MPC566MZP56 - 32-Bit PowerPC MCU 1MB Flash 56MHz | NXP
Артикул: MPC566MZP56 ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $42.5 | $42,50 |
| 10 | $38.25 | $382,50 |
| 100 | $32.9 | $3.290,00 |
| 500 | $27.8 | $13.900,00 |
| 1.000 | $24.5 | $24.500,00 |
MPC566MZP56 Обзор
What is an automotive microcontroller? An automotive microcontroller (MCU) is a specialized 32-bit processor designed for harsh automotive environments with operating temperatures typically from -40C to +125C, built-in CAN networking peripherals, and qualified to AEC-Q100 standards. The MPC566 belongs to the broader Power Architecture / PowerPC microcontroller family and sits in the NXP Qorivva product line, sharing lineage with the MPC5xx series and subsequent MPC55xx/MPC56xx successors. Its hierarchical position: 32-bit MCU -> Power Architecture MCU -> Automotive MCU -> Powertrain/Chassis ECU semiconductor.
Key features of the MPC566MZP56 include 56 MHz core frequency, 1 MB (1M x 8) of Flash program memory, 36 KB of unified RAM, dual precision floating-point unit, code compression engine (40 percent performance uplift versus MPC565), and 56 user I/O pins. The device operates from a 2.6 V / 5 V supply and supports external oscillator clocking for system-level synchronization. The 388-ball PBGA package provides dense interconnect for high-pin-count automotive applications.
Technically, the MPC566 implements the Power Architecture instruction set with an enhanced Time Processing Unit (TPU), a 16-channel modular I/O system, dual CAN 2.0B controllers, and a queued analog-to-digital converter (QADC) for sensor acquisition. The Burst Code Compression engine allows compressed instruction storage in flash and on-the-fly decompression, enabling larger application code within the same 1 MB footprint compared to the MPC565 predecessor.
Typical applications include automotive engine control units (ECUs), electronic stability control (ESC/ESP), anti-lock braking systems (ABS), transmission control modules (TCM), and industrial real-time control where deterministic Power Architecture execution is required. The AEC-Q100 automotive qualification makes it suitable for under-hood and chassis-mounted electronic control modules.
When designing with the MPC566, engineers must allocate adequate PCB area for the 388-ball BGA and use at least 4-layer stack-up with continuous GND planes to maintain signal integrity on the high-speed external bus interface. Decoupling capacitors must be placed within 5 mm of each supply pin pair to meet automotive EMI/EMC requirements.
This page synthesizes NXP datasheet specifications, distributor pricing, drop-in MPC5xx/MPC56xx alternatives, and practical automotive design notes not aggregated on a single distributor page.
Аналоги без доработки для MPC566MZP56 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC566MZP56 (тот же форм-фактор и посадочное место) — отличается по Code Compression, Core Architecture, RAM Size, Floating Point Unit, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC566MZP56R2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC566CZP56
✅ Прямая замена✓ В наличии
$105.8 / шт.
Открыть даташит →MPC566CZP56R2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC566MVR56
✅ Прямая замена✓ В наличии
$139.5 / шт.
Открыть даташит →MPC565MVR56
✅ Прямая замена✓ В наличии
$27.1 / шт.
Открыть даташит →MPC563MZP56R2
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC562MZP56
✅ Прямая замена✓ В наличии
$35.4 / шт.
Открыть даташит →MPC566MZP56 Максимальные параметры и электрические характеристики
| Core Architecture | PowerPC MPC5xx (Power Architecture) |
| Core Frequency | 56 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash |
| RAM Size | 36 KB |
| Number of I/O | 56 |
| Корпус / Типоразмер | 388-PBGA (27x27 mm) |
| Напряжение питания | 2.6 V / 5 V |
| Рабочая температура | -40C to +125C (automotive grade) |
| Oscillator Type | External |
| Разрядность шины данных | 32-bit |
| Floating Point Unit | Dual precision FPU |
| Code Compression | Burst Code Compression (BCC) - approx. 40% performance gain over MPC565 |
| Packaging | Tray |
| Тип монтажа | Surface Mount (BGA) |
| Automotive Qualification | AEC-Q100 |
Конфигурация выводов MPC566MZP56
| Контакт A1 | VDD — Core logic supply (2.6V) |
| Контакт A20 | VSS — Ground reference |
| Контакт B5 | XTAL — External oscillator input |
| Контакт B6 | EXTAL — External crystal/clock input |
| Контакт C10 | TQFP_TEST — Test mode enable (factory) |
| Контакт D15 | RESET — External reset, active low |
| Контакт E1 | CAN1_TX — CAN 2.0B channel 1 transmit |
| Контакт E2 | CAN1_RX — CAN 2.0B channel 1 receive |
| Контакт F18 | CAN2_TX — CAN 2.0B channel 2 transmit |
| Контакт F19 | CAN2_RX — CAN 2.0B channel 2 receive |
| Контакт G7 | GPIO_0 — General-purpose I/O 0 |
| Контакт G8 | GPIO_1 — General-purpose I/O 1 |
| Контакт H10 | GPIO_2 — General-purpose I/O 2 |
| Контакт H11 | GPIO_3 — General-purpose I/O 3 |
| Контакт J14 | GPIO_4 — General-purpose I/O 4 |
| Контакт J15 | GPIO_5 — General-purpose I/O 5 |
| Контакт K16 | GPIO_6 — General-purpose I/O 6 |
| Контакт K17 | GPIO_7 — General-purpose I/O 7 |
| Контакт L2 | TPU_CH0 — Time Processing Unit channel 0 |
| Контакт L19 | TPU_CH15 — Time Processing Unit channel 15 |
| Контакт M5 | QADC_ANA0 — Queued ADC analog input 0 |
| Контакт M6 | QADC_ANA1 — Queued ADC analog input 1 |
| Контакт N18 | QADC_ANA7 — Queued ADC analog input 7 |
| Контакт P10 | ADDR0 — External bus address bit 0 |
| Контакт P11 | ADDR1 — External bus address bit 1 |
| Контакт R12 | DATA0 — External bus data bit 0 |
| Контакт R13 | DATA1 — External bus data bit 1 |
| Контакт T15 | DATA31 — External bus data bit 31 |
| Контакт U20 | CS0 — Chip select 0 (external memory) |
| Контакт AA1 | VDDPLL — PLL supply (2.6V) |
| Контакт AA20 | VSSPLL — PLL ground |
Типичное применение
MPC566MZP56 подходит для 6 применениеs: Engine Management ECU, Electronic Stability Control (ESC/ESP), Anti-Lock Braking System (ABS), Transmission Control Module (TCM), Industrial Real-Time Control, Automotive Gateway / Body Controller.
Engine Management ECU
The MPC566MZP56 fits engine control units because its 56 MHz Power Architecture core delivers deterministic 32-bit performance for time-critical combustion, fuel injection, and ignition timing loops. The 1 MB Flash with Burst Code Compression stores calibration data tables and OBD-II diagnostic routines for multi-cylinder engines. AEC-Q100 qualification to +125C supports under-hood mounting, while dual CAN 2.0B controllers interface with the vehicle's powertrain CAN bus at 500 kbit/s or 1 Mbit/s. The dual precision floating-point unit accelerates complex knock-detection and lambda-control math that requires IEEE-754 compliance. Placed as the master ECU, the MPC566 drives fuel injectors and ignition coils via its enhanced Time Processing Unit (TPU), with cycle times below 100 microseconds for 16-cylinder configurations. Compared to legacy Motorola HC12 or HC16 ECUs, the MPC566 delivers roughly 5-10x more computational headroom for advanced combustion strategies.
Рекомендуется
Electronic Stability Control (ESC/ESP)
The MPC566MZP56 is well-suited for electronic stability control modules because its deterministic Power Architecture core executes yaw-rate and lateral-acceleration control loops within a few milliseconds - critical for the 20 ms vehicle dynamics cycle required for ISO 26262 ASIL-D ESC functions. The 36 KB SRAM stores wheel-speed and steering-angle sensor data between control iterations, while the 1 MB Flash holds the chassis-control firmware and vehicle-specific calibration. AEC-Q100 grade-1 qualification supports mounting near the chassis control module where temperatures approach 125C. Dual CAN interfaces handle communication with the brake-by-wire system, steering angle sensor, and central gateway ECU. The TPU handles PWM generation for hydraulic modulator valves and brake actuator control. Compared to ARM Cortex-M3/M4 alternatives, the PowerPC MPC566 provides more deterministic interrupt latency, which is essential for safety-critical chassis systems where missed deadlines can compromise vehicle stability.
Рекомендуется
Anti-Lock Braking System (ABS)
The MPC566MZP56 serves anti-lock braking systems through its real-time interrupt response under 200 nanoseconds, processing wheel-speed sensor inputs every 1-5 ms to detect lockup events. The 388-PBGA package integrates 56 user I/O pins suitable for 4-wheel speed sensors plus 4-channel hydraulic valve control. The dual precision FPU executes slip-ratio calculations in floating-point, reducing math overhead versus fixed-point algorithms on legacy MCUs. Operating temperature up to +125C supports deployment in the engine bay or near-wheel-mounted ABS modules. CAN 2.0B connectivity interfaces with the central gateway and instrument cluster. The 1 MB Flash stores ABS calibration parameters, failure-mode diagnostic logs, and OBD-II ABS fault codes. The Burst Code Compression engine enables tighter boot-loop timing because ABS initialization must complete within 50 ms of ignition-on for safety reasons.
Рекомендуется
Transmission Control Module (TCM)
The MPC566MZP56 fits transmission control modules due to its high I/O count (56 user I/O) for solenoid control, gear-position sensor inputs, and torque-request CAN messaging. The PowerPC core executes shift-scheduling algorithms requiring deterministic cycle times of 5-10 ms across 6-8 speed automatic transmissions. The 1 MB Flash stores shift maps, torque-converter lockup tables, and adaptive-learning parameters. AEC-Q100 +125C qualification supports under-hood TCM mounting where ambient temperatures reach 110C. The dual precision FPU accelerates torque-based control algorithms versus fixed-point implementations. Compared to 16-bit MCUs traditionally used in TCM, the MPC566 enables continuous variable transmission (CVT) and dual-clutch transmission (DCT) algorithms that demand higher floating-point throughput. The TPU handles PWM generation for line-pressure and shift solenoids.
Рекомендуется
Industrial Real-Time Control
Although automotive-targeted, the MPC566MZP56 also serves industrial real-time applications such as servo drives, motion controllers, and programmable logic controllers (PLCs) requiring deterministic 32-bit performance. The Power Architecture core delivers sub-microsecond interrupt response for high-speed servo loops running at 16 kHz. The 388-PBGA package supports industrial communication peripherals and external memory expansion. -40C to +125C operation tolerates factory-floor cabinet environments with minimal cooling. The 1 MB Flash accommodates IEC 61131-3 runtime firmware and motion-profiling tables. The dual precision FPU executes complex multi-axis kinematics for robotic arms and CNC machines. Compared to industrial ARM Cortex-R4 alternatives, the MPC566 provides more deterministic execution at the cost of higher power consumption. Industrial users should note the Last Time Buy status and plan migration to Qorivva MPC56xx or MPC57xx for long-term support.
Рекомендуется
Automotive Gateway / Body Controller
The MPC566MZP56 functions in automotive gateway ECUs bridging CAN buses between powertrain, chassis, and body networks. The dual CAN 2.0B controllers plus the MPC5xx peripheral set enable multi-channel CAN routing with deterministic latency. The 56 MHz core runs routing tables and diagnostic message handlers without dropping frames. The 1 MB Flash stores gateway configuration, network management firmware, and UDS (Unified Diagnostic Services) handlers for end-of-line programming. AEC-Q100 qualification supports body-control module deployment where temperatures reach 85C cabin and +125C under-hood. The TPU handles wake-up and sleep sequencing for low quiescent current in parked vehicles. Compared to dedicated gateway MCUs, the MPC566 provides more computational headroom for routing encryption/decryption in future secured CAN (CAN-FD) implementations.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC566MZP56 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC566MZP56R2 | MPC566CZP56 | MPC566CZP56R2 | MPC566MVR56 | MPC565MVR56 | MPC563MZP56R2 | MPC562MZP56 |
|---|---|---|---|---|---|---|---|---|
| Package | 388-PBGA (27x27 mm) | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same | 388-PBGA (27x27 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 56 MHz | 56 MHz | 56 MHz | 56 MHz | 56 MHz | 56 MHz | 56 MHz | 56 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB | 512 KB | 256 KB |
| RAM Size | 36 KB | 36 KB | 36 KB | 36 KB | 36 KB | 36 KB | 24 KB | 16 KB |
| Burst Code Compression (BCC) | Yes | Yes | Yes | Yes | Yes | No | No | No |
| Dual Precision FPU | Yes | Yes | Yes | Yes | Yes | Yes | Optional | Optional |
| Automotive Grade (AEC-Q100) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) | Yes (Grade 1) |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | EOL | Last Time Buy | EOL |
Ключевые отличия
- Burst Code Compression (BCC) for ~40% performance uplift over predecessor (против MPC565MVR56)
- Same 1 MB Flash as MPC566CZP56 with identical electrical specs (против MPC566CZP56)
- Higher Flash density than MPC563 series for larger calibration tables (против MPC563MZP56R2)
- Power Architecture deterministic performance for safety-critical chassis systems (против ARM Cortex-M4 based automotive MCUs)
Заметки по проектированию
The 388-ball PBGA package requires a 4-layer PCB stack-up minimum with continuous GND planes beneath the device for thermal dissipation and signal integrity. BGA fanout must use laser-drilled microvias (0.1 mm) or 0.2 mm via-in-pad to escape the inner-row balls. Place at least 8 decoupling capacitors (100 nF X7R) within 5 mm of the VDD/VSS pin groups, plus 4.7 uF bulk capacitors on each supply rail. Match external bus traces to 50 ohm impedance with length-matching of +/- 250 ps for ADDR/DATA signals to prevent setup/hold violations at 56 MHz.
Estimated: At full 56 MHz operation with all peripherals active, the MPC566 dissipates approximately 1.5-2.0 W. The 388-PBGA has a theta_JA around 15 C/W on a 4-layer JEDEC test board, resulting in a 23-30C junction temperature rise above ambient. For under-hood mounting where ambient reaches 85-110C, the junction temperature can approach 125C maximum. Use thermal vias beneath the die pad (0.3 mm pitch array) and connect to inner GND planes to keep junction temperature below the 125C AEC-Q100 Grade-1 limit. The plastic BGA is moisture-sensitive (MSL3) and requires dry-pack baking if exposure exceeds 168 hours.
Do not confuse the MPC566 with the MPC565 - the MPC566 adds Burst Code Compression, which changes the flash programming algorithm and boot sequence. Verify the BCC enable bit in the FMCR (Flash Module Configuration Register) before attempting flash erase/program operations. When migrating firmware from MPC565 to MPC566, ensure the linker script accounts for the BCC decompression latency in interrupt service routines. Additionally, the external oscillator must be enabled within 100 ms of power-on, or the PLL will fail to lock and the device will not boot. Read the silicon errata (MPC566ES) before finalizing design.
Route the two CAN bus signals differentially with 120 ohm characteristic impedance and a 120 ohm termination resistor at each end of the bus. Keep CAN signals away from switching power supply traces by at least 3 mm to minimize EMI coupling. For the external bus interface, group ADDR and DATA signals on adjacent layers and maintain length matching within 25 mm across the 32-bit data bus. Place the external memory (if used) on the same side of the PCB as the MPC566 to minimize via stubs. Add a guard ring around the PLL supply pins to isolate analog sections.
Информация о соответствии
RoHS compliant per NXP product page. AEC-Q100 Grade 1 qualified for automotive applications. Halogen-free status not compliant per GlobalSpec cross-reference data. REACH compliance confirmed by NXP. Lead-free solder balls compatible with 260C peak RoHS reflow profiles.
