MPC535CZP40 - 32-Bit MCU, 1MB Flash, 40MHz PowerPC | NXP
Артикул: MPC535CZP40 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $30.8 | $3.080,00 |
| 500 | $27.1 | $13.550,00 |
| 1.000 | $24.5 | $24.500,00 |
MPC535CZP40 Обзор
Background: A microcontroller (MCU) is a single-chip computer containing a CPU, embedded Flash, RAM, and a configurable peripheral set. Power Architecture MCUs are 32-bit RISC processors developed from the PowerPC specification and tailored for deterministic, real-time embedded workloads. They sit in a hierarchy: PowerPC e300 -> Power Architecture microcontroller -> 32-bit automotive MCU -> embedded computing -> semiconductor. The MPC535 family belongs to NXP's Qorivva MPC500 line, designed specifically for cost-sensitive industrial and automotive environments.
Key features include 1 MB of on-chip Flash organized as a unified code/data store, integrated dual-port TPU3 (Time Processing Unit) supporting 32 channels with 16-bit resolution and microsecond event scheduling, a peripheral-rich subsystem including CAN 2.0B, J1850, and FlexCAN interfaces, plus a 388-pin plastic BGA with an extended -40 to +85 degC temperature envelope. The device supports 5 V-tolerant I/O with 2.6 V core, easing mixed-voltage designs. This combination distinguishes the MPC535 from generic 32-bit MCUs in noise immunity and analog robustness.
Architecturally, the e300 core implements branch prediction, separate instruction and data MMU-less caches, and is paired with the USIU (Universal Serial Interface Unit) for clock and reset management. The CMF-A and CMF-B Flash modules with shadow block capability enable in-field reprogramming, while the integrated DPTRAM supports double-precision arithmetic emulation. Hardware CRC and ECC engines improve data integrity for safety-critical firmware.
Typical applications include engine management ECUs, transmission controllers, body control modules, hydraulic and braking subsystems, industrial PLC fronts, and ruggedized sensor hubs that must survive temperature swings and electrical transients.
Design tip: keep the MPC535CZP40's ball-grid footprint on a 0.8 mm-or-larger pitch to ease inspection; pair the dual TPU3 channels with external MOSFET drivers rather than driving solenoids directly. Plan for a watchdog-enabled supervisor IC, as on-board WDT behavior alone is insufficient for ASIL targets.
This page synthesizes distributor pricing, drop-in alternatives, and design considerations tailored to designers evaluating the MPC535CZP40 in automotive or industrial contexts.
Аналоги без доработки для MPC535CZP40 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC535CZP40 (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Operating Temperature, Peripherals, Mounting Type, Package / Case.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиMPC535CZP40 Максимальные параметры и электрические характеристики
| Core Architecture | PowerPC e300 RISC |
| CPU Core Count | 1 |
| Разрядность шины данных | 32-bit |
| Maximum CPU Clock | 40 MHz |
| Program Memory Size (Flash) | 1 MB (1M x 8) |
| Напряжение питания | 2.6 V / 5 V dual-rail capable |
| Рабочая температура | -40 C to +85 C |
| Automotive Qualification | AEC-Q100 |
| Package Type | 388-BGA (Plastic Ball Grid Array) |
| Package Dimensions | 27 mm x 27 mm |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 |
| Peak Reflow Temperature | 240 C (max 30 s) |
| I/O Voltage Tolerance | 5 V tolerant |
| Interface Support | CAN 2.0B, J1850, TPU3 |
Руководство по цоколевке MPC535CZP40 в корпусе 27 mm x 27 mm
Цоколевка для MPC535CZP40 (корпус 27 mm x 27 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC535CZP40.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC535CZP40 подходит для 6 применениеs: Engine Management ECU, Transmission Control Module, Body Control Module (BCM), Industrial PLC Front-End, Hydraulic Brake / Chassis Controller, Power Steering Sensor Hub.
Engine Management ECU
The MPC535CZP40 fits engine management ECUs because its e300 core deterministically handles injectors, knock detection, and crank-position capture in < 100 us. Its 5 V I/O tolerates analog sensor stacks with minimal external conditioning. The 1 MB Flash stores calibration tables at 100+ cell points per cylinder. Integrated CAN 2.0B and TouCAN interface links cleanly to the vehicle CAN bus without glue logic, and the -40 to +85 C thermal envelope covers under-hood temperatures when paired with AEC-Q100 sourcing. AEC-Q100 grading helps satisfy OEM quality requirements for short-flow PPAP documentation.
Рекомендуется
Transmission Control Module
Transmission control modules leverage the MPC535CZP40's dual TPU3 channels (32 total with 16-bit resolution) to schedule shift solenoids and PWM with microsecond accuracy. The 1 MB Flash maps the shift map, torque management, and adaptive learning coefficients. The device supports external EEPROM/FlexRay companion buses via unused address lines. Designers value the deterministic interrupt latency (< 200 ns typical) for clutch slip regulation. The 5 V-tolerant I/O simplifies direct connection to analog pressure sensors and pulse generators found in automatic transmissions.
Рекомендуется
Body Control Module (BCM)
In body control modules the MPC535CZP40 drives lighting, door mirrors, wiper logic, and central locking via its rich GPIO and peripheral mix. The 5 V-tolerant I/O bridges to 12 V motors via discrete high-side drivers; the 388-ball BGA exposes sufficient GPIO for body-domain loads. CMF-A and CMF-B shadowed Flash allows over-the-air feature updates with rollback support. AEC-Q100 qualification supports OEM sourcing requirements across multiple product lines.
Рекомендуется
Industrial PLC Front-End
The MPC535CZP40's deterministic PowerPC core and dual 16-bit TPU3 units make it a strong fit as an industrial PLC front-end controller, replacing legacy 8/16-bit PLC MCUs when faster scan times are required (< 500 us). The 1 MB Flash stores ladder-logic equivalents and PID loops, while hardware CAN 2.0B interfaces with field networks. Pin-compatibility within NXP's MPC500 family means designs can scale between MPC561CVR40 and MPC562MZP56 without board rework when scaling throughput.
Рекомендуется
Hydraulic Brake / Chassis Controller
Safety-critical chassis and brake-by-wire controllers use the MPC535CZP40 because its e300 core offers lock-step operation support through the USIU and redundant TPU3 channels. Hardware CRC units on FlexCAN and dual Flash banks (CMF-A + CMF-B) enable ASIL B/C validation. The 5 V-tolerant I/O and wide -40 to +85 C envelope sustain under-chassis conditions. Firmware can run fail-operational logic across the two Flash partitions with external watchdog supervision.
Рекомендуется
Power Steering Sensor Hub
Electric power steering sensor hubs require real-time processing of torque, angle, and motor-current feedback, which the MPC535CZP40 delivers via the e300 core running periodic sensing loops under 1 ms. The 5 V analog front-end and dual TPU3 simplify PWM generation for torque-assist motors. Designers often link the MCU to a CAN-FD companion with the same MPC500 footprint, benefiting from NXP's BOM reuse across vehicle platforms. AEC-Q100 sourcing keeps MCU qualification manageable at the vehicle level.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC535CZP40 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC561CVR40 | MPC562MZP56 | MPC563MZP56 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 388-PBGA (27x27) | 388-PBGA (27x27) - same | 388-PBGA (27x27) - same | 388-PBGA (27x27) - same |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 56 MHz (+40%) | 56 MHz (+40%) |
| Flash Memory | 1 MB | 512 KB (-50%) | 2 MB (+100%) | 3 MB (+200%) |
| RAM | 28 KB | 24 KB | 48 KB | 64 KB |
| Automotive Grade | AEC-Q100 | AEC-Q100 | AEC-Q100 | AEC-Q100 |
| CAN Controllers | TouCAN (1) | TouCAN (1) | TouCAN (2) | FlexCAN + TouCAN |
| TPU3 Channels | 32 | 32 | 32 | 32 |
Ключевые отличия
- Wider AEC-Q100 Flash budget for calibration tables (против MPC561CVR40)
- Integrated TouCAN and J1850 stack (против MPC562MZP56)
- Lower clock speed than updated MPC5xx siblings (против MPC562MZP56)
Заметки по проектированию
Estimated: based on typical MPC535 supply current figures in the NXP datasheet, the device draws ~120 mA core + ~80 mA I/O at 40 MHz with full TPU3 utilization. Decoupling must include a 100 nF X7R per VDD supply pin plus a 4.7 uF bulk cap at the package entry. Designers should plan for ~150 mA budget and provide a 3.3V/2.6V LDO with 250 mA headroom.
The 27x27 mm PBGA exposes a thermal pad with typical theta_JA around 15 C/W on a 4-layer PCB. For continuous 80 degC ambient with full peripheral utilization, expect 15 C rise; add thermal vias and top copper pour to keep junction < 125 degC under AEC-Q100 derating rules.
Route the e300 trace impedance at 50 ohm single-ended, with matched-length MPIO, ADC, and TPU3 traces. Place 0.1 uF X7R caps within 3 mm of each power pin. Use a 27 mm x 27 mm footprint with 0.8 mm ball pitch - follow NXP's reference PCB land pattern when migrating to MPC561/MPC562 variants in the same 388-pin BGA.
Do not enable TPU3 channels without proper initialization or the channel will latch. Use the NXP-supplied TPU3 function library rather than rolling custom microcode on first revision designs. Plan a backup baud-rate for CAN traffic; mid-program baud changes risk silent bus errors on locked receivers.
Информация о соответствии
Per datasheets.com and Partstack: lead-finish legacy inventory with JESD-609 code e0 (SnPb), MSL 3, peak reflow 240 C. RoHS status: 'No' on vintage stock; newer NXP supply may carry Pb-free variants - confirm with distributor at order. AEC-Q100 automotive qualified per Mouser listing.
