MKM14Z64CHH5 - 50MHz KM14 Metrology MCU, 64KB Flash | NXP
Артикул: MKM14Z64CHH5 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.56 | $75,60 |
| 100 | $6.74 | $674,00 |
| 500 | $5.92 | $2.960,00 |
| 1.000 | $5.18 | $5.180,00 |
MKM14Z64CHH5 Обзор
A metrology microcontroller is a specialized MCU that integrates a precision analog front end (AFE) with a CPU core so that energy, power, flow, and similar physical quantities can be measured, computed, and reported on a single die. Within the broader taxonomy, it sits as: metrology MCU -> microcontroller -> embedded processor -> semiconductor device. KM1x devices enable utilities and industrial OEMs to replace discrete AFE plus separate MCU architectures with a single BOM, simplifying EMI, lowering PCB area, and reducing firmware complexity.
Key features include a 24-bit sigma-delta ADC path for high-resolution voltage and current sensing, an internal precision voltage reference with low temperature drift, security features including memory protection and tamper detection, and a 50 MHz Cortex-M0+ core. The integrated high-precision analog front end supports Class 0.2 / 0.5 accuracy meters when properly calibrated. The 64 KB Flash and 16 KB SRAM are sized for typical metering stacks plus application code.
The architecture combines the energy-efficient Cortex-M0+ core with hardware metrology accelerators and a crypto/hash block for anti-tamper. The integrated 1.8V/2.5V/3.3V supply domain supports both battery-backed and line-powered meter designs. Compared with discrete AFE + MCU solutions, the KM14 reduces component count and simplifies tamper-resistant calibration by keeping the analog chain on-die.
Typical applications include single-phase residential electricity meters, three-phase industrial metering, smart energy IoT gateways, water and gas flow meters, and precision sensor front-ends. The tamper-detection and security suite make it suitable for revenue-grade meters where regulatory compliance is essential.
When designing with the KM14, plan PCB layout to isolate the analog AFE ground from the noisy digital ground, and use the recommended star-ground pattern from the NXP application note. Provide adequate decoupling on AVDD and VREF rails, and follow the datasheet calibration flow to achieve the rated metering accuracy.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical hardware-design guidance not consolidated in the manufacturer datasheet.
Аналоги без доработки для MKM14Z64CHH5 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MKM14Z64CHH5 (тот же форм-фактор и посадочное место) — отличается по Package, RoHS Status, RAM Size, ADC, Internal Voltage Reference.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MKM14Z128CHH5R
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MKM34Z256VLQ7
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MKM14Z64CHH5 Максимальные параметры и электрические характеристики
| Core Architecture | ARM Cortex-M0+ |
| Core Width | 32-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory (Flash) | 64 KB (64K x 8) |
| RAM Size | 16 KB |
| Корпус | 44-MAPLGA (5x5 mm) |
| Напряжение питания | 1.8 V / 2.5 V / 3.3 V |
| Тип монтажа | Surface Mount |
| ADC | 24-bit sigma-delta (integrated AFE) |
| Internal Voltage Reference | Yes, high-precision / low tempco |
| Security Features | Memory protection, tamper detection |
| Статус RoHS | Compliant (per distributor listings) |
Конфигурация выводов MKM14Z64CHH5
| Контакт 1 | VREFH — ADC high reference voltage |
| Контакт 2 | VREFL — ADC low reference voltage |
| Контакт 3 | AVDD — Analog supply |
| Контакт 4 | AVSS — Analog ground |
| Контакт 5 | ADC0_DP — Differential ADC positive channel |
| Контакт 6 | ADC0_DM — Differential ADC negative channel |
| Контакт 7 | ADC1_DP — Differential ADC positive channel 1 |
| Контакт 8 | ADC1_DM — Differential ADC negative channel 1 |
| Контакт 9 | VREF_OUT — Internal voltage reference output |
| Контакт 10 | VBAT — Battery supply domain |
| Контакт 11 | EXTAL — Crystal oscillator input |
| Контакт 12 | XTAL — Crystal oscillator output |
| Контакт 13 | RESET_b — Reset input (active low) |
| Контакт 14 | NMI_b — Non-maskable interrupt input |
| Контакт 15 | TMS — JTAG test mode select |
| Контакт 16 | TDI — JTAG test data in |
| Контакт 17 | TDO — JTAG test data out |
| Контакт 18 | TCK — JTAG test clock |
| Контакт 19 | PTA0 — GPIO / peripheral pin |
| Контакт 20 | PTA1 — GPIO / peripheral pin |
| Контакт 21 | PTA2 — GPIO / peripheral pin |
| Контакт 22 | PTA3 — GPIO / peripheral pin |
| Контакт 23 | PTA4 — GPIO / peripheral pin |
| Контакт 24 | PTA5 — GPIO / peripheral pin |
| Контакт 25 | PTB0 — GPIO / peripheral pin |
| Контакт 26 | PTB1 — GPIO / peripheral pin |
| Контакт 27 | PTB2 — GPIO / peripheral pin |
| Контакт 28 | PTB3 — GPIO / peripheral pin |
| Контакт 29 | PTC0 — GPIO / peripheral pin |
| Контакт 30 | PTC1 — GPIO / peripheral pin |
| Контакт 31 | PTC2 — GPIO / peripheral pin |
| Контакт 32 | PTC3 — GPIO / peripheral pin |
| Контакт 33 | PTC4 — GPIO / peripheral pin |
| Контакт 34 | PTC5 — GPIO / peripheral pin |
| Контакт 35 | PTD0 — GPIO / peripheral pin |
| Контакт 36 | PTD1 — GPIO / peripheral pin |
| Контакт 37 | PTD2 — GPIO / peripheral pin |
| Контакт 38 | PTD3 — GPIO / peripheral pin |
| Контакт 39 | UART0_TX — UART transmit |
| Контакт 40 | UART0_RX — UART receive |
| Контакт 41 | I2C_SDA — I2C data |
| Контакт 42 | I2C_SCL — I2C clock |
| Контакт 43 | VSS — Digital ground |
| Контакт 44 | VDD — Digital supply |
Типичное применение
MKM14Z64CHH5 подходит для 6 применениеs: Single-Phase Residential Electricity Meter, Three-Phase Industrial Metering, Water and Gas Flow Meter, Smart Energy IoT Gateway, Precision Sensor Front-End, Tamper-Resistant Revenue Meter.
Single-Phase Residential Electricity Meter
The MKM14Z64CHH5 is optimized for single-phase residential electricity meters where its integrated analog front end and 24-bit sigma-delta ADC path deliver Class 0.2 / 0.5 revenue-grade accuracy. With 50 MHz Cortex-M0+ compute, 64 KB Flash, and 16 KB SRAM, it has headroom for IEC 62056-21 / DLMS-style metering stacks plus tamper-detection firmware, while the on-die precision VREF with low tempco eliminates the need for an external reference and shrinks the BOM.
Рекомендуется
Three-Phase Industrial Metering
In three-phase industrial meters, the MKM14Z64CHH5's integrated AFE can be paired with external resistor dividers and CTs to sense three line voltages and currents on a single die. The 50 MHz Cortex-M0+ sustains real-time RMS and harmonic calculations needed for Class 0.5 industrial billing, while 64 KB Flash stores the metering stack plus calibration tables and 16 KB SRAM buffers instantaneous power samples at the ADC output data rate.
Рекомендуется
Water and Gas Flow Meter
For water and gas flow meters, the MKM14Z64CHH5's precision ADC path resolves low-level flow-sensor signals directly, while tamper detection and memory protection guard calibration and consumption logs against physical and firmware attacks. The low-power 1.8 V / 2.5 V operation supports battery-backed deployments with 10+ year service life, and the 64 KB Flash is sufficient for ultrasonic or turbine flow metering stacks plus secure key storage.
Рекомендуется
Smart Energy IoT Gateway
The MKM14Z64CHH5 functions as the metering and security core of a smart energy IoT gateway, where it harvests measurements from its AFE, applies tamper-resistant firmware, and exposes data to an external wireless MCU over UART or SPI. The 64 KB Flash absorbs the metering core firmware plus DLMS/COSEM libraries, while 16 KB SRAM holds cal tables and instantaneous samples, leaving room to layer additional customer-specific logic.
Рекомендуется
Precision Sensor Front-End
In precision sensor front-end designs such as weigh scales, strain gauges, and process instrumentation, the MKM14Z64CHH5's 24-bit sigma-delta path delivers sensor readout, linearization, and unit conversion without an external ADC. The integrated low-tempco VREF stabilizes gain over industrial temperature ranges, while the security block protects calibration constants, and 64 KB Flash hosts compensation tables alongside the application code.
Рекомендуется
Tamper-Resistant Revenue Meter
Where regulatory revenue metering demands anti-tamper security, the MKM14Z64CHH5 supplies hardware memory protection, tamper detection, and supplier/user data protection on a single die. The internal precision VREF keeps calibration stable across temperature and time, while the 50 MHz Cortex-M0+ runs the DLMS/COSEM stack and anomaly detection in real time, all inside the 44-MAPLGA 5x5 mm footprint that fits inside small meter enclosures.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MKM14Z64CHH5 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MKM14Z128CHH5R | MKM34Z256VLQ7 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 44-MAPLGA (5x5 mm) | 44-MAPLGA (5x5 mm) - same | 44-MAPLGA (5x5 mm) - same |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 KB | 128 KB | 256 KB |
| ADC Resolution | 24-bit sigma-delta (integrated AFE) | 24-bit sigma-delta (integrated AFE) | 24-bit sigma-delta (integrated AFE) |
Ключевые отличия
- Integrated 24-bit sigma-delta AFE with on-die precision VREF (против MKM34Z256VLQ7)
- Lowest-cost 64 KB Flash entry into the KM1x metrology family (против MKM14Z128CHH5R)
- 44-MAPLGA 5x5 mm compact meter-grade footprint (против MKM34Z256VLQ7)
Заметки по проектированию
Isolate the analog AFE ground (AVSS) from the noisy digital ground (VSS) and join them at a single star point under the exposed pad of the 44-MAPLGA package. Place 100 nF ceramic decoupling directly on AVDD and VREF_OUT pins within 2 mm trace length. Route ADC differential pairs (ADC0_DP/ADC0_DM, ADC1_DP/ADC1_DM) as length-matched 100 ohm differential pairs away from digital switching nodes to preserve the 24-bit sigma-delta dynamic range.
Use a clean low-noise LDO to feed AVDD and VREF_OUT; the on-die precision reference only delivers its rated temperature coefficient when VREF_OUT is decoupled per datasheet (typically 1uF X7R plus 100 nF). For battery-backed designs on the VBAT domain, add a slow-discharge RC so the RTC and tamper-detection logic retain state across power cycles without an external battery.
The 'CHH5' suffix denotes 44-MAPLGA 5x5 mm tray packaging; 'CHH5R' is the same device on tape-and-reel. Mixing trays and reels into a single surface-mount line will cause placement errors, so verify the exact MPN on the BOM before each build. Note that the part is marked NRND, so any new design should plan a migration to the active KM1x replacement per NXP's product selector.
Информация о соответствии
RoHS and lead-free status per NXP product page and distributor listings. Halogen-free status not stated in the verified web data and should be confirmed via manufacturer's full material declaration.
