NXP Semiconductors

MKE02Z64VLD4 - 40MHz Cortex-M0+ 64KB MCU | NXP | Automotive

Артикул: MKE02Z64VLD4 ✓ Активен
3.3 V / 5 V Vdss 44-LQFP, 10 mm x 10 mm Package 40 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

MKE02Z64VLD4 Обзор

NXP Semiconductors MKE02Z64VLD4 is a 40 MHz ARM Cortex-M0+ Kinetis KE02 microcontroller with 64 KB flash, 4 KB SRAM, integrated analog, and automotive body-control positioning in a 44-LQFP 10 mm by 10 mm package. The device combines a 32-bit processor, flexible memory, and mixed-signal peripherals in a compact surface-mount package suited to cost-sensitive, electrically noisy automotive systems. Its 3.3 V and 5 V operating capability and enhanced ESD and EMC performance make it a practical choice for body electronics, relay drivers, sensing modules, and compact actuator controllers.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals such as timers, communication interfaces, analog converters, and digital I/O into one device. The Kinetis KE02 belongs to the 32-bit microcontroller hierarchy and uses the ARM Cortex-M0+ architecture. This instruction set is designed for efficient embedded control, combining low power consumption, compact code execution, and a broad peripheral mix without requiring an external processor, memory, and support devices.

The MKE02Z64VLD4 provides 64 KB of flash for program storage and 4 KB of SRAM for working memory. Its 40 MHz Cortex-M0+ core supports responsive control tasks, while integrated analog reduces the component count for designs that measure analog signals or use PWM-based actuator control. The Kinetis KE02 family targets automotive body applications, including functions where a compact, robust controller is more appropriate than a higher-performance application processor. Operation from a 5 V rail simplifies compatibility with automotive body electrical systems.

The device uses an internal clocking system with an internal FLL and a 31.25 kHz pre-trimmed internal reference, together with a 1 kHz low-power oscillator. These clock resources support both performance-oriented control and reduced-power operating modes. The family is positioned for applications that require deterministic peripheral operation, broad I/O availability, and resistance to high electrical-noise environments. Exact conversion performance, timer specifications, and electrical limits must be confirmed in the manufacturer datasheet before final circuit design.

Typical uses include automotive body-control modules, window-lift and door-lock controllers, seat and lighting control, small motor drivers, sensor-conditioning nodes, and industrial motor-control products sharing the Kinetis KE02 peripheral architecture. Its 44-LQFP package provides enough pins for external interfaces and mixed-signal connections while remaining compatible with conventional automotive-board manufacturing processes. The same family is also used for cost-sensitive industrial applications requiring low-power 8-bit-class functionality with a 32-bit architecture.

PCB design should preserve the datasheet-defined power, ground, decoupling, clock, and programming connections. Place the required supply capacitors close to the device, provide adequate low-impedance ground distribution, and route exposed or high-energy signals away from sensitive analog inputs. The 10 mm by 10 mm LQFP geometry also requires checking paste volume, solder-joint inspection criteria, and assembly-profile clearance against the board outline and neighboring components.

This page combines the NXP product identity, package and memory characteristics, replacement options, and implementation guidance into a compact engineering reference. It helps designers evaluate the MKE02Z64VLD4 for 40 MHz embedded control while distinguishing verified same-package alternatives from merely similar automotive microcontrollers that require different footprints or software adaptation.

Аналоги без доработки для MKE02Z64VLD4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MKE02Z64VLD4 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Package, SRAM, Supply Voltage.

NXP Semiconductors
Flash Memory: 16 KB
Package: 44-LQFP, 10 x 10 mm
SRAM: 2 KB
Сравнить с MKE02Z64VLD4 →

MKE02Z64VLH4

✅ Прямая замена
📦 44-LQFP (10x10 mm)
CPU frequency, flash, and SRAM are unchanged at 40 MHz, 64 KB, and 4 KB; ordering-code temperature or qualification options require final verification.

📋 Справочный аналог (нет в каталоге)

MKE02Z64VLD4 Максимальные параметры и электрические характеристики

Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family Kinetis KE02
Maximum CPU Frequency 40 MHz
Flash Memory 64 KB (64K x 8)
SRAM 4 KB
CPU Architecture ARM Cortex-M0+
Напряжение питания 3.3 V / 5 V
Корпус 44-LQFP, 10 mm x 10 mm
Тип монтажа Surface mount
Packaging Tray
Clock Reference 31.25 kHz pre-trimmed internal reference
Low-Power Oscillator 1 kHz
Clock Architecture Internal FLL with internal or external reference
Analog Integration Integrated analog
Application Positioning Automotive body applications
ESD and EMC Positioning Enhanced ESD/EMC performance

Руководство по цоколевке MKE02Z64VLD4 в корпусе 44-lqfp, 10 mm x 10 mm

Цоколевка для MKE02Z64VLD4 (корпус 44-lqfp, 10 mm x 10 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 44-lqfp, 10 mm x 10 mm для MKE02Z64VLD4

Нет подробных данных о распиновке для MKE02Z64VLD4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MKE02Z64VLD4 подходит для 6 применениеs: Automotive Body-Control Module, Window and Door Lift Control, Automotive Sensor Interface, Compact Relay and Lighting Control, Small Motor Controller, Industrial Sensing and Control Node.

🚗

Automotive Body-Control Module

The MKE02Z64VLD4 fits a compact body-control module that must combine several discrete inputs, outputs, and timing functions in one 44-LQFP device. Its 40 MHz Cortex-M0+ core provides responsive execution for debouncing, state-machine logic, diagnostics, and actuator commands, while 64 KB of flash holds application firmware and 4 KB of SRAM supports working state. The integrated analog resources can reduce signal-conditioning requirements around body sensors. NXP specifically positions the KE02 family for automotive body applications and emphasizes enhanced ESD and EMC performance for electrically noisy environments. The design should use conservative power filtering, robust return paths, and validated transient protection at every external connection.

🚗

Window and Door Lift Control

A window-lift or door-lock controller can use the MKE02Z64VLD4 for motor timing, switch processing, current monitoring, and fault detection. The 40 MHz Cortex-M0+ core handles position-edge detection, debouncing, and controlled actuator sequencing without requiring a high-power processor. Its 64 KB of flash is suitable for a dedicated firmware image and diagnostic state machine, while 4 KB of SRAM provides runtime variables for timers and protection logic. Integrated analog may assist with sensing, but final motor-drive circuitry must include suitable protection and must be validated for automotive transients and load dump conditions.

🧩

Automotive Sensor Interface

The MKE02Z64VLD4 can act as a local sensor-interface controller in a body electronics network. The Cortex-M0+ core at up to 40 MHz supports filtering, calibration, threshold management, and diagnostic reporting, while 64 KB of flash provides room for configuration tables and protocol handling. Its integrated analog characteristics make it practical for systems that need local signal conditioning in addition to digital control. The MCU should be placed close to the sensor connector, with protection components and filtering arranged so switching or motor currents do not inject noise into the measurement path. Use the manufacturer's pin descriptions and recommended application circuit as the basis for the analog connections.

💡

Compact Relay and Lighting Control

For relay, indicator, and lighting control, the MKE02Z64VLD4 combines a 40 MHz control core with 64 KB of program memory and 4 KB of SRAM on a single device. Peripheral timers can support deterministic switching sequences, while firmware can implement debounce, delay, fault logging, and current-state diagnostics. The integrated analog resources may support feedback or monitoring functions where required. Because automotive relay and lighting circuits can present significant inductive and transient disturbances, the MCU supply and I/O paths need dedicated protection. Keep high-current switching loops physically separated from sensitive controller traces and follow the manufacturer layout guidance for grounding and decoupling.

🏭

Small Motor Controller

The MKE02Z64VLD4 is appropriate for small motor-control modules where deterministic timing, local I/O, and compact embedded firmware are more important than application-processing performance. Its 40 MHz Cortex-M0+ core can execute PWM sequencing, speed-control logic, and fault handling, while 64 KB of flash accommodates a focused motor-control application and 4 KB of SRAM supports control variables. The same KE02 architecture is also identified for motor-control and industrial applications. External MOSFETs, gate drivers, current sensing, and protection remain necessary; validate stall, startup, and thermal performance across the complete motor and supply range rather than treating the MCU ratings as a complete drive solution.

🏭

Industrial Sensing and Control Node

The MKE02Z64VLD4 can serve as a compact industrial sensing node when a system needs local acquisition, control, and communication without a larger application processor. The 64 KB flash stores control firmware, 4 KB of SRAM holds active state, and the 40 MHz Cortex-M0+ core handles digital filtering and supervisory control. Integrated analog helps reduce the need for a separate signal-conditioning IC in suitable measurement designs. The Kinetis KE02 family's availability in both automotive and industrial contexts supports reuse of the controller platform, although each product should use the ordering code with the required temperature and qualification profile. Confirm EMC, isolation, and grounding requirements for the target installation.

Сводка рекомендуемых товаров

MKE02Z64VLH4 Same-family Kinetis KE02 option Используется в: Automotive Body-Control Module, Window and Door Lift Control, Automotive Sensor Interface, Compact Relay and Lighting Control, Small Motor Controller, Industrial Sensing and Control Node MKE04Z128VLD4 Higher-memory Kinetis E-series controller Используется в: Automotive Body-Control Module, Window and Door Lift Control, Compact Relay and Lighting Control, Industrial Sensing and Control Node MKE06Z128VLD4 Higher-memory Kinetis E-series controller Используется в: Automotive Body-Control Module, Small Motor Controller, Industrial Sensing and Control Node MKE02Z64VLD4R Reel-packed ordering option of the target device Используется в: Automotive Sensor Interface
What are the key specifications of MKE02Z64VLD4 that engineers should know?
The MKE02Z64VLD4 is a 40 MHz ARM Cortex-M0+ Kinetis KE02 microcontroller with 64 KB of flash, 4 KB of SRAM, integrated analog, and a 44-LQFP 10 mm by 10 mm package. According to NXP's manufacturer datasheet, the device supports 3.3 V and 5 V operation and includes internal FLL clocking based on a 31.25 kHz pre-trimmed reference. Its primary design role is compact automotive body electronics, where the combination of local flash, SRAM, analog resources, and mixed-signal I/O reduces the need for external support components.
What is the MKE02Z64VLD4 used for?
The MKE02Z64VLD4 is primarily used for automotive body-control and related embedded-control functions. Its 40 MHz Cortex-M0+ core can execute responsive control logic, while 64 KB of flash and 4 KB of SRAM support self-contained firmware. NXP identifies integrated analog and automotive body applications as core capabilities. Typical uses include relay and motor-control modules, sensor interfaces, lighting controls, and compact body electronics, provided the complete electrical and timing requirements are checked against the manufacturer datasheet.
Where can I download the MKE02Z64VLD4 datasheet PDF?
The official MKE02Z64VLD4 datasheet PDF is available from NXP at https://www.nxp.com/mcds/MKE02Z64VLD4.pdf. The manufacturer document covers the KE02 sub-family and is the primary reference for pin assignments, electrical characteristics, clocking, memory, peripherals, and recommended application circuits. Engineers should use the NXP PDF for PCB design and firmware development rather than relying on a third-party mirror, because package drawings and revision-specific details must match the production device.
Where is the MKE02Z64VLD4 pinout located?
The MKE02Z64VLD4 pinout is documented in the pin connection table of NXP's manufacturer datasheet. The device uses a 44-LQFP package with a 10 mm by 10 mm body. Use the datasheet's package drawing and pin-description table when assigning signals, programming pads, decoupling connections, and ground returns. Do not substitute the pin arrangement of another Kinetis family member unless its package drawing and ordering information explicitly confirm the same physical pinout.
Is MKE02Z64VLD4 suitable for automotive body electronics?
Yes, the MKE02Z64VLD4 is suitable for automotive body electronics because NXP positions the Kinetis KE02 family for that market and emphasizes enhanced ESD and EMC performance for electrically noisy environments. Its 5 V operating capability, integrated analog, and 64 KB of on-chip flash support compact body-control modules. Final qualification still depends on the complete AEC-Q100 status, temperature grade, operating voltages, transient requirements, and validation standards that apply to the finished vehicle or industrial system.
How much memory does the MKE02Z64VLD4 have?
The MKE02Z64VLD4 contains 64 KB of flash memory and 4 KB of SRAM. Flash provides nonvolatile storage for firmware and constants, while SRAM supports stack, variables, working buffers, and real-time control state. According to NXP's manufacturer datasheet, the 32-bit Cortex-M0+ core operates at up to 40 MHz. These resources suit compact control tasks, but firmware growth, bootloader capacity, and peripheral data movement should be estimated before project commitment.
What clock sources does the MKE02Z64VLD4 use?
The MKE02Z64VLD4 supports an internal clock system with an FLL and a 31.25 kHz pre-trimmed internal reference that can be trimmed for operation up to a 40 MHz system clock. It also includes a 1 kHz low-power oscillator. The manufacturer documentation also describes internal or external reference configurations for the internal FLL. Clock accuracy requirements for communications, motor timing, or safety functions should be evaluated against the applicable source tolerances and the final system design.
What can replace the MKE02Z64VLD4?
The closest documented same-footprint replacement is the MKE02Z64VLH4, which retains 64 KB of flash, 4 KB of RAM, and a 40 MHz CPU while using a different ordering code. A direct substitution also depends on package, temperature, pin, qualification, and software requirements. The MKE02Z64VLD4R changes the reel packing rather than the functional device and should not be selected solely as an engineering alternative. Review the current NXP ordering information before approving any substitution.
Is MKE02Z64VLH4 a drop-in replacement for MKE02Z64VLD4?
The MKE02Z64VLH4 is the closest same-family candidate because NXP describes it with 64 KB of flash, 4 KB of RAM, and a 40 MHz CPU. However, a drop-in decision requires confirmation that the LQFP footprint, exposed connections, temperature grade, qualification, and enablement states are identical. Verify the complete ordering table and datasheet before substitution because different order codes can represent distinct temperature or screening options even when headline memory and clock ratings match.
MKE02Z64VLD4 vs MKE02Z64VLH4 - which is better for a new design?
Choose the MKE02Z64VLD4 when its exact ordering code satisfies the required operating temperature, qualification, and packaging rules; choose the MKE02Z64VLH4 when that ordering code matches the system specification. Both parts are associated with a 40 MHz CPU, 64 KB of flash, and 4 KB of RAM, so performance and memory are not the deciding criteria. The correct choice comes from the NXP ordering information, package details, qualification status, and lifecycle requirements rather than the similar core and memory ratings alone.
When should I choose MKE02Z64VLD4 instead of a similar automotive microcontroller?
Choose the MKE02Z64VLD4 when the design requires the established Kinetis KE02 combination of a 40 MHz Cortex-M0+ core, 64 KB flash, 4 KB SRAM, integrated analog, and a 44-LQFP footprint. It is especially appropriate for compact body-control modules that benefit from internal analog and mixed-signal I/O. Select a different MCU when software ecosystem, flash capacity, qualification, temperature range, communication mix, or package compatibility is more important than retaining the KE02 platform.
Is MKE02Z64VLD4 in stock?
Current stock and lead time should be requested through the Request a Quote form on this page. The product is identified by NXP as a MKE02Z64VLD4 Kinetis KE02 device, but live inventory can vary by package, region, and order quantity. The form allows the exact MPN, required quantity, and delivery expectations to be reviewed without relying on a generic stock statement or changing the source part number.
What is the price of MKE02Z64VLD4?
Use the Request a Quote form on this page for the current MKE02Z64VLD4 price, quantity breaks, and lead time. Quote conditions can depend on order volume, package, delivery destination, and program requirements, so a static price figure may not reflect the buyer's actual procurement terms. Submit the exact MKE02Z64VLD4 ordering code and requested quantity so the commercial response corresponds to the required device.
How do I order MKE02Z64VLD4 and confirm lead time?
Submit an inquiry through the Request a Quote form on this page with the exact MKE02Z64VLD4 MPN, required quantity, delivery location, and target date. The form is the appropriate channel for checking current availability, production allocation, and lead time. NXP ordering information should also be consulted if the application requires a formally released automotive part or a specific qualification and temperature profile.
What is the best NXP equivalent for the MKE02Z64VLD4?
The best documented NXP-family equivalent is the MKE02Z64VLH4 because it shares the headline 64 KB flash, 4 KB RAM, and 40 MHz CPU ratings within the Kinetis KE02 family. A cross-brand replacement cannot be treated as drop-in without a verified 44-LQFP pin comparison, peripheral mapping, clock setup, toolchain support, and qualification review. For a new cross-brand migration, use the manufacturer pin tables and application notes rather than relying only on CPU frequency and memory capacity.

Справочные инженерные данные для MKE02Z64VLD4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MKE02Z64VLD4 for a new automotive body-control or compact embedded-control design that specifically requires the 44-LQFP Kinetis KE02 platform, a 40 MHz Cortex-M0+ core, 64 KB of flash, and 4 KB of SRAM. The MKE02Z64VLH4 is the closest documented same-family alternative because its headline CPU, memory, and package ratings match; select it when its ordering code provides the required temperature, qualification, and lifecycle profile. The MKE02Z64VLD4R should be considered primarily for reel-packed manufacturing rather than as a functional redesign. Higher-memory Kinetis E-series devices are useful when firmware growth justifies moving away from the 64 KB baseline. A cross-brand MCU should be selected only after its 44-LQFP pin map, peripheral resources, clock tree, startup behavior, qualification, and software migration requirements have been reviewed in detail.

Сравнение с аналогами

Параметр Этот товар MKE02Z64VLH4
Package 44-LQFP (10x10 mm) 44-LQFP (10x10 mm)
Brand NXP Semiconductors NXP Semiconductors
Product Family Kinetis KE02 Kinetis KE02
CPU Core ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 40 MHz 40 MHz
Flash Memory 64 KB 64 KB
SRAM 4 KB 4 KB
Operating Voltage 3.3 V / 5 V 3.3 V / 5 V
Analog Integration Integrated analog Integrated analog
Ordering-Code Difference VLD4 ordering code VLH4 ordering code; temperature or qualification details require final verification

Ключевые отличия

  • Integrated analog reduces support-component count (против MKE02Z64VLH4)
  • Exact 40 MHz, 64 KB, and 4 KB compute profile (против MKE02Z64VLH4)
  • Package continuity for existing board revisions (против MKE02Z64VLH4)

Заметки по проектированию

Use the manufacturer package drawing and recommended application circuit to place all supply capacitors, grounding connections, programming pads, and signal-routing interfaces. Keep the 10 mm by 10 mm LQFP away from tall mechanical parts and verify board-edge clearance before releasing the PCB footprint. Confirm pad dimensions, exposed thermal or electrical connections, and assembly tolerances against the current NXP package drawing rather than copying a generic 44-pin QFP footprint.

Design the supply network for both steady-state and transient automotive or industrial conditions. Place the required local bypass capacitors at the device power pins with short ground returns, separate high-current load paths from sensitive control traces, and include the protection appropriate to the installation. The MCU's 3.3 V and 5 V operating capability does not define the external transient tolerance, so power, ground, and I/O ratings must be verified against the complete system's worst-case conditions.

Route communications, timer, and analog signals away from relay, motor, and switching-power-current paths. For analog measurements, use continuous ground references, short traces, and filtering located near the connector or sensor. Clock and reset networks should follow the manufacturer reference circuit. Avoid long parallel runs through electrically noisy automotive environments, and include test points that allow signal integrity and firmware diagnostics without changing the final grounding topology.

Do not select a replacement solely because it is described as an 8-bit or 32-bit automotive MCU with similar flash. Pin compatibility, peripheral mapping, clock initialization, memory size, startup behavior, qualification, and toolchain support must all be checked. The MKE02Z64VLH4 is the closest documented same-family candidate, while the MKE02Z64VLD4R primarily represents a different reel packing option. Confirm the current NXP ordering information before approving either substitution.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

NXP positions the Kinetis KE02 family for automotive body applications and highlights enhanced ESD/EMC performance. Formal RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified for this exact ordering code.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

mke02z64vld4 qfp-44 MKE02Z64VLD4 datasheet MKE02Z64VLD4 pinout MKE02Z64VLD4 datasheet pdf MKE02Z64VLD4 equivalent MKE02Z64VLD4 replacement MKE02Z64VLD4 cross reference MKE02Z64VLD4 vs MKE02Z64VLH4 MKE02Z64VLD4 footprint MKE02Z64VLD4 application circuit NXP MKE02Z64VLD4 MKE02Z64VLD4 price

Связанные компоненты & термины

NXP Semiconductors MKE02Z64VLD4 MKE02Z64VLH4 MKE02Z64VLD4R MKE04Z128VLD4 MKE06Z128VLD4 Kinetis KE02 ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller automotive body electronics integrated analog flash memory static RAM internal FLL 31.25 kHz internal reference 1 kHz low-power oscillator 44-LQFP QFN family surface-mount package 10 mm by 10 mm package ESD protection EMC robustness motor control sensor interface
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ