MPC8536EBVTANG - PowerQUICC III e500 32-bit MPU 800MHz | NXP
Артикул: MPC8536EBVTANG ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2.685,00 |
| 100 | $245 | $24.500,00 |
| 500 | $219.75 | $109.875,00 |
| 1.000 | $198 | $198.000,00 |
MPC8536EBVTANG Обзор
A microprocessor (MPU) is a single-chip processing unit that integrates a central processing core, memory controllers, and peripheral interfaces on one die. The PowerQUICC III family sits within the broader taxonomy of embedded processors -> microprocessors (MPUs) -> communications processors -> Power Architecture devices. The MPC85xx family specifically targets networking infrastructure, telecom, and industrial control where deterministic processing and rich I/O are required.
Key features include a 32-bit e500 superscalar core with dual-issue execution, integrated DDR1/DDR2 memory controller, integrated security engine, four Gigabit Ethernet controllers, dual 10/100 Ethernet, dual PCI/PCI-X controllers, and high-speed serial interfaces including RapidIO. The device supports multiple voltage rails (1.5V core, 1.8V/2.5V/3.3V I/O) per the datasheet description, enabling flexible power tree design.
The e500 core uses Book E instruction set with signal processing extensions and a 36-bit physical address space, allowing access to large memory regions needed in enterprise networking. The MPC8536 integrates hardware-accelerated encryption, table lookup units, and a DDR memory controller with ECC support for robust data integrity.
Typical applications include enterprise routers and switches, telecom base stations, network attached storage (NAS), industrial control systems, and military/aerospace embedded computing platforms requiring Power Architecture compatibility.
When designing with the MPC8536, pay close attention to power sequencing for the 1.5V core rail and the 1.8V/2.5V/3.3V I/O rails. The 783-ball FCBGA requires careful PCB layout with microvia stack-ups and controlled impedance for high-speed SerDes traces.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the MPC8536 for new designs and legacy board refresh.
Аналоги без доработки для MPC8536EBVTANG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MPC8536EBVTANG (тот же форм-фактор и посадочное место) — отличается по Core Architecture, Memory Controller, Part Family, Process Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MPC8536EBVTANGA
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC8536EBVTAKG
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC8536AVTANG
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$108.9 / шт.
Открыть даташит →MPC8536EBVRAHG
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC8536ECVTANG
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MPC8536EBVTANG Максимальные параметры и электрические характеристики
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Part Family | PowerQUICC III / MPC85xx |
| Core Architecture | Power Architecture e500 (Book E) |
| Core Count | 1 |
| Разрядность шины данных | 32-bit |
| Maximum Core Frequency | 1.5 GHz (scaling); 800 MHz for this variant |
| Operating Frequency (this variant) | 800 MHz |
| Physical Address Space | 36-bit |
| Process Technology | 0.09 um CMOS |
| Supply Voltages | 1.5 V (core), 1.8 V / 2.5 V / 3.3 V (I/O) |
| Корпус | 783-ball FCPBGA (29x29 mm) |
| Тип монтажа | Surface Mount |
| Memory Controller | Integrated DDR1/DDR2 with ECC |
| Ethernet | 4x Gigabit + 2x 10/100 |
| PCI/PCI-X | Dual controllers |
| High-Speed Serial | RapidIO interfaces |
| Security Engine | Integrated hardware encryption acceleration |
Руководство по цоколевке MPC8536EBVTANG в корпусе 783-ball fcpbga (29x29 mm)
Цоколевка для MPC8536EBVTANG (корпус 783-ball fcpbga (29x29 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MPC8536EBVTANG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MPC8536EBVTANG подходит для 6 применениеs: Enterprise Routers and Switches, Telecom Base Station Equipment, Network Attached Storage (NAS), Industrial Control Systems, Military and Aerospace Embedded Computing, Single-Board Computers (SBC) for Embedded Systems.
Enterprise Routers and Switches
The MPC8536EBVTANG's 800 MHz e500 core, four integrated Gigabit Ethernet controllers, dual PCI/PCI-X, and hardware encryption engine make it well-suited for enterprise routing and switching platforms. The integrated security accelerator offloads IPsec, SSL/TLS, and packet inspection at line rate, freeing the e500 core for control-plane and routing-table processing. The 36-bit physical address space accommodates large routing tables and ACL databases needed in core/edge routers. Power Architecture compatibility preserves investments in existing routing stacks (e.g., VxWorks, Linux with PowerPC support). The 783-FCPBGA package and 1.5V/1.8V/2.5V/3.3V rail requirements align with standard telecom power tree designs.
Рекомендуется
Telecom Base Station Equipment
The MPC8536EBVTANG suits telecom base station controller boards where deterministic Power Architecture processing, RapidIO backplane interconnect, and ECC-protected DDR memory are required. The integrated DDR1/DDR2 controller with ECC delivers robust data integrity essential for long-uptime base station deployments. RapidIO links enable chip-to-chip interconnect with other baseband DSPs and FPGAs at multi-gigabit rates. The e500 core's Book E instruction set provides real-time interrupt latency suitable for baseband scheduling. Designers should validate thermal performance of the 29x29 mm FCPBGA at elevated ambient temperatures typical of outdoor telecom cabinets.
Рекомендуется
Network Attached Storage (NAS)
The MPC8536EBVTANG's combination of four Gigabit Ethernet ports, hardware encryption, and ECC memory support makes it a strong fit for mid-range NAS controllers. The integrated security engine accelerates AES, 3DES, and SHA operations needed for encrypted filesystem offload, while the e500 core handles file system metadata, RAID management, and network protocol stacks. The 36-bit physical addressing enables addressing of large memory pools used as RAID cache. The 783-FCPBGA package supports high-speed board layouts required between the MPU, DDR2 memory, and SAS/SATA controllers typically used alongside the MPU on a NAS controller card.
Рекомендуется
Industrial Control Systems
The MPC8536EBVTANG serves industrial PLC, SCADA, and motion control platforms where deterministic response and long-term supply stability are critical. The e500 core's deterministic behavior under real-time operating systems (VxWorks, INTEGRITY, RTEMS) suits hard real-time control loops. Multiple PCI/PCI-X buses support legacy industrial I/O cards, while Gigabit Ethernet ports enable plant-floor connectivity. NXP's long-lifecycle product programs support industrial customers needing 10+ year availability. Designers should pair the MPU with industrial-grade DDR2 with ECC and watchguard supervisory ICs for brown-out protection.
Рекомендуется
Military and Aerospace Embedded Computing
The MPC8536EBVTANG's Power Architecture heritage, ECC memory support, and extended temperature options make it a candidate for ruggedized military and aerospace computing platforms. The e500 core's compatibility with Green Hills INTEGRITY-178 and LynxOS-178 RTOSes supports DO-178C and similar certification efforts. The integrated security engine enables encrypted data-at-rest for sensitive payloads. Designers must verify the specific temperature range and conformal coating requirements against the chosen part suffix; the 'ANG' variant identified here may not be the full MIL-spec part. Review NXP's extended temperature and military-grade MPC85xx variants separately.
Рекомендуется
Single-Board Computers (SBC) for Embedded Systems
The MPC8536EBVTANG is widely deployed on Power Architecture-compatible SBCs serving medical imaging, test & measurement, and industrial automation OEMs. Standardized SBC form factors (e.g., VME, VPX, PMC) leverage the MPU's PCI/PCI-X bus and high-speed Ethernet for module-to-module communication. The e500 core's signal processing extensions accelerate DSP-like algorithms used in medical imaging pre-processing and vibration analysis. Pair with a dedicated FPGA companion for I/O expansion. The 783-FCPBGA package footprint is typically managed by the SBC vendor rather than the OEM integrator.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MPC8536EBVTANG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MPC8536EBVTANGA | MPC8536EBVTAKG | MPC8536AVTANG | MPC8536EBVRAHG | MPC8536ECVTANG |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | e500 (Power Architecture) | e500 (Power Architecture) | e500 (Power Architecture) | e500 (Power Architecture) | e500 (Power Architecture) | e500 (Power Architecture) |
| Maximum Core Frequency | 1.5 GHz (family); 800 MHz (this variant) | 1.5 GHz family max | 1.5 GHz family max | 1.5 GHz family max | 1.5 GHz family max | 1.5 GHz family max |
| Memory Controller | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC |
| Gigabit Ethernet Ports | 4 | 4 | 4 | 4 | 4 | 4 |
| Security Engine | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| PCI/PCI-X Controllers | Dual | Dual | Dual | Dual | Dual | Dual |
| RapidIO Interface | Yes | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- Integrated security engine (против MPC8535 (predecessor in family))
- 36-bit physical addressing (против 32-bit-only embedded MPUs)
- Four Gigabit Ethernet ports on-chip (против External PHY-based designs with 2-port MPUs)
Заметки по проектированию
The 783-ball FCPBGA at 29x29 mm has a relatively large thermal footprint but high power dissipation typical of PowerQUICC III devices (estimated 5-12W depending on frequency and peripheral activity). Reference design guidance from Freescale/NXP recommends a multilayer PCB with continuous ground plane beneath the package and thermal vias under the die pad. Estimated: at 800 MHz with all peripherals active, junction temperature rise can exceed 40 C/W without airflow. Conduct thermal simulation with the actual workload before committing to the layout.
The 783-ball FCPBGA at 1.0 mm or finer pitch requires high-density interconnect (HDI) PCB technology with microvias and sequential lamination. Use 4-6 mil traces and 4-6 mil spacing on outer layers for escape routing. Match impedance (typically 50 ohm single-ended, 100 ohm differential) for RapidIO, Gigabit Ethernet, and DDR2 nets. Place decoupling capacitors on the bottom side directly under the BGA power balls with short via stubs.
The MPC8536EBVTANG requires multiple voltage rails (1.5V core, 1.8V/2.5V/3.3V I/O) with specific power-up and power-down sequencing per the Freescale/NXP hardware specifications datasheet. The core rail must reach stable regulation before the I/O rails come up to avoid latch-up. Use a power management IC with programmable sequencing (e.g., NXP PF series or equivalent) and add voltage supervisors on each rail. Decoupling: place 0.1 uF X7R ceramic capacitors within 100 mil of each power ball, plus bulk 22-47 uF tantalum or polymer capacitors nearby.
Common pitfalls include ignoring the boot configuration pin states (which select boot ROM location and clock ratios), failing to terminate unused Gigabit Ethernet ports properly (causing reflections and EMC failures), and under-provisioning the DDR2 memory layout (length matching and impedance control are mandatory). Reset and JTAG signals must be brought out to headers for debug access. Reference the Freescale/NXP application notes AN3645 and the hardware specifications document for detailed checklist.
Информация о соответствии
RoHS, REACH, lead-free, and halogen-free status were not present in the verified web data snippets; engineering teams should request the latest material declaration directly from NXP or Rochester Electronics before production release. AEC-Q100 is not applicable for this networking/industrial-grade processor.
