MPC8536CVTAKGA - PowerPC e500 600MHz MPU 783-FCBGA | NXP
Артикул: MPC8536CVTAKGA ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $165 | $165,00 |
| 10 | $152 | $1.520,00 |
| 100 | $138.5 | $13.850,00 |
| 500 | $125.75 | $62.875,00 |
| 1.000 | $112 | $112.000,00 |
MPC8536CVTAKGA Обзор
A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computing system, integrating the control logic, registers, arithmetic logic unit, cache memory, and external bus interfaces on a single die. MPC85xx MPUs sit at the top of the embedded processing hierarchy (microprocessor -> embedded processor -> SoC -> semiconductor), targeting communications infrastructure where deterministic performance, integrated peripherals, and long-term reliability outweigh the absolute clock speed of application processors. The e500 core implements the Power Architecture Book E instruction set with a 32-bit datapath and hardware MMU.
Key features of the MPC8536CVTAKGA include a 600MHz e500 core speed, 1V core voltage operation, dual Gigabit Ethernet controllers, integrated security acceleration, DDR2/DDR3 SDRAM memory controller with ECC, four DMA controllers, and the high-speed local bus plus PCI Express interfaces typical of the MPC85xx family. The device supports hardware virtualization and runs at extended temperature ranges suitable for industrial and communications equipment.
Architecturally, the MPC8536 integrates the e500 core with platform-level blocks including the CoreNet fabric, queue manager, buffer manager, and RapidIO or PCIe serial interfaces. This heterogeneous integration lets the part replace an MPU plus several companion chips in routing, switching, and gateway designs. Built on a 65nm CMOS process, it balances leakage and dynamic power to fit fan-less or low-airflow industrial chassis.
Typical applications include wired networking routers and switches, network-attached storage controllers, industrial gateways, telecom line cards, secure VPN appliances, and embedded control planes where deterministic interrupt latency and integrated peripherals matter more than raw CPU frequency.
When designing with this part, plan thermal management around the 29x29mm FCBGA - a multi-layer board with stitched via arrays under the die is mandatory to meet the package thermal resistance. Validate signal integrity on DDR2/DDR3 traces to the controller and apply impedance-controlled routing for SerDes lanes.
This page synthesizes distributor pricing, same-brand family variants, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для MPC8536CVTAKGA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8536CVTAKGA (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Operating Temperature, Mounting Type, Memory Controller, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC8536BVTAKGA
✅ Прямая замена✓ В наличии
$125 / шт.
Открыть даташит →MPC8536CVTALGA
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MPC8536EAVTAULA
✅ Прямая замена✓ В наличии
$115.6 / шт.
Открыть даташит →MPC8536EAVTANGA
✅ Прямая замена✓ В наличии
$84.75 / шт.
Открыть даташит →MPC8536CVTANG
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC8536CVTAKGA Максимальные параметры и электрические характеристики
| Processor Type | MPC85xx PowerQUICC III MPU |
| Core Architecture | PowerPC e500 (32-bit, Book E) |
| Core Count | 1 |
| Maximum Core Frequency | 600 MHz |
| Core Voltage | 1 V |
| Корпус | 783-FCPBGA (29x29 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +105C (extended) |
| Memory Controller | DDR2/DDR3 SDRAM with ECC |
| Ethernet | Dual Gigabit Ethernet controllers |
| Serial Interfaces | PCI Express, RapidIO, Serial RapidIO |
| DMA Controllers | 4 |
| Local Bus | Yes (high-speed) |
| Security Acceleration | Integrated (encryption accelerators) |
| Hardware Virtualization | Supported |
| Process Technology | 65 nm CMOS |
| Статус RoHS | Compliant |
Руководство по цоколевке MPC8536CVTAKGA в корпусе 783-fcpbga (29x29 mm)
Цоколевка для MPC8536CVTAKGA (корпус 783-fcpbga (29x29 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8536CVTAKGA.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8536CVTAKGA подходит для 6 применениеs: Wired Networking Router / Switch, Network-Attached Storage (NAS) Controller, Industrial Gateway and Protocol Converter, Telecom Edge and Access Equipment, Secure VPN / Firewall Appliance, Embedded Control-Plane Computing.
Wired Networking Router / Switch
The MPC8536CVTAKGA's 600 MHz e500 core plus dual integrated Gigabit Ethernet MACs make it a natural fit for entry-level to mid-range wired routers and L2/L3 switches. The deterministic PowerPC architecture and integrated DMA offload forwarding-plane operations, while the on-chip queue manager and buffer manager handle packet queuing without burdening the core. At a 1V core rail the part fits fan-less industrial enclosures, and the integrated DDR2/DDR3 controller with ECC lets OEMs use commodity DRAM rather than specialised buffered memory. Compared with a CPU-plus-discrete-NPU approach, the integrated peripherals shrink BOM cost and PCB area, making the 600 MHz grade ideal for SMB edge routers and industrial Ethernet switches.
Рекомендуется
Network-Attached Storage (NAS) Controller
In SMB and SOHO NAS controllers the MPC8536CVTAKGA provides the balance of CPU performance, peripheral integration, and long-term reliability needed for 24/7 file-serving workloads. The 600 MHz e500 core runs file-system and RAID management software comfortably, while the DDR2/DDR3 controller with ECC protects data integrity. The integrated SATA/PCIe interfaces typical of the MPC8536 family let designers attach disk arrays without a separate storage controller ASIC. Fan-less operation at 1V core voltage suits compact NAS chassis, and the extended temperature range supports industrial-grade appliance variants used in factory file servers and edge-storage nodes.
Рекомендуется
Industrial Gateway and Protocol Converter
Industrial gateways bridging fieldbus (Modbus, Profibus, CAN) to Ethernet/IP require a deterministic MPU with integrated crypto, ECC memory, and dual Ethernet. The MPC8536CVTAKGA delivers all three on a single die: the e500 core runs protocol stacks deterministically, hardware encryption accelerators handle VPN/IPsec, and the DDR2/DDR3 ECC controller protects against single-bit errors common in harsh industrial EMI environments. Its 1V core voltage and extended -40C to +105C operating range suit DIN-rail enclosures without active cooling, and the 783-FCBGA package's thermal performance is sufficient when paired with the manufacturer-recommended PCB thermal via array.
Рекомендуется
Telecom Edge and Access Equipment
Access routers, DSLAM line cards, and small-cell backhaul appliances benefit from the MPC8536CVTAKGA's deterministic latency and integrated TDM/Ethernet interfaces. The PowerQUICC heritage makes the part a drop-in upgrade from legacy MPC8xx designs, preserving software investment while gaining hardware encryption and PCIe. The 600 MHz grade targets control-plane workloads (routing table management, OAM, SNMP) rather than wire-speed forwarding, keeping power dissipation low enough for sealed outdoor enclosures. The same 783-FCBGA footprint across the speed and temperature grades simplifies SKU proliferation in a telecom OEM's portfolio.
Рекомендуется
Secure VPN / Firewall Appliance
Small-business VPN and firewall appliances leverage the MPC8536CVTAKGA's integrated hardware encryption accelerators and dual Gigabit Ethernet to deliver line-rate IPsec and stateful firewall throughput at modest cost. The 600 MHz e500 core plus dedicated crypto engines handle thousands of tunnels without software bottlenecks, and the DDR2/DDR3 controller with ECC keeps cryptographic key material protected from soft errors. The compact 29x29mm FCBGA package fits 1U rack-mount chassis, and the 1V core voltage keeps total board power within small-form-factor PSU budgets.
Рекомендуется
Embedded Control-Plane Computing
Beyond networking, the MPC8536CVTAKGA serves general embedded control-plane roles such as industrial printer controllers, medical imaging pre-processors, and test-equipment controllers where deterministic response and ECC memory outweigh raw GHz. The PowerPC Book E architecture supports real-time OS extensions, and the integrated DMA quartet lets peripherals stream data without CPU intervention. The 600 MHz core is more than adequate for control-plane tasks, and the 783-FCBGA package's I/O density lets designers place Ethernet, PCIe, USB, and local-bus interfaces on a single board without bridge chips.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8536CVTAKGA — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8536BVTAKGA | MPC8536CVTALGA | MPC8536EAVTAULA | MPC8536EAVTANGA | MPC8536CVTANG |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Core Frequency | 600 MHz | 600 MHz | 600 MHz | 1 GHz | 1 GHz | 600 MHz |
| Core Architecture | PowerPC e500 (32-bit) | PowerPC e500 (32-bit) | PowerPC e500 (32-bit) | PowerPC e500 (32-bit) | PowerPC e500 (32-bit) | PowerPC e500 (32-bit) |
| Core Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Operating Temperature | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (industrial) | -40C to +105C (industrial) | -40C to +105C (extended) |
| Silicon Revision | C-step | B-step | C-step (L speed grade) | E-step | E-step | C-step (N temp grade) |
| Integrated Ethernet | Dual Gigabit | Dual Gigabit | Dual Gigabit | Dual Gigabit | Dual Gigabit | Dual Gigabit |
| Memory Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC |
Ключевые отличия
- Lowest-cost 600 MHz point in the MPC8536 family (против MPC8536EAVTAULA)
- C-step silicon revision vs B-step MPC8536BVTAKGA (против MPC8536BVTAKGA)
- Extended temperature range for industrial use (против MPC8536CVTANG (N-grade))
Заметки по проектированию
Estimated: the 29x29mm 783-FCBGA package requires a multi-layer PCB with a stitched via array under the thermal pad to meet the package's theta_JB. Without thermal vias the junction-to-ambient thermal resistance can exceed the datasheet value, leading to throttling or shutdown at +105C ambient. Apply at least 4 PCB layers with continuous ground plane beneath the BGA and a via farm of 0.3mm drilled, 0.15mm plated holes on a 0.6mm grid. For sealed enclosures, derate by 10-15% from the ambient maximum.
DDR2/DDR3 routing to the integrated memory controller must be impedance-controlled (50 ohm single-ended, 100 ohm differential for clocks) and length-matched within the byte lanes. Keep the address/command fly-by topology short - exceeding the datasheet length limits will cause setup/hold violations at 600 MHz core speed. Route SerDes lanes (PCIe, RapidIO, SGMII) as 100 ohm differential with intra-pair skew under 5 mil, and provide reference plane continuity under all high-speed traces.
The 1V core rail should be generated by a buck converter with at least 20% current margin above the worst-case core current published in the datasheet. Estimated core current for the 600 MHz grade at typical application workloads is in the multi-amp range; use a controller with power-good output to feed the MPU's HRESET logic. Add bulk decoupling (22uF ceramic + 220uF polymer) close to the package, and 0.1uF+1nF decoupling on every power pin as required by the pin map.
Do not assume the silicon revision is the same across B/C/E suffixes - the peripheral enable registers and errata differ. Read the latest NXP errata document for your exact mask set before bringing up JTAG and DDR training. Also note that the JTAG TAP is software-emulated and requires the e500 core to be released from reset correctly, otherwise boundary scan will appear broken even on a good board.
Информация о соответствии
RoHS compliant per NXP product page and DigiKey listings. AEC-Q100 not applicable - this is an industrial/communications MPU, not an automotive grade part. For automotive applications contact NXP for AEC-Q100 qualified variants.