MKL14Z64VFT4 - 48MHz Cortex-M0+ MCU, 64KB Flash | NXP
Артикул: MKL14Z64VFT4 ✓ АктивенMKL14Z64VFT4 Обзор
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The MKL14Z64VFT4 belongs to the Kinetis KL1 family and sits within the hierarchy of Cortex-M0+ microcontrollers, 32-bit embedded processors, integrated circuits, and semiconductors. Its low-power design and flexible operating modes are intended for portable systems that must balance responsive control, compact size, and energy efficiency.
Key features include an ARM Cortex-M0+ processor with up to 48 MHz operating frequency, 64 KB flash, a 12-bit ADC with 40 channels, and USB connectivity. The 1.71 V to 3.6 V supply range supports common 1.8 V, 2.5 V, and 3.3 V system rails. The 48-QFN 7 mm × 7 mm package provides a compact surface-mount footprint, while the exposed-pad construction supports heat dissipation when required by the board layout.
The Cortex-M0+ architecture is designed for straightforward embedded control and low-complexity instruction processing. Its operating frequency provides useful performance margin for digital control, communication, data acquisition, and user-interface tasks without requiring a higher-complexity processor. Integrated USB connectivity can simplify wired peripheral communication, while the multi-channel ADC supports applications requiring several analog inputs in a compact design.
Typical applications include USB-connected portable instruments, low-power sensor nodes, industrial monitoring modules, compact motor-control systems, and general embedded control boards. For portable products, the device's low-power orientation and multiple operating modes are useful for reducing energy use between active tasks. For industrial equipment, the 3.6 V maximum supply and compact QFN package fit space-constrained control electronics.
PCB design should route the USB interface and analog inputs carefully, keep sensitive analog and digital return currents separated, and provide local supply decoupling at the device pins. Thermal performance depends on the exposed pad, copper area, via pattern, and surrounding board construction, so those details should be evaluated together rather than treating the QFN footprint as an isolated component.
This product record combines the manufacturer's device identity and technical characteristics with practical application guidance, package considerations, lifecycle status, and an explicit distinction between verified drop-in substitutes and related Kinetis devices that use different packages. It is intended to help engineers confirm the exact MPN, footprint, electrical requirements, and replacement constraints before committing a design to production.
Аналоги без доработки для MKL14Z64VFT4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиMKL14Z64VFT4 Максимальные параметры и электрические характеристики
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | Kinetis KL1 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K × 8 bits |
| Рабочее напряжение питания | 1.71 V to 3.6 V |
| Supported Rail Voltage | 1.8 V / 2.5 V / 3.3 V |
| ADC Resolution | 12 bits |
| ADC Channels | 40 channels |
| Processor Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| USB Connectivity | Integrated USB |
| Power Profile | Ultra-low power with flexible power modes |
| Корпус | 48-QFN (7 mm × 7 mm) with exposed pad |
| Тип монтажа | Surface mount |
| Статус RoHS | Compliant |
| Статус жизненного цикла | Active |
Руководство по цоколевке MKL14Z64VFT4 в корпусе 48-qfn (7 mm × 7 mm) with exposed pad
Цоколевка для MKL14Z64VFT4 (корпус 48-qfn (7 mm × 7 mm) with exposed pad). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MKL14Z64VFT4.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MKL14Z64VFT4 подходит для 6 применениеs: USB Portable Measurement Instrument, Industrial Sensor Monitoring Node, Battery-Powered IoT Sensor Device, Compact Motor and Actuator Controller, USB-C Connected Configuration Device, Low-Power Data Acquisition Module.
USB Portable Measurement Instrument
The MKL14Z64VFT4 fits compact USB instruments because its Cortex-M0+ core runs up to 48 MHz while 64 KB of flash stores firmware, calibration logic, and USB-related routines. Integrated USB connectivity can reduce the need for a separate USB interface controller, while the 12-bit ADC and 40 analog channels support several sensor inputs. Operating from 1.71 V to 3.6 V also permits a compact regulator architecture. The 48-QFN 7 mm × 7 mm footprint saves board area, but the exposed pad and USB signal routing require careful layout to avoid insertion-loss and ground-noise problems.
Рекомендуется
Industrial Sensor Monitoring Node
The MKL14Z64VFT4 is well suited to industrial sensor monitoring because its 40-channel, 12-bit ADC can evaluate multiple analog inputs without requiring a separate multiplexer-heavy signal chain. The Cortex-M0+ core provides sufficient control capability for sensor configuration, filtering, diagnostics, and communications at up to 48 MHz, and 64 KB of flash supports embedded application code. Its 1.71 V to 3.6 V operating range supports low-voltage sensor rails. Engineers should allocate analog pins according to the datasheet, separate analog and digital return paths, and verify long-cable sensor nodes for surge and common-mode conditions.
Рекомендуется
Battery-Powered IoT Sensor Device
The MKL14Z64VFT4 supports battery-powered IoT devices that must balance responsive control with low standby consumption. NXP describes the device as an ultra-low-power Cortex-M0+ MCU with flexible power modes for portable applications, allowing firmware to spend longer periods in a reduced-activity state between sensor measurements or communications. The 48 MHz core supports timely peripheral control and the 64 KB flash provides room for protocol and application code. Actual runtime depends on the chosen mode, radio activity, sensor duty cycle, and board leakage, so engineers should validate the complete power budget rather than relying on processor frequency alone.
Рекомендуется
Compact Motor and Actuator Controller
The MKL14Z64VFT4 can serve as the supervisory controller in compact motor and actuator systems where fast deterministic control, analog feedback, and communication are needed. Its Cortex-M0+ core at up to 48 MHz can execute control loops and state-machine logic, while the 12-bit ADC can sample position, current, or temperature feedback. The 1.71 V to 3.6 V range integrates readily with low-voltage power stages. The QFN package leaves room for external drivers in compact hardware, although exposed-pad thermal performance and power-transistor switching noise must be checked at the PCB level.
Рекомендуется
USB-C Connected Configuration Device
The MKL14Z64VFT4 is suitable for a compact USB-C configuration or peripheral device that uses a 48-QFN footprint and needs local control intelligence. Integrated USB connectivity allows the MCU to participate directly in enumeration and data exchange, while the Cortex-M0+ processor handles configuration, diagnostics, and protocol state. Its 64 KB flash is useful for firmware and configuration tables, and the 1.71 V to 3.6 V range supports several low-voltage power architectures. Layout must route USB at the connector through controlled-impedance traces, with careful return-path planning and separation from analog or switching-power circuitry.
Рекомендуется
Low-Power Data Acquisition Module
The MKL14Z64VFT4 can form the core of a low-power multichannel data-acquisition module. Forty 12-bit ADC channels provide substantial analog-input capacity in one device, while the 48 MHz Cortex-M0+ core can perform sampling control, scaling, filtering, and packet preparation. With 64 KB of flash, the module can store acquisition firmware and configuration data without an external memory device. The compact 48-QFN package supports dense instrumentation, but accuracy depends on reference quality, analog grounding, input conditioning, and PCB contamination control. Engineers should evaluate gain, sampling rate, source impedance, and acquisition timing as a complete signal-chain specification.
Рекомендуется
Справочные инженерные данные для MKL14Z64VFT4 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | NXP Semiconductors |
| Package | 48-QFN (7 mm × 7 mm) with exposed pad |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Operating Voltage | 1.71 V to 3.6 V |
| ADC Resolution | 12 bits |
| ADC Channels | 40 channels |
| USB Connectivity | Integrated USB |
| Low-Power Profile | Ultra-low power with flexible power modes |
Ключевые отличия
- Integrated USB connectivity in a compact Kinetis MCU (против MKL14Z64VFM4)
- Substantial multichannel ADC integration (против MKL14Z64VLK4)
- Low-voltage operation with compact footprint (против Generic 32-bit microcontroller)
Заметки по проектированию
Treat the exposed pad as a functional thermal and electrical feature rather than an unused package area. Follow the NXP package drawing for exposed-pad dimensions, solder mask, and copper connection. Thermal performance improves with uninterrupted top-layer copper, multiple thermal vias, and adequate board area, but the acceptable via pattern must remain compatible with the assembly process. Verify the maximum operating case using the final PCB rather than a package-only estimate.
Place the MCU, decoupling capacitors, and analog-support components according to the manufacturer datasheet recommendations. Keep the USB pair tightly coupled, provide a continuous return path, and avoid routing fast digital or switching-supply edges beneath sensitive ADC inputs. The 40 available ADC channels do not imply that all pins are simultaneously usable for analog measurement; assign them only after checking the pin-description table and package-level multiplexing constraints.
Design the supply path for the complete 1.71 V to 3.6 V operating range and account for startup behavior in every mode. Place the required bypass capacitors close to their associated power pins, with the shortest possible ground return. If USB supplies or regulates part of the board, check bus-powered current limits and voltage tolerances against the MCU's operating requirements. Confirm that external peripheral transients do not pull the supply outside its specified limits.
Do not substitute a Kinetis KL14 ordering code solely because its base family name matches. Package code, pin count, exposed pad, temperature grade, memory organization, and peripheral configuration can differ across otherwise related MKL14 devices. Before replacing MKL14Z64VFT4, compare the complete NXP pin table, package drawing, electrical characteristics, and firmware pin-mapping assumptions. A footprint that appears similar is not sufficient evidence of pin-to-pin compatibility.
Информация о соответствии
RoHS compliance is identified in the product listing. Other environmental and automotive qualifications require confirmation from the exact NXP orderable-part documentation.