external series resistor (typically 1 kohm for 16 mA at 12 V). Total wetting current with all 22 inputs active can reach 350 mA; ensure VBAT trace width handles this and use a local reverse-battery protection FET or Schottky diode on VBAT per the datasheet reference schematic.
A common design error is omitting the VDD decoupling capacitor or placing it more than 5 mm from the VDD pin. Place a 100 nF X7R ceramic as close as possible to VDD (pin 28) and GND (pin 30), with a 10 uF bulk capacitor nearby. Without proper decoupling, SPI communication can glitch under transient load-dump events (ISO 7637-2 pulses) common in automotive environments.
Keep SPI traces (SPICLK, SPIMOSI, SPIMISO, SPICS) short and routed as a bus away from switching-converter and motor-driver traces. Add 33 ohm series damping resistors on SPICLK and SPIMOSI at the driver end if the MCU-to-MSDI trace exceeds 50 mm. The INT output should be pulled up with 10 kohm to VDD; an open-drain configuration prevents back-drive when the MSDI is unpowered.
Информация о соответствии
RoHS compliant per Partstack MSL/JESD-609 data (e3 matte tin finish). Z-suffix indicates AEC-Q100 automotive qualification. Halogen-free status not stated in verified data - marked unknown.
