MPC8343CVRADDB - PowerQUICC II Pro SoC, 266MHz, 620-BGA | NXP
Артикул: MPC8343CVRADDB ✗ Снят с производстваMPC8343CVRADDB Обзор
A PowerQUICC II Pro processor is an integrated communications processor that combines a Power Architecture (PowerPC) CPU core with on-chip peripheral controllers. It belongs to the MPU (microprocessor unit) category and sits in the broader SoC taxonomy as a system-on-chip for embedded networking and storage applications. The MPC8343E family extended the earlier PowerQUICC II line by adding faster DDR memory support and dual-gigabit Ethernet, enabling wire-speed routing, NAS, and RAID system designs without external bridge chips.
Key features include a 266 MHz e300 core, dual 10/100/1000 Mbps Ethernet controllers with QoS, dual PCI 2.3 buses, USB 2.0 Hi-Speed host/device, DDR1/DDR2 memory controller with ECC, and integrated security engines (the “E” variant includes encryption acceleration). The 620-HBGA package exposes extensive GPIO and high-speed serial interfaces, allowing direct connection to external PHYs, DIMM sockets, and expansion buses without glue logic.
The architecture pairs the e300 superscalar core with a dedicated communications processor module (CPM), allowing protocol handling to run independently of application code. This dual-engine topology is the technical foundation behind PowerQUICC’s long-standing role in routers, DSLAMs, and RAID controllers where deterministic packet throughput is required alongside general-purpose Linux or VxWorks processing.
Typical applications include wired routers and gateways, RAID storage controllers, industrial control PCs, factory automation controllers, and networked printers. The wide peripheral set also makes the MPC8343 suitable for medical imaging gateways and defense/aerospace embedded subsystems that require long-lifecycle silicon and wide-temperature operation.
When designing with this device, allocate PCB area for the 29x29 mm BGA and plan a 6-to-8 layer stack-up with microvia or via-in-pad technology to fan out all 620 balls. Thermal management is required because the SoC can dissipate several watts under full peripheral load.
This page synthesizes NXP product information, distributor stock status, drop-in compatible PowerQUICC variants, and design considerations that go beyond the manufacturer datasheet, helping engineers evaluate replacement risk and second-source options.
Аналоги без доработки для MPC8343CVRADDB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8343CVRADDB (тот же форм-фактор и посадочное место) — отличается по Ethernet, USB, Memory Controller, Operating Temperature, Core Architecture.
Для этого товара нет аналогов без доработки.
Запросить аналогиMPC8343CVRADDB Максимальные параметры и электрические характеристики
| Core Architecture | PowerPC e300 (Power Architecture) |
| Family | PowerQUICC II Pro (MPC8343E) |
| Разрядность шины данных | 32-bit |
| Core Frequency | 266 MHz |
| Supply Voltage (Core) | 1.2 V |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| Package Type | 620-HBGA (29x29 mm, 1 mm pitch) |
| Число выводов | 620 |
| Рабочая температура | -40C to +105C |
| Memory Controller | DDR1 / DDR2 with ECC |
| Ethernet | Dual 10/100/1000 Mbps (GMII/RGMII/TBI) |
| PCI | Dual PCI 2.3 |
| USB | USB 2.0 Hi-Speed (Host/Device) |
| Process Technology | 0.13 um CMOS |
| Lead Free / RoHS | Yes (lead-free BGA) |
| Тип монтажа | Surface Mount (BGA) |
| Security Engine | Yes (MPC8343E variant - encryption acceleration) |
Руководство по цоколевке MPC8343CVRADDB в корпусе 620-hbga (29x29 mm, 1 mm pitch)
Цоколевка для MPC8343CVRADDB (корпус 620-hbga (29x29 mm, 1 mm pitch)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8343CVRADDB.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8343CVRADDB подходит для 6 применениеs: Enterprise Router / Gateway, RAID Storage Controller, Industrial PC / Factory Automation, Networked Printer / MFP Controller, Medical Imaging Gateway, Aerospace / Defense Embedded Subsystem.
Enterprise Router / Gateway
The MPC8343CVRADDB is well matched to enterprise router and gateway designs because the dual Gigabit Ethernet controllers support wire-speed L2/L3 forwarding while the e300 core runs control-plane routing daemons (Quagga, FRR). The PCI 2.3 bus can attach crypto accelerators or additional WAN cards, and the DDR1/DDR2 controller with ECC supplies the routing table bandwidth. Operating from -40C to +105C, the part fits both climate-controlled wiring closets and outdoor enclosures.
Рекомендуется
RAID Storage Controller
In RAID controller cards the MPC8343CVRADDB serves as the main SoC, using its PCI 2.3 interface to upstream into a host system and its dual GbE to expose iSCSI or NAS targets. The integrated DDR2 controller with ECC handles read/write caching for tens of spindles without external memory controller glue. The wide peripheral set eliminates the need for a separate I/O controller, and the -40C to +105C temperature range supports dense 1U/2U server chassis where ambient can exceed 60C.
Рекомендуется
Industrial PC / Factory Automation
Factory automation controllers benefit from the MPC8343CVRADDB’s industrial -40C to +105C temperature range, deterministic CPM interrupt handling, and PCI/USB peripheral options. The USB 2.0 Hi-Speed controller handles HMI touchscreens and programming cables, while the PCI bus connects fieldbus cards (Profibus, CAN). The SoC’s long-lifecycle status (NXP extended longevity) makes it attractive for 10-15 year industrial product cycles.
Рекомендуется
Networked Printer / MFP Controller
The MPC8343CVRADDB fits networked printer and multifunction printer (MFP) engines by hosting the print pipeline on the e300 core while the dual GbE ports provide gigabit network connectivity. The USB 2.0 Hi-Speed controller supports direct-print from USB drives and scanner-to-host transfer. DDR2 with ECC caches high-resolution raster image data at engine speeds, and the industrial temperature range handles the heat inside a printer chassis.
Рекомендуется
Medical Imaging Gateway
The MPC8343CVRADDB serves as a DICOM imaging gateway where the e300 core runs the DICOM stack and the dual GbE links the modality (CT/MRI) to the hospital PACS network. ECC-protected DDR2 ensures image-data integrity, critical for medical compliance. The extended -40C to +105C temperature range suits hospital equipment rooms and mobile imaging carts. Long-term NXP silicon availability matches the 7-10 year medical device lifecycle.
Рекомендуется
Aerospace / Defense Embedded Subsystem
Defense and aerospace embedded subsystems leverage the MPC8343CVRADDB’s wide -40C to +105C operating range, ECC memory for fault tolerance, and long-lifecycle silicon supply. The dual PCI and dual GbE interfaces connect mission computers to avionics buses and ground-station networks. Hardware encryption acceleration on the E variant supports secure datalinks. The SoC’s pedigree in industrial and military communication routers makes it a low-risk choice for retrofit programs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8343CVRADDB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8347CVRADDB | MPC8343ECVRADDB | MPC8343VRADDB | MPC8343EZQAGDDB | MPC8347ECVRADDB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 620-HBGA (29x29 mm) | 620-HBGA (29x29 mm) - same | 620-HBGA (29x29 mm) - same | 620-HBGA (29x29 mm) - same | 620-HBGA (29x29 mm) - same | 620-HBGA (29x29 mm) - same |
| Core Frequency | 266 MHz | 266 MHz | 266 MHz | 266 MHz | 400 MHz | 266 MHz |
| Ethernet Ports | 2x Gigabit | 3x Gigabit | 2x Gigabit | 2x Gigabit | 2x Gigabit | 3x Gigabit |
| Encryption Engine | Yes (MPC8343E variant) | Yes (E variant) | Yes | No | Yes | Yes |
| DDR Memory Support | DDR1 / DDR2 with ECC | DDR1 / DDR2 with ECC | DDR1 / DDR2 with ECC | DDR1 / DDR2 with ECC | DDR1 / DDR2 with ECC | DDR1 / DDR2 with ECC |
| PCI | Dual PCI 2.3 | Dual PCI 2.3 | Dual PCI 2.3 | Dual PCI 2.3 | Dual PCI 2.3 | Dual PCI 2.3 |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Lifecycle Status | End-of-Life | End-of-Life | End-of-Life | End-of-Life | Active (likely) | End-of-Life |
Ключевые отличия
- Drop-in pin-compatible within the MPC83xx 620-BGA family (против MPC8347CVRADDB)
- Industrial -40C to +105C temperature range (против MPC8343EZQAGDDB)
- Encryption engine enabled (MPC8343E variant) (против MPC8343VRADDB)
Заметки по проектированию
The 620-HBGA at 1 mm pitch requires a 6-to-8 layer PCB stack-up with 0.5 oz copper on outer layers and microvia or via-in-pad technology for clean fan-out of all balls. Place 8-10 GND balls directly under the package and stitch them with a continuous ground plane to minimize return-path impedance. Reference the NXP AN3660 layout application note for recommended stack-up.
Estimated: at 266 MHz with dual GbE, PCI, and USB active, the MPC8343 typically dissipates 2.5-3.5 W. With a 620-BGA theta_JA around 15-20 C/W on a 4-layer JEDEC board, junction-to-ambient rise can exceed 70C at 105C ambient. Add a 25x25 mm copper pad on the top layer directly under the BGA, and provide airflow of 1-2 m/s for industrial -40C to +105C operation.
Do not assume the 'C' in MPC8343CVRADDB and the 'E' in MPC8343ECVRADDB refer to the same silicon - the 'E' suffix explicitly enables the security/encryption engine. Verify BSP compatibility when migrating between non-E and E variants. Also note the part has reached end-of-life per NXP's discontinuance notice, so plan last-time-buy quantities for long-life products.
Информация о соответствии
Lead-free BGA package confirmed by DigiKey and NXP product page. RoHS compliance inferred from lead-free designation. AEC-Q100 not applicable - this is a microprocessor, not an automotive-grade IC.
